Likes
Comments
Share
@MaxMo8
Follow
I cut it today and it was a nice plant 🍃 and I faced some difficulties in the beginning, but I had a challenge. I thanks to everyone who supported me . I will keep you posted after dry .
Likes
14
Share
Que pasa familia, vamos con la cosecha de estas Rainbow Melon de FastBuds, las flores son bien compactas y van repletas de resina, son muy pegajosas, tienen tonos verde oscuros bien bonitos, y tiene unos aromas dulces y tropicales bastante marcados. Es una cepa normal de cultivar, es de ciclo de 2 meses y medio y bien agradecida, tiene buenos satélites. Hasta aquí todo, Buenos humos 💨💨💨
Likes
518
Share
@yan402
Follow
🌸🍏✨🍭🌸🍏✨🍭🌸🍏✨🍭🌸 Hi and welcome to another Kannabia grow! This time I’m running their Apple Fritter (feminized photoperiod). She’s going to veg under 24hr light and be manifolded. Still cleaning the rest of my Candy Cream GF (11.04.25) — going to sow the seed tomorrow (12.04.25) *been lazy, sowed on 14.04.25 🌸🍏✨🍭🌸🍏✨🍭🌸🍏✨🍭🌸 --- 💭❗💭❗💭❗💭❗💭❗💭❗💭 ❗Events & thoughts worth noting❗ 💭❗💭❗💭❗💭❗💭❗💭❗💭 12.04.25 (GW1) – Cleaning + flushing the old coco coir. Might need to add another brick. *No new brick needed ✅ This is how I recycle my coco coir — fast, cheap, no BS. 🌿 Harvest plant ✂️ Chop roots small — they stay in for structure (organic perlite) 💦 Hot water rinse — remove salts & dust 🍶 Pre-soak with light feed:   Micro 10ml   Bloom 0ml   GreenBuzz 10ml   Cal-Mag 60ml   FFJ/FPJ 10ml (new disgusting batch)   pH down (citric acid) ♻️ Media stays — Roots stay — Back in service. 14.04.25 (GW1) – Planted seed in final pot ✅ 16.04.25 (GW1) – Did last tent clean up + setup ✅📸 17.04.25 (GW1) – Seed germinated 🎉📸 — roughly 48hrs in final pot. Solid start👌♥️ 23.04.25 (VW1) – Minimal burnt tips 📸 — not progressing, not a concern. 26.04.25 (VW1) – Started using the new batch of FPJ/FFJ https://growdiaries.com/diaries/266849-grow-journal-by-yan402 30.04.25 (VW2) – Increased TriPartMicro & GreenBuzzBloom 10ml → 15ml 03.05.25 (VW2) – Increased TriPartMicro again 15ml → 20ml, topped the plant, and added final layer of clay pebbles around the base, trimmed side branches and did LST in preparation for "manifold" 📸 08.05.25 VW3 finished manifold📸 13.05.25 VW4 Increased TriPartMicro to 30ml and GreenBuzzBloom to 20ml. 15.05.25 VW4 Done defoliation and LST 📸 18-19.05.25 VW5 pruned all the shoots bellow my "mains" and did a full defoliation📸 24.05.25 VW6 increased GreenBuzzBloom to 30ml 04.06.25 VW7 did a cleanup📸 11.06.25 VW8 increase TriPartMicro to 40ml 17.06.25 (VW9) – Final structure pass 💈🌿 Did a clean perimeter prune + removed weak shoots. Ended up with 12 tops, was aiming for less, but she made the call Didn’t fight it, just shaped it the best I could Airflow’s good, structure’s stable 🛑 No more cuts until post-stretch Pics coming shortly 😘 Flip coming soon — we’ll see how she handles it. 20.06.25 VW9 Switched lighting to 12 hours, may the stretch begin 🤞 22.06.25 VW10 Did a good LST session,made some pics, and came to some conclusions and a small change of plans: Originally planned for 8 mains — long, spaced colas and maybe a couple stronger “titans” if she wanted to go that way. But she’s showing me something else, and I’m not here to fight her — just guide her. Now after stretch, I’m keeping side shoots only if they: Fill real canopy gaps Don’t