Para el riego: 💚3ml/lt Snoop's Premium Nutrients Grow 💚1ml/lt Pure zym 💚0,1ml/lt Raimil Riego de 1,5lt por planta aprox o hasta lograr un run off del 10% aprox. No tengo calendario para los riegos, volveré a regarlas cuando vea el coco algo seco por arriba. El led de todogrowled se puede regular, así que mientras están tan pequeñas están a 150w. La siguiente semana subiremos a los 220w. Y probablemente en las floración agreguemos el TGL 60 para dar más potencia. Iré subiendo fotos del avance de esta semana, si tienes alguna sugerencia, no dudes en hacerlo 💚 aún soy una novata jaja esta es la segunda vez que planto

Nov 13 - Day 94 - More bulking up, girls are holding water longer. Watered Older plant at 7.45PM. Started defoliating withered leaves with trichomes, I'm keeping those for now, and will combine with bubble hash trim. Nov 14 - Day 95 - Both pots aren't super light so I'll wait until tomorrow and water both at the same time. Starting to think about drying and harvest, I suspect there to be a fortnight between each harvest - but unsure if I can afford the tent space with next run growing. I think I'll water either as lights turn off (if humidity wont rise) or first thing on Nov 15. Nov 14 - Trichomes are milky with the speckle of clear and amber. Lets hope the lagging cola fattens up in the week to come. Nov 14 - WATERED Younger plant at 10.30PM. Nov 15 - Watered Older plant at 3PM Nov 16 - Watered Younger plant at 5PM Nov 17 - Woke up to 80F. Likely at higher temp for 1 hour before noticing. Defoliated a few leaves, including one or two with trichomes, of which I've saved. Nov 18 - Watered Older plant at 6AM. Younger plant pot is light at lights off- will water first thing in the morning. Also removed dead tips and accidentally chopped a healthy fan leaf. I was hoping to chop today, but it might be another week before the younger plant is ready. Nov 19 - DAY 100 - Watered Younger plant at 10.30AM. Trichomes are developing nicely, I suspect 1 more week with younger plant which makes me wonder when to chop older plant.

Moved her into a 27 L pot and started tying her down and spreading her out , had a small accident and ripped off a branch so had to duct tape it on and support it , pretty sure she’ll be sweet . Same same next week then start thinking about flipping into flower

8-31-25 all of the girls are doing good no big problems. All of the girls are getting heavy with buds. Really frosty looking really good. Should be about 6 weeks out from harvest.

This is nuts lol 😆 I may have fast forwarded through the pictures, apologies, they are loads and more difficult to work through. Consider a week and a half missing from flowering so far. She is not close to finishing yet as far as I can tell. As new white hair are growing, very obviously. the orange hair is quiet a few but they were kind of there all along. Smell is sweet fruity but not as powerful yet. Buds are sticky and solid, Every cola is sticky, solid and huge and still growing.

Tuesday update Ok so the plants are on a 12/12 cycle now and have been for about a week but I’m not counting it at a flowering weed until I. See pre-flowers at least. I’m surprised they hadn’t really reached sexual maturity by the time I flipped but it’s all good. They are getting to a very respectable size now - more so than that, they all have a really decent amount of growth nodes and are growing outwards more than upwards because of how I have topped, defoliated and got rid of the crap lateral branches at the bottom that don’t do anything. I was actually really amazed at how compact and scraggly they were at the bottoms of the stems when I came back and checked them today. They look much more bushy and straggly than the autos I have grown. I would say there is more need to have lolipopped and topped and stuff than with autos. If you really want you can just leave autos to get on with it and they don’t go TOO bushy at the base where as these really needed a tidy up. I do see a couple of pistols now which is starting to stop my worries about their sexual maturity and time management. With photos are you supposed to veg until you see them pre-flower? Or do they only show pre-flowers once you flip?

This C4 auto was very fast to flower, and stretched up to produce some very pretty, berry smelling/tasting nugs! The buds didn't flower very dense, they formed as fox-tail shapes. Yield is on the low-end of acceptable, but good considering the bud structure! I'm growing another next run, to compare phenotypes!

All getting top heavy, had to tie alot of them up. Buds are nice and dense and have taken well to the nutrients in the past few weeks. 2week ripen and flush starting 7/2/21. Nice frosty buds on all of them and my favourite plant still standing out has to be the zkittles OG. On the other hand the do si dos smells like it packs a punch! Update 11/2/21- will be flushing for 5more days then leaving in darkness for 3days before chop.

