Hi, everyone 👋 a few days ago I was given a TS1000 lamp by Mars Hydro for grow purposes....this is the perfect opportunity to make and test a Bubble Bucket. I never had one and always wanted to try one out 😎 i had half the stuff needed to build a Bubbler and at this point i"m only lacking a exhaust fan with filter. As the TS1000 from Mars Hydro brings a powerful 150 Watt on board and 2,3umol/J 💪💪💪 I plan to start with two plants, but because my excellent Mars Hydro grow tent is a 60 x 60 cm (2'x2') I am not able to fit in two Bubblers... so i decided to grow the Amnesia CBD Auto by Dinafem in a bubbler and Blue Cheese Auto(when its sprouts :) in traditional method in soil (for comparison reasons). If the DWC will work really well and there only place for one plant i will move the Blue Cheese Auto to a different tent... if not they will grow together. As the Dinafem seed bank is no longer there the seeds i got are a couple years old and i used 4 seeds to sprout one seedling of Amnesia CBD Auto. Let's start of this babies and see them flourish under the my new awesome Mars Hydro TS1000 lamp. All the best to my fellow grower, keep it growing friends 💪😍

June 26, day 98, the Euforia is in it's final ripening phase, and will be harvested soon! I am dialing down the EC, although I do not do any major pre harvest flushes. June 28, day 100, emergency harvest time! I was going to push it another 3-5 days, but when I was examining my fattest cola I noticed the physical manifestation of my nightmares: early stage bud rot. I should have harvested days ago in hindsight, as days of rain pushed my RH up into the mid-high 60s. I only noticed it because I was bending bud tissue away from the stem, but there was clearly some white fluffy buildup around the base of a dead leaf stem. The good news is that I caught it very early, no bud tissue has died anywhere on the plant and what mold I could find was still white and fluffy. I had to immediately cut down the whole plant as a result. I cut away bud material around the few moldy spots, and put the rest of the buds from those colas into my pile for edibles/oils. 95 percent of the colas seem totally unaffected. Nevertheless, I have had to totally switch up my dry/cure technique by doing a wet trim of the large buds and a quick dry/cure to start to make sure no spores can spread elsewhere. My priority is really saving what has been accomplished so far. The good news is that early wet weights are very heavy, even with the bit of bud removal. 600g wet for the top colas, another 350g wet for the mid grade buds, and finally 1000g for the low grade buds left of stems for slower drying. This means I will hopefully end up with 200g+ dry bud for vaping and smoking, and much more for edibles, rosin, etc. I will have more details next week with the full harvest update!

Alcanzando un buen tamaño las plantas,realizare poda apical a las mas avanzadas esta semana,todos los parametros controlados en eel cultivo

✌️🎃Thank you for checking my cultivation.

Week has been good. I'm not sure about the ppm and salt around roots, they are a little brown. Wounder if I should flush them and start again with nutrient? And see some of the last picture, it's pretty thigth between the leaf and buds, should I but some of the leaf? Ppm 1400-1600 Temp 22 to 31 Temp in water 20-26 Humidity 50-60%

