the photos are all of NL#1 because that plant has all of the attention. it got transplanted, i know "dont transplant an auto".. kill me for it. anyway.. that was a HORRIBLE!!!! Experience and I HIGHLY RECOMMEND not doing this if you have no clue what you are doing. I almost lost a Plant... why was i transplanting in the first place? well first of all as a new grower what did i do? I over Fed the plants 😆.. and they were not happy. i tried flushing but that made it worse so i needed to add new soil to hopefully dilute some of the nutes. The transplant from a 5 gallon bucket was not and will never be a task for one person to do alone. some roots got ripped she got banged around a but then the entire plant went droopy and it was like hell trying to get it to stand again. NL#2 is doing okay just a flush and it is doing fine i hope.

Even though I made some big (rookie) mistakes, she's really forgiving and with the right care I'm sure she can grow out to be a proper monster. No bugs, mold, mildew or anything that was a reason for panic. I started flushing too soon and completely stopped her growth, a wise lesson. Because she was harvested a little too soon there is more of a head high instead of a body stone and depending on my mood I like it that way. She's supposed to be a heavy hitter but because of the early harvest she's a good companion during the day and will actually allow you to have a normal, fun conversation. So in conclusion, i'm pretty happy with 127 grams of harvest for a first proper grow using a self made 200W LED growlight and DWC setup. More plants will be grown, thats for sure. Thanks for reading and feel free to leave a comment! Happy growing, Danger.M

