The Grow Awards 2026 🏆
Likes
Comments
Share
@Ksouth1
Follow
Last week went well. She is still growing like crazy. Happy that the weather has started to act right so I was able to get her put in the ground. She had more roots than I thought. I think she will grow rapidly now with the strength of the sun and having unlimited root space. I did some lst, supercropping and defoilation to open her up and to create the best structure to build on. After long I will prepare to support the mains so she doesn't snap her branches. I will update as she progresses. There will be more joining her soon. Until next time happy growing to everyone!
Likes
4
Share
Welcome to week one of flower!!! This should get super interesting super quickly! With all the males pretty much weeded outta the room we got left with 9 plants that im 99,99% sure are female. I will be adding some nets in a few days after I ensure everyone in the room is female. Huge shout out to Hidden Vault Genetics for all their great work with genetics! Huge shouts also to @MarsHydroLED for making such great gear to grow with! MASSIVE shout outs go to all my followers and those who stop into the diary alike! Keep inspiring to grow! -The Projexx Day#1F Pictures N/A. Ladies are going to start displaying some growth now! Watered 3.5L each at 550PPM Day#2F Ladies are praying and starting to react to the light change. Day#3F Ladies are praying and changing , so far only 1 plant left im not sure what it is in terms of sex. Day#4F Pictures N/A. Organs on plants are getting more pronounced won't be long till where in full stretch. Watered ladies at 3.5L each at 550 PPM Day#5F Pictures N/A Ladies are starting to really pick up now! Day#6F Going to look to install the nets in a couple days just giving one plant a little more time to display sex before I lock the ladies into place.
Likes
4
Share
@Bobaloo
Follow
Lollipoped had some wind damage up top also, overall I’m learning a lot and wanting to keep learning more tomorrow I’m doing more ipm with captain jacks dead bug
Likes
44
Share
👉The time finally arrived for the harvest, mostly cloudy trichomes with scant few amber, very few white pistols, and the leaves had either faded or were fading. The run-off pH would quickly plummet and the run-off EC would spike. This may be an indicator that the plant is ready but that only would be conjecture on my part. The overall look of the plant to me said it was ready. The aroma was super strong citrusy and intoxicating. THe leaves were fading and there were virtually no white pistols. 👉I harvested bottom to top. I hung each cola on alphabetized clothes pins with gardening wire attached for hanging on the rack. The buds are dense and shaped like pine cones. I trimmed it semi-tight, but left some of the smaller frosty sugar leaves. The buds and sugar leaves are very frosty but it wasn’t as scissor freezing as the Gorrila Glue I grew last year. I measured the post trim wet weight on a self-calibrating digital scale. I checked the accuracy of the scale with a set of scale calibration weights and it was accurate at all weight ranges. I logged each colas trimmed wet weight and hung on the rack. I have a 42” tower fan. For first 12 hours I ran it at its medium setting, then reduced to lowest speed. I rotated the side facing the fan after 24hrs. Then after another 24 hrs I placed them in paper sacks with to top open. I left the buds on the clothes pin hanger and clipped the bag to that. After another 24 hours I closed the tops. Another 24 hrs and I test weighed a couple of colas. I monitored for another couple of days until the weights averaged 20-25% reduced from the initial wet weight. I then cataloged the weight of each cola and placed each into its own jar, most got one of those small cheap hygrometers. These hygrometers have been calibration tested and I know the drift of each. My target humidity is 62%. I would open the jars for brief periods of time during the next couple of days until the humidity stabilized at 62%. Once stable I placed 62% humidity packs in the jars. I took out most of the hygrometers for the next plants cure, but leave some of them with the best buds. The Queen cola was 20g when placed in the jar. That is about 24% remaining weight from trim. 24% is a little on the high side of the humidity target range. The jar the Queen cola is in, is a wide mouth counter jar and I will be toking that bud primarily and it will dry out the fastest. I have compensated the weight I entered on the dry weight spec to reflect about 20g more of humidity loss and another 30 for the stems that are left on the bigger buds. The final weight of the buds going into the jars was 254g (not including the larf at 23gdry). 200g of plump sticky pine cones for the final weight is pretty nice for a 1 gallon pot. 