Recommended
Likes
11
Share
@Hix57
Follow
La semaine 5 s'est déroulée plutôt bien, même si on a eu un petit excès d'azote. J'ai décidé de stopper complètement l'apport d'azote et de passer à une alimentation exclusivement dédiée à la floraison pour le moment. Mes plantes ont fini leur phase d'étirement et se concentrent désormais sur la formation des fleurs. En douceur, je commence à retirer une à deux feuilles par jour. Un grand merci à louloutre pour son précieux coup de main ! 🌱
Likes
7
Share
@Tio_Shuni
Follow
Un hobby que demanda mucho tiempo, hago lo que puedo con los horarios, espero disfruten este crecimiento de las hermosas presentes. Primera semana de Floración, espero las raíces dejen de crecer, no tengo contemplado hacer un cambio de macetas 😬 Riego cada 2 días, para ser invierno toman mucha agua 2L. por maceta 6.3 ph.
Likes
19
Share
@MrGrowMan
Follow
I felt very good inside, Today is over and I feel so bad It was delicious, aromatic, high, short but long, I bought it as autoflower but it took a feminized time
Likes
34
Share
@JonnyKush
Follow
Day 38 I am very happy with how they are growing. finally begins to flourish, the LST seems to have paid off. from last week I started giving green sensation 1ml / l without adding anything else. thanks for viewing it is my first growth if you see errors comment and correct me. hit like and follow me for updates. happy day and good luck with your growth 🌱💚
Likes
4
Share
Took well too last weeks flush. 💧 Did some defoliating to allow light deeper into the canopy. ☀️ Putting back on recommended strength nutes.💉
Likes
4
Share
@cowstick
Follow
Defoliation week. Cleaned up under the canopy, and clipped the subpar Bud sites under the canopy. Foliar spray in use until end of week 4. Started to drop the temp to simulate changing of the seasons. 70*f during lights on, about 63*f lights out. Start of the week had an issue with the tent. After watering, the tent humidity went up to 90%. I have my Humidifier set to keep VPD between .8 and 1.2 and the system was trying to balance out between temp and humidity. Got cold one night. 3 days into this week and I haven't watered since last week. Soil still has plenty of water in it.
Processing
Likes
5
Share
She's being grown without any training method,just 100% natural and organically grown,in her soil mix she has guanokalong seaweed powder,complete organics and grow and flo by florians living organics which is full of humic and fulvic acids and 10 different types of mycorrizae and beneficial fungus,plus I'm watering with guanokalong extract and also my lactobacillus liquid made by myself,she looks super happy and green,she's definitely a big lady and she loves her house 😍💚🌱 #organicmedicine ✌️
Likes
35
Share
@farahweed
Follow
#Day 123 #Week 6 flowering 💐 Oh my God, it's the 6th week of flowering The smell of children is crazy. This week I used advance hydroponics overdrive supplement at the rate of 2 mg/liter because it is really high quality. Thank you for your comment🙏🙏🌷🌷
Likes
9
Share
FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny REMO NUTRIENTS 👍 Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
27
Share
@Snowy
Follow
All ladies have grown a lot this week again, with the Blue Dream CBD growing at the rate of about 10 inches a week. That's almost a foot and I will admit to being a bit unprepared for this kind of growth rate, especially given that flowering season will not start until about late July... All said everyone seems healthy and happy. UPDATE - Interesting and unexpected development: the ladies (both Trainwrecks) seem to have flipped into flowering. I have no idea how this happened at this time of year. The seeds were not planted under lights, the plants have been sunlight only since they sprouted. Perhaps this explains the crazy growth all plants have been exhibiting. I'm keeping a close eye out on the two others to see if the same happens. Any thoughts?
Likes
54
Share
@ASCBOOGS
Follow
Day 43 veg been doing LST and super cropping but dunno if i should top all the bud sites please could someone give me some advice on that as I have never grown clones before Day 45 looking a bit better after super cropping and fimming all bud sites
Likes
11
Share
15.08 Second week going great. The mimosa pheno I hunted is a true monster. Thick stem already nearly as big as the 1.5 inch rockwool cube. Easily over 1 m high. Stacking beautifully. I have a new setup for the 5x5 tent. Vevor EC fan 150mm. With temp and humidity controller paired with prima clima 900m3h carbocone filter which is huge. Also new Mars hydro fc e 8000 light with Bluetooth controller. So far very cool. We will see how it performs. Since I have co2 boosted we will have it cranking at max when the girls hit the bulk phase.
