Likes
Comments
Share
@Localbudz
Follow
What a run!!!! my first grow was a massive success a wet weight of 3696 Grams. 16 colas in total from the V-8 manifolding technique i used on my two ladies. The average weight wet of each cola was 81.2 grams! I have this haul back in my tent ⛺. Excellent air flow not directly at the buds. I have the humidity at 50%. I expect a 10 to 12 day drying period with a 3 week minimum cure. I am taking a short break and starting a new crop of 4. Will be switching to either dwc or autopots. Have sour jack from crop king seeds still looking for an Indica. Will be running two sativa two indica under my twin TSL 2000. Check back for dry weight and pics of this first of many grows from Localbudz.
Likes
39
Share
Se realizó una defoliación en la parte más baja y en las 2 hojas más grandes de la parte superior para que pudiera entrar de mejor manera la luz a los brotes más pequeños. Se aplicó Voodo Juice para las raíces y Top Bloom para la floración, ya todas tomaron de buena manera el cambio del fotoperiodo. Seguimos 👽 ...
Likes
5
Share
Flowering day 73 since time switch to 12/12 h. Hey guys :-) Finally the time has come . The lady was harvested and hung upside down in the dry tent 😍. Before that, she stood in the drying tent in complete darkness for 2 days and the large leaves were removed. The small leaves stay attached during the drying process so that they protect the buds and allow them to dry more slowly and evenly :-) . In the dry tent, the temperature is 18-19.5 degrees and the humidity is 54-58% 👍. In this environment they are now allowed to hang for 10-14 days before they are fine-tuned and trimmed clean by hand. then after trimming they come to ferment for 6-12 weeks in dark jars with bobeda packs 62% to keep the perfect humidity. After a few weeks, the Boveda packs 58% are used so that they can slowly dry out :-) . Of course there is one last update after trimming. Until then, I wish you a lot of fun with the update. Stay healthy and let it grow 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://gardenofgreenseedbank.com/candyland/ Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany
Likes
29
Share
@DreamIT
Follow
Sponsored by: ORIGINAL SENSIBLE SEEDS-💡VIPARSPECTRA💡-💐GREEN BUZZ LIQUIDS💐-🛠️WEDRYER🛠️ 28/7 this beauty is growing monstrously. the two lower branches have divided themselves into two apical ones, very nice to see, very particular. these days it will be cut to see how it behaves in cloning and will be put into flowering early next week. Yeah! 2/8 grows really luxuriant! beautiful and with a scent of orange in the background. I can't wait to see it in bloom __________________________________________ Personal advertising (contains affiliate links) __________________________________________ 🦄Highest quality seeds since 1992, a real guarantee! (no affiliate link) ✅https://bit.ly/Originalsensibleseeds __________________________________________ Did you know that Green Buzz Liquids fertilizers are 100% vegan? A complete line of products ready to give the best to each of your plants! Visit the site and see my journals to see how they work 🦄 🤯 And with the code "dreami t" you will immediately receive a 15% discount on your purchases ✅https: //bit.ly/GreenBuzzLiquidsPro __________________________________________ 👀 Are you looking for a good lamp to start with? 👀 🌞Viparspectra has something more than the others, take a look at their site. ⏩ Use "GDVIP" for an extra discount or "DREAMIT3" for an extra 5 %% discount 👀 Search for it on Amazon ✅Amazon USA: https://amzn.to/30xSTVq ✅Amazon Canada: https://amzn.to/38udUVe ✅Viparspectra UE: bit.ly/ViparspectraUE ✅Viparspectra USA: bit.ly/ViparspectraUS ______________________________________________ 🌈 Tired of blowing on your weed hoping it dries quickly? Check out the Wedryer website! You will find a well-made accessory that will help your weed dry in just 8-10 days without the annoying risk of finding mold or other annoyances! (no affiliate links) ✅https: //bit.ly/Wedryer_ ______________________________________________ 📷🥇Follow the best photos on Instagram 🥇📷 https://www.instagram.com/dreamit420/ Backup https://www.instagram.com/dreamit4200/ 🔻🔻Leave a comment with your opinion if you pass by here🔻🔻 🤟🦄💚 Thank you and good growth 💚🦄🤟