👉I wrote this review at 3 weeks before the 6 week cure mark. In my short experience of being weed rich, its been interesting to take note of how the flower continues to ‘cure’ as time goes on. I have found that 6 weeks isn’t a given for when its ‘cured’. I have observed that as weed ages it changes. I have not noticed much difference with 2-3 week old buds at 62% humidity when compared to 6 weeks from jarring. But I do notice significant difference around 6 months of age. The flavor is enhanced and the buzz is stronger. It maintains this level then 8-12 months it has leveled off and all strains are becoming more ‘couch lock’ inducing. My observations are not scientific by any means. This is just my 8th plant in the 2 years that cannabis became legal for home grow in my area. But I still have each of the plants and rotate which one I consume. 👉I loved growing this plant, and hopefully gained more knowledge. It fox-tailed a bit at the end. I think my frequent fertigation techniques contributed to most of the issues I had. I think I was a little too conservative with nutrient mix and irrigation volume and frequency. I used only 10% expanded clay pebbles in the coco mix as opposed to the standard 30%. This was slightly problematic at first before the roots filled the pot. Fertigation events would cause erosion and caution had to be taken around the seedling. I placed a layer of hyrdoton pebbles across the surface and the issue was solved. Once the pot was filled with roots it took 10+ minutes to give the plant 2L of solution. The pot was packed hard with roots. This may have been a contributing factor to some of the possible nutrient issues I had. I dont think the nutrient issues I saw had much impact on the final outcome. To get 200g from a 1 gallon pot is wonderful.
Likes
22
Share
@Prilyfe13
Follow
May 5, 2024 Day 15 This week we will be focusing on getting the plants into their 3 gallon containers. That should be happening this afternoon when I'm up for it, or tomorrow. However, some roots are starting to show on the sides and the plants are starting to get a bit big for the Germination Center. There's still a this one small plant. It seems to just be a smaller plant. I don't know if I'm going to keep it. Just a waste of soil I think. Speaking of Sour Diesel, all four plants are really healthy. The three normal sized ones are all the same size. Same everything. I can't wait to see how they come out. Still nothing to do with individual plants. They are still too young. I increased the light power to 100%. They all seem to be loving the light, so why not treat them. Plus they will only be in that light for another few hours to a day. Still no idea what the DLI is. I don't have a PAR map to to refer to. So it's mostly guess work. So I'm guessing by the look of the plants, they don't mind at all. The environment is still spot on. The temp is hovering around 77° and the humidity is still at 84%. I'm assuming the night temp is around 75°, but the light is on and the heat mat is going. When I plant them, I'm going to have to work the heat and humidity in the 2x2. Happily, this size tent is a pain to keep dry, and I don't need dry, I need humid at least for the next 2 weeks. Then they should be going in the 3x3 with the better light and more space. Perfect. Update: it's mid afternoon and all 4 babies have been planted in their final 3 gallon containers. Watered in and easy to go. I'm using a 100 watt light for now while I wait for the other plants to finish. Still deciding if I want to keep the small one or not. Germination Center Environment: Temp: 78.3° RH: 85.6% VPD: unknown May 6, 2024 So I measured all 4 plants today. 3 of the 4 are 4" flat with the final one being at 3". I already have her in the final container, but if she doesn't catch up soon, I may put her in the 2x2 tent for a solo grow so she doesn't get cannibalized. I have to wait though. I have plants that are days from harvest, so I'll have to wait a couple of weeks to get her in there. When that time comes, I'll separate her daily entries so everyone knows what's actually going on. I won't be basing the weekly stats on her though. She will be separate. I finally labelled each plant. A,B,C and D. You guessed it, D is the small one. I'll be doing daily entries for each once I start seeing more veg. Watering should be the same, lighting and environment will also be the same for A,B,C and different for D. So just a note for each plant daily. The light has been turned on in the 2x2 where these babies love for now. It's a 100 w Mars Hydro TS600. I don't really like using it, it's only 100 w. Which will be fine for the time being, but I prefer my better 3x3 240 watt AC Infinity light. DLI readings for this set up is just under 20 mol/m²/d. Should be good right there for the time spent in here. The environment is stable at 78% humidity and a temperature of 76°. I'll