Processing
Likes
10
Share
@HisHope
Follow
After dry Maddie dry weight 126 grams, Tammy now in dry wet weight 815 grams Tammy yield dry 153 grams
Likes
3
Share
Likes
8
Share
@Mikeyc420
Follow
Week 5 off flowering Buds have grow and are solid with the smell starting to get alot more potent the THC crystals are looking nice Light 11cm from the top of bud Humidity staying around 45-50% Temp 23°c - 26°c Ph 6-6.3 Over all I'm happy with my first grow so far
Likes
29
Share
My overall impressions of this strain from MSNL: Ive noticed that MSNL genetics tend to switch to flower earlier than all the ther autos i've grown. The initial growth on the plant starts out small going into flowering but then it starts to explode in growth. Because of the fast flip I start my feed at week 3, I used the full NFTG advanced feed, but only at 1/2 the recommended amounts of the early veg schedule they made. This plan of attack worked out well with these plants and by week 5 they could handle the full Nute schedule. A proper flush was needed at-least twice a week during the flowering period. It is a lot of work to maintain PH and soil PPM but its essential with the NFTG and if you do it right you WILL get rewarded with Danky goodness. I did the same exact training for each of these plants but right off the bat it was clear I had two very different phenos. Plant A grew very compact with extremely tight node spacing and barely getting to a foot in height by flowering. She was kind of tricky to train initially but I was successful at LST and light defoliation and that was pretty much the extent of the training she had. She grew to be short, stout, and plump AF with way frostier trichomes then her sister. Plant B was real easy to LST because she grew with a very wide open body type to begin with, the polar opposite of Plant A to be frank 😂. I was able to shape her easily and It seemed very successful due to the sure size of her buds ! I had close to 10 main colas on her that ranged from 6-10 inches long and she started to tilt over cuz of the weight towards the very end 😅 Overall I would definitely recommend using LST to some extent with these genetics because of the small initial growth you get at first. Start the nutes sooner than later. maybe week 3, but at half the strength. Feeding the soil would be a good idea right from the get go. Mammoth P is a cool microbe that targets phosphorus directly and recharge will slam pack your substrate with beneficial microbes and ive noticed a very clear difference after incorporating these into my NFTG feed. Another thing I did that seemed to help was weekly epsom salt (magnesium sulfate) sprays on top of my bloom khaos foliar sprays. I didn't deal with any deficiencies at all this time around following this feeding regiment 👌I also didn't notice any popcorn nugs on any of my stalks and I contribute that to my feeding schedule and the Spider Farmer SF2000 202W qb , that thing seriously blew these plants up! would recommend 100% !! Dubes~ *UPDATES* March 1st- I removed the two GDPS from 32 hours of darkness and chopped branches to hang and dry. Plant B had a wet weight of 19.9 oz! while Plant A finished at 12.1 oz wet(this is with branches and leaves still on obviously). Im attempting hang drying for the first time because my drying conditions will work better with this method. Im using my flower tent with the inline fan/charcoal filter for air circulation. Also gives me the ability to dry in complete darkness. March 7th-Trimmed both plants today after hanging for 5 days at 40%RH 62-68F. Plant A yielded 1.9 oz (54 grams) dry and Plant B yielded 3.5 oz (98 grams) so a grand total of 152 grams !! March 14th(1 week of cure/burping)- flavor update 1 week in of curing .. Pheno B is putting out huge diesel and berry aromas almost a little herby but mostly berries/diesel . Flavor is nice with hints of incense , berries, and diesel .. really good joint smoking week. Pheno A is completely different Than B , I do not get any diesel / berry smells at all its more of a fresh pine / herby smell. Im more keen for Pheno Bs smell because its more pungent and stands out a lot more but they both make excellent smokes and get me super stoned! March 20th(2 weeks of cure) - Yup this stuff is great. I love rolling Js with this shit because it gets me right where I need to be without needing any more. I can't believe how dense I got these nugs to be compared to my last run. I incorporated c02 into this grow half way through so maybe that helped achieve the density but one small nug fills my grinder up with fluffy danky bud!! Match 31st- (4 weeks of cure) - Both phenotypes ended up fantastically dense. One little nug fills the grinder 100% I would say this is the perfect smoke for anxiety and relation. The green pheno didnt have a berry flavor at first but the berries definitely come out. Both phenos have different aromas but similar tastes for sure. im still undecided on which pheno I like more. The purple one stacked up huge colas and out weighed the green pheno but the terps on the green pheno are way more pronounced and I even think the high is a little more intense. April 7th- (5 weeks of cure)- The money spot. all this weed is premium quality compared to my friends "street purchase" bud. I am giving this away to multiple friends and I can't get them to stop bothering me for more haha. Definitely a great relaxation aid and sleepy time medicine if that's what you need, seems like most ppl need their night smoke before bed these days so this is the strain they need! 100%
Likes
5
Share
@Mattyice
Follow
This one grew extremely weird. For two months it didn't flower and for almost 4 weeks after veg it stopped growing. Then after two months the main cola started flowering and stopped, then all the other lower branches outgrew it. Now 90% of the branches have outgrown the main cola. No topping or training done until just recently so it did everything on its own lol weird. Super skunky and spicy. Way stronger smelling than the full grown plant right next to it lmao I'm excited to see it flower the rest of the way idk why it's taking so long its an autoflower. Halfway through the video I part the branches to show you the main cola now buried by everything else but still looking pretty good