Likes
22
Share
@Aeromax
Follow
Hey 👻 After many months without updates, here's a little one. These are the originals mother plants, i took 100's of clones out of em and then flipped to bloom 2 months ago. Here's a few pics of different bloom stages 👆 I began flush today after aprox. 60 days of bloom, i'm looking fwd to cut in 7-10 days, depending on trichomes 👍 I'm not expecting a big harvest but at least a quality one ! I kept a few phenos of Peach Tree, Pink Gasoline and L.A. Kush Cake 🙌 I'll post a final update when i'll harvest 😉
Likes
41
Share
This strain is currently satisfying us greatly, in fact the mainlined one is the best for now without a doubt, its name is King Louis Automatic. Remember that we are growing a plant worked with the indicated techniques and another left to grow without pruning to preserve its speed; in the previous/next diary you will find the other plant of the same variety. This plant has started flowering after a Main Lining that was a success in a Masterful way thanks to a good grower and a fantastic plant with a wide internodal distance: topping at the second internode, creation of the Mainfold, the brunches have stretched naturally and parallel to the ground with just a little pressure, no sign of breakage, fraying of the hemp, nothing. Everything very graceful, aligned and in rhythm. Truly everything is in its place, fingers crossed we will be able to see a mega result. Comparison is the salt of experience, so the plant in the other diary will be treated very differently, go and see it to make a comparison. We started the Plagron fertilization program, we are in 100% organic configuration, the soil is composed of recycled Promix + 1/3 fresh soil + 10% Perlite + RQS Mycorrhizae Mix (4 g in the mix, 1 g under the small fiber pot). In the middle of the week the pre-flowering began so I decided to start the program for this phase: 1 ml/l of Power Roots - 1 ml/l of Pure Zym - 1 ml/l of Sugar Royal - 1 ml/l of Power Buds - 2 ml/l of Alga Bloom Remember the Green Sensation from the 3rd/4th week of flowering depending on the flowering speed or how you see the calyxes composing, when the calyx is in the swelling phase it is used. We sprayed 5ml/l of Vita Race foliar fertilizer once a week. ------------------------------------------------- https://plagron.com/it We always have the excellent RQS mycorrhizae running through the soil. https://www.zamnesia.io/it/5778-mix-micorrhiza-easy-roots.html Love this strain perfect for main lining! ---- https://www.zamnesia.io/it/11238-zamnesia-seeds-king-louis-automatic.html Brief description of Zamnesia // Say hello to true royalty with King Louis Auto, an autoflowering version of the original King Louis. Bred from OG Kush, LA Confidential and a premium ruderalis cutting, King Louis Auto delivers premium bud fit for a king just a few weeks after germination. As if that wasn't enough, her small size and vigor make her great for almost any grow environment. Incredibly efficient King Louis Auto has inherited the best traits of her photoperiod cousin, all wrapped up in a fast and easy-to-grow seed. With good soil and adequate watering, King Louis Auto seeds will quickly grow into robust and vigorous plants. Once fully mature, these plants will not exceed 80cm indoors, meaning they can easily fit into even the smallest of grow spaces. Likewise, outdoor plants will only reach 100cm, making this strain ideal for guerrilla grows or other environments where discretion is key. And if that wasn't enough, King Louis Auto only takes 9–10 weeks from germination to harvest, after which she'll reward you with yields of up to 300g/m² indoors and 150g/plant outdoors. With its pungent terpenes and high THC levels, King Louis Auto offers a fragrant and relaxing experience. When you open your jars of buds, you'll immediately notice intense scents of pine, damp earth and fragrant wood. After inhaling her equally complex smoke or vapor, you'll be hit with a deep, relaxing body stone that's perfect for those moments of well-earned rest and relaxation. With 24% THC, King Louis Auto hits hard and takes ef The whole world of growing and much more is on Zamnesia: just take a look at the site and you will find "all the best that nature has to offer" in various shapes and colors. --------------- www.zamnesia.com
Likes
3
Share
@PoshGrow
Follow
Welcome to GhostGrow Chapter One by PoshGrow! 🌳 Week #7 4th week of flowering. Somehow didnt documented alot of this week and last one in vids or pics... Need to smoke less i guess 🤦‍♂️😆 Scrog works perfect, plants are looking amazing and healthy, tought, fast growing. If you wonder about my home made scrog net, its made from 18mm hot water pvc tube, some screws and rope 😅 Watering when needed, every other watering I used Fox Farm Big Bloom, Grow Big & Tiger Bloom
Likes
3
Share
Likes
2
Share
