Likes
Comments
Share
Every beginning has an end ... The Jumanji by Cellmax is almost over , last few plants left are finishing the fade. This will be the last week before putting the plants on Harvest. Greetings to Cellmax for their nutrients, they really rox 👍 I will put details about it on Harvest 😉 N.B: Looking for a job in the Cannabis industry as a mineralogist, plants keeper, master grower, or quality controler 🐞
Likes
16
Share
Ok, so it's slowly getting thicker and frostier. At week seven my girl could be ready in anywhere from two weeks to four weeks more. The light was dropped closer to the top of the canopy. I decided to try 15 cm of distance, as well four 50W LEDs are not as powerful as the 600W HID or LED panels that are usually used in grow tents. I will of course keep an eye for signs of light and heat stress, but I suspect that won't be a problem. Update Day 89. Today I decided to turn the plant around to see the back colas and their growth. Then I found some mites under the leaves after examining weird spots in a couple of leaves. It seems to me that there was not enough airflow to deter the mites from making home in the back leaves, when compared to the front leaves of my plant. Lesson learnt, rotate plant often, ensure good and even airflow. I didn't find any webs beside a really small one seen on the video (most affected leaf). So, I think I found them mites early. I only found this kind of damage on very few leaves, and each leave contained less than 8 mites (at least that I could see) and a couple of eggs. So it seems that paying close attention to my leaves saved me from an out of control infestation. Anyhow... I removed all of the leaves that had even a single mite, or a single mark of discoloration. Also, I disinfected the grow tent, top of soil and lower part of the branches by spraying them with a 1/4 tbsp of bleach per liter of water. After that was completely dry, I mixed one part rubbing alcohol with 9 parts water and misted both sides of the leaves and even the buds directly (ethanol evaporates easily, so there shouldn't be residues left after it dries completely). I got these remedies from https://www.growweedeasy.com/cannabis-plant-problems/how-to-get-rid-of-spider-mites I will apply them every 3-4 days and keep a good eye on the leaves. Prevention is key, and some aspects I could've considered before are: 1. not grow any other plant next to my cannabis 2. Don't come into my indoor growtent after tending my outdoor plants. 3. Ensure even and plenty airflow. So, I attacked back strongly. I cut more leaves than those that showed damage, to increase airflow. I will be on the watch for pests and will rotate my plant often, as well as spraying a few times every week, just to make sure they don't come back. I also am going to build a kind of metal wire cage to separate the colas further and make it harder for any pest to spread. Its only my second grow, but from what I've read online about mites, it's way more costly (time and money) to deal with an infestation than to strike them hard early. I guess that specially now that I noticed them before they even made webs. Look closely at your girls growbros ! Update day 90. So this morning I. Becker the trichomes and they seem to have gotten more cloudy. I am not an expert at that, but they are starting to be fewer clear and more milky. I will keep an eye on them, but it think harvest might be here very soon, probably closer to the 9 week mark than to the 12 week one (I'm about to finish the 7th week)...
Likes
9
Share
@Rizik86
Follow
Day 65 - Checked PPM 575. Day 66 - Checked PPM 570. Some white hairs are turning amber. Day 67 - Water isnt as low as normal. Gonna ease up on nutes. Added 20 mL of Overdrive. PPM is 667. Day 69 - Checked PPM 522. Added 10 mL of CalMag Micro Grow and Bloom. Added 10 mL of each additive. PPM is 1,560. Day 72 - Checked PPM 1,590. Diluted with RO water. PPM is 610. Just starting to smell the bud but its faint. Day 75 - Checked PPM 560.
Likes
9
Share
@GYOweed
Follow
Caught the ladies trying to sell themselves in the red light district. Gonna givem cytokinins so they stop stretching for attention.
Likes
1
Share
@Ogchemst
Follow
First day in Flower! It's been... very interesting 2 weeks.. now that I survived tha, im having some lockout due to being unable to take care of my plants for the past 5 days and someone having no idea had to do the job, I'm not afraid of showing these mistakes I'm always looking forward to the outcome so I'm still having some hopes for this og kush, not everything here went as planned and that's why I want to focus on finishing up the grow and starting new ones, better ones as soon as possible, I will definitely never grow autos again as I'm just not a fan of them having to be on 18/6 schedule and I like having co trolley over my plants as sometimes things can go wrong. Og kush had a lockout after flush it grew beautiful but still ate up some of the upper leaves. Runtz.. yeah I like him he is a beautiful little bonsai he didn't get lockout too much but also did I'm looking forward to seeting the stretch on him if it so happens. Cherry gusher, a tiny pheno I got this time I'm looking forward to growing 4 next time and hunt down a pheno. They say outdoors you have to play with God and indoor you try to play God.. we are not perfect and that's why I'm looking forward to the finish line. Will i scrog? I have the net setup but I'm not sure if I will get enough stretch. Day 3 I noticed some light white spots on bottom leaves of the plant after a flush I did recently, I diagnose this as magnese or magnesium deficiency, I'm going to up the cal mag to 8 ml and a+b to 10ml per 5 L of water along with additives extra 0.5 ml just as a touch up. Also I noticed we are at 47cm at the tallest branch after topping and lst and this thing is an absolute bush.. I could probably hide behind it if I was a kid playing hide and seek!.