Likes
17
Share
@Kirsten
Follow
16.2.25: I decided to check out the lower canopies of all plants to see if I need to get rid of any foliage. I did get rid of a few small branches and leaves. However, whilst I was doing this, I saw more garden pegs from my LST remaining. There were about 6 or more in Pink Mist alone. Additionally, on Watermelon, there were some left in, too. I'm so annoyed to see that because the plants are really stretching, and I could've potentially disrupted this by leaving the pegs in for all this time without realising it. 🤞 that I haven't compromised things too much. We'll see. I watered today with 2ltrs of dechlorinated water PH'd to 6.3 containing the following nutrients; ♡ .8g Green Leaf Nutrients PK booster ♡ .5g Ecothrive Biosys I ordered quite a few things for the garden. I got Greenleaf Nutrients Sea K(elp) and Mega Crop Parts A+B. To go with their PK Booster I got last month. I'm excited to try it all together. Next run, maybe just using these. We'll see how it goes. 18.2.25: The plants are going crazy for water! Everything is getting used right up so fast! Today, I decided to add some more Black Strap Molasses to add some carbs and other micronutrients. I'll add the jar with the label in the photos section above. I watered a very small amount to each plant. What I put in: ♡ Black strap molasses 150g ♡ 2g Sea K(elp) Greenleaf nutrients. I dissolved everything in 4ltrs of dechlorinated water PH'd to 6.4. 19.2.25: I received the majority of the garden purchases that I made. I'm still waiting for the Ecothrive Life Cycle. I wanted to top dress, but it's been delayed unfortunately. I am using my Greenleaf nutrients products which I bought on Amazon. I got the Mega Crop 2 part system Part A and Part B. I have the Sea K(elp), and the bud explosion PK booster. I really wanted to get some of their sweet candy asking read many positive reviews. Unfortunately, for me, this is unavailable to buy currently. So that's a little disappointing. I needed to do a good watering so when my nutes were delivered today, I got excited 🤗 I watered 2ltrs of dechlorinated water per plant, PH'd to 6.4, containing the following nutrients: ♡ 1g Mega Crop Part A ♡ 1g Mega Crop Part B ♡ .5g Sea K(elp). The plants drank this up within a few hours. I'm going to try and hold off on watering in hopes that my Ecothrive Life Cycle will arrive so I can top dress and water it in then. 20.2.25: My Ecothrive Life Cycle arrived yesterday, and the plants are ready for their top dress and a good watering in. I have some Biobizz Light Mix, Canna Coco,and perlite. I'm going to use this as a base to mix my amendments in. I'm going to fill my 5 gallon bucket with about 4.5 gallons of my top dress mix. I will distribute this across 6, 4-5 gallon pots. Then I will water in well with Greenleaf nutrients Mega Crop Parts A+B and Sea K(elp). I've made a crude attempt to video mixing my top dress. Don't listen to the audio. lol, my YouTube didn't stop playing whilst I recorded this 😂 So anyway, I added the following amendments to the above base mix of 4.5 gallons; ♡ 3 TBSP Ecothrive Life Cycle ♡ 3 TBSP Vitalink Bat Guano ♡ 3 TBSP Ecothrive Charge ♡ 1 TBSP RHS Mycorrhizal Fungi granules ♡ 6 TBSP Ground Cinnamon.
Likes
22
Share
Likes
15
Share
She’s doin amazing. She’s always happy and is taking the skrog very well. She’s by far my favorite plant I have goin.