crowd neighboring tops (minimum 15cm spacing) Aren’t growing into walls or toward the next plant Anything too close, too low, or heading into shade gets removed. No point forcing it. Looks like I’ll finish with 14–16 solid tops, depending on how she settles. I’m just trying to give each one enough light and space to stack properly. No overcrowding, no larf — just letting her do her thing with a bit of structure. Increased Tri Part Micro to 50ml as well. 28.06.25 VW11 one week since I flipped to 12/12 and she is stretching nicely, a bit shy in showing pistils compared to the Fantasy Feast regulars I have in the same tent. 29.06.25 VW11 increased GreenBuzzBloom 30→ 60ml 06.07.25 FW1 TriPart Micro: 50→ 30ml TriPart Bloom: 0 → 20ml Home-made FFJ/FPJ (Watermelon + Pumpkin): 10 → 30ml 12.07.25 FW1 GreenBuzzBloom 60 →40ml, TriPart Bloom: 20 → 60ml, fpj 30→60ml 19.07.25 FW3 Got some bleached tops, been out and about at job interviews and didn't notice a last minute stretch spurt 😭, should recover fine though plenty of time left 😁 22.07.25 FW3 TriPartMicro 30→20ml , TriPartBloom 60→80ml , GreenBuzzBloom 40→50ml 24.07.25 FW3 Cal-Mag 60→40ml 26.07.25 got thrips but handled them with extra airflow and defoliation. 29.07.25 FW4 GreenBuzzBloom 50→20ml, Home-made FFJ/FPJ (new batch) 60→120ml 31.07.25 FW4 Home-made FFJ/FPJ (new batch) 120→200ml 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 🌿 Day to day tasks & actions 🌿 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 02.08.25 FW4 – Fed 5l of #1 → 2l runoff 03.08.25 FW5 – Fed 5l of #1 → 2l runoff 04.08.25 FW5 – Fed 5l of #1 → 2l runoff 05.08.25 FW5 – Fed 5l of #1 → 2l runoff 06.08.25 FW5 – Fed 5l of #1 → 2l runoff 07.08.25 FW5 – Fed 5l of #1 → 2l runoff 08.08.25 FW5 – Fed 5l of #1 at 75%→ 2l runoff 09.08.25 FW5 – Fed 5l of #1 at 50%→ 2l runoff (*RUNOFF reused for tomato plants) 🍶💧🍶💧🍶💧🍶💧🍶 💧 Nutrients in 30L #1 🍶💧🍶💧🍶💧🍶💧🍶 💧 TriPart Micro: 10 → 15 → 20 → 30 → 40 → 50 → 30 → 20ml = 0.67ml/L 🍶 TriPart Grow: 0ml = 0.00ml/L 💧 TriPart Bloom: 0 → 20 → 60 → 80ml = 2.67ml/L 🍶 GreenBuzz Bloom: 10 → 15 → 20 → 30 → 60 → 40 → 50 → 20ml = 0.67ml/L 💧 Cal-Mag: 60 → 40ml = 1.33ml/L 🍶 Home-made FFJ/FPJ (new batch): 10 → 30 → 60 → 120 → 200ml = 6.67ml/L 💧 pH Down: Citric acid (BuxXtrade) — adjust to ~pH 6.0 📦 TOTAL: 360ml per 30L 🔬 12.00ml/L 🍶💧🍶💧🍶💧🍶💧🍶 ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ ✂️ Tools & equipment ✂️ ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ ✂️ 2× MarsHydro SP3000 ⚙️ MarsHydro 150mm ACF Ventilator ✂️ Trotec dehumidifier (big unit) ⚙️ Mini no-name dehumidifier ✂️ Kebab skewers (LST – stainless) ⚙️ Wire + roast skewers (LST assist) ✂️ Scissors (HST) ⚙️ Vacuum (for spills & cleanup) ✂️⚙️✂️⚙️✂️⚙️⚙️✂️⚙️✂️⚙️✂️⚙️ --- 🍏🍪🌬️🍬🍏🍪🌬️🍬🍏🍪🌬️🍬 Apple Fritter (Kannabia Seeds) 🍏🍪🌬️🍬🍏🍪🌬️🍬🍏🍪🌬️🍬 Species: 50% Indica / 50% Sativa Genetics: Sour Apple × Animal Cookies THC: Up to 25% Effect: Euphoric, relaxing, creative Flavor: Sweet, fruity, pastry notes Flowering: 56–63 days Resistance: High Indoor yield: 450–500g/m² Outdoor yield: 600g/plant Structure: Strong, bushy, dense buds
Likes
35
Share
@McBubatz
Follow
3. Woche Wachstum startet wieder tip-top, Fatty ist gesund und munter und wächst wie wild 😁. 19. Tag Wurde bisschen entlaubt, nur unten 4 Fächerblätter. Oben die großen soweit möglich unter die Seitentriebe gebogen.
