Ladies looking good just flipped 12/12 Lights for flowering Scorpion Diablo And 2 1000 hps

Hey guys :-) . Today the plant was sprayed again with neem oil. There weren't any more trips to be seen after the second application, but to be on the safe side, you did it again today get a cure. That's why the beautiful dark shimmer on the leaves :-). The ladies are developing well and have 1 week before I change the time to flowering. Normally I would let it get bigger and train because the tent only has 80x80 and 180 watts are available, so I will switch it over soon enough. This week it was poured twice with 0.8 l each time (for nutrients, see table above). Otherwise everything was cleaned and, as always, everything was checked. Have fun with the update and stay healthy 🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.exoticseed.eu/ Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.4 MadeInGermany

Wednesday, January 27 Fed plants yesterday(26JAN) 3/4ga each plant. 2tsp/ga ratio of Bud Candy pH’d @6.3’s. Have a compost tea brewing that I will feed them tomorrow. Compost tea is comprised of 1 Cup of worm castings and a 1/4 Cup of bone meal powder. Bone meal powder is a great source of calcium and phosphorus to help in the flowering stage. I also added 1.5tsp of Great White Myco root powder to 3ga of compost tea. This morning I noticed little white hairs growing out of pistils all over the plants! Finally, signs of early flowering since switching to a 12/12 light schedule this past Saturday. Plants have shown a sizable amount of stretch in the past couple weeks so I’ve projected at about 6-8 weeks from now for a harvest? I’ll keep y’all posted on the days ahead and as always, stay safe and happy growing💚✌️🌱 Thursday January 28 Fed plants about 3/4 ga each of compost tea @6.3pH. Hopefully will respond well to their first tea. I’m going to continue to do more research on compost brews to dial in the process. Stay safe and happy growing💚✌️🌱

Had few issues this week with slugs and rabbits in this new spot. It’s shot up since she got put in ground, gave her a good feed with grow and plants of water as we’ve had good 2 weeks without rain so ground was bone dry. See how this week goes, if good growth and not been attacked will start to train her out abit. All for this week happy growing 🌱

Fast BUDS OH YAH! excited to see these leaves growing . Going to teke it easy with her for the next few weeks. Day 10- Had to get a humidifier because my RH is to low. Leafs are dry but she's looking healthy to me! Day 12- Growth is on pace and she's looking happy with her new humidifier . RH is up to 45% and temp is at a constant 80F . Life is good for this young one. Day 13- Notice the leaves on the third node growing are misshaped on this one. interesting.

I reduced nutrients. Powdery mildew is continuing and getting slightly worse. I sprayed it with an apple cider vinegar mix. Hopefully that helps. The smell on the flower is really incredible. Smells berry like, and clean. I opened all vents in tent and have been leaving the window slightly open as well. Heater is keeping up ok. Even in the cold nights it’s keeping it at 66F with everything open. The leaves went crazy refilling the canopy. I’ve been pinching off some of the longer leaves and some that had mildew. The buds look good. Trichomes are cloudy enough yet, but it’s getting close. I’m gonna err on an earlier harvest, if the powdery mildew continues. I’m making some LAB from KNF, along with other natural fertilizers. If the vinegar solution doesn’t help, I’ll try that when it’s ready. Excited to try KNF on my outdoor garden and lawn. Planning on growing a couple canna plants outside this year. Gonna keep my outdoor as organic and natural as I can. The clone is doing well. The areas that I knuckled are strong now. Looks like biceps. Powdery mildew seemed to get this plant worse than the other. I’ve been wiping it off with my fingers as I see it, and finally treated with the vinegar solution too. I increased its feed to week two of medium gh feed chart. Expecting a lot of growth this week even with little light. Getting my dry closet ready as well. Got another humidity controller and an upgraded temp controller with Wi-Fi. Gonna dry one more time inside my house. It’s dry enough inside that I should only need a humidifier to keep it right. Need to get another one before I harvest and then should have everything. I used grove bags last time to cure and will never use anything else. Ordered another cheap TDS meter. The one I had got dropped in the solution. Update: 2/11 The apple cider vinegar definitely cleared the powdery mildew up, but I found a few spots I think I missed directly in the middle of the large plant. I don’t see anything on the clone. I’ll reapply in a few days and pay closer attention to the middle of the plant.

Start of week 8 feeding at EC 1.0 then water only the following week

Plants keep growing good, without excess or nutrient fault. So happy They have doubled the size. +17 cm. As i commented before i'm struggling with the height of the tent, I hope they stop but I don't think so I have switch ON the flowering leds to invite them to start flowering. Also is the first auto strain that vegs for 34 days and there aren't signs of preflowering. The vendor states that the complete life is between 70 and 80 days... I don't care about time but yes about space. Thinking in setup a scrog mess, but i don't know. day 36 - I see some preflowering signs at one plant. Ads you can see in the pictures the higher was nearly touching the leds and I dind't had margin to move it upper, so i have lowered the base around 10-15 cm and now they have some space to go bigger at flowering. I have taken advantage of the occasion to take out all the plants and take some photos out of the closet, hope you like it. In 2 days more i will do a root cleaning with specific solution and will change all the water for preflowering doses Also the smaller one was damaged during this process, i hope she recover fast. I will apply some wound paste on that to avoid more stress; you can see too that the smaller one is not straight due to bigger one blocking the light. With lowering the basethere is a humidity reduction of around 10%

Tutto perfetto 👌 a settimana prossima. Buon anno a chi legge 😉

Very well growth and very fast very strong Indica great taste around 11 oz yield four and a half months total good cannabinoids drying was a lot longer than normal