Processing
Likes
12
Share
19.08.2020 - water with plain water 21.08.2020 - nutrient feeding. 23.08.2020 - started lst/nutrient feeding and recharge watering
Likes
2
Share
I’m measuring plant biomass this time around: plant HEIGHT, leaf WIDTH and CANOPY width for as long as possible, before tent space MAXED OUT. Target maximum plant height - 36”- 40”. Allowance for canopy width expansion of 2 plants in a 2x4x6 tent - varying between 24” - 36” from late vegetative stage through flowering. This is a stretch as far as space goes. One single plant would have be enough to fully fill the entire canopy of multiple colas. In other words, although one can legally grow up to 4 medicinal plants in Canada, and I chose to grow 2 of them, that does not necessarily mean extra yield. Plants are thriving and read to be flipped into flowering stage next. Light intensity increases and so does DLI. PPFD=683 and DLI=44.1. Photoperiod changes to 12/12 in week 6
Processing
Likes
10
Share
this week has had its ups and downs and if it wasn't for my little apprentice it would have all gone too shit.... she was able to keep everything in the tent stable while i was away!!
Processing
Likes
14
Share
Today 7/30/19, day 57 and the start of week 9. I'm still continuing to alternate between days with my pesticide treatment (especially after finding that bug living on one of hulkberries fan leaf) and thrive alive green daily foliage spray as a prophylactic solution against any possible pests or mold going into these last few dog days of veg. I will flush them with distilled ph'd water for two days this weekend in preparation for flower. Then I'll start them on some "flower fuel" bloom booster on top of my secret for success flower recipe at 1/4 of the recommended strength. Outside of that still no adverse issue to report for the end of the 8th week. After my last trim, they both have responded very nicely, I was kind of worried about fat banana stalled growth. But one thing I noticed when I topped her at the 6th node, yes the main stem stopped growing but it developed many bud sites up and down every stem. Whereas hulkberry was topped at the 8th node, she has mainly focused on developing long stems and only 2 or 3 bud sites along her stems. Even though hulkberry in structure, is much bigger than fat banana and has a way bigger root system. Fat banana is bushier and has developed way more bud sites than hulkberry. I can't tell which strain will yield the most at this point only time will tell! Also, a big shout out to "J"@RQS, thank you for the excellent customer service. Another reason why Royal Queen Seeds is top 3 in breeding!!
Likes
17
Share
@Elpicor
Follow
D47 Flowering Week n° 2 started, I will pump up nutrition. I was saying this is the last time I removed big leaves and those that hinder buds, that was five times ago, I honestly didn't think I would get this size. D48 Strawberry pie survive to -4 c° last night, to day air temperature will be 12 degrees... In the Freedom Pic you are seeing a marijuana leaf and behind it a magnificent mountain panorama but you do not see what is in between which is the most important as often happens in life what is important you do not see ... what is it ? it's the clean fresh mountain air.
Processing
Likes
10
Share
Week 1 - Day 1 20L Super Air Pots with a bottom layer of clay pebbles, (an inch deep at the centre point) and topped off with Growdog’s 70/30 coco perlite mix. The tops of the pots are covered by green plastic water distributers to evenly spread the water from the 12” watering rings. 2 lights; each 300W actual draw, currently inside the tent. 2 more coming next week to make a total of 4, across the 6 plants achieving a true watt draw of 1200W. Aiming for 1g/watt Germinated seeds from FAST BUDS, were planted and hand watered using tap water pH’d to high 5.8 to low 5.9 with H&G Roots Excl. giving a nice PPM of 362 to start. The BudBox tent is a 2x2x2m, using a Medusa Boosted XL run off trays to a waste brain were the run off can be tested. This will then be recirculated into the feeding tank again. The feed tank will a standard 100L water butt, retro fitting pumps inside for Feeding and Pump to waste - for cleaning the tank out each week. Another 100L water butt will contain a store of filtered RO water which will fill the feeding tank. A 10L PureMate humidifier is set at 65%, along with 2x RAM 16” oscillating wall fans which are mounted to the top of the tent for maximum coverage - set to lvl1 on swing giving the 25°C. No extraction yet. This is ready and waiting. 