Gorilla Girl XL Auto - A 6th Generation autoflowering strain. A tall, “Super Strong” marijuana strain produced by crossing two of most powerful varieties in the Cookies family: Gorilla Girl®️ x Sweet Gelato Auto®️ (SWS74 x SWS76). 10.7 - 10.13 ----------------------------------- 10.6 - 2 CM+, 2 M, 4 B, .25 Flp, .25 EW 1 & 2 10.9 - 2 M, 4 B, .25 Flp, .25 EW, .5 Molasses 1 & 2 10.12 - 2 M, 4 B, .25 Flp, 1 FS, .5 Molasses #1 10.13 - 2 M, 4 B, .25 Flp, 1 FS #2 ----------------------------------- 3 Gallon Fabric Pot 67% Cana-Coco 33% Perlite - Sta-Green Green Clips ------------------------- Tent: 2’x4’x5’ GA Tent 600D 1 Gal Humidifier 1x 6” Clip Fan 1x 28” Oscillating Fan 1x 4” Carbon Filter with 2x 200 CFM ------------------------------------------- 3 Gallon Tall Fabric Pots Spider Farmer SF1000 LED - Spider-Farmer Optic 1 54W 3500k - opticledgrowlights Optic 1 XL 100W 3500k – opticledgrowlights Optic 1 XL 100W 3500k (Dimming) – opticledgrowlights Cana COCO - Coco Brick Perlite - Sta-Green Filtered Water – Everest Machine Botanicare Cal-MAG Plus General Hydroponic – Flora Series General Hydroponic – pH Up, pH Down Blue Planet Nutrients - Root Magic Mycorrhizae+ Real Growers – Recharge Fish Head Farms – Fish Shit Brer Rabbit – Blackstrap Molasses Zelda – Terpenez Essential Oil Intensifier -------------------------------------------- Variety: SWS82 Indica: 42,1% Sativa: 57,5% Ruderalis: 0,4% THC: 18-25% CBD: 0,1% Indoor Yield: 450-550 g/m² Outdoor Yield: 50-160 g/plant Indoor/Outdoor Harvest: 9 weeks from germination Height: 60-120 cm Effects: Stimulating, Psychoactive Taste: Cypress, Fruity, Citrus, Earthy, Woody, Sweet

Very sweet fruity cake aroma from this plant! Started flushing, hopefully will chop in the next week or so!

6/22 looking good after I tried to spread her out more. She responded well 6/26 sexy ass plant

This week was kind of all over the place. 2 plants have done well despite my efforts.... haha!! One was struggling because I let it go dry on accident. Then when it continued to lag I decided to give all 3 a little Big Bloom. I had about 1.5ml of Big Bloom in 2 cups of water. I only used 1 cup feed total between the 3 plants. I then just watered the last few days and moved them into the 5 gallon pots today. I tore holes through the bottom of the manure pots and "lightly crushed" the corners a little bit. I watered them with 2 cups of water. They are planted in Fox Farm Ocean Forest soil. I had started them with Happy Frog in the manure pots. I hope they start growing big! I figured out the temp/humidity issue. I'm dialing it back in now with the 3 large pots in the tent. I need to reset the height of my second camera and I will start doing some more time lapse videos! As always, advice is welcome.

In the end I got an small amount as 30 grams, not what I expected from this strain but due to the problem I had its OK.

Oct 30 - Milky and clear Trichomes on mature plant, I suspect she's very close to harvest. The other plant is a little behind, with mainly Clear and Cloudy Trichomes. Continued to defoliate dead leaves as they're found. Senescence is starting to resume with colder temps. Oct 30 - Watered Mature plant at 7.30PM. Checked Trichomes, they seem pretty close. However some calyx' aren't pumping in volume + Stigma/Pistil colour whilst others are full with brown / orange coverage 50%. Oct 31 - Defoliated and Watered younger plant at 9PM. Nov 1 - Watered mature plant at Noon, purple starting to present on more colas. Nov 2 - Watered younger plant at 10AM. Trichomes on younger plant are mainly clear with one or two amber on calyx. Nov 3 - 8AM Watered mature plant, checked trichomes - more amber appearing in calyx - although clear trichomes still very present. Day 83, I suspect Day 90 will be chop day. I'll put both plants in 50 hours darkness on Day 87. She's Oily, when defoliating, My knuckles were slimy. Nov 4 - Amber Trichomes definitely present on calyx' Lower budsites are slightly behind, I might be chopping earlier - In fact, I'll put them in 48 hours of darkness starting tonight. If the younger plant is not ready, which I suspect the case - I'll resume regular lighting for another week or two. Nov 5 - After getting feedback, I'm surprised to see I have another 2 weeks. The purple plant is definitely putting on size. I suspect the weight of buds will be too much to stand freely.