If you are lonely when you are alone, then you are in bad company. Bee pollen is considered a “vitamin bomb” due to the presence of almost all vitamins with an average of 0.02–0.7% of its total content, with a higher amount of water-soluble than fat-soluble vitamins. Bee pollen contains vitamins A, D, E, B1, B2, B6, and C. It also provides minerals such as calcium, magnesium, phosphorus, potassium, zinc, copper, manganese, iron, and selenium, I mixed a bunch of that with some honey and RAW cane molasses to make a nice big bucket of tea. A family friend who is a beekeeper was kind enough to share some honey. The nutritional content of raw honey is impressive and includes high levels of protein, amino acids, B vitamins, calcium, manganese, potassium, magnesium, zinc, and iron, as well as various polyphenolic antioxidants. I am loading up nature's finest sugars, and sweet things, Honey & Mollases. UV-B-induced DNA damage (CPDs and 6–4 PPs) can be repaired efficiently by photolyases. Pyrimidine dimers can be repaired by nucleotide excision repair (NER), or bypassed by replicative polymerases (Britt 2004). The expression of the CPD photolyase (PHR) gene is induced by UV-B light dependent on UVR8 signaling pathway, and is also induced by blue and UV-A light (Li et al. 2015) https://link.springer.com/article/10.1007/s44154-022-00076-9?fromPaywallRec=true Old but gold. The camera picks up far more light than there is during the night cycle, camera is showing bright pink violet collages but my eyes barely see a thing, about 0.25ppfd in that tent overnight. Have been tweaking the spectrum of moonlight/intensity and watching the responses overnight. Tweak, tweak, tweak all week. PAR is 400-700nm, Overnight UVA in the tent is all 365nm and 385nm, so the meter only picks up a fraction of the light curve that makes it photosynthetically active past 400nm. Of the light in the tent, 0.25ppfd is from UVA Looks like It makes them 🕺 🕺 💃 all night. Better flower soon or ill be screwed for space, they are stretching, but is it "the stretch"? She has fire in her belly. Growing crops with insufficient light (i.e., below “optimal,” as defined here) limits the yield potential, which in turn wastes the other production inputs including labour, water, nutrients and electricity. As lighting fixture is one of the most expensive investment of the production, what is the relationship between light intensity and yield? Potter and Duncombe (2012) grew cannabis plants with varying canopy-level PPFDs during the flowering stage and found that increasing PPFD from 400 to 900 μmol·m−2·s−1 increased yield an average of 1.3 times higher, across seven cultivars, with no light intensity treatment effects on floral cannabinoid concentrations. Vanhove et al. (2011) found that cannabis yields were 1.3 to 3.1 times higher (depending on cultivar) when plants were grown under approximately 1000 μmol·m−2·s−1 compared to approximately 450 μmol·m−2·s−1 during the flowering stage.It was predicted that cannabis yield would exhibit a saturating response to increasing Light intensity, thereby signifying an optimum light intensity range for indoor cannabis production. However, a new research from Morrison (2021), after 81 days‘ experiment, found that When plants grew under LI ranging from 1200 to 1800 μmol·m–2·s–1 provided by light emitting diodes (LEDs), inflorescence yield increased linearly as LI increased up to 1800 μmol·m–2·s–1. "Cannabis will not stop flowering if the lights are turned on for a few minutes once or twice during the 2-month-long flowering cycle. If a light is turned on for 5 to 30 minutes—long enough to disrupt the dark period—on 3 to 5 con­secutive nights, plants will start to revert to vegetative growth." "Less than one half of one foot-candle of light (0.1ppfd) from sunlight will prevent cannabis from flow­ering. That is a little more light than is reflected by a full moon on a clear night. Well-bred indica-dominant plants will revert within three days. Sativa-dominant plants take four to five days to revert to vegetative growth. Once they start to revegetate, it can take from four to six ad­ditional weeks to induce flowering again!" Guess ill find out my answer soon.

Well it’s the beginning of week three of flower for my girls. They look and smell magnificent. They all have flowers and the pistoles are bright white. I need to defoliate them again I think. And I was advised I should remove all the lower flowers, all the ones hiding and not getting much light. Will it be ok to just let them grow and just keep removing the larger fan leaves that clog up light getting to the lower parts of the canopy? Regardless of stem size currently my branches each have 5 or more flowers on them. Will the returns from taking away those lower flowers be worth it to the tops ? Will trimming flowers off my girls at this stage in their life hurt them? I feel like I should let them be and just pull the leaves that clog up light dispersion. I need to feed them this week. I really think the girl a like the emerald harvest nutrients, I had followed their portion chart up till the slight burn then cut back on the scale a bit. Instead of feeding for six plant I’ve been feeding for four with the same amount of water. I’m very happy and excited for this grow, this has been quite the learning experience for me. I hope everyone’s grows are goin well and wish you all a great harvest.. Oct 19. Heavy defoliation and small flowers pulled from all of the girls. Hopefully they dont take it hard and recover well. I should be able to let them go and not worry too much about smaller flowers taking away from bigger ones now. My hands smell amazing. I hope these girls turn out best as they can now.

She’s getting their! She’s starting to show signs of finishing and I’ve already given her a bit of a flowering nute boost, but she will be going in to flush once I get about 10/15 amber and the rest as milky as I can get. Still waiting for some pistils to turn orange or curl but that’s okay. I’ve got time. 🍭

Hello, J’ai commencé le rinçage des plantes mercredi, il reste une bonne semaine pour la Runtz (odeur bonbon, trychomes opaque, bien collante) et à voir si je laisse un 1 semaine de plus la Frozen ou pas (car pistil encore trop de pistils blancs à mon goût )

As you can see we are close to the harvest, we are wondering if is better to do first the critical and then the rest or if we better take off all the flowers togheter maybe over keeping the critical

Hello evrybody!!!!!! I m happy guys, these scrog got out of my hands, the net is fullfilled, every branch is ending on the top (as u can see on the first photo) with new gems spreading out and the photo is taken in the first day of flowering so them will stretch up. The only negative side is that it's not easy to defoliate the plants behind. I m excited cause is the first time i have this results and the grow room is so filled up. we'll see what happens next days and weeks, but it seems to be a great cicle!!!!! ps i will upload better photos next days, for today i just had those

En la 6ta semana de vegetación hicimos una poda de bajos y desfoliación en general para potenciar el crecimiento de los brotes superiores, mejorando la iluminación y ventilación en el cultivo. También hicimos unos cuantos amarres (lst).