8” HyperFresh fan with a RHINO 8”x600 pro filter. We are using 8” acoustic ducting.✌️🏻 Week 1 - Day 2 No change. Keeping the new environment stable is difficult. The humidifier is not large enough for the space. Week 1 - Day 3 Fed PH RO water this morning. Trying to keep the humidity up inside the tent. They have popped up! It begins :D Did a feed of 5.8PH RO with CocaA&B 0.4ml/l, Roots excl 0.3ml/l, Calmag 0.2ml/l for a 150PPM. 300ml was used to moisten the coco per pot. Extraction fully connected. Environment stable at 23-24°C, trying to stay at 23.3°C. Humidity fluctuating 47-60%, humidifier struggling, but hopefully be okay. Week 1 - Day 4 All 6 are up and reaching. Husks hopefully will pop off soon. Will be doing another small feed this evening to keep the coco moist. Little leaves have appeared!! Fed another 300ml, 5.8PH @ 151PPM/ plant. Week 1 - Day 5 All shooting up now, tallest at 5cm down to 3.5cm 🌱 I gently helped the last 2 husks off the smallest ones to hopefully even them up. Gave the coco 1L of RO water around the edges. Week 1 - Day 6 Nothing to report this morning. Another PPM feed to be done shortly. Soaked the coco until run off with around 3-4L per pot using 5.8PH nuit water; 0.4 Canna A&B, 0.2 Calmag, 0.3 Roots Excl. 152PPM. First time we tested the Medusa brain - works well and pumps away to the feed tank, need to change one of the low trays to be a boosted tray for better drainage. Giving 5 boosted trays and one normal. Hand feeding up until this point, but will connect up the automation in the next week. Week 1 - Day 7 Strongest are growing around 1cm a day now. Tallest 6cm, smallest at 4cm. Looking forward to next weeks progress :) Bought a wet&dry vac - best thing ever!! Haha. Cleans everything in sight plus all the water from the dirty run off. Lifted all the pots, still a good weight to them so no feed or RO water today I think. Bring on week 2! 💪🏻
Likes
4
Share
@Rlhjr413
Follow
End of week 2 with mid week video
Processing
Likes
6
Share
TUESDAY 9/3: She's still branching out and budding up.👍 WEDNESDAY: I was out at the property for awhile today, hosed off the horsies and cleaned their hooves really well. I was there long enough that I was able to move the plants into direct sunshine for an extra couple hours. I fed her with a half-gallon of water including bembe, terpinator, tiger bloom, beastie bloomz, armor si, and big bloom...just enough to wet her whistle. THURSDAY, FRIDAY, SATURDAY, SUNDAY: I was sick as a dog . 2-day stomach virus, followed by an acute pancreatitis attack... 😷 MONDAY: I gave her about a half-gallon of aquarium water with some bembe, beastie bloomz, and tiger bloom.
Likes
3
Share
I’m a bit stunned by the size of these plants! 😲🌿 Wow, in 7 L pots they are performing really well! 💪🌱 One of my plants had some hermaphrodite flowers early on 🌸⚡, so I did a flush 💦 to stabilize it, and now it’s going full into flowering 🌼🌞. I’ll keep monitoring 👀🔍, but I think it was just a reaction to high PPM in the soil ⚗️🌱. My experience with autos is limited, so I’m exploring methods that work well and give good results! 🌱✨🌿.
Likes
17
Share
Travasare tutte le piccole alcune hanno già preso altre meno ma con calma sono sicuro che andranno alla grande e niente prima esperienza in sog con una genetica non ancora stabilizzata per tutto. Questi sono semi di prova di orangina ma non ancora in commercio e sto facendo una orova per conto di un mio amico grower in Spagna spero vi piaccia la crescita🙏 Ha sto provando a darli acqua da sotto 10 litri alla volta
Likes
3
Share
@Bluemels
Follow
Tag 25: Die Pflanze ist ordentlich groß geworden in der letzten Woche.