keep it that way for the rest of this week and see how things go next week. I'll most likely bring the humidity down to 60%. But I'd like to keep the temp up. I've read that Sour Diesel likes heat. Apparently it likes humid and dry climates. Which makes absolutely no sense to me, but whatever. I'll keep it at 60% in veg and then drop it 5% at a time until late flower and 40% will be the where it ends. Grow System Environment: Temp: 76° RH: 78% VPD: unknown May 7, 2024 I finally added a hydrometer that will read properly and works. All 4 ladies look great. I'm still concerned about the small one. I'm willing to bet, I'll end up placing it in the 2x2 for the solo grow I was talking about before. A,B,C all look the same. They are about 5" tall now and have 3 nodes. D on the other hand is just behind. Only 2 nodes and generally smaller. The light was a bit out of whack. It wasn't level and was pulling super hard to the back of the tent. I fixed that though. I think the DLI is around 20 mol/m²/d. It should be good for this stage. I'll definitely have to drop the light down t A bit when they get a little older. I'd like to see 25 mol/m²/d before going in the main tent. The environment is alright. The temp was a bit low this morning. The humidity was also at 61%. Definitely too low for these ladies. It should be up to 70% in a couple hours. The temp already bumped up to 78°. Now I just need to get a humidifier in there. Grow System Environment: Temp: 73.8° RH: 65.6% VPD: 1.01 kPa May 8, 2024 Watering day! So for the first full watering I gave everyone a half gallon of water PHed to 6.0 from the top. I use a stick, so it takes a good bit of time to do it, but I don't need to wait for the soil to absorb. It does so gradually as the water is added gradually. There seems to be 2 different phenomes. A and D are one with B and C being the other. A and D have fatter leaves, but they are a bit droopy. Not in a stressed out way. Maybe they needed a bit of water. Not sure, but they look the same besides the height difference. Speaking of D, I have officially decided to keep her and finish her in a solo 2x2 grow. I just need to wait a few weeks while the other 4 plants are harvested and dried up. In the mean time, I'll keep her in the 3x3 when it gets moved there. Maybe I'll keep her there if she can keep up with the rest. I'm not sure. It's honestly too early to tell. A, B and C are still all the same height with A being a slightly different structure. I'll check back later to see how they take to the watering. I don't think a half gallon of water in a 3.4 gallon container will be any problem. It will moisten the whole container to probably about 45% saturation. When the bottom feeding starts in a few weeks, the saturation should go up to 55%. And it should hang out here until the last week or so of the grow. It may spike a bit because the plants doesn't need that much water anymore, but we will cross that bridge when we get there. The light seems to be perfectly fine for these ladies. In a few days, I'll pull a DLI reading and see where it needs to be. I still feel like these babies are still establishing themselves. Anyway, for another day. The environment was really good for a while. Now that I have them out of the Germination Center, I needed to figure out the humidity. The solution is a small humidifier. Works perfectly. We have a temp of 77° and the humidity is around 79%. Perfect for this stage. It could stand to be a bit warmer, but this is fine. Plus it should get a bit warmer today after the watering. Science and all that. Grow System Environment: Temp: 74.5° RH: 71.5% VPD: 0.84 kPa Note: these numbers are daily averages including lights out. It gives a better idea of what both temps look like. For example. 74.5° is less than 77°, so the night temp much drop below 74° for a 6 hour average to drop the daily so much. But there's a lot to learn once you get the jist of it. May 9, 2024 Not a bad day. These ladies, even D, are looking great. Good leaf structure, fantastic color. Just all around some nice plants. They seem to really like the DLI. I'll be taking that reading tomorrow. The plants haven't grown enough to record it more than once a week. So lighting stays the same. The environment is fantastic. Right within range of not nearly perfect. The temp is around 76° and the Humidity is around 73%. It doesn't fluctuate much, but it still does. Naturally, I expect fluctuations, so I'm not worried about it. As I said, right within range. On the other hand, last night's temp dropped entirely way too low for this stage. I'll have to figure out a happy medium for my room heat and night time temps. Also, you can clearly see the drop in the leverage temp from yesterday. It's super low. Grow System Environment: Temp: 73.1° RH: 77.5% VPD: 0.66 kPa May 10, 2024 Not much going on today. No