The Grow Awards 2026 🏆
Likes
Comments
Share
Beginning to get into her stride, and rather larger than the 20:1 CBD auto plant growing alongside her.
Likes
15
Share
@MrGrowMan
Follow
Week 12-13 1 nutrient water 1 non nutrient water LsT and Scrog Diesel and Mimosa (front 2) auto day 62 start 12/12 light period 2 break up cake day 67 start flowering
Likes
26
Share
Day 28 flower, things are doing well, humidity and heat are stable, plucking off leafs as I go along now anything blocking bud sites. I'm on week 7 of the biobizz feed schedule full dose, these girls not showing any nute burn or stress so far either I could probably push them more. Day 33 from flip. Heat and humidity are under control. Sitting at 27°c and 40-47% humidity with lights on. And 20°c and 47% humidity lights off. Ph levels on feeds and watering is 6.5, there really loving the biobizz range and the marshydro tsl2000 combo. So today the plants are getting fatter and nice and dense. Its super sticky and stacking on trichomes. These 3 beans came from The same pack, and each one smells diffrent. Closest pheno is a really lemon citrus smell and its strong. Middle pheno is like a sherberty smell and really tickles the 👃. Pheno 3 at the back is like a lemon skunk, really pungent and its got the fattest buds so far too. Day 34 flower, Feeding molasses today in 6.5ph water, I will start the next week tomorrow and will be starting on week 8 of the bio bizz nutes schedule. Thanks for all your support so far. Keep on growing
Likes
8
Share
Purple shine a bien repris son développement, niveau racines il va être temps de la rempoter une bonne masse racinaire commence à sortir du air pot. Le 25/04 seconde taille des branches principales, de 2 apex cela va passer à quatre😉, apport de solution nutritive pour réduire le stress de la taille(terragrow 1,5ml, katanaroot 0,2ml, silicon 1ml, calmag 0,5ml). Maintenant repos pour cette demoiselle avant la prochaine taille😉 Purple shine semble reprendre assez vite sa végétation après une taille. Ses branches sont bien épaisse ajout de silice et a participé.
Likes
8
Share
What does this yellowing indicate? Maybe im overwatering? The soil has been hot for the entire grow but never yellowed on the bud leaves.. Decided to take off the budz hanging off the edges of the pot for samples 40g wet, 22g dried and now curing. smoke report coming soon.
Likes
11
Share
@madlangs
Follow
Dehumidifier in lung room been going all week to help with temps All going extremely well. Not one leaf has any burn or deficiencies. Purple punch at the back looking a bit light green could just be the pheno. Flower sooner next time. They are taking over the room. Finally stopped stretching now. Mont Blanc 61cm Blue sherbet 97 +86 Purple punch 99+ 102 kush mints 110cm Lights 465w 26cm Dli 800ish 300w 21-32cm Ppfd 750-950 Dli 32.4-41 Pineapple chunk outside All going well with it. Putting it in the shed at 8.30pm and taking it back out 8.30am Giving plain water every day in the tray 31.3.23 1L 10ml pk 5-8. Ec4.5 5ml bio heaven Ec4.7 3ml Acti Vera Ec 4.7 3ml Alg a mic Ec4.9 Ph 5.9 Added another 0.5L water Ec 3.5 Ph5.9. Brought up to 6.3 8ish drops Gave 1L bottom and half litre top watered
Likes
15
Share
@Uwish
Follow
Hello guys, Here I am again to present you a new run, still with the best leds of the market nevertheless as I changed my growing space from 120x120 to 150x150. So I had to update the material inside... I will run with 3 EVO 5-150 lamps of 320W or 960W with Bluetooth dimmers. For the Hydro system, it will be the V-SYSTEM from Alienhydroponics. In fertilizers I am always with Advanced Nutrients. I work with osmosis water. Currently, 4 clones took on 4. Once the roots are ready, I will transfer the cuttings from the propagator to the V-SYSTEM. ------------------------ since the 16/08, when I transplanted the plants in the RDWC system, I noticed some points that I will mention below and correct next time. 1. The cuttings are too small, allow enough time so that I can completely fill my pots with clay balls. 2. Cut out the bottom of the pots from the cuttings. 3. 3/4 of the cuttings are touching the water, so one is late. Next time when transplanting, add more water, up to the basket in order to immerse all the plants and not to create a difference between each one, consequence now I have 3 that are ready to explode and one that will struggle behind, problem corrected today by increasing the volume of water. 4. The b-52 is a real pain in the ass in RDWC, you have to clean the 2 filters almost every day, with this new soup I'm testing without and I think I'll continue like this just with the base sensi grow A and B, as I use Root rot X, I won't use voodoo juice since all the bacteria would be killed. 5. Use of Voodoo Juice is useless if using Root Rot X which will kill the bacteria. I don't know why but when I transplanted in the RDWC, I put my set up in growth mode, except that the plants were not ready for it, moreover, I made a FIM on each. So I lost some days, these last days I went back to a ppdf of 150, now that my roots touch the water, I declare growth 0 on 22/08, I will do between 21 and 28 days of growth. And as my roots are doing well and touching the water I'll go to a PPFD of 300 ++