Greetings fellow growers 🖖 and welcome to my first grow ever. This adventure actually started several months ago when I decided to stop buying flower from dispensaries and just grow my own bud. How hard can it be!? This is actually my second seed of this strain. The first bean sadly died due to over watering (sorry girl, RIP). I was literally watering the cube to the point where water was dripping from the bottom, then heavily sprayed the humidity dome and tray with the vents completely closed. Everyday. Multiple times. I never let the dome or try dry out. So after about 8 days of not sprouting, there was a funky smell of rot. So that was that. Later I learned that rockwool retains a lot of water and can easily drown seeds. So a wet/dry cycle is best for rockwool germination. So even after hours of researching and digging through forums and tutorial videos, I was still under prepared for this journey. Did not consider how delicate the germination phase is. Oh well. Lesson learned. Reset and try again! I hope everyone is safe and stoned during this corona crisis. Just like everyone else in the world, I want this pandemic to be over with. But in the meantime, let's grow some weed! 🖖 [START OF WEEK 01] Day 01 - Monday - 08/03/20 - Total Days: 001 ----------------------------------- - [0830]: Light Schedule: 24Hrs/0 --- Soaked cube in 5.5 PH water for 10 min. Did not shake water out. --- NO NUTES! Only PH'd down to control the PH levels. --- Did not use the default hole (way too deep). --- Flipped cube upside down and made a shallow hole for the seed (less than 0.25" deep). --- Placed seed in and pinched hole close. No additional water added. --- Sprayed the tray and dome with straight water (5.5 PH). --- Vents are cracked opened a for ventilation (about 1/4 opened each). --- Distance between the light and tray was 53" --- AC was set to 80 °F --- Exhaust fan was set to 86 °F --- Room average temp was at 85 °F --- Dome humidity was at 85-99% when sprayed. --- Allowing to completely dry before respraying. - [2200]: Dome and tray were completely dry! Sprayed only tray and dome with more water. Day 02 - Tuesday - 08/04/20 - Total Days: 002 ----------------------------------- - [0845]: Sprayed dome and tray in the morning. Everything was dry. --- Hoping for the best! - [2130]: Everything was dry again, so sprayed dome and tray at night along with a light spray on the cube. Day 03 - Wednesday - 08/05/20 - Total Days: 003 ----------------------------------- - [0830]: Everything was dry again. Resprayed dome and tray. Slightly sprayed cube. - [2125]: Hooo damn!! She popped! Am little stub is visible! Resprayed dome and tray again. --- Still going 24/0 for lights. - [+0033]: Just checked up on her and I swear she grew a bit taller! Getting excited! Day 04 - Thursday - 08/06/20 - Total Days: 004 ----------------------------------- - [0845]: Wow! Went from a little stub to fully sprouted overnight! Everything was pretty dry again so resprayed dome and tray. - [2200]: Tap root is visible! Over 1" long too! Just resprayed dome and tray again. -- Going to prep for hydroton transplant tomorrow! Day 05 - Friday - 08/07/20 - Total Days: 005 ----------------------------------- - [0930]: She keeps growing! -- Added a bit of CalMag to the spray bottle (8 drops to 650ml of distilled water). Resprayed dome and tray. Water was at a 5.4 PH with 141 PPM. - [1045]: Prepped the bubble bucket with 4.5gal of water. Water is high enough to reach about 0.25" above the bottom of the net pot. --- Added 3 drops of Superthrive --- Added 3.5ml of CaliMagic --- Added 2ml Hydroguard --- Then PH'd down to 5.6 --- Solution Strengh: 120 PPM --- Water chiller is set to 20 °C - [1100]: Transplant time! --- Filled the net basket 1/3 with hydroton. When placed in the bucket, air bubbles are not visible, but are slightly below the surface (slight digging will reveal the water/bubbles below). --- Removed plastic on rockwool cube and placed in basket, then filled around and covered with hydroton. Making sure to block any light from passing through the net pot and into the nutrient solution. --- Covered with a half-bottle dome sprayed with the CalMag water from earlier. --- Hoping for the best! - [1300]: Raised Bucket 5" higher. Now light distance is 48" to top of bucket. - [1820]: Lowered tent exhaust temp to 76 °F --- Lowered AC to 75 °F --- Raised bucket even higher so light distance is 30" to top of bucket. - [2300]: Looking good! --- Sprayed dome and surrounding hydroton with more CalMag water. --- Attached timer to light! So new 18 Hrs On/6 Hrs Off light schedule. --- Lights On: [1600] (4pm) --- Lights Off: [+1000] (10am the next day) --- Decided to go with lights on during the evening/night and off during the later mornings/afternoon (the hottest part of the day) to see if temps can be controlled better. --- Please survive girl! Day 06 - Saturday - 08/08/20 - Total Days: 006 ----------------------------------- - [0800]: Everything was dry. Resprayed hydroton and dome. - [2000]: Here first night cycle seemed to go well! Get'n taller! --- Dry again. Removed the dome. --- PH went up to 6.5 so PH'd down to 5.7 --- Ran the top feed drip ring for a bout a minute to wet the hydroton and rockwool with the nutient solution. ---Too scared to leave the top feed on 24hrs (I don't want over water her and cause dampening-off). Will let dry before re-watering. - [2100]: After closer inspection, I think she's looking a bit yellow. --- Decided to add a bit of grow nutes to the bubbler solution. --- Added 2ml of Sensi Grow A --- Added 2ml of Sensi Grow B --- Solution strength after adding more nutes: 176 PPM --- PH went up to 6 --- I hope that the extra chelating properties of the 'PH Perfect' solution is enough of a buffer for proper nutrient uptake. Day 07 - Sunday - 08/09/20 - Total Days: 007 ----------------------------------- - [0800]: Water dropped a bit (mostly due to evaporation) so solution strength was at 190. --- Checked PH again. Was still at 6, so PH'd down to 5.4 --- Ran the top feed for a minute to wet the hydroton a bit. - [0915]: Since she's looking perky but still a bit yellow. So decided to up the nutrient concentration even more before lights out. --- Added 2ml more of Sensi Grow A --- Added 2ml more of Sensi Grow B --- Solution strength after adding more nutes: 199 PPM --- PH went up to 5.8 - [1700]: Checked nutrients. --- PH: 5.9 --- Solution strength: 202 PPM --- Added 4ml of Voodoo Juice --- Added 4ml of B-52 --- PH after adding more nutes: 5.9 --- Solution strength after adding more nutes: 238 PPM - [2130]: Decided to make a new foliar spray to address the continued yellowing. --- Started with 500ml of distilled water. --- Added 3 drops of CaliMagic --- Added 3 drops of Sensi Grow A --- Added 3 drops of Sensi Grow B --- Added 3 drops of B-52 --- Added 1 drop of Superthrive --- Solution strength: 164 PPM --- PH was at 5.9 and did not adjust. --- Gave her one spray. --- Also sprayed the surrounding hydroton. [END OF WEEK 01]