watering needed. The light looks perfectly fine. Also, the plants are each started to grow at their own pace and size. While A,B and C are the same height, B is slightly ahead of the others. Strong stem and starting to grow side branches and another node. D looks like she may catch up after all. She's still not as big as the others, but the slight difference looks like it will either work itself out in veg, or I will just let her get bigger during the stretch with less training. I don't think I'm going to use a SCroG net this run. I plan on ordering silica to improve stem strength. I think a SCroG net works better in larger setups when you have multiple plants. My tent is just too small to work 4 plants in a SCroG setup. I can only access the front of the tent and the back and sides get neglected. So training and silica it is. As I said above, no watering needed today. However, I did reactivate the wick system for Tropicana Cookies today. She was drying out fairly quickly, so hopefully with the dryer container, it takes more time for the bottom to saturate. The lighting is staying the same. I'll check it at the beginning of next week. Although, with a tent this size and lack of space for the light, I'd just assume let the plants grow into it. Maybe I'll drop it to 24" when I see 4 nodes on all plants. The environment looks great! Cooler at night and nice and warm during lights on. The day temp is about 77° with a humidity of 66%. The night temp is 67° with a humidity of 78%. The humidity is a bit high, but I don't have an automated exhaust system like I do in the 3x3. I may turn the the exhaust on before I go to bed, but then the morning time will be dry before I wake up. Only for 2 hours, but still. The fluctuation is definitely not welcome. Grow System Environment: Temp: 74.1° RH: 73.6% VPD: 0.78 kPa The VPD is a bit low. But that's due to the night time environment which I'll be adjusting tonight. May 11, 2024 Last day of the week for these 4. They have grown significantly over this week. Excellent leaf growth, beautiful green. All 4 plants look fantastic. Perfect structures. I can't ask for better. D is still a bit smaller, but is catching up. I don't expect her to stay small forever. I believe she will grow the same size at the end of the flowering stretch. B seems to be the largest, or most advanced, of the bunch. She is definitely ahead by a node, and a bit taller than the rest. However, her stem is a bit shorter than the rest. A and C both have longer stems, but lacking the robust growth of B. A and C are about the same. Nearly identical. These could be the same phenotype. With B and D being separate phenotypes. This coming week, I'll start reporting on the plants individually. It's a bit more work, but much more organized and easier to read. The light is definitely where it needs to be. I'll check DLI tomorrow. The environment is still near perfect. However, it was a bit low this morning. Apparently I didn't set the heat high enough. It's fixed now. The temp is around 77° and the humidity at 70%. No watering today. The pots are still fairly heavy. I think I'll water again tomorrow or test to see how moist the soil is. If I water tomorrow, I think it will only be a quarter gallon. Everything looks good and that's all there is to report today. Grow System Environment: Temp: 72.6° RH: 72.3% VPD: 0.79 kPa
Likes
11
Share
@tangie
Follow
Chopped her two days into week 14. What else. Buds. There are a lot of them. And they are quite large. And they look like they will require little effort to trim. What more can I wish for? I am a very happy man. Upd 1: Trimming is SO SIMPLE! Not much sticking out to begin with, because of the amazing bud structure and me plucking most bud node fans. Solid nugs which are not bothered by anything, so pulling smaller sub-bud fans is very simple too, while the buds are what I would call moist. I'll call this Moist Trim 😄 ✂️✂️✂️ Went for the best trimming tools available on the market (well at least my research concluded so) and LOVING every minute of trimming with the B-500SRF. Why would I or anyone else use something less suitable or less comfortable for such a delicate and long job is beyond me, except if you cannot afford one right now, in which case I wish you to experience it one day. Fiskars are also very good in therms of the blades, coating and cutting ability and precision, but the spring is just too stiff, like way, way to stiff for something that is to be used for hours on end. One might argue that such spring force helps overcome resin buildup, but please just rinse your instrument regularly in an appropriate solvent (ethy, iso, whatever — consider you instrument materials as well) and wipe it after. Why would you let significant amounts of resin to accumulate on such a gentle and precise tool? Kinda defeats the purpose?