Likes
156
Share
@StarLorr
Follow
Helloing 👋🏻friends and visitors. Welclone to my Clone diary🙃 Both clones are pumping some serious resins into the buds 😋 Feeding: Wed 6Dec: 3L each with nuts pH'd 6.3 Sun10Dec: 2L each water only pH'd 6.5 ______________________________ All is going smoothly and we should have a happy harvest in 3 weeks😁 Thanks for stopping by, likes and comments are welcome 👊🏻😎 Keep on growin! Keep on tokin!!! 😙💨💨💨💨💨
Likes
Comments
Share
Leider hatte ich nicht geplant daraus eine Story zu machen. Aus diesen Grund habe ich leider nicht viele Bilder von diesem Grow Unfortunately, I hadn't planned to make a story out of it. For this reason, I unfortunately don't have many pictures of this grow.
Processing
Likes
126
Share
@Th3L0rAx
Follow
So.. the flush begins for DD#1 and #2 checking trich’s and these to ladies are showing about 70% clear to 30% cloudy may finish in week nine. DD#3 still in bloom throwing tons of white hairs and purple flowers 100% clear trichs so she’s gonna get another feeding. DD# 4 is the showcase cause not only did she start out slow but she’s the only 1 of the 4 that’s started purple flowers and and is also purple leafed. I’ll continue to post some picture tonight wanted to get this up as I am flushing and pulling them out of the tent to do so. Also continue to add photo every 2 days. Updated 4/30 day 58 posted video and some new photos Day 60 really started to look at trich’s since plants are definitely getting close. DD#1 looks to be my heaviest producer trich’s are 60/40 no amber yet DD#2 80/20 no amber DD#3 90/10 no amber but it must be a mutation or something in the genetics cause it’s no longer thickening up its foxtailing all over so she still got time and we’ll see DD#4 is looking good and has a few weeks before I’ll start checking trich’s on her, pistols popping white all over the place.
Likes
27
Share
1/20/2023- So much to do pre grow and over the next 16 days, absolute first order of business is that I have to take down my current Grow---TIMBER-- Then I have a list of things I have to get done in order to be ready to start this grow 1 Feb. With that said T - 2 days until start 48 hour Flush T - 2 days until Start 48 hours of Light T - 4 days until TIMBER!!! Items that need to be done before 1 Feb 2023 1. I need to clean the tent out 2. I need to clean the equipment- Proper Sanitization between grows in Hydro is a must!!! 3. I need to get the hole in the ceiling above my tent repaired- For my last grow I had a deep sink installed in my grow room, to make Hydroponics a little bit easier and have a water source in the same room. The seals on the pipes they were installing broke and leaked through the ceiling causing some damage all the way across my grow room, I was already weeks into my grow and couldn't risk them working above my tent and it would have been very awkward positon for them to be working in as well, so have to get this done quickly between chop and germination. 4. I have to install my new light- I was using a Vivosun 4000 and for this grow I am switching up to a Spider-farmer SF 7000. 1/20/23- For this upcoming grow I am working with M/F photo seeds so I ordered 4 Sex determination kits. I recieved my my 4 Sex determination testing kits from Rimrock Analytics today. I will be using these to test my plants at week 2 of Veg so that when/if I take clones I know I am taking them off females. As well as I don't want to accidently pollinate my tent during this grow I am looking for big beautiful buds not seeded buds. :-) 1/24/2023- Harvest of current grow- Started at 2:00pm and finshed wet trim and firt batch into the freeze dryer. 1/25/2023- Next batch into the freeze dryer and cleaning all my equipment for this Grow. T-1 Day until the workers are supposed to be here to fix the hole in the Grow Room. T-3 days until I instll my new Gorilla Grow Tent and my New Light Spider Farmer SE-7000 for this grow. T-7 Days until Start of Germination 1/26/2023- Harvest is done ran through the Freeze dryer and dry tim completed. 