Likes
2
Share
Pulling it out the fridge in a lil bit
Likes
42
Share
@Hashy
Follow
Notes. Week 18 (week 11 flower) Light settings 12/12 on at 9.00am off at 9.00pm Viparspectra Light power= 75% 165w VPD aim 1.0-1.2 DLI aim 35 Extractor settings temperature 23c with 0c steps Humidity 30% with 0% steps Max speed 10 Min speed 4 Monday 17/7/23 Day 120 (day 74 flower) Looking good. Tuesday 18/7/23 Day 121 (day 75 flower) Defoliate Wednesday 19/7/23 Day 122 (day 76 flower) Harvest #3 338g Hung to dry. Extractor settings temperature 20c with 0c steps Humidity 50% with 0% steps Max speed 10 Min speed 2 Thursday 20/7/23 Day 123 (day 1 dry) Removed some fan leaves. Friday 28/7/23 Day 132 (day 9 dry) Trim #3 FBPHP14, dry 38g. Larf 4g. Saturday 29/7/23 Day 133 (day 1 cure) Saturday 5/8/23 Day 140 (day 8 cure) Put humidity packs in the jars. Friday 11/8/23 Day 146 (day 14 cure) Stop using auto burping system now and burp less frequently for a bit. Saturday 12/8/23 Day 147 (day 15 cure) Sunday 27/8/23 Day 162 (day 30 cure) Sampled Stats for the grow #1 377g #3 338g #4 276g #5 393g #6 312g Total wet weight =1696g #1 FBPHP12, dry 40g. Larf 4g. #3 FBPHP14, dry 38g. Larf 4g. #4 runtz, dry 29g. Larf 2g. Rot 5g. #5 Pink Rozay, dry 38g. Larf 6g. #6 Candy Rain, dry 34g. Larf 0g. Total dry weight. 179g Total dry larf weight 16g Loads of trim so going run some hash.
Likes
29
Share
The final flush begins for LSD. She smells unbelievable, has dense large buds and a ton of frost! That's all for this week, tune in next week when she gets harvested! 👽🌳🔥
Processing
Likes
16
Share
@MrWolfe
Follow
Moved the tents outta here 😂 switched some ventilation up and added two more dumps, I need to get more fans down here lol these girls look great all day every day, can't wait to see how it goes! They are all loving life, smaller clones have even had an awesome rebound the last few days since they got topped so that's cool. This week went great, started out stripping and topping everywhere I could and ended with beautiful roots going up to three fallon pots, gave a nice full watering to all of the and will see how they drydown tomorrow, I'm gonna guess they won't want water until the day after, I want them to really reach out into their new pots.
Likes
7
Share
She growing very well, her main stem was 4mm thick on day 13 which means that plant left the seedling stage and she's thick enough to top it, to make 4 main nodes instead of 1 (topping autoflower is risky it may stunt your grow) you can aways try LST Don't forget to use a small fan for air circulation On day 12 distance from the light is 36cm (14") 640PPFD No nutrients has been added, only water PH 5.8 - 6.0 Water your plant only if the top 5cm (2") of your soil feels dry if it's still wet leave it alone.
Likes
4
Share
@GroloCup
Follow
She's blown up and smells like grape kool aid mix poured into a cup of gasoline. Then look at that deep purple. Brother Geoff's selection is definitely a thing of beauty.We're adding some green sensation to the nutes and sticking to this autoflower feed and training schedule for the small tent I've put together that's really given me consistently quality harvests in limited space. Here's to another week of growth and flower development!
Processing
Likes
23
Share
They are loving bein in the ground. Can't wait til the fall😁😁. All goin smooth and the ladies are exploding. Based on what these strains are doin indoor, I'm gonna be in heaven come October. Debating finding space to put the 3 pots in the ground.
Likes
56
Share
The Gorilla girls all popped the soil overnight from potting. Day 1 with a bang. lol The cheese broke on the second evening and even now at day 11 , 2 are still struggling to escape the soil fully. Frustrating to watch helplessly. The Gorilla girls are all nice and settled in on day 11 ( today) . I am watering occasionally and keeping it wider than the plugs width to encourage the roots to explore out. The Amnesia are still dormant so I have excluded them from rhe grow this far. dissapointed is not the word and no idea why they failed so badly ??. The potential growers are settling in now so hopefully a good weeks growing will bring them to heel.
Likes
15
Share
Wow this week has been a super bulking week. Buds are huge and dense when you squeeze between thumb and forefinger there’s no give at all. Very sticky lives up to the GG name. Smell is very strong earthy and almost a diesel undertone.
Likes
13
Share
Little defoliation Plants are happy smelling allot
Likes
37
Share
It’s warming up outside so the a/c and dehumidifier are working a bit. Got the lights on during the night so just a few hours at lights on they work a bit hard. Cleaned up underneath removing any sucker shoots and leaf that was near the soil. Not much really. Mostly on #3 as I didn’t train out the branches as much and she grew tighter together, so I removed mostly all inner growth blocking light and that allowed a lot more penetration and flow. Left a few leaves below to die off naturally…more the better. Gonna put some Grub Grenades in the pots with some yellow sticky cards. Not because I see anything, just being cautious. I do see what looks like Springtails but don’t seem to be an issue yet. Still looking green and healthy so I’m happy! Grow on! Update Made a few adjustments. I let the tops grow into the tsw2000, 18” to tops. I didn’t like how they looked so I raised it back to 24” where I’ll keep it. The “Kind LED” I know from previous grows that it can’t get closer then 24”. But this is my first run with “Mars” so I’m still figuring out the distance for my setup with additional overlapping light intensity from other lights. With that being said another pod failed so I’m down 2-Kind LED’s now. Gonna remove all old tech and use all newer TS series lighting. All Mars moving forward. Seems to be a great light and when compared to other quality lights you can’t beat the price!
Likes
6
Share
It was overall a very very fast grow, definitely in the room im growing in now. I had 2 different lights on her and she still decided to be done within 10 weeks!
Likes
6
Share
@420Hydro
Follow
Been a good week gonna try up ppm a little...been getting little ph drop and don't have any root issues..... so think they are hungry..also maybe a little magnesium deficiency on back plants so might add a little epsom salt see how that turns out...