Likes
24
Share
The Apple Betty babies are doing great 😊 I’m very pleased with the results so far, I just wished I would have known they would have such a large stretch, they D almost doubled in size in 14 days. At day 8 I stopped tucking the branches and allowed them to grow up. In hindsight, I probably should have kept going for another couple of days. They continued to stretch rapidly all the way up to date 12 or so, much more than my other strain that I have going as well. At day 10 I cleaned up some of the small bud sites and leaves that were below the 1st trellis. These sites do not get enough light to make anything good, and take away energy from the main tops as they grow and compete. A quick snip here and there will really help the end result. At day 13 I decided to add a second trellis net to provide support to the tops that came up so fast. They seem to have stopped their main stretch faze, and are looking happy and healthy now. I’ve continued my water, water, feed schedule and have not seen any cause for concern. The girls are taking a little over a gallon of water every 72 hours at this point. Humidity is being controlled automatically with my in-line fan and humidifier. RH is set to 57% and temps hover between 77-80 degrees with lights on, and about 70-72 with light off thanks to my furnace being back on for the cooler temps. The 2x4 5 gallon girl is doing great as well. 😊During the stretch, she flourished just as the girls in my big tent did as well. She is going to have some great bud, the branch structure is nicely developed with tight node spacing and large tops. I’ve been plucking off all the lower growth, and tucking leaves as they block bud sites. I will be doing a defoliation next week. Happy Gardening 🇨🇦👊❤️
Likes
2
Share
@EtnoGrow
Follow
well everything is going well without pests without at least not noticeable or minimal deficiencies surely, which leaves us calm, potassium soap and neem oil were purchased but it was not applied at the end, it will be the next one, after this pruning work a new one was installed scrog mesh and as you can see we also did with some or one at least the 2nd largest an attempt at sog, so it's like a mixture, then this big ugly mesh, we change it for an ideal girl what we want is that it doesn't grow too much in that The mesh helps us, well, we also change and go to flowering officially when we see that the plant is already flowering by itself, we spread a little so that the small 5 small pots grow a little more, the intensive pruning is to compensate for the ventilation that The temperatures may still be somewhat high, the air circulation in general, my closet is 60x60x160cm, so it comes in handy, it seems to me that we have carried out a good sativa plant by taming it in such a small space and it is I am proud, in addition to having the other copies as well, I hope I have taken advantage of the space and the light as best as possible, that was the idea.
