Recommended
Likes
Comments
Share
@Rastaluna
Follow
Helloo, planties are roughtly 3 week into vegetative growth. Into second week our cat snucked into the tent and being the motivated gardener she is, dug out quick one and speedy chille, we put them both back into place gave planties some water, and with time they recovered, speedy chille got most stress, but being photoperiod, recovered slowly aswell, still the shortest and very loved. :) so everythings good Royal kush has the strongest smell of them all, few leafs we defoliated we grind in our hard and smell a deep green canna scent. Northen lights is the leader in hight since begining When planties grew 5 tops we topped them, began doing LST and a bit of defoliation, bended stems away from the lamp and taking off leaf that blocks light reaching tops. The stems hardened and remind me now more of a tree
Likes
48
Share
Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Have fun with the update. Hey everyone 😃. Unfortunately it happened again and the pump failed again for the whole day :-(. All the spare parts have finally arrived and I replaced everything right away. I threw away all the cuttings because there were now two complete failures and I want to be on the safe side. Since the mother of the Kosher Tangie Kush is too badly pruned, I have only been able to cut 3 small test cuttings. Should one of them become something I will take it directly. But it can also be that I have to cut some again, which would only be possible in 2-3 weeks because the mother has to grow back first. That shit happened to me the first time :-( but unfortunately it can always happen with electronics :-(. Nevertheless, I wish you a lot of fun with the update. Stay healthy and let it grow 👍 You can buy this Strain at https://www.amsterdamgenetics.com/product/kosher-tangie-kush/ Type: Kosher Tangie Kush ☝️🏼 Genetics: Kosher Kush X Tangie 👍 Vega lamp: 2 x Todogrow LED CXB3590 COB 55 W 1 x Sanlight S2W 62 W 💡 Flower lamp : 2 x Todogrow LED CXB3590 COB 55 W 1 x Sanlight S2W 62 W 💡 ☝️ Grow Aero System : Growtool 0.8 ☝️ Fertilizer: Canna Aqua Vega A + B , Canna Aqua Flores A + B , Rizotonic, Cannazym, CANNA Boost, Pk 13/14, Canna Cal / Mag, Canna Ph - Grow, Canna Ph-Bloom ☝️🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EG. Add Cal / Mag to 0.4 Ec Ph with ph- to 5.2 - 5.8 💦 💧
Likes
77
Share
Am so chuffed with this lady . She's exceeded my expectations
Likes
Comments
Share
@SGCFarms
Follow
Day 17, and she’s starting to show sugars from the top down. I can’t wait for a smell to develop, but when I did smell something during the first opening of the tent it smells something fruity. She’s drinking at least 4 gallons a day at this point.
Likes
13
Share
Good progress this week with the lst....also transplant
Processing
Likes
42
Share
@Dunk_Junk
Follow
She grew 12cm this week. Now 27cm tall. She seems to be very bushy already. It could be a nice sign!
Likes
12
Share
@Bluemels
Follow
Tag 47: Wieder mal entlaubt und ein 2 Netz eingebaut 😀
Processing
Likes
27
Share
@BudXs
Follow
Room is almost there Flood table coating was completed this week. Took forever to cure in the colder weather, but it is looking great now. Normally I wouldnt use this stuff because it is $200 per gallon, but since Im in the industry, these expired sample cans didnt cost me a cent and provides a much more durable, reflective, cleanable and puncture resistant alternative to plastic. Im very happy with the table overall, it cost me very little to build I installed the fan and carbon filter, moves about 750 cf per minute. Its a bit loud, but its huge, so what are ya gonna do? My dutch bucket pails are slowly being collected from my local coffee shop. I need 4 - 8 more. Ive got all the hardware to set up the watering system, so I will work on that in the coming week
Likes
Comments
Share
In the second Week i started to give them a few nutrients. Maybe a bit too much, as you See in the last 2 Videos. Since its very cold (-5°C) in Germany i've put a heating cable losely around the pots to Heat Up the soil a bit.
Likes
44
Share
👉The last waiting game is just about at an end. It has mostly cloudy trichomes, with still a few clears. Some ambers are scattered about and are mostly on the sugar leaves. Super frosty, super intoxicating aroma or sweet citrus. The leaves have faded only slightly. I could harvest it today if I had time. I think it may be a couple more days. I am set up and ready to harvest when it feels right. 👉I have been giving it nutrient mixed at the high end of the EC range for the Ripen mix from the General Hydroponics Drain to waste feed schedule. I have given a couple of H20nly irrigations followed by a full strength solution fertigation. The EC spikes in a couple days and the pH drops. One H2Only event gets the run-off and pH back in the target zone. I will continue fertigations till harvest day. Any day now.😎
Likes
136
Share
~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 1/9/22 😻Week 4 is here and its been smooth sailing!!! They're still getting acclimated to their new homes, a little droopy but nothing major.. we've increased their feeding slightly and started adding trace amounts of calmag (<2mlgal) and we're now just watching them closely for any type of light stress..I really should have up-potted these sooner but spilled milk lol, I'm still on the fence on how we'regoing to train these, but we may just do our standard 4way LST after topping each at node #2 (after 4+ nodes).... we'll update again midweek, thanks as always for dropping by and happy harvests everyone!! ❤️🌱 ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: >50k hrs ⌛ Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 Weight: 10.1 lbs (4.6kg) -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 15 can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_
Likes
3
Share
After getting over the loss of Cookie I push forward . I took care of the overwatering issue by using the AC infinity wick auto water system, So far it's doing great.
Likes
208
Share
@NO_DRAMA
Follow
Grow on earth · Grow with Mars 👏 The plants look very good. We get better every day. Bravo to seed bank NL 💚
Likes
19
Share
Loving the way she is coming along. Gonna try to keep her in veg until banana kush is harvested. Flower tent is 4x2, and having success so far shaping her for it specifically. Photos/video taken 47 days after breaking soil.
Likes
18
Share
@ClubRiot
Follow
Smoothie Auto Week 11 LED: SP250 ( 250W ) by Mars Hydro Canna COCO Mineral Nutrients: 👇 Flawless Finish: 2 ml/L
Likes
4
Share
Finally the Cal Mag Xtra arrived. Couple days after the feeding, the signs of it started fading. Later in the week I placed the net on them. I minimally trimmed the bottom half of the plants. One plant had started flowering already, others where smaller and behind. I also do not have any clue if what I was doing wasn't setting them back. So I held back a bit. Let's see what happens.