1/27/2023- Grow Room repairs completed. Hole is gone Letting the paint dry before I install the new tent. T-2 days until Install the New Gorilla Grow tent and the new Light T-3 days until I put the hydro equipment in the new tent T-5 days until Germination 1/29/2023- Day 0- Final Pre Germination activities Germination Start T-3 days The paint on the ceiling was dry and it was time to finish prepping for Germination. I got the following items knocked off my list. New 4X4 Gorilla Grow Tent is up and ready New Spider Farmer SE-7000 Light is installed- Thanks Moony Grows for the suggestion and for the Code that got me some money off and free shipping (Moonygrows)!! I turned the lights all the way up to max and set the timer to 18/6 0600-0000. I will keep an eye on the temperature and humidity without my plants and see how hot it gets with the new light. I put my Hydro system back together and put in 40 gallons of water into it, time to monitor for leaks the next few days. I Setup my cloning machine for Germination Days 3-11 1/30/2023 let me break down the situation, ROOM in the TENT.. Enough said.. No really I tried putting my exhaust system up in the new tent with my new light, The light is so big corner to corner that it really didn't give me enough room for the lights be be raised, with the exahust hanging the buckets my plants are Starting in are 2 and 1/2 feet off the ground, great for plenty of room for roots but not so great for upwards space for the plant to grow. In a 6' 11 tent with the exauhst in side and hanging that only gave me a little over 4 feet of grow room to play with. My last grow if you saw my diary, anyone could tell I was struggling to keep the buds off the lights. No good, Since space was such an issue I was running my carbon filter inside on the ground but It really needed to be up sucking the heat out not shooting the cool out. With that setup I was sucking air through the filter and pushing it out the tent at a bottom exhaust hole cold out. Wasn't doing me any good for my heat. I was hitting temps of up to 85 degrees. I bought a portable AC unit and have been running it in the grow room to try and keep temps below 85 and I have had to lower the power on my lights during grow also not ideal.. With that said a friend of mine MoonyGrows (Check out his diary) took the time to look at my issue send me a picture of my grow tent setup with detailed instructions on how to suck the air out from the top but putting my filter and fan on top of my tent so no room issue and I am sucking the air out from the top where the heat is instead of pushing the air out from the bottom where the cool is... THANK YOU MoonyGrows For taking the time to help me get this straightened out.. Now I have room and I have the exhausts working right and now my temps with everything at 100% are topping out at 80 this dropped the temp by 5 + degrees at 100% max. T-2 days until Start of Germination Prepped my seed tray with humidity dome Prepped my Rapid Rooter plugs. I Used RO water, and I added a few drops of Hydrogen peroxide to Oxygenate the water. I then PH balanced between 5.7-6.0 the same that they will be getting in the Cloning Machine and when they get to thier final grow pod. I perfere the 5.8x range and I hit 5.84 for these rapid rooters. If you want to see a complete video on the process HowWeedGrow has an amzing video that shows step by step how to do it and explains it better than I ever could including how to plant the seeds. Which I will cover when I get to that step on Wed. https://www.howweedgrow.com/how-germinate-weed-seeds-cannabis-rapid-rooters/ 1/31/2023 T-1 day until Germination Start All set and ready have my Rapid Rooter plugs ready to go have my seeds out.. Have my seed tray warming up tonight. Tomorrow morning right into the Rapid Rooter then strait into the tray. I will spray the dome to start the humidity in there. 2/1/2023 Germination Day!! Let the games begin! 0600am Put the seeds into the Root Riots. And then put the seeded Root Riots into their first home the Seed tray. I have them under the light 24/7. Sprayed the dome 7:30pm Sprayed the Dome to keep humidity going on the dome. 2/2/2023 Day 1 of Germination Sprayed the Dome in the morning Sprayed the Dome in the evening 2/3/2023 Day 2 of Germination Roots are starting to come out the bottom of the root riot plugs and the heads are slowly popping out of Number 4 just below the surface. Afternoon- Number 4 has popped up Evening- Number 3 has popped up as well. Happy Dance!! 2/4/2023 Day 3 - Germination Surprise Surprise Surprise- all 4 have now poked their heads up.. Happy day!! 100% Germination succeeded. Now major milestone to track is how many are female and how many are male. I will take look at the roots this afternoon/evening and see if they have enough root to go into the cloning machine for the next 7 days before they go into their Hydro Pods. Day 3 - Germination - Evening.. Roots looked good and they were tall enough to make it into the cloning machine. Now that they are all in the cloning machine I have switched the lighting to veg state 18 on 6 off. 2/5/2023 Day 4 - Germination - Morning All the Ladies (fingers crossed) looking great stretching nicely and look nice and green, Photo synthesis underway.... UPDATE!! After a very interesting POD