I think they are closer to done than I previously thought. All clear on trichomes though. Two more weeks?

Still no flowers, foliar calmag, silicate, proroots. Still problems with Calcium. Matterhorn is unstable genetics!

time lapse of last 4 weeks.

The plantas get a little bit struck, I don't know what's going on, I will start a new phase off fertilizer from advanced nutrients.

From week 2 to 3 in flower the plant took off and almost shot itself into the light overnight. Upped the bloom nutrients to 36, interested to see how the plants handle it. I have maxed the height in the tent, reflector is on the top of the tent and the plants are 20 to 24cm away. Can't do much about the height so managing the heat between the bulb and plants.

Hi growmies, The plants are in full flower now and have been defoliated after the hst of last week and seems like she has recovered. I had removed the filter and vent from the box and have the vent suck the air out of the box into the carbon filter, which gave me another 10 cm to play with. The plant consumes around 2 l of nutrient solution in 24 hours. This whole experience is howling me that I have to change the system in the box as I loose to much height with the grow table and the rockwool blocks. Will probably run a 20 l DWC in it, that I am currently working on.

This is exactly the 🇲🇦 morroccan 🇲🇦 way of sifting resin from kief. Traditionally, apart the hand rubbing method, dry sifting through a mesh is the most used way to obtain resin, from 🇦🇫 Afghanistan 🇦🇫 or 🇳🇵Nepalese 🇳🇵 Mountains to 🇲🇦 Morocc 🇲🇦 Rif passing through Bekaa valley in 🇱🇧Lebanon 🇱🇧. The average size of meshes used vary from 90 to 180 microns and are mostly made by silk and for this reason uneven. I think the most productive ways to sift are Dry Ice and  rotating pollinator + CO2, I've tried a DIY pollinator built by a friend and it can reach up to 20/25% of resin extracted at 120 microns and 15% at 90 microns. But smell and taste don't reach that traditionally extracted but this is another story. Morroccan way is good compromise between a stashbox or more evolute methods. It requires less than 10 dollar of expenses. You need: a basin or pot  without handles a heavy-duty plastic bag that contains the basin a pair of chopsticks a good 120 microns net an elastic band tape Kif or trim q.s. Here is the link where I buy my meshes. Very high quality, customable size and material (steel or nylon) and length and very kind vendor on AliExpress https://a.aliexpress.com/_uwfQzq Drum for 3 minutes. .....perhaps you will find that you have an innate talent as a drummer, throw the shit away and put your head right......

Day 78. that’s all she wrote folks. Mainely really hit t out of the park with this plant. I’m always so impressed with his genetics. She was dongly. Beautiful dense nugs and beautiful colors. Really happy to watch her dry out and see how she smokes. ♥️♥️

Pues han salido las 4 , 100% de efectividad. Hoy voy a cambiar ya a tiestos de 2 gal. A ver qué tal empiezan esta nueva semana después del transplante. Buenos humos a tod@s

Day 34 this lady is running, I can see flowers getting bigger every day, smell started really really soon this time so I already had to add the Carbon Filter. I’d like to close the cycle in less then 80 days. It would be great First flowering fertilisation Ph 6.2 Ppm 631 Day 37 - 9 of flower 🌸 Started blooming fertilisation, I’m keep Giving all-in one from aptus, i think I lm substitute with super pk and I stop all in one. Ph 6.2 Ppm 731 As I’m growing an solito in a 9.2 lt pots with all mix nutrients I’m slowing down with all in one and just giving base feedings, I ll decide later if I should give super-pk for the next weeks Day 40, tomorrow will be feeding days. Sge’s going really well, resin is already showing up on flowers that are several as and colorfull, smell is already there 🤤 Tomorrow update with feedings parameters. Day 41 feeding day Aptus regulator 0,15ml/1 lt Aptus all in one 1,25ml/1lt Aptus Topbooster 0,3 ml Aptus enzym + 0,5 ml Calmag 0,3 ml /L Ph 6,18 Ppm 756 Let’s see

3RA SEMANA DE CRECIMIENTO, 21 dìas, se aplicò poda apical a todas ya que haremos un lst a todas posterior a su recuperaciòn para asi llenar el espacio de 80x80 rapidamente, en 1 semana mas se harà transplante a maceta de 7 Litros definitiva y se hizo una aplicacion ya de base A+B DE mills. CABE DESTACAR QUE UTILIZAMOS MICORRIZAS EN CADA TRASNPLANTE saludos!!!

Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Flowering day 1 since time change to 12/12 h. Hi everyone . Actually I wanted to let it grow for another 1-2 weeks and top it, but slowly it stops with that Growing up so I decided to put it in bloom today. It was poured twice a week with 0.8 l. Next week she will get her first batch of flower fertilizer. Until then, I wish you a lot fun and stay healthy 🙏🏻 You can buy this Strain at : https://www.zamnesia.com/de/5165-zamnesia-seeds-kalini-asia-feminisiert.html Type: Kalini Asia ☝️🏼 Genetics: Black Domina x Purple Kush 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

Was a real pleasure to grow. Super easy with a low budget light and top nutrients. Got really nice plants and was really happy to find that I'd be happy am to do more strains from Divine Seeds. I've already started new strains in big pots giving me big phenos Delighted to have this in my collection. Took 10 days to dry. Only got about 2 weeks into the cure before it was gone. But, still has a lovely high & taste

Day 70 - 2cm taller this week. Flowering stretch all but finished. Flowers are forming fast. The pungent smell is not too strong at this moment.

Week 13 (9-9 to 15-9) 9-9 Temps: 18.9 to 27.9 degrees Humidity: 42% to 79% Watering: 2000 ml. Increased the light intensity from 90% to 95% 10-9 Temps: 18.7 to 24.6 degrees Humidity: 49% to 65% 11-9 Temps: 16.5 to 23 degrees Humidity: 45% to 66% The leaves are still praying so i increased the light intensity from 95% to 100% 12-9 Temps: 17.3 to 23.6 degrees Humidity: 45% to 56% 13-9 Temps: 19 to 23.7 degrees Humidity: 47% to 62% Watering: 2000 ml. 14-9 Temps: 18.6 to 24.4 degrees Humidity: 49% to 64% 15-9 Temps: 19.9 to 26.7 degrees Humidity: 50% to 67%

week intel: we getting close to end of ripening , this week i raised drought , Nitrogen and E.C stress by feeding them 2 times per week and raised e.c to 3 to cause real stress that will help increase terpenes production stresses : Nitrogen deficiency Stress by removing the fertilizers that has N in them Drought stress via removing one meal in week high E.C stress around 1.7 and the other feeding day 3.0 , 2 times a week feeding: no more Nitrogen i feed them 2 times this week with this order : day 1 : i feed them high with Bio-Bizz Top-Max + Feeding Booster about 850 ppm - 1.7 e.c to cause a medium e.c stress. day 3 : no more feeding this day day 5 : i feed them very high dose of Bio-Bizz Top-Max + Feeding Booster around 1500 ppm - 3 e.c to cause high e.c stress guide of the week : be patient in the last weeks, never hurry for harvest because its the time of ripening in last 2 weeks you should let plants to do their work last weeks of ripening is the time to break the limits we should cause 3 stresses as i said above Nitrogen stress , Drought Stress , E.C Stress

Start of Week 12 😉 Day 86 autumn comes too fast 😵😲😪 Day 88 time is running out 😲😯😧 Day 89 the weather turns to epic fail 💀💀💀 Day 90 the sun comes back again 😍👌 oh lord

Now she is hanging at 60 degrees 60 % .

Hello growmies! 25/08 - Alimentação Royal Gorilla # 1 : CE = 1,39; pH = 6,3 O gráfico representa a nutrição da RG#1 misturada com 2,5L de água. 25/08 - Alimentação Royal Gorilla # 2 (2,5L): CE = 1,33; pH = 6,1 -BioGrow - 3ml; BioBloom - 5,5ml; TopMax - 2,5ml; BioHeaven - 6ml; Activera - 5ml; 25/08 - Alimentação Queijo Royal # 1 (2L): CE = 1,36; pH = 6,2 -BioGrow - 3ml; BioBloom - 6ml; TopMax - 2ml; BioHeaven - 6ml; Activera - 6ml; 21/08 - Alimentação Queijo Royal # 2 (2L) - CE = 1,54; pH = 6,3 -BioGrow - 3ml; BioBloom - 5ml; TopMax - 2ml; BioHeaven - 6ml; Activera - 6ml;

starting my second grow. *sorry for the fingermarks on the propagator* I am using the propagator pro 2 from Zamnesia as well as their smart start pots, I used some of the stimulator mix in 5cm lukewarm water. seeds usually sprout in 3-6 days. using half the advised water quantity with the perlite to avoid too high RH problems ( see my other grow week 1) Day 2- one seed cracked open and one is laying the first root. germination in 48 hours :) I am very excited about this one because I learned from my mistakes. my cups are ready. my 3L pot is on the way, no fimm or topping. just lst and defoliation as needed. first dose of bio heaven and root juice as soon as I plant update! Tuesday 21st. I started a second seed of GG auto in case the first one gives up, 5cm of water and a drop of root juice and bio heaven. Day 5 (wed 22) Sticky Beast is In a cup, as soon as the GG is ready I will put it in its 11lL pot. the SB gets a pot in 2 weeks when the pot is free Day 6 (Thu 23) my rescue seed got mold, the first GG seed that had a weird root that broke off (the tip) bounced back 2 days later, another 2 days till I intend to plant her, will seed what the rescue seed does till then