Likes
14
Share
@Canna96
Follow
This week went well for the Durban Nights. Not much to report, she hit day 14 today and is working on her 3rd node, I will transplant her in 48 hours, then hopefully top her in about a week or less. I will wait for her to grow at least 7 nodes so I am sure her roots are solid before the topping, but she will absolutely explode after transplanted into coco coir so that shouldnt be a problem. I will also complete the first two sets of toppings at the 3rd node, so that should shave a little time off as well as I previously completed the 2nd and 3rd toppings at the 5th and 3rd node to further spread out the plant. Super excited for this strain as it is a cross of Durban Thai and Jack Herer which are two of my favorite Sative Strains. I hope everyone has a safe weekend. Thanks for stopping by, Stay Safe and Blaze On!!! 💪 Website: https://medicgrow.com/ https://growdiaries.com/grower/medicgrowled
Likes
10
Share
@Jd1971
Follow
Tea once a week going nice;))))))
Likes
1
Share
We are trying to survive the heat wave we have here at the moment. Hopefully an extra dose of silicone will aid a bit... Both plants look very well. The mainlined plant is slightly taller at 58 cm, while plant 1 measures 54 cm.
Likes
18
Share
@Hashy
Follow
Week 7 Light cycle=12/12 Light Power=196w Extractor controller settings High temp= 25c Low temp= c Temp step=0c High Rh= 56% Low Rh= % Rh step=0% Speed max=10 Speed min=2 Fri 2/2/24 #3 (Day 43)(Day 5 flower) 📋 raised camera, nearly touching the roof. Sat 3/2/24 #3 (Day 44)(Day 6 flower) 📋 Defoliate a lot of lower leaves. Sun 4/2/24 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= automatic Feed=bloom nutes. Neutralise=0.1ml/L Silicon=1.0ml/L Calmag=1.0ml/L Terra Bloom=4.0ml/L Sumo Boost=1.0ml/L Roots=0.2ml/L Easy Ph down=0.115ml/L Ec=1.9 PH=6.1/6.5 Time start=12.00pm Finish time=13.45pm (11×5 minute runs with 5 minute gaps) Total flow rate=190ml/min Flow rate per plant=47ml/min. Total volume made=13L Total volume left=2.5L Total volume used=10.5L Volume per plant=2.62L (Est) Runoff. Total runoff=1.75L Ec=2.4PH=5.9/6.2 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 #3 (Day 45)(Day 7 flower) 📋 Mon 5/2/24 #3 (Day 46)(Day 8 flower) 📋 H=49cm D=50cm DLI=33.0 Raised the pot a little. H=49cm D=43cm DLI=35.5 Tue 6/2/24 #3 (Day 47)(Day 9 flower) 📋 Looks like the weather is turning cold again over the next few days. Wed 7/2/24 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= automatic Feed=water Neutralise=0.1ml/L Roots=0.2ml/L Easy Ph down=0.ml/L Ec=0.2 PH=6.6/6.5 Time start=12.00pm Finish time=13.45pm (11×5 minute runs with 5 minute gaps) Total flow rate=190ml/min Flow rate per plant=47ml/min. Total volume made=13L Total volume left=2.5L Total volume used=10.5L Volume per plant=2.6L (Est) Runoff. Total runoff=1.5L Ec=1.74 PH=6.6/ 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 #3 (Day 48)(Day 10 flower) 📋 H=53cm D=39cm DLI=42.0 Thur 8/2/24 #3 (Day 49)(Day 11 flower) 📋 H=55cm D=37cm DLI=45.0 Raised light 5cm. Lowered power from 200w to 180w H=55cm D=42cm DLI=37.0 This one is progressing OK. A little bit smaller then the others in the tent by about 20cm. She has lost the battle for space and is the runt of the grow at this moment in time. Back soon. Take it easy.
Likes
26
Share
Así van las niñas 42 días de vida todas están drenando de EC 1,2-1,4 y pH 6,5-7,0 Así como vamos. 2 quedarán de color 🍇
Likes
23
Share
This has been another great week ! We are at day 36 end of week 4 and these ladies are getting nice and bushy! Still using the same dose nutrients just a little less rapid start at 1/2tsp per gal now PH at 6.5 still. The plants have now grown into 600 par an should start flowering this week!! Can’t wait to see what these ladies do this week😍😍 Stay Tuned Cheers an Happy HALLOWEEN 🎃 👻🔪
Likes
6
Share
Cookies N Cream Clone one from Zombie66 Clone two from ATMBKK