Week 4 that i had missed and didn't upload so here it is <3

June27 the lizards have attacked again... for this... today we are going to raise the girls and place a mesh June28: I have no idea how they did it... but they got in again!

All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

I should have more room for this one in the next 2 to 3 weeks, then I can start growing her. I am flexing my gro knowhow muscles by keeping this one as small as possible for as long as I need it to without killing it. Sometimes this technique will come in handy so it is good to practice it.

En esta actualización se incluyen 2 semanas ya que por trabajo me fue imposible añadir la semana anterior. El día 15 de Agosto recibió la segunda pulverización de Bacillus Thuringiensis para prevenir el ataque de las orugas. Sigo alternando riego de agua un día con riego de Ascophillum Nodosum al día siguiente. He dejado de regar con Cannazym.

Looks like the stretch has officially come to an end and with it, the first signs of trichome production have started to show up!✨ Unfortunately, the plant stayed pretty small despite being in a 20L pot, which is a bit of a bummer. I was hoping for more size, but hey let’s see what she can deliver in quality! Sometimes the small ones pack the biggest punch. 😏 Excited to see how the buds develop from here!😊

HEY Guys , I've been in a crazy & exciting week really, these contests motivate me to work on my photography and make delicious edibles 😋. after tasting that brownie/muffin everything change!! You guys Can't imagine the damn taste of it. ( I was high about 4hrs after eating a Muffin and there was nothing I could do to chill down a bit Maybe I should pay attention to it's dosage next time.😀 Also Taking Close shots of my buds and my homemade Extraction was really amazing, I enjoyed every minute of it and really worked on them for hours, when I find sth worth it, I always go all in. I put lot of time and effort to the point where I was finally satisfied, with both growing and taking memorable photos of my first grow. All and all, I loved every minute of my time here, made me pay more attention to my ladies, learn from you guys, share sth and have fun. Good Luck to you all & Happy HalloweeD 👻😎

Flowering Week 8

NOTE 1: Afgooey Auto pheno #3 turns out it's a MALE. Resembled nothing like her two sisters ran at the same time. In fact, I had to move her to the 12/12 tent to initiate flowering. Little did I know or expect She would be a He. Lola by the Kinks is rattling round my brain about now ;) FEEL FREE TO HIT THE LIKE BUTTON IF YOU LIKE WHAT YOU SEE ;) 2x4 French Macaron - at the time of this posting, FM is heading into week 8 flower. Second extensive flushing w/fresh rain water due to acidic conditions (ph >5). Been struggling with ph the entire flowering. I speculate ph issues due to over feeding. Ph is roughly 5.8 to 6.0 after flushing. At this point, flushing with plain RO water until harvest. NOTE 2: I've introduced two 5 gallon bubble buckets into the 2x4 grow tent. Both buckets have medium air stones running from a 125 gph air pump. Given French Macaron isn't scheduled for harvest until mid-January, I might not have cutting ready. First grow may have to be from seed. Update later. 3x3 Afgooey Autos and clones from previous grow - Afgooey #1 and #2 are firing on all cylinders. #2 running a bit acidic (>5), so flushed back to neutral with roughly 7-8 gallons of fresh rain water ph at 7.0 to 7.2. Same with clones (i.e., ph very low). Flushed with fresh rain water too. A couple days later plants look so much better. Wait till plants nearly dry before next watering. Trimmed and cleaned up three of the clones growing weird. Felt a bit like trimming a bonzai tree. Let's see how they respond.

We’ve hit week five of flowering, and things are getting really exciting! 🌸 The plant is now covered in trichomes, and many of them are already turning a milky color—such a great sign that things are progressing perfectly. The buds are starting to look really frosty. ❄️✨ I’ve been following the BioBizz week 6 feeding schedule, as it’s almost time to flush the plant—just 2-3 more weeks to go! 💧 I’m getting more excited each day as we move closer to harvest. Can’t wait to see how everything finishes up! 😁🌱

We are out of silica , hope the rice shells help

Fastbuds Meme Video Contest

Need to step up my lighting game. Should install another scrog? or is it too late

Hello Diary, The first week of vegetation on my small farm has ended and so far everything is going well. In order to better remember the arrangement of the plants, they are arranged alphabetically from left to right. On the left is Apollo, in the middle is the Milky Way and on the right is Titan. Milky Way F1 is developing and growing nicely. It grew 7 cm and I am generally satisfied. What worries me a little is discoloration, i.e. light spots on the leaves. I'm not sure about the cause, but maybe it's genetics. I will see and follow what happens. Watering was not frequent, considering the size of the pots, there is a lot of moisture in the ground, so I watered it every 5 days with a liter and a half of water. In the first week, I didn't add any supplements, considering that I mixed a lot of supplements into the soil. Conditions on the farm are satisfactory. The humidity is slightly higher than 50% and the temperature is around 25 degrees. The light is set to 18/6 from the first day of vegetation. I took pictures on the first and last day of the first week, just to see the difference in a week. Here's a quick recap of the week. 30/04/2023 - Day 1. Watering and photography. Officially, the first day of the growing season. Prepared 5 liters of water, lowered the pH. at 6.0 and with that amount watered the Milky Way F1 and its two roommates with about the same amount of water. Milky Way F1 - 4 cm 05/05/2023 - Day 6. Watering. The procedure is the same as 5 days earlier. 06/05/2023 - Day 7. Photography. End of the first week of vegetation. Milky Way F1 - 7 cm That's all for this week, see you soon and thank you all for your support.

