11/9: I took some photos and added a 35w 3500k LED to the top section and have it pointed towards the backside of one of them and my little Stardawggy. 11/10: Today, I super-cropped about 10 different mains and branches on various plants. The canopy is now much more even. They'll be ready for a feeding tomorrow. 11/11: I fed them all about 1/3 gallon each with big bloom, tiger bloom, beastie bloomz, cal-mag, bembe, humic acid concentrate, myco/tricho, signal, and a little grow big. 11/12: I spent a couple of hours tying down branches and tucking leaves to get more light down into some of the plants, and rotated the edge plants. 11/13: I rotated the edge plants and added a TNB Naturals CO2 enhancer to the closet. I raised the thermostat on the ac infinity to 86f, so as not to exhaust it all, but with the cold air intake, it's rarely even coming on anyway.👍 11/14: Their buds are swelling up nicely! I fed them again today because I'm still seeing some signs of potassium and phosphorus deficiencies. I went 1/2 strength with the grow big, but full strength with everything else... 11/15: Last day of week 6 and I'm happy with their progress. I plucked off the dead shit and tried to reposition some of the lower branches to get more light. Took some photos and shot some budporn video..sexy ladies!😍

Week 2 the girls are loving life and showing signs of flower

These are the Epic Genetics Strains, we have some problem on the begging many mutants and seeds that don't came out, but we get to safe 1 epical widow and 1 Spigol Field, the second Widow on the pictures is the one how after let grow the second leaves, stop to grow up and separate in two for alone, bit know is getting the flowers directly for the stock, crazy because they smeñl fantastic and are complete frosty but they will not become to big.

Flushing

I defoliated a lot of the under canopy today so I could move the scrog net upwards. These girls just had to stretch and stretch their legs. And, yes, the smell on my fingers after handling them was intensely citrus. I only gave them a little water this week as the air has been very moist and the soil has been damp enough.

We’re getting closer, they’ve upped their water intake this week, so I’m thinking we’re on pretty much the last push now! Absolutely stinks of pineapples in there, with a gassy undertone. I’m excited to see how these finish up!! Hopefully not too much longer now.

I forgot to turn on the ventilation fan. But, fortunately, my children did not die.

She rocketed up! Given her some LST to stretch her out and topped her one last time just before. Will be flipping in the next week or so, she’s got big internodal spacing, so this has helped her gain some more veg on her. Nothing fed other than a compost tea - the soil is doing totally fine without anything more added in yet.

5.12. - Entering final week before harvest. One plant was flushed last week and other two will be flushed this week. Already seeing some amber trichomes on two of the plants. 6.12. - Flushed the other two plants and watered the one already flushed. Amber trichomes are more present each day and one of the plants is just a few days from harvesting. 10.12. - Today is the last day with light. I'll give them about 3 days of darkness and then proceed to harvest. 11.12. - First day of darkness. They look amazing with the flash, smell is very nice. 5.12. - 11.12.2023

Muy buena cepa, potente, productora y fácil de cultivar. El efecto fue exactamente lo que buscaba; intenté curar la yerba lo mejor que pude para poder preservar los terpenos y así disfrutar aún más. Cepa recomendada😄

Piante spettacolari con grosse teste!!! Odore incredibile e resina gommosa e appiccicosa perfetta per estratti!!! Grazie a tutti per il supporto e a @Barneys per la collaborazione ne vedremo delle belle!!!! ❤️🔥🌲

Holy moly. She's growing... like a weed. She's loving the nutrient schedule and environment (finally). I was having an issue maintaining proper humidity levels and after exhausting EVERY possibility with venting, fans and otherwise, I have moved my dehumidifier inside the tent and it's working wonders. I drain the water with a shop-vac as I do the same for my run-off. Things are going great so far, I hope to continue this forward progress in the coming weeks. Going to LST sometime this week, just not sure when. 6/13: Started minor LST phase to open spots to light. Fan leaves are gonna be huge. I also overwatered her... I'm a noob. 6/14: No watering for 24 hours. I removed my LST. She wasn't yet strong enough for the arc I put into her. Another noob mistake and add the overwatering to this, I just wanted to destress her. 6/15: Back to regular 1 liter per 24 hours, also added Armor Si to the nute schedule. 6/16: She's showing signs of getting back to normal. Added Diamond Nectar on this day. I also LST'd her back to position. 6/18: Back to normal. I trimmed 1 fan leaf under the canopy that wasn't going to get any light. 6/19: She's better and growing well. I'm going to try and keep this vegetation stage a little longer. Added a little more water today, just a tiny bit. I have 2 other plants that are a week behind and I want them caught up for the flip as close as possible. Pray for me.

@twenty20mendocino Ateam R&D Update! This week went pretty great! The 4 photoperiods got their tops and bounced back real nicely! They will be getting topped again a couple more times but will give that another day , let’s take it day by day! The Sangria Auto is looking real nice, got her preflower going on an we just started her on flower feed on her an she is just lovin it at day 33 for all! Hope you all enjoy an have an amazing productive day! Cheers y’all 😶‍🌫️💨💨💨💨🤙🏻

30.05. - 05.06. (DD.MM.) Because the seeds were eaten by fungus gnat larvae in the first two attempts, in which I placed the seeds in a large pot immediately after germination, I first grew the seeds in a smaller pot (approx. 10 cm in diameter) for this third attempt. Because of the fungus gnat larvae, i poured boiling water over my soil before planting and then covered it with aluminum foil until it was cold. That way I was able to kill all the larvae. I put the plant in my self-made growbox (50 x 50 x 120cm) after about 5 days. The plant was under a planting bell and was watered with 10ml of water on the 7th day after planting.

https://youtu.be/lVaNgmF8Gds

DID SOME MAJOR DEFOLIATION TO SLOW THE GROWTH ABIT. IM GOING TO PUT THE 15 PHOTOPERIODS IN THE 8X8 TENT TO FLOWER BUT I NEED TO HARVEST THE AUTOFLOWERS FIRST. FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

This week I Supercrop all the plants and spred them out over both lights. One more week of Veg and they are ready to explode Check me out on Instagram @growmorestressless

Day in and exit fan 15 min off 15 min on Van is full on Night in and exit fan 30 min off 15 min on Van is full on

Welcome back to yet another short update☺️ Transplanted and filled with tender care and love 🤗 A bit colder temperatures then inside the veg tent , but I’m not worried at all🤩 Videos show the process, hope you enjoy 💯💚 See you next week🤩 ------------------------------------------------------------------------------------------ Light source: Medicgrow SpectrumX 880W LED Build in PPFD 4 controllable spectrums V1, F1, VS, FS Visit https://medicgrow.com/ for more informaton. Light measurement: Apogee MQ-610 & Apogee DLI-600. Fertiliser: Organics Nutrients https://www.organicsnutrients.com/en/ Green Buzz Nutrients Discount Code: GD42025 Grants 25% with a minimum Order value at 75 Euro. https://greenbuzzliquids.com/en/shop/

Les sites de bourgeons commence a ce développer, défoliation cette semaine pour optimiser les branches. La fréquence nutrionnel 1fois sur 2. Le ph est contrôler, niveau EC au drainage contrôler. Merci a toute l'équipe @Dutch Passion bravo. 👏🏽☝️