🤗 Hi fellow growers. We are back here to harvest the Northern Lights Auto from Seedsman. She took 11 weeks to finish flower and a total of 15 weeks from seed to harvest. 🌱Growing her was a little tricky as she was finicky at the beginning of flower. She wasn't the fastest auto but she put on some tall colas with some fair amount of resin smelling of sour stone fruit such as a plum. Chopped her down then dryed for 14 days in a environment controlled room. Then began the trimming process. After a nice manicure the plum smelling buds were then placed in a jar to set cure for 30 days. There was quite a bit of larf nugs on the bottom skirts that I should have trimmed off during the flowering cycle but sometimes I like keeping them to press into some rosin before my nugs are cured. I find that pressing the flowers with in the first week of the curing process produces the best quality flower rosin In the end I'm left with a gram and a half of some beautiful Northern Lights flower rosin that tastes and smells like a sour plum and packs a big punch. About a 10% return so not the greatest yield but it sure is some high quality rosin. Keep it mind it was the larf flower and I press at 180°F to preserve as much flavor as I can. I'm after quality and have been achieving that. Effects - Relaxing, calming, Happy Yield - 68 g nice nuggets 14 g of larf that went to rosin Smell - Sour plum Forrest Taste - Skunky plums

TROPICANA COOKIES 🍪 FF/FASTBUDS WEEK#13 OVERALL WEEK #5 FLOWER This week all good she's looking great buds are getting dense and she's covered in trichomes and she a beautiful looking plant!! 😍 Stay Growing!! Thank you for stopping by and taking a look it's much appreciated!! Thank you FASTBUDS!! FASTBUDS/TROPICANA COOKIES 🍪 FF

Here we are at the halfway point, after the first month our photoperiodic plants are multiplying their florets and then going into flowering. Slurricane is a lady with low internodal distance. This characteristic greatly influences the application of growing techniques. In this case it is a plant that responds to topping a little slower than the others and it is best to wait for the branches to grow to avoid damaging the little ones. However, we are at 4 florets and between tomorrow and the day after tomorrow we will cut 8. My plan for photoperiodic plants is to get to 16, wait a few days and go into flowering. 16 florets as I see it is the perfect size for the 11 liter pot. Topping is an extremely delicate moment as regards cutting the tops to split them, we always pay attention not to damage the new growing branches. Topping is also a delicate moment as regards fertilization because the plant slows down and absolutely does not need all that nitrogen that it would normally need and that the producers recommend in their sheets. So you should arrive with the plant green and perfectly in shape at this moment and dose the fertilizer very well for growth. Mine came from a slightly deficient veg because I kept it low fearing this over effect during the topping that I know well and now I am a bit over. Nothing to worry about, of course, but if you do repeated topping, my advice is to use preferred soil or prepare the soil with Monster Bud Mix by Zamnesia or Plagron Super Mix, in short, enrich the soil at the start and only add nitrogen if necessary, especially during repeated topping. In any case, everything is under control and I will demonstrate it to you during the flowering phase. Wait for the Uncle BreadandBuds and see what it does to you. Remember that cold temperatures make the girls absorb food much more slowly than in summer, so be careful to give the right amount and let the plant dry in maximum 2 days or you risk imbalances. We are always using soil, feeding and all the recommended additives from Plagron 100& organic, we have only lowered the amount of grow in this topping phase for the reasons mentioned above. ---- Decide on the right soil and calculate your fertilizer sheet based on the soil on the official website. -- www.plagron.com Try a seed of this strain that drives us crazy...It's a super News! ---- https://www.zamnesia.io/it/11177-zamnesia-seeds-slurricane.html Zamnesia Description // Do you want to add a prestigious genetics to your grow room? Slurricane is a premium US strain created by In House Genetics and now available to growers thanks to the breeding processes implemented by Zamnesia. Born from the fusion of Purple Punch and Do-Si-Dos, Slurricane is 60% indica and incredibly vigorous. Whether grown indoors, outdoors or in a greenhouse, this strain can produce large quantities of dense and aromatic buds. Add Slurricane to your assortment and enjoy growing one of the most beloved hybrids in the United States. All the best that mother nature can offer is on ---- www.zamnesia.com

Harvested Shiva Skunk, Zombie Kush and Sweet Love.

Buds are fattening up nicely. Red hairs are starting to come in on some of the buds. Overall, looking very frosty and healthy. It's a little mind blowing that this grow - which seemed so slow to start has gone into overdrive.

The last week of vegetation is already ending. Starting from day 57, I switched to a 12/12 hour light regimen.

Picked up some rhizotonic and had the fan on the past few days and all is looking well! They have been rotated as they started leaning towards the light and bending in one direction..My last veg light was 200/250w blue CFL however didn't notice at the shop I got a 125w I will pick up a bigger veg light for a slightly higher warmth and a bit more light coverage. Using the canna Coco range nothing else.

A new week for the lady starr fedding her with high p nutrient