Processing
Likes
10
Share
@FyahBurn
Follow
Début de 3 ème semaine. 1 d'EC dans la terre. Je commencerais à amener 1 ml de grow biobizz en milieu de 3 ème semaine pour monter à 1,3 d EC. Les plantes restent assez courtes "ramassées" car les lampes ne sont pas très hautes à 52 cm des apexs. Finissez bien l année "aussi mauvaise fut elle" essayons de la finir avec plein d espoir pour l année 2021 ! 💚💛❤️ Blessing mama Earth 🙏
Likes
210
Share
So this is the new setup I got👍🤘 i will be ending this diary and starting a new one with all my plants in it. This 8x8 tent is massive and the fc4800 is a bright as the sun beast 💪pretty heavy for the size but that's because it's built soild💪 PLEASE watch the video and leave a comment 🤘🎸🥁 rock n Roll a joint🤘
Likes
2
Share
@Cornfed
Follow
Welcome to week 3 of veg. They’ve been growing about 1” per day lately. I’m planning to SCROG these three girls with a portable scrog screen. Supplies arrive today and I’m anxious to test this. (Note that my portable scrog screen didn’t work, so I’m using a 2x4 stretch screen). So far the self watering feeders are working well. The reservoir ph does tend to climb, so I make regular adjustments by adding RO water to the nutrient mix and using ph down. The PPM of the nutrients is climbing too, so adding RO dilutes that. As an example, it had climbed from 925 ppm to 1080 ppm overnight. I diluted it back down to 880 ppm. Saturday: installed scrog net Sunday: checked reservoir ph (6.4) and ppm (970). Added ph down. Adjusted scrog net. Discoloration in leaves appears to be worsening. Waiting for a new dehumidifier to arrive. With all of the humidity that the fiber pots put off, I’m going to need a dehumidifier in flower. Monday: ran pipes for humidifier, heater and dehumidifier through a different tent outlet. I’m ready to start dehumidifying at flower flip. Removed humidifier since I won’t need it until after the harvest (I dry in my tent ideally). Topped off reservoir water with a heavy emphasis on CalMag. Reservoirs are at a ph of 6.0 and 750ppm. Lowered ppm due to start of burnt leaf tips on one plant. Wednesday. Lowered ph in reservoir from 6.4 to 6.1 with ph down and diluted nutrients. Lowered ppm from 780 to 700. Removed growth below the SCROG net. Adjusted lighting to a DLI of 35 which proved too intense for the plants, so I backed it down to 30 DLI. Thursday: wrapped up the week by giving them a foliar spray after lights went out. Feeding 5ml/g or CalMag and 30ml/g of Seaweed Extract. Topped off reservoirs using 6ml/g of micro, 9ml/g of Bloom, Seaweed and 2ml CalMag.