Floracion (Tiempo estimado 64 dias) Quinta Semana de Floracion 05/02/2024 - 5:00hrs y 22hrs: Se hace cambio de solucion nutritiva, con parametros ajustados a la semana, Se hace Lavado de cubetas, tuberias, bomba, humificador, y perifericos, Se realiza limpieza completa del indoor, Se verifican parámetros básicos del agua, mantener cuidados específicos, el olor es mas penetrante pero gracias al filtro de carbono se mantiene fuera del indoor sin aroma, empiezan a observarse mas el crecimiento de los Cogollos. Agua de osmosis: Ph 6.0, PPm 950-1200, Ec 1.9-2.3, Temperatura 18°C - 24°C Ambiente: Temperatura 19-25 °C, Humedad 65%, Ventilación 20%, 12 hrs de luz , 12 hrs de obscuridad. 06/02/2024 - 5:00hrs y 22hrs: Se verifican parámetros básicos del agua, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm 950-1200, Ec 1.9-2.3, Temperatura 18°C - 24°C Ambiente: Temperatura 19-25 °C, Humedad 65%, Ventilación 20%, 12 hrs de luz , 12 hrs de obscuridad. 07/02/2024 - 5:00hrs y 22hrs: Se verifican parámetros básicos del agua, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm 950-1200, Ec 1.9-2.3, Temperatura 18°C - 24°C Ambiente: Temperatura 19-25 °C, Humedad 65%, Ventilación 20%, 12 hrs de luz , 12 hrs de obscuridad. 08/02/2024 - 5:00hrs y 22hrs: Realize por la mañana riego foliar con agua de osmosis sobre toda la planta, quedo empapada, al iniciar el ciclo de luz y verificar la planta se noto lama dentro del recipiente de la solucion y canastilla hidroponica por arriba y abajo de ella, La unica accion que realize fue quitar la malla de guia para que subieran los tallos y no se contaminaran, Se verifican parámetros básicos del agua, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm 950-1200, Ec 1.9-2.3, Temperatura 18°C - 24°C Ambiente: Temperatura 19-25 °C, Humedad 65%, Ventilación 20%, 12 hrs de luz , 12 hrs de obscuridad. 09/02/2024 - 5:00hrs y 22hrs: Se realizo limpieza de la mold en el cubo hidroponico, acomode los aspersores de modo que el chorro de agua diera al mold, cambie la bomba de oxigeno, se nota un cambio por la tarde considerable, Se verifican parámetros básicos del agua, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm 950-1200, Ec 1.9-2.3, Temperatura 18°C - 24°C Ambiente: Temperatura 19-25 °C, Humedad 65%, Ventilación 20%, 12 hrs de luz , 12 hrs de obscuridad. 10/02/2024 - 5:00hrs y 22hrs: Se observa mejoria considerable en las raices y el cubo hidroponico, Se limpia el prefiltro del extractor de 8 pulgadas, Se verifican parámetros básicos del agua, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm 950-1200, Ec 1.9-2.3, Temperatura 18°C - 24°C Ambiente: Temperatura 19-25 °C, Humedad 65%, Ventilación 20%, 12 hrs de luz , 12 hrs de obscuridad. 11/02/2024 - 5:00hrs y 22hrs: Se nota una mejora considerable en la raiz y en el cubo de reserva, Parece haber desaparecido el moho, Se verifican parámetros básicos del agua, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm 950-1200, Ec 1.9-2.3, Temperatura 18°C - 24°C Ambiente: Temperatura 19-25 °C, Humedad 65%, Ventilación 20%, 12 hrs de luz , 12 hrs de obscuridad.

so... was of to any awesome start to the week topped them and started low stress training but at the end off all of it.... my torque got caught on the wire and she got more of a topping then planned thats for sure!!! ill just let here go for gold now leave her be.. had bad root rot and the only thing i can get in Australia is root stop unless someone knows something better..... i soaked the two dwc in the root stop substance for 4-8 hours... it seems to have lightened the root colours. i decided to cut the one that had root rot bad and cleaned and prepared it to transplant it to coco...

Ztrawberries= as you can see from the pic and video these girls are skyrocketing climbing almost an inch a day. Showing good signs of pre flower, very impressed with dominant heads coming through on all these ladies 👌🏽 Tropicana cookies = These girls are just showing off there stretch rate match that of the ztrawberries and it’s and impressive spectacle to watch also showing good signs of pre flower Cherry Cola = These girls seem a week slower than the rest none of the less they are showing a decent amount of heads just no signs of any stretch. O.N = Ztrawberries and Tropicana Cookies have had some defoliation not really touched Cherry Cola so I don’t cause any unnecessary stress. EC increased from 1.1 to 1.3. Very happy this week!!

Day 1 week 2 Day 2 week 2 Day 3 week 2

Progresan adecuadamente,,,😃

week intel: we reached the peak of flowering stage and need to cause a little more e.c stress from this week so e.c stress is twice a week i reduced the amount of Nitrogen and calcium and stopped feeding silicate in other hand i raised the amount of base nutrient and booster short story version: more K & P - less N stresses : a little E.C stress around 1.6 and 1.7 twice a week from this week feeding: i feed them 3 times this week with this order : day 1 : i feed them high with base nutrients(calcium & micros (half dose) + Bloom) about 822 ppm - 1.6 e.c to cause a little stress. day 3 : i feed them low dose of Top-Max + B-52 around 525 ppm - 1 e.c to let them recover a little but not fully recover still a little stress will caused. day 5 : i feed them high dose of Feeding Booster around 850 ppm - 1.7 e.c to cause e.c stress again guide of the week : from this week we can cause more E.C stresses. e.c stress if done correctly is one of the very few ways to increase quality in all aspects ( color , aroma , taste , bud structure , resin contents ) but if you over do it , listen carefully brother : it can reduce quality in every aspect so always look for signs and never reach the red line.