Welcome to GERGrowDesigns Breeding Cut Phenohunt #1 Diarie Week 10 (Flower Week 3 Day ~23 Since 12/12) This diary is designed for a documentation of an indoor grow, with a strong focus on plant health, environmental control, and optimized nutrient strategy to hold this Genetic and use her for Breeding in Future projects . The Harvested Mother Plant ,can be found in the older Strawberry Cola Sherbet Diarie💚 What happend in the past ? -Cut removed from Mother in Flower Week 2 -Clonex Gel used ~10 days Rooting Process - 2-3Weeks Revege Process -transplanted in 0.3l pot -transplanted in 12litre pot + Bigger Tent -Plant/Health/Root Care -Motherplant Feeding Shema , low EC , Spraymix -Took 9 Cuts From The Plant -Took 6 Cuts From The Plant -Feeding Shedule for Regeneration and Growth -Prepared New Mother Plant -Last Veg Week before Flower -tent move in bigger Home 100x100 -light Switch to 12/12h ,its Flower time 15.03 -One Time nutriets Boost for Flower Switch & Stretch -ScroG Install and Daily Training in First Flower Weeks Grow Setup & Strategy: • 🌱 Genetics: Strawberry Cola Sherbet -Sweet Seeds • 🏕️ Grow Space: 100x100x200cm • 💡 Lighting: 1x200W LED • 🌡️ Average Temperature: ~26°C • 💧 Humidity: ~50% • 🍵 Pot Size: 20L • 🌿 Base Nutrients: Hy-Pro • ⏳ Flowering Expectation: 5 weeks Flower Week Three is Done , Media is from 09.04 flower Switch was at 15.03 (12/12) Flower Day ~23 , looks like shes taking the shortcut of 4-5 Weeks Flower Again Like the Mother 🎯 Isnt it Fascinating how Fast some Strains can Develope After Switch🏆 she will probably overun my other Photo Tent which changed 2 Weeks before to Flower 🌱 Also Special attention will be given to Hy-pro during all phases, aiming to enhance Structure , nutrient uptake efficiency, and final quality, while closely monitoring plant response. Feedback, questions, and constructive discussion are always welcome. Community interaction is a key part of what makes competitions like this valuable. 🌿 Happy growing & good luck to everyone!

FLOWER WEEK 5: Big Bang | Divine Seeds 💥 ​🌱 FLOWERING PROGRESS ​The Big Bang is hitting her absolute prime mid-bloom phase this week! 💥 The flower production has taken over completely, and the colas are swelling at a notable rate. The canopy is holding its uniform structure above the Scrog line, and the stacking is looking tight and intense. 📈 ​Trichome development has accelerated massively over the past few days, coating the main bud clusters and surrounding sugar leaves in a frosty layer of resin. The pistils are incredibly dense and long, forming thick, hairy white crowns on every single top. Overall plant vitality is outstanding as she continues to channel all her internal resources into maximizing bud volume and flower density. 🕸️✨ ​💧 NUTRIENT FEEDING & WATERING ​I’ve dialed up the organic nutrition line to match her peak-flowering hunger, pushing the main sugars, bio-stimulators, and energy enzymes to maximum levels. ⚡ ​Current Feeding Schedule (per Liter): ​Bio-Bloom: 3.0 ml/l ​Bio-Heaven: 4.0 ml/l ​Acti-Vera: 4.0 ml/l ​Bio-Grow: 1.0 ml/l ​Top-Max: 1.0 ml/l ​Calmag: 1.0 ml/l ​Parameters: ​pH: 6.5 ​Relative Humidity (RH): 59.0% 💧 ​Temperature: 30.0 °C 🌡️ ​VPD: ~1.73 kPa ​CO2: 675 ppm 💨 ​💭 GROWER'S NOTE ​👀 Status Report: Things are heating up in the tent! With temperatures hitting 30°C and a matching 59% RH, the VPD has pushed up to around 1.73 kPa. This high-performance climate means the Big Bang is transpiring at full speed. By upgrading the diet to 3 ml/l Bio-Bloom and boosting both Bio-Heaven and Acti-Vera to 4 ml/l, I'm giving her the massive energy reserves she needs to process nutrients at this high transpiration rate. Luckily, this solid Divine Seeds phenotype handles the summer-like conditions like an absolute tank. The buds are noticeably packing on frost and thickness daily. Keeping the airflow high and pushing hard through peak bloom! 🚀🌱✨

