Topped again and final structure now 1-2 more weeks veg

🌿 Week 11: Frosty Heights & Real Talk (Flower Week 6) First off, apologies for the slight delay! Usually, I drop these updates on Monday, but I was out celebrating my 25th birthday yesterday and, well... let’s just say things got a little out of control, haha! But I'm back in the tent now, and the girls didn't seem to mind the extra day of peace. Welcome to Week 11. We are deep in the flowering phase (Week 6), and the tent is looking like a winter wonderland. But let’s keep it real – while the frost is insane, it hasn't been a "perfect" run since it’s my first experience with living soil. Here’s the honest breakdown. 🛠️ The Big Defoliation & Adjustments The canopy got so thick that I had to perform one last major defoliation. I removed a significant amount of the large fan leaves that were shading the lower bud sites. It’s always a tough call this late in the game, but it was absolutely necessary to get that light penetration down to the secondary colas and improve RH. Combined with raising the entire tent to save the tops from light stress, the environment is now much more balanced. If you look closely at some of the upper leaves, you can still see a bit of "tacoing" (curling edges) from the previous light intensity and buds on the top of the sweet spot are not very well bulked because of heat stress by light. I caught it likely and the "scars" remained. 🌱 Organic Struggles & Success The "Autumn Fade" is hitting harder than I expected. The remaining fan leaves are yellowing quite aggressively. In living soil, this usually means the nitrogen is running low what I read as the plant focuses everything on the buds. I’m letting nature take its course, but I’ll keep an eye on it to make sure they have enough gas to reach the finish line. • The Scrog Management: My canopy isn't perfectly level. I have a few "underdogs" getting shadowed by the main colas even after the defoliation. It’s a lesson for next time – I need to be even more aggressive with LST early on to keep everything in one uniform plane. 📊 Stats & Environment: • Genetics: Banana Purple Punch Auto (FastBuds) • Status: Bulking phase. • RH: Dropped to 45%-40% – absolutely critical now to prevent any bud rot in these dense clusters. • Temp: 22-26°C. • Aroma: A heavy mix of tropical fruit sweets and gassy undertones. It’s not a catalog grow, it’s a real grow. The "girls" are finishing strong despite the big hiccups. Thanks for riding along with me growmies, one love! 💜🤜🏼🤛🏻 Wondrej

Day 85 Day 50 Flower Friday 17/05/24 She seems to have exploded since I sorted the temps. The tops seem to be swelling again normally, fox tailed to shit at very tops but all under are nice and swelling up more. Last Feed today. Day 87 Day 52 Flower 19/05/24 - Sunday. Water today with calmag She really has recovered well, that 1 week of stress really did her dirty for tox tailing. But, she has recovered and now has fist sized nuggets forming everywhere. She is a beast 💪💚 Day 89 Day 54 Flower - pH water , 5l 2.2l run off. Day 90 Day 55 flower 22/05/24 - Wednesday So I'm debating, chopping her at end of this week, or trying to allow another week just to ripen further, all depends on my tre lime auto for space. She looks ready, all trichomes cloudy with tiny partial amber's showing. I would love to see more amber as I like my smokes to be sleepers.

Outside temperatures are getting hot, 30+ degrees, meaning hot inside the tent, night temperatures hotter than day in the photo period tent, but Blueberry ghost og is budding beautifully, with purple starting to show, girl scout cookies is looking frosted and stardawg an critical orange punch auto close to harvest, mothers are growing nicely and I should be able to clone the new seeds soon. I have harvested the sour orange auto and some white rhino also, hanging now, will update weight next week 🦏🦏😀😀

Rinçage à débuter.

D49 The Purps is rocking. I hope she's near done with the stretch as she's now approaching 40" tall. She's got a ton of bud sites and they're all plumping up and getting frosty. She's been pretty hungry and thirsty, demanding 3 litres of water almost every day. Her PPMs have been running in the low 900s with stable PH. She's due for a rez change and will get one tomorrow after 2-weeks of top-ups. Super happy with the way she is growing and she may actually finish within her 6-7 week advertised harvest time. 🤞 Thanks for tuning in ✌️

Autos have been transferred, looking good so far..

Did a little HST and filmed some Blurple Tent Action for my boy Ferenchy.

Co2 is kicking some ass, causing some of the mothers to grow huge in 7 days! Autos are producing slowly, or maybe im just impatient. When the clones and seedlings are ready for a light change, the autos are going outside I think Added a security monitor to allow me to watch the garden remotely and record any unforeseen motion. I really like growing in 2020, technology is a great companion to the garden and gardener

Needed to go in big pots will sort that tmro watered late today they will be fine again once in bigger pot these have been on 12/12 for a few days. Will pl out the gavita they need some hear for a week or 2 led lights not powerful enough now for the plant age it's not growing much now fed today water tmro with transplant

!!💜💜

Very nice plant to grow. Beautiful flowers covered with trichomes. The smell is very lemon citrus flavourt. She gave a bit of a stretch. I think she isn’t the biggest yielder but definitely quality over quantity. Later on the results. Very pleased sofar! I underestimate the density of the buds. Dry weight 375 gram of 5 plants. Pheno number 2 yielded almost 100 gram! Powerfull lemon flavour with a touch of sour. Running pheno number 2 again!

Вторая неделя прошоа на мой взгляд удачно. Один раз случайно перелил, но растиха быстро отшла. В целом полёт нориальный, видимость отличная, поводадля беспокойства нет. Увидимся на следующей недели😀

.

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

Tropicanna Poison XL Auto- Outside W10F6 8/17-23 This past week has been rainy and overcast from a tropical storm with temperatures mostly in the upper 80s. We have Hurricane Erin approaching the Bahamas heading northeast with wind gusts of 30-40 MPH. While we won’t be directly hit by the storm, we will get the outer bands of heavy winds and rain. To protect my plants, I brought all the girls inside on Tuesday 19th in preps for the storm. I inspected each one for bugs, rot or anything unusual. She is free and clear of any rot or bugs 8/19 Tropicanna Poison XL auto is 53 days from germination. Sweet Seeds says 60-75 days to harvest so she needs about a week more. Next week with the hurricane approaching, we are expecting rain for most of the week. Given the pending weather conditions for the next couple of weeks, the remainder of the grow will be in the tent where I can control the environment. I also will be using the air conditioner to drop nighttime temperature and maybe bring out pink and red colors. The stems show pink so I’m hopeful. Thank you all for your continued support and encouragement. Your likes and comments motivate me to keep sharing my journey. Stay green, growers love 💚🌿 💫Natrona💫

Lil younging coming good cant complain.... last two are 2 of 6 mothers for the lil youngin which I took when they were about that size with a bit more aggressive training.....big girl flourishing looking like they due a cut....happy growing

Beautifully colored 😍 It still has signs of nutrient deficiency, but it's nothing serious anymore 😉 And she had brown spots on her leaves, for all I know, it's too much calcium and magnesium, so I'm not going to add him next week.