Bestva Quantum Board LM301B / Mr Hide seeds Semana de agua reposada únicamente. Están casi totalmente amarillas, lo que indica que se han lavado bien. Flores compactas, sanas, olorosas y pegajosas. Semana de cosecha 🤙🔥

Strain: Barney’s Farm – Mimosa x Orange Punch Grow Type: Indoor Pot Size: 5 Gallon Medium: Peat Moss & Perlite Nutrient Line: Athena Week 20 Update Sorry for missing the last two weeks of updates things were very hectic on my end. Glad to be back for Week 20, and I’m also looking forward to the harvest entry soon. This week she was flushed with plain water and then chopped. She’s now hanging to dry, and the buds are looking frosty and full. Feeding Flush with plain water before harvest. Indoor Climate Conditions Day Temperature: 25–27°C Night Temperature: 21–23°C Humidity: 50–55% Drying Climate Conditions Temperature: 20–22°C Humidity: 55–60% See y’all next week!

Ztrawberriez auto is growing good. Just a littkec1 gal perlite grow. I am curious to see how well she will do. 🤞🏻 for good things. Thank you Fast Buds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g If anyone needs to purchase fastbuds here is a link for my affiliate program https://myfastbuds.com/?a_aid=60910eaff2419

Buds starting to form!!!! Day 2 of week 8 4/3/25 UPDATE: Flushed with Fox farm sledgehammer ph’d at 6.8 Soils were low at 5.8 4/5/25 update: fed with nutes 4/7/25: watered with plain water ph’d at 6.5 4/8/25: did a slight heavy defoliation to get ready for week 9!

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

I cut the plants, remove the remaining fan leafs and hang the plants upside down inside the dark tent for 8 days. After 8 days I trimmed the buds and put them into glass containers with boveda packs. I burped the containers everyday for 10 minutes (first two weeks twice) for about 4-6 weeks.

This week has gone fine nothing much to report really flower sites are stacking up nice. Trichomes are making an appearance and some nice grapefruit peel smell only subtle but it’s starting to develop. 👍🏼

Finally got a bigger tent. They are much happier. Almost seems like it put them fully into flowering. I'm feeding around 1200 ec but the runoff keeps climbing to almost double. I will flush to about 800. Within a few days it's back up to 2000 Ec. Am I missing something here??

happy Halloween 🎃 🎃🎃zusammen !! Die Pflanze macht sich gut aber ist nicht mehr viel in der hohe gewachsen und fängt schon an zu blühen sieht ganz lustig aus die topf combo !! die Pflanze ist vielleicht 25 cm groß also ein Zwerg

Both were fed on day 43 3.5 liters of full strength nutes. Both ladies are growing nicely, every time I open the tent I’m blessed with that fruity dank smell. Their flowers are bulking up little by little and both are throwing out trichomes in there main colas. Can’t wait for harvest!!! Day 47- both are looking good, maybe a little heavy on the nitrogen so I’m going to dial back a bit on the nutes. Forum stomper is really taking her time, I hope she fills out!

***Sponsored Grow*** = Medic || https://medicgrow.com || Grow = ***Sponsored Grow*** Ok, so first week of introducing the trip tonic line of feed into the medium and getting rid of the lotus crap, all of the newer growth is looking much better and some of the older growth is greening up but I don't expect a full fix for that. Gave some extra grow B in this week as it is higher in P and K and will act as a small PK boost for the stretch that is to come. Flipped my plants to flower as well so they are now on a 12/12 setting. Been using the medic grows mini sun 2's internal timer in the lights and they appear to be working just fine. They have pre-programmed setting of 12/16/18/20/22 "on" cycles, I thought it might have been hold the dial till the number you want came up but its not that fancy. As of now my photoperiod is from 1:30pm-1:30am but I might move this up to 12pm-12am so when I need to look at my plants I'm not waiting till the afternoon. Its really only an issue on the days I'm working. over all happy with the progress, Plants are drinking lots so I'm happy with that. Lights still running at 80% with V1 spectrum, will increase to 100% after stretch, don't need to growing into them and burning up. Till next week. ***Sponsored Grow*** Official Website: https://medicgrow.com/ + https://www.kannabia.com/en Facebook: https://www.facebook.com/medicgrowled + https://www.facebook.com/kannabiaseed/ Twitter: https://twitter.com/medicgrow + https://twitter.com/kannabiaseeds Instagram: https://www.instagram.com/medicgrow420/ + https://www.instagram.com/kannabiaseedsint YouTube: https://www.youtube.com/channel/UCNmiY4F9z94u-8eGj7R1CSQ + https://www.youtube.com/c/KannabiaSeedCompany Growdiaries: https://growdiaries.com/grower/medicgrowled https://growdiaries.com/grow-lights/medic-grow + https://growdiaries.com/grower/kannabia https://growdiaries.com/seedbank/kannabia