Going strong cannot wait until they stack! Remember It’s 420 somewhere ™️

June 7 - We ordered some new lights last week, they are 240w kingbrite samsung lm310h with uv/ir, 3000k, and meanwell drivers. We setup the new room and moved the girls into there. After a bit of LST and a watering (with nutrients) at roughly 7ph, they were ready to go under the 2 new lights and the same SF-1000 we have been using in this grow. The new room is a 12 ft enclosed trailer. I moved everything from the small tent into this. I put clear poly on the walls, floor and ceiling. I put poly on the shelf I am going to be keeping in there as well. I bought 50ft of 6mm mylar and lined the floors, roof and sides with it. I plan to get some reflective tape to seal everything and to cover the wood. I did not get much of a chance to watch temp's today as they it was later in the evening after all was said and done. The inline fan blowing in air from outside. June 8 - 9 AM i checked the plants, they were at 25.2 and 50% RH. Late through the day I had checked and we had gotten up to around 32 degrees. So I moved the inline fan to the closer vent, hooked up to that, and had the air blowing out of the trailer with the inline fan sucking it from above the lights. I then added oscillating fan and had it blowing air on the left side of the room so it would somewhat circulate once I closed the doors. I then checked at about 9pm and we were at 22 degrees. Definitely noticed a decent amount of growth already. I have the lights on a 22/2 cycle as I was worried about the heat at night time. June 9 - Some great growth from the girls, still having problems controlling the temps in the afternoon. I decided to prop the door open a bit to have a constant breeze throughout the day while I am at work. Decided to do some more LST and also a bit of defoliation. I took about 25% of the leaf's that were blocking the new growth as it was getting a bit bunched up. I was then told the leaf's are almost solar panels for them. So from now on I will be trying to just do some tucking unless needed. The leaf's I removed were most of the damaged leaf's, I am not to sure if that makes much of a difference. I gave them a watering with only water as there is a potential I am getting a bit of a nutrient buildup along with the PH problem. Or potentially the reason for the ph problem is nutrient buildup. After watering with A PH of 7 I got some run off and tested it. The smaller plant gave me a PH of about 5.5 where the bigger one is around 5.0. June 10 - Plants are looking happy and showing tons of growth. Seems to be trying to stretch outwards. Not a ton of sign of PH issues showing so potentially getting it under control. Still a bit of damage to previous leaf's but it is what it is! The last few days I have been leaving the door open a bit in order to keep the temps down. I decided to test something and turn the lights off (automatically) at 11AM and back on at 5PM so light schedule has now changed to 18/6 and it seems I may have figured out the issue. We haven't had lots of sun the last couple days so it hasn't been to hard and I have yet to know if it truly fixed the heat issue for now. (I will be looking into a ac unit as well since it typically gets to around 30-35 around here. June 11 - Pulled some of the branches back down and added a few more LST spots. Seems we have a good amount of growth from the smaller plant out of the 2 topped spots. Unfortunately it looks like I fucked up on the bigger plant and only one of the nodes seems to have new growth. I will continue to monitor that but I think I cut the node to low and also to soon. Other then that, the girls are doing great. They seem to be absolutely loving these new lights. I gave them some nutrient water today as well. roughly 3L each. They seem to be A hell of A lot more thirsty under these new lights. June 12 - The girls are doing great , they are still just doing growing away. Lots of progress everyday. I am going to be getting a go-pro so I can set-up a time-lapse for the rest of this grow. I received my new inline fan, I got A ac infinity CLOUDLINE T4 with the temperature humidity controller. I am going to be having one fan pushing fresh air in and one fan pulling out the hot air. I will be doing that tomorrow since I have to work today. June 13 - I ordered another 50ft of mylar and that showed up today. I have decided to remove the shelf and add another 3+ feet to the grow space. So today I installed more poly, mylar, the ac infinity fan. I have it set-up to pump in air if it gets to warm. I am thinking of switching it to the output that way if it gets to hot or to humid I can have that air pulled out of the trailer. Right now my other inline fan is the outtake and I just have it set on full. Overall I think everything is set-up a bit better and more accessible. I will be putting my 2x2 tent in there at the left of the doors so I can have a veg room when these 2 are in flower. I plan to have 4 in veg and 4 in flower for the next grow. Still waiting on JOTI seeds, ordered 3 weeks ago and still have not been shipped. I will be getting those going the moment they arrive. The girls seem to be happy still, did a bit more LST to try to keep everything even, mainly I'm just pulling down on the spots I already have tie wire on.

Getting ready to take clones and flip them into flower in the next few weeks

Just been flushing for a week reckon it will take another 5 days at least. The lower third i took off has been dried and is curing had a lil change of heart haha. Smells very strong fruity kinky and the colours have maintained.