cast on FSTS by Dr. Bruce Bugsbee from Utah University, I have shifted my lighting to 24 hours on through seedling and then I am going to shift to 20 hours on the rest of Veg. 2/6/2023 Day 5 - Germination While Checking on my conditions inside the new tent last night, I found that the Humidity was down to 39 Percent. I added an AquaOasis Cool Mist Humidifier, the reason I selected this humidifier is that I needed one that could be turned on and off utilizing my Inkbird Humidity Controller IHC200 that I have my Pro Breeze Dehumidifier currently running with. Root structures are starting to get there about 1/4 of an inch. 2/7/2023 Day 6 - Germination Everything seems on track more roots poking out of each today. They are each getting a little taller as well. Checked in the evening and number 3 was drooping the Root riot plug on the bottome was dry and the roots were not in the water yet. I raised the water just enough that the longest root that was sticking out is now hitting the water. 2/8/2023 Day 7 - Germination Everything looked good while checking in on them this morning number 3 is now full up and no droop again. 2/9/2023 Day 8 - Germination T-2 days until Plant into Forever Pods and we start week 1 of Veg .. :-) Surprising thing to me is that number 1 and 2 were later in popping then 3 and 4 but the roots are growing longer in 1 and 2. 2/10/2023 Day 9 - Germination Number 1 and Number 2 are definitely ready for transplant today.. Based on how they were yesterday and where they are today I am hoping by tomorrow 3 and 4 are ready. Today they look to me where 1 and 2 did yesterday.. I really hope 3 and 4 catch up by tomorrow since.. T-1 day until transplant to new/ final home for grow. Need the roots long enough to have some clay down in the basket to keep the root riot out of the water and only roots in the water.. 2/11/2023 Day 10 - Germination Today they got placed in thier forever Home, 7 days from Sprout and 7 days until Week 1 Start. PPM- 180 this is water out of the Tap Temp Water: 70.7 Temp Tent: 77 Humidity: 40% I have a humidifier going 24/7 to try and bring this up.. I also have Humidity Domes on each plant. 2/12/2023 Day 11 - Germination Sprayed the domes, all are looking good.. Nothing much to do at this phase but Keep monitoring the PH level in the system and making sure they have a comfortable home. T-6 days until Week 1 start 2/13/2023 Day 12 - Germination Sprayed the domes, They were looking a little yellow today so I moved the light down to assist. Nothing much to do at this phase but Keep monitoring the PH level in the system and making sure they have a comfortable home. T-5 days until Week 1 start 2/14/2023 Day 13 - Germination Sprayed the domes, They were looking a little Florissant yellow today, with what looks like slight burn on the tips, I talked with a fellow grower and we agreed that It was probably that I was drowning them, Yes you can drown you plants even in Hydro, but only early on.. :-) It usually happens with the water being too high, which soaks not only the roots but the medium (root Riot plug in this case). I lowered the water from touching the bottom of the pot to about 1" away. This will probably take 3-4 days to resolve. I will continue my daily monitoring. T-4 days until Week 1 start 2/15/2023 Day 14 - Germination Sprayed the domes, continue my daily monitoring they look a little darker green instead of lime green now that I lowered the water levels in the system, so I think that I might have resolved the issue but it will take a few days for recovery to happen. T-3 days until Week 1 start 2/16/2023 Day 15 - Germination I looked in on them this morning, 3 and 4 look like they are doing well and recovering nicely. Number 1 not so much it has brown spots on the leaves, this very well can still be a side effect of the overwatering but I decide to go ahead and add Nutes earlier than I was planning just incase. I was going to wait until Saturday but I think intervention is necessary now especially after drowning them early on. I added 1/2 what I am planning on adding for week 1 start. I also think I am going to adjust my chart to add 1/2 2 days after plant from now on. I don't think it would hurt it to have some Nutes to pull from. .25ml/Gal Calmag = 12.5ml 1ml/gal GH FloraMicro= 50ml 1ml/gal GH FloraGro = 50ml 1ml/gal GH FloraBloom = 50ml T-2 days until Week 1 start = I will drain the system and start it over on Saturday with Week 1 Nutes. 2/17/2023 Day 16- Germination I didn't even want to post today after looking in on them this morning, 3 of the 4 are now showing signs of dronwing.. Brown spots on the leaves, the water levels were still too high.. I drained about another inch out of the tanks.. Will see how quick they recover.. I start week 1 tomorrow and will have to ensure my water levels are at least 1" away from the basket on this round.