Likes
5
Share
Die Luftfeuchtigkeit ist jetzt ca. bei 40-45 % 💧 Die ersten Anzeichen der Vorblüte kamen gegen Ende der letzten Woche zum Vorschein. Die Vegetationsphase ist somit beendet, nun beginnt der Stretch und die Blütenbildung.🌱🍁 Deshalb beginne ich ab diese Woche mit dem Blütedünger. Vodoo Juice soll weiter die Wurzeln stärken während sie in die Höhe schiesst. Es bleibt nicht viel Zeit bei Autos.👀🌲
Likes
3
Share
Likes
10
Share
@Growbody
Follow
Herzlich Willkommen zu meinem neuen Grow mit der Frostbanger Auto F3 von 2Fast4Buds. Die "Eltern" sind (GG4 Auto F6 x Bruce Banner Auto F5) x Sour Diesel Auto F5 und das ergibt eine F3 feminisierte dreifache Polyhybrid Autoflower. Klingt schonmal heftig. Der Strain ist beim Autoflowerworldcup 2025 zur stärksten Autoflower gewählt worden. Mit dem Versprechen, süsse, cremige Aromen zu produzieren, muss ich diese Pflanze testen. Die 20 Liter AirPots 7th gen., die Sonnenerde Bio Hanferde, BioBizz Wurmhumus, Sonnenerde Bio Faser, BIONOVA x zamnesia MonsterBud Mix Living Soil, zamnesias SmartStart und Plagrons Seedbooster Plus werden bei diesem Grow wieder verwendet. Tag 43: 1,5 Liter Wasser. Tag 45: 1,5 Liter Wasser. Tag 46: Die Frostbanger Auto F3 von 2Fast4Buds ist in der dritten Blütewoche und hat schon richtig fette Knospen. Sie ist nicht mehr in die Höhe gewachsen. Tag 47: 1,5 Liter Wasser. Schön, dass du dich für meinen Grow interessierst. Freut mich, wenn du wieder reinschaust 👋😎
Likes
8
Share
Our Gush Mintz have undergone a small revolution and are still super beautiful, even more than before. One of the plants was damaged during the main lining I broke a brunch and it was transformed into a very very beautiful LST plant, it could remain small but I wouldn't swear it has a truly spectacular shape. In this diary therefore you will find the plant worked without techniques that require cutting but only with a LST this time also on the main stem and very aggressive to give a beautiful shape. The comparison is the salt of the experience so the plant in the other diary will be worked very differently. We have started the Plagron fertilization program, we are in 100% organic configuration, the soil is recycled Promix + 1/3 fresh soil + 10% Perlite + RQS Mycorrhiza Mix (4 g in the mix, 1 g under the small fiber pot). We are administering // 1 ml/l Power Roots - 1 ml/l Pure Zym - 1 ml/l Sugar Royal - 3 ml/l Alga Grow https://plagron.com/en The doubts about the compatibility between Pure Zym and mycorrhizae have been dispelled, they can get along according to Plagron experts. If someone tells you that enzymes eat mycorrhizae, which in principle may seem possible, explain to them that it is not true. https://www.royalqueenseeds.it/growing/452-easy-roots-mix-di-micorrhize.html Try this strain, it's a top strain of the last few years very high thc level ------------------------------------------------------------------- https://www.zamnesia.io/it/11234-zamnesia-seeds-gush-mintz-automatic.html Brief description of Zamnesia // Gush Mintz Auto is a relaxing hybrid strain that derives from the original Gush Mintz and a high-performance ruderalis specimen. This cross produced a plant with 70% indica and 30% sativa genetics. Her parents have given her a range of interesting traits, including mint and candy flavors and a high THC content of 20%. Smoking these buds provides creative vibes, a sense of euphoria and a pleasant sensation from head to toe. In addition to its enticing flavors and powerful effects, Gush Mintz Auto produces large yields of compact buds in just 9–10 weeks from germination. Gush Mintz Auto is extremely easy to grow, with plants reaching an average height of 70cm indoors and 120cm outdoors, making her ideal for discreet grows or limited spaces both indoors and outdoors. This strain is well suited to LST (Low Stress Training) and performs best in a ScrOG setup (a technique that optimizes light exposure to maximize yields). Punching aromas and deeply relaxing effects As she grows, Gush Mintz Auto's aroma intensifies, releasing sweet and minty notes. This refreshing flavor profile really comes into its own when smoked, offering an inviting combination of minty freshness and sweetness. The effects are deeply relaxing, enveloping the body in a pleasant well-being without being too sedative. Gush Mintz Auto is perfect for those seeking creative inspiration, making writing, painting or music-making sessions smoother and more inspiring. At Zamnesia you can find the whole world of growing and much more. Take a tour around the site and you will find "all the best that nature has to offer" in various shapes and colors. The new strains are amazing and the old ones are no exception... p.s. for now zero Hermaphrodites, growers, can you say the same? --- // www.zamnesia.com
Likes
8
Share
@Chubbs
Follow
Weekly update. Sorry it was a late update this week I was out of town (Bizcon2024). Wow have they grown, I'd say doubling in size. I've upped the watering to 1000ml daily, this week I'll do a major defoliation and lollipoping. All in all Happy Growing
Likes
14
Share
Week 6 – Day 44 (BT20) RedPure#4 is holding steady at 40 cm – vertical growth has stopped, but the buds are visibly swelling 🍇 Her purple fade is getting stronger 💜 and the aroma is becoming more noticeable and pleasant 👃 She’s currently on 50% of the feeding schedule, which results in EC 0.9. ⚠️ With Advanced Nutrients, I let the solution rest for 20 minutes before measuring – otherwise the EC reading is inaccurate. Before resting: EC 1.7 → After resting: EC 0.9 This happens because A+B nutrients bind slowly at low dosages. 💡 I also remeasured the Fluxshield LED, which lights RedPure exclusively. It seems to have lost some intensity over time, so I increased the dimmer by one step to match the original PPFD levels. All in all, she's developing nicely and stays compact – true to her autoflower nature 🌿
Processing
Likes
16
Share
OK so this weeks kicking off big time lots of flowering everything’s really taking off plants are really loving the nutrients super happy with this grow so far I switched bulbs at the beginning of this week to my HPS super excited about the next few weeks I’ll update soon thanks for stopping by!! Quick update its dat 31 32-ish these things are really getting big the LST worked great some of them are kind of thin in the middle but got lots of tops nice bushes the OG Kush just looks killer has a kind of open spread out look I love it it’s going to produce some big buds I can tell! It’s the end of the week I Defoliated again and tied a few more branches down one of the jacks still has a pretty low center but it’s starting to catch up all the plants seem to really be loving the feeling and are starting to really stack up the buds The next few weeks should be fun!