Days 35-42 (Day 36) Some minor problems starting to arise here. A few times this week it got up to 90+ degrees which I think may have caused a bit of heat stress in some of the plants. I’m seeing a bit of cupping/crinkles on some of the fan leaves and some of the new growth is looking pretty gnarled and twisted. I hear windburn can cause this too so I’m turning my fans down to low speed. This could also be a problem with humidity so I’m going to turn off my humidifier, dim the lights and raise them. During my last feeding I mulched in some worm castings but it seems like they’re keeping the soil/coco from drying out. Pots are still decently heavy and even the surface is still quite moist but they aren’t showing any major signs of overwatering. I figure it will only be a few weeks before the castings break down so I will just leave it. A few of the plants are starting to show yellowing leaf tips which is probably some kind of micro nutrient lockout from my PH being slightly too high. It could also be from nute burn so I will water in 6.0 until I see some runoff. Although the most likely culprit is potassium excess. I’ve been feeding potassium almost as much as nitrogen so far. I know that can cause the yellowing of leaf tips by locking out trace minerals. It can also cause leaf problems like crinkling. Excess K can even cause water retention! Will water at 6.0 until run off next watering. The lst is coming along nicely. It was a good idea to remove the first two sets of branches (not leaves). Now I have 4-6 perfectly even stems coming from each plant that I plan to top one more time each. (Day 37) Today I’m going to vacuum, clean, wipe down and spray all my equipment in the tent. I’ve been letting the floor get quite dirty and I haven’t had the chance for a thorough clean since last round. I’m kind of surprised I haven’t seen any powdery mildew yet. I guess the prevention spray is working because the room has to be infected from my last crop. (Day 40) I was reading that you can foliar spray whatever you are deficient in for an immediate uptake. I‘m going to try that with my current potassium excess since it locks out trace minerals. I’m going to foliar feed a bit of phytoplankton at 15ml/L and some MagnifiCal + VeloKelp from Remo nutrients both at 5ml/L. The cal mag is not organic but as long as it’s not going into the soil and doesn’t contain chlorine I’m fine with it. I’m also going to be changing the light cycle to 18/6 for the remainder of veg. This will be their first dark cycle so they can properly foliar feed. Edit: humidity shot up to 85% a few hours after foliar spray. I went to top dress everything today and I mixed up the plants while doing so! So the ones I was unsure about I gave 1 extra tablespoon. I won’t top dress again for at least 10 days. Might give a light tea sometime next week. I also tilled the shit out of the top of each pot. It had a hard crusty layer on top that was keeping the medium from drying out properly. I’m not going to water again until everything is bone dry. Then I will water until slight runoff at 6.0 ph with some Dr. Marijane bacteria/root probiotic. I’m starting too see a lot more of these abrasions on some of the bigger fan leaves. It almost looks like thrip damage but I’m 100% sure it’s not a pest above ground. It could be bulb mites, which I found in my worm castings but I can’t check until the roots are more established in their pots. The leaves themselves are cold and feel damp to the touch. I haven’t even seen a fungus gnat since I last fed. I’m hoping it’s related to the K excess and clears up with the troubleshooting. (Day 41) Just ordered a wire cube rack to prop my plants up with and help evaporation/root warmth. Each cube is 11.8”x11.8”x11.8” and it comes with 16 cubes. So it will fit just perfectly in my 4x4. Depending on the size, I might order another one for the flower room where I would need 25 cubes.

Day 3 week 3 looking amazing

Sixth week of flowering. It was only a matter of time before the first problem appeared. The flowers are so heavy that they started to bend. I had to immediately stretch the support net. It's a lesson for next time.

Ist schon heftig... 3 Wochen mehr Wurzeln, oben war kaum mehr. Jetzt aber ist sie schon 10-15cm größer als ihre kleine Schwester.

Rainy week, no need to fertilize or to water the plants. The are growing fast and very tall, despite it should be small one, the tallest ones are from seeds I found in my Baby Boom last year that could be a good explanation. I give a bit more of fertilizer and I started with the Boost + for the flowers.

These all so fine this one I would say is but more Indica 2 was a bit more Sativa and 1 was about right down the middle Oh man she beautiful all 3 about same small diffrence but all had good indoor struckture and so far high flavor all remind me of Skunk#1 Easy to trim big dence buds

Hello Diary, Apollo F1 could best be described as "little fat". The smallest on the Farm, only 40 cm, with a pile of leaves from which the formed flowers peek out. The leaves are a beautiful dark green color, densely overgrown with the entire plant. Since it did not grow too high, the plant took the shape of a ball. As for the flowers, they are filling in nicely and the trichomes are starting to appear. The scent has become more intense, just as befits this stage of flowering. Watering has become more frequent, every three days each plant on the Farm receives about 2.5 liters of water. I continue adding Bio Flowering Booster and Easy Bloom tablets. Conditions on the farm are good. The temperature is around 28 degrees, while the humidity is around 45%. Here's what it looked like last week. 06/06/2023 - Day 38. Watering. I added all three components from the Bio Flowering Booster. pH I lowered it to 6.0. Each plant received about 2.5 liters of water. 09/06/2023 - Day 41. Watering. This time I put one Easy Bloom tablet in 7 liters of water and watered all three plants on the Farm with that amount. 10/06/2023 - Day 42. End of the sixth week. I photographed the plants and removed three or four yellow leaves. Apollo F1 - 41 cm That's all for this week, thank you all for your support and see you soon.