I am dropping Bubble Gum OG Autoflower from Ganja Farmer. The seed was scuffed and dropped in water. I will be growing her under Spider Farmer G5000/UVR40 lights. She will be in Athena blended line nutrition. Thank you Spider Farmer, Athena, and Ganja Farmer. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the likes, follows, comments, and subscriptions on my YouTube channel. I greatly appreciate all the support. 🌱🌱 🌱https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

As you'll read below one of these was tossed, the better looking one in fact so only 1 remains right now. Hopefully this one doesnt turn too. Aight so the other day I found another hermie in the very early stages. So I emptied the tent and sat in there in the pitch black for 15 minutes to let my eyes adjust looking for anywhere light could get in. Because I have 2 veg tents in the same room on 19 hr schedules it's impossible for me to have the room the tent is in be pitch black. There was no leaks in the fabric but the air vents at the bottom, even tho I only have 3 open a little bit, let in the slightest amount of light. I had to toss out a mandarin cookies R1V2, a bwiz x Rocberry and a gushers. I found a male flower on a Hawaiian snow x wc x g33 on a lower but instead of tossing it I removed all the lowers and am going to check daily to see if its aight or not. I ordered a ac infinity 4 inch fan, some light proof ducting and a intake carbon filter to be able to set up a intake and close the vents. Very little pollen may have dropped which could seed everything but I might have found it just in time we will see. I almost retired on the spot but I'll give the intake fan a shot as a last ditch effort. Otherwise I would have to remove the veg tents or have intake fans and no open vents for all tents. Use the code bangdang for 10% the following sponsors.. @greenbuzzliquids @rainscience_growbags @gorilla_grow_tent @growlightscience.led

Second week of bloom: steady growth is visible on both. I incresed the bloom nutrient ratio to 3ml/L Water. Atm I have to water them everyday with 1L Water, I have the feeling that my dehumidifier is pulling more moisture from the soil that I would have liked. 2nd picture shows that both Exodus have different shades of green although both follow the same schedule and feed plan. I switched positions in the tent, maybe it’s due to the air circulation. As always I‘ll add more pictures throughout the week. Now back to Final Fantasy VII Rebirth 😘 Update 05/03: Took a couple of pictures plants are gaining in height, I added 0.5ml Calmag to the Water once this week. No sign of Cal or Mg deficiency but I added it to prevent during this major height growth phase.

Special Christmas Stress would be last weeks summary. Still trying to figure out what the hell is happening to my plants. As there are some major problems appearing on one of them and symptoms on all of them. It looked like there were too much nutes so I tried to flush them out with water. Still the problem went on. Then I started to add calmag since 2 plants went too white. Which appearently is iron defficiency. After 4 days I’m starting to add full nutes but now I’m not regulating ph but leaving it for 7.9 since my runoff water is about 5.8 and probably locking out K N and P. Will see how this will roll out. Also made a simple DIY scrog net for the tallest plant. And ordered microscope.

NOTE 1: Afgooey Auto pheno #3 turns out it's a MALE. Resembled nothing like her two sisters ran at the same time. In fact, I had to move her to the 12/12 tent to initiate flowering. Little did I know or expect She would be a He. Lola by the Kinks is rattling round my brain about now ;) FEEL FREE TO HIT THE LIKE BUTTON IF YOU LIKE WHAT YOU SEE ;) 2x4 French Macaron - at the time of this posting, FM is heading into week 8 flower. Second extensive flushing w/fresh rain water due to acidic conditions (ph >5). Been struggling with ph the entire flowering. I speculate ph issues due to over feeding. Ph is roughly 5.8 to 6.0 after flushing. At this point, flushing with plain RO water until harvest. NOTE 2: I've introduced two 5 gallon bubble buckets into the 2x4 grow tent. Both buckets have medium air stones running from a 125 gph air pump. Given French Macaron isn't scheduled for harvest until mid-January, I might not have cutting ready. First grow may have to be from seed. Update later. 3x3 Afgooey Autos and clones from previous grow - Afgooey #1 and #2 are firing on all cylinders. #2 running a bit acidic (>5), so flushed back to neutral with roughly 7-8 gallons of fresh rain water ph at 7.0 to 7.2. Same with clones (i.e., ph very low). Flushed with fresh rain water too. A couple days later plants look so much better. Wait till plants nearly dry before next watering. Trimmed and cleaned up three of the clones growing weird. Felt a bit like trimming a bonzai tree. Let's see how they respond.