Alles lief gut mit der Shaman bis zum jetzigen Zeitpunkt in der Blüte. Leider beginnt sich an einigen kleinen Stellen etwas Schimmel auszubilden, gar nicht in den Blüten, sondern an den Trieben. Das war mein eigener Fehler, da ich beim Entblättern einige Blätter letzte Woche nicht nach oben ziehend abgezwickt habe, sondern nach unten zur Erde hin gerichtet abgerissen habe. Dadurch habe ich an einigen Stellen das Gewebe am Trieb verletzt, wodurch sich dort Schimmel bilden kann und tut. Ich hoffe es wird sich in Grenzen halten. Es ist jedoch möglich, dass ich durch diesen Fehler zumindest einen der Haupttriebe verlieren kann. Wieder was gelernt. Gibt es irgendwelche Mittel, den Schimmel an den Trieben zu entfernen?Ansonsten bildet sie weiter ihre Buds aus, riecht schon sehr angenehm und entwickelt sich weiter. Es gab ein paar starke Winde und Böen in dieser Woche, dehalb wurde die Shaman vorsichtshalber gegen die Windrichtung angebunden, damit der Topf nicht kippt. Vielen Dank für euren Besuch und passt bei der Entlaubung auf...😫--- Everything was going well with the Shaman until now during flowering. Unfortunately, some mold is starting to form in a few small areas, not on the flowers themselves, but on the shoots. This was my own fault, as I didn't pull some leaves upwards when defoliating last week, but tore them off downwards towards the ground. This damaged the tissue on the shoot in some places, allowing mold to form and grow there. I hope it will be limited. However, it is possible that I may lose at least one of the main shoots as a result of this mistake. Another lesson learned. Is there any way to remove the mold from the shoots? Otherwise, it continues to form buds, smells very pleasant, and continues to develop. There were a few strong winds and gusts this week, so as a precaution, the Shaman was tied against the wind direction to prevent the pot from tipping over. Thank you very much for visiting, and be careful when defoliating...😫
Likes
8
Share
Hello everyone. so the growth causes me some concerns from what I believe I have identified as a deficiency in calmag but I have trouble getting out of it despite a second spray with 1ml of calmag/li at ph 6.5. yesterday I watered adding 0.8 calmag/litre (biobizz) I'm waiting 2/3 days to really panic. on the other hand, the stems are really big and suggest a robust plant and the well erected leaves reassure me about the overall health. I take all your advice with great pleasure. thank you all.
Likes
Comments
Share
@Arthur99
Follow
Début de la culture ,après quelques semaines pas
Likes
4
Share
Week7 of flower and she is stacking nice and getting thick. Buds are rock hard and coated in resin. Greasy feel that is stickier than anything I’ve ever grown. At least two more weeks maybe more as all her heads are crystal clear.
Likes
6
Share
@Hanibert
Follow
Pb#3 let leaves hang a little bit but looks a bit better now. Some of the Poppin Bottlez allready reaking of oranges.
Likes
283
Share
FD15 - Today was the start of the third week of flowering. I gave #1 2.5-liters of water @ pH 6.1. FD18 - I gave #2 2-liters of water @ pH 6.6.
Likes
1
Share
@PapaTerps
Follow
British Delight - Wizard Trees Day 77 - Watered with 3L of RO tap water with nutrients, mixed individually, in order and then pH'd to 6.3! Week 6 of flower and she's growing good, she's very bushy so I had to remove a lot of foliage from her, especially at her canopy level, as it was blocking the whole plant from receiving sufficient light 😅 as a result, she's the shortest plant in the tent, so she'll have to be raised up to meet the rest of the canopy - let's hope she starts bulking fast now 🙏🏻
Likes
1
Share
Me está gustando mucho como huele Muy frutal Estoy agradecido ya que las plantas resistieron y siguen creciendo Revisando parámetros y limpiando Alistando para el día de corte
Likes
4
Share
@KrazyK
Follow
Plant went hermie. Has some seeds. Really a heart breaker. Still frosted everywhere.
Likes
41
Share
Welcome to Sweet Seeds Cup 🏆 Hey everyone :-) This week she has grown very nicely 😊. It increases very quickly and beautifully. Today she got the last time the organic vega fertilizer, since the lighting was switched to 12/12 about 6-8 days ago and started to produce her flowers. The next dose is the first dose of Canna Bio Bloom ☺️. Tomorrow I will take 2 - 3 shoots down from the bottom, that the full production goes to the thick buds above and will not be wasted on small popcorn buds at the bottom 😍🤗. Next weekend the next update follows as usual 👍. I wish you all a good start into the new week 👌, stay healthy 🙏🏻 and let it grow 😎🌱. Sweet Seeds Cup 🏆 Type: San Fernando Lemon Kush ☝️🏼 Genetics: OG Kush x Kosher Kush 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 220 W 💡💡☝️🏼 Earth: Canna Bio ☝️🏼 Fertilizer: Canna Bio ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 6.0 - 6.3 💦💧
Likes
Comments
Share
@mando5121
Follow
Almost to the finish line