Likes
39
Share
OMG. È cresciuta ancora.. Pazzesca. Per fortuna ho spazio nel box. Non potevo andare prima quindi non ho potuto più eseguire LST. No problem. Somministrato cal mag per qualche foglia che comincia a mostrare qualche sintomo, niente di evidente per ora. Mostruosa.
Likes
72
Share
@BodyByVio
Follow
This will be the last week i will Feed. I m keeping TDS at 400PPM and PH at 5.8. This week I took out the Silica Blast, Great White and also stoped the CO2. Also I lowered the water temp to 66 degrees. Lights on temp is between 75 and 80 degrees, lights off between 65 and 72. I’m trying to keep humidity as low as possible around 45% week 10 will be flush week.
Likes
19
Share
Likes
Comments
Share
Hey y'all - this is the exciting one for me, this year - I'm submitting the buds from these plants to the 4Plants Cannabis Cup in November, wish me luck! I'm in the amateur medical category, growing one of my favourite strains, it's exciting! Hope you enjoy the video, I'm just a doofy guy growing some dope, hoping it's, um, dope! Thanks for looking, let me know if you have any questions or comments 🙏
Likes
1
Share
7/28 some light lead pulling removing bottom area and sites that I fill be waste of time taking energy from the tops still RO water and tea every other week
Likes
41
Share
Early week 6 update (i'll add more pictures and comments as needed): Unfortunately I hit some challenges! Light got way too close and stunted growth for a day. I noticed it on tips closest to the light only. Raised lamp to 22 inches. Indica bagseed (plant in the center front) got too stacked: stuff like leaves on top of each other with lots of moisture, no light/airflow penetration, etc. I did some basic LST, leaf tucking, net tucking, to open her up and go sideways more a bit at first. It helped a bit. Unfortunately aug 27, had to get more aggressive on this beast and remove 3 shade leaves on the right side. not happy about defoliating, but had to do it. Will see how she takes it and then look at left side on a later day. Growing the first time is educational and actually therapeutic in today's world for me. I've already learned so many lessons for the net time: don't need such a yuge pot, lamp brightness/distance, air circulation!!! Thank you to everyone that responds with positive encouragement/messaging, it really helps. Adding two more fans to help air circulation aug 28. hopefully it reduces the need to desecrate the plants! Meanwhile the plants in back (purple canyon) want to stretch their faces off, esp. the one in back left, so it is a balance. I only have so much vertical height :) aug 29, flipped to 12/12. plants are happy and i want to control the space for first grow. let's see how it goes. updated the humidity for the week to ~ 60. Ida etc has made it miserable, it should get better soon.
Likes
23
Share
Likes
Comments
Share
@mattoz
Follow
Equip: Spider FarmerSF 2000 Hesi Nutrients Bio Bizz Light Mix
Likes
23
Share
She’s getting frosty and dank 👃🍪🍊🍓🍰🍌🍒🍇🍭👃 Day 29 almost half way , happy with all the phenos so far all frosty so many terps .. started feed the canna nutrients plants canna pk1314 .. 2 flush’s Got the remo plants all most on the proper Ec again