Likes
14
Share
Welcome to Week 1 of the Sweet Seeds Gorilla Girl XL Autoflowering grow courtesy of the fine folks at Sweet Seeds! This is the second of three consecutive grows/diaries that I am doing to showcase the tried and tested genetics from this reputable seed breeder. My last grow was a smashing success so I have high hopes for this grow as well. Nothing much to report for Week #1 although I will mention that the first watering was only 0.7 of a litre per plant (0.18 of a litre per plant per day) and the second was 1.4 litres per plant (0.35 of a litre per plant per day). I am watering on my usual schedule of every fourth day as this seems to be the sweet spot throughout past grows. I am using the usual- air bubbled tap water that is PH’d to around 6.0 and if need be (over the winter months in Canada) warmed to 68-70 degrees prior to hand watering with a small watering can. The seedling that lost one of it’s cotyledon leaves is fine but still a little smaller than her sisters. So now on to Mom’s tip of the week… Mom’s Tip for Week #1 is- YOU GET WHAT YOU PAY FOR- QUALITY IS KEY!… When considering growing Cannabis, even on a small scale, quality is an important factor in all aspects from the seeds to set up to the supplies used throughout the grow. Starting with seeds from a established breeder will raise the odds considerably in your favour for a successful outcome. Many seed companies are more than willing to ship out freebies while building up their brands which seems attractive to new growers- but use at your own risk! There’s nothing worse than being halfway through a grow and discovering male flowers tucked in amongst the lowest branches or realizing that your beautiful buds have been mysteriously pollinated just weeks before harvest. I know that seeds from a reputable seed breeder are usually more expensive and can be hard to access in certain parts of the world. But purchasing quality seeds from a reputable seed company is the first step towards homegrown Cannabis success. An area that new growers often overlook due to the high price is the quality of crucial components in their set up- including tent, lights, and intake/exhaust fans. Anyone can get away with cheaper pots, oscillating corner fans, water pumps for dechlorination, etc but it’s worth every penny investing into the workhorses of your entire operation. An initial investment of around two thousand dollars will provide serious growers with the longevity and hassle free basics needed. If done right, quality components will pay for themselves within the first 6-12 months of use and continue to serve your needs for 3-5 years to come. Supplies used throughout the grow are the final area where quality is important but somewhat subjective too. Although I’ve already stated that I don’t feel the need to spend big dollars on all the extras (pots, oscillating fans, water pumps for dechlorination, PH/moisture meters, etc- I do believe in doing my homework to make sure that I’m getting the best bang for my buck. I thoroughly research every item purchased and used in my grows by reading customer reviews, speaking with other growers and sometimes even trial and error at my own expense. Making quality an important factor in all aspects of Cannabis cultivation will benefit you, your grows and the planet we live on. 🌳🌎🌳
Likes
8
Share
@Bdizzle
Follow
Growing strong and healthy!! Baby buds are coming in all over :) Can’t wait to watch them grow!! She has doubled in size over the past few weeks & has started to slow down to focus on flowering. Stems/stalks are growing strong & thick ready to support some good bud growth :)
Likes
14
Share
Buds are densing up everyday and trichomes are coming along nicely. 3 more weeks to go. I feed her one last time after this there will be no nutrients given to her. Just water only.