9/16 - Did some light defoliation today and adjusted the LST. With the Nature's Living Soil Autoflower mix, I don't have to feed them. So these have been SO easy to grow. I just water with RO water and organic blackstrap molasses (unsulphered). 9/20 - Watered and adjusted LST. All 3 GSCs have begun to flower! They are now on their way.

Turnin very yellow the last few days, she goin nicely though, hope she keeps it up, because she is very small... hope she delivers!! Looks good! 3th lamp in the tent 🤞🤞 Gainin nicely, turnin white on the buds She´s juicier than her bigger permanent marker sister

0.23v tuned to 7.83Hz Plants exposed to the Schumann resonance often show greater resistance to stress factors such as drought, diseases, and pests. It is possible that these natural electromagnetic waves strengthen plants' immune systems and increase their ability to resist disease. Pretty neat, in the afternoon when the tent hovers around 84F the plants are 🙏, can visually see in time around 10 minutes after I opened the tent the temp had dropped to 76 pressure was lost, she is still chilling but she doesn't quite have that perk anymore. *Salinity3.5% - 100ml H2O=100g The concentration of salt in a solution 3.5%= 3.5g in 100ml. Growing well. Not going to top or do any training, I'll let the plant do its own thing, she is constructing foundations now for what she senses ahead. Smart girl. ✨️ Let her, do her thing, let me do mine. The voltage that is needed for electrolysis to occur is called the decomposition potential. The word "lysis" means to separate or break, so in terms, electrolysis would mean "breakdown via electricity. Green hydrogen is hydrogen produced by the electrolysis of water, using renewable electricity. The production of green hydrogen causes significantly lower greenhouse gas emissions than the production of grey hydrogen, which is derived from fossil fuels without carbon capture. Electrolysis of pure water requires excess energy in the form of overpotential to overcome various activation barriers. Without the excess energy, electrolysis occurs slowly or not at all. This is in part due to the limited self-ionization of water. Pure water has an electrical conductivity of about one hundred thousandths that of seawater. Efficiency is increased through the addition of an electrolyte (such as a salt, acid or base). Photoelectrolysis of water, also known as photoelectrochemical water splitting, occurs in a photoelectrochemical cell when light is used as the energy source for the electrolysis of water, producing dihydrogen . Photoelectrolysis is sometimes known colloquially as the hydrogen holy grail for its potential to yield a viable alternative to petroleum as a source of energy. The PEC cell primarily consists of three components: the photoelectrode the electrolyte and a counter electrode. The semiconductor crucial to this process, absorbs sunlight, initiating electron excitation and subsequent water molecule splitting into hydrogen and oxygen. Water electrolysis requires a minimum potential difference of 1.23 volts, although at that voltage external heat is also required. Typically 1.5 volts is required. Biochar, a by-product of biomass pyrolysis, is typically characterized by high carbon content, aromaticity, porosity, cation exchange capacity, stability, and reactivity. The coupling of biochar oxidation reaction (BOR) with water electrolysis constitutes biochar-assisted water electrolysis (BAWE) for hydrogen production, which has been demonstrated to reduce the electricity consumption of conventional water electrolysis from 1.23v to 0.21v. Biochar particles added to the electrolyte form a two-phase solution, in which the biochar oxidation reaction (BOR) has a lower potential (0.21 V vs. RHE) than OER (1.23 V vs. RHE), reducing the energy consumption for hydrogen production via biochar-assisted water electrolysis (BAWE). BAWE produces H2 under 1 V while eliminating O2 formation: key word "eliminating". Air with a normal oxygen concentration of around 21% is not considered explosive on its own; however, if a flammable gas or vapor is present, increasing the oxygen percentage above 23.5% can significantly increase the risk of ignition and explosion due to the enriched oxygen environment. The addition of ion mediators (Fe3+/Fe2+) significantly increases BOR kinetics. Air: Nitrogen -- N2 -- 78.084% Carbon Dioxide -- CO2 -- 0.04% Hydrogen in homosphere H -- 0.00005% Hydrogen "GAS" H2 in homosphere - 0% "Nitrogen, oxygen, and argon are the three main components of Earth's atmosphere. Water concentration varies but averages around 0.25% of the atmosphere by mass. Carbon dioxide and all of the other elements and compounds are trace gases. Trace gases include the greenhouse gases carbon dioxide, methane, nitrous oxide, and ozone. Except for argon, other noble gases are trace elements (these include neon, helium, krypton, and xenon). Industrial pollutants include chlorine and its compounds, fluorine and its compounds, elemental mercury vapor, sulfur dioxide, and hydrogen sulfide. Other components of Earth's atmosphere include spores, pollen, volcanic ash, and salt from sea spray." Although the CRC table does not list water vapor (H2O), air can contain as much as 5% water vapor, more commonly ranging from 1-3%. The 1-5% range places water vapor as the third most common gas (which alters the other percentages accordingly). Water content varies according to air temperature. Dry air is denser than humid air. However, sometimes humid air contains actual water droplets, which can make it more dense than humid air that only contains water vapor. The homosphere(where you live) is the portion of the atmosphere with a fairly uniform composition due to atmospheric turbulence. In contrast, the heterosphere is the part of the atmosphere where chemical composition varies mainly according to altitude. The lower portion of the heterosphere contains oxygen and nitrogen, but these heavier elements do not occur higher up. The upper heterosphere consists almost entirely of hydrogen, cool. 78%nitrogen as N2, a far too stable bond to be used by organisms. 20%oxygen 0.04%co2 0.00005% hydrogen When lightning strikes, it tears apart the bond in airborne nitrogen molecules. Those free nitrogen atoms N2 nitrites then have the chance to combine with oxygen molecules to form a compound called nitrates N3. Once formed, the nitrates are carried down to the ground becoming usable by organisms. Will it react with the oxygen in the air spontaneously, the answer is no. The mixture is chemically stable indefinitely. A mixture with air near the release point can be ignited, but if this does not happen then when its concentration gets below 4% it will be unable to carry a flame. Taking a small detour into chemistry here, a key concept to understanding the health impact of nitrogen-based compounds is knowing the difference between nitrates and nitrites. What Are Nitrates and Nitrites? A nitrite (NO2) is a nitrogen atom bonded to only two nitrogen atoms. Very strong bond A nitrate (NO3) is a nitrogen atom bonded to three oxygen atoms. Weaker bond The optimal pH for nitrate (NO3-) depends on the process and the type of bacteria involved. Nitrification The optimal pH for nitrification is between 7.5 and 8.6 Nitrification is the process of oxidizing ammonia to nitrate and nitrite Nitrosomonas has an optimal pH between 7.0 and 8.0 Nitrobacter has an optimal pH between 7.5 and 8.0 Nitrification ceases at pH

Day 72, 21st of November 2020: Gorgeous, tall and strechy. Nice nice and nice. Straching has stopped finally and more work on buds. Amazing creation. All good as it can be seen keep getting older haha. Buds are on the way getting fat ;) Fertilization is the same every 2nd day with the mix and the ratio above.... All LST has been removed as the plant remains the same so no need to keep her in "chains". The lamp is on 11.30 min and off 12.30 min. Last week was 15 min longer light cycle.... So every week 15 min shorter light cycle until the 5th week. So far -30 min. It switches on at 6 am and off at 17.30 pm.

Se empieza a fertilizar de a poquito 👌👨‍🌾🏻🍀

This past week I was out of town. However, I set up an auto watering system for two girls and one lived off the auto pot. Seedling 1 - Largest in clear container Seedling 2 - Autopot Seedling 3 - The “Late Arriver” I monitored the process and tent while away and was not let down. Came home to the nutrients finally being delivered, so the girls received fresh water with a first dose of “minerals and food.” I’m just stoked they survived in my absence!

This plant has a solid stench of pure ripe lemons. So much aroma and color in every bud, purples, to dark green, to lime green, to solid frost. This one definitely a fun strain to watch grow and tend too for the last few months. She’s definitely a hungry girl, seemed to be the only strain out of the three that accepted and thrived with full feed nutrients. Would definitely recommend this Strain to someone For a nice uplifting day smoke, also seems to do me good for some pain and stress relief.

Added bit of nutrients this week.Still the plant presents some decoloured spots on the leaves also on the new ones.Im thinking Biobizz soils its too much fertilized...Anyway still growing so fast day by day Day 21 topped the plant.

For the first time this week I added fertilizer of 0.5 each, and faced a very unpleasant problem, the plant rushed up so much that at the moment the top cola reached the height of the lamp, and the temperature there is quite high, very much afraid that it could damage the plant itself, and It all happened because I did the maine lining, and the central cola went to grow up, I don’t know how to solve this issue, but soon I think I’ll decide this question, wait for 6 weeks!

Se siguió doblando ciertas ramas por que si no se iba a descontrola en altura, no me imagino lo alta que puede llegar a ser si a lo hancho ah demostrado ser bastante buena