Buenas a tod@s... 3ra semana de floración de las red cookie gelato, de momento van bien, algunas hojas oxidadas a esta altura pero creo q es normal, eh podido regular bien la comida( a mí creer) y eh visto mejoras en las variedades, no las noto como antes q estaban como decaídas y se las veia agobiadas, las veo bien y en esta tercera semana se ve claramente la diferencia... Los nutrientes utilizados se ve q son la bomba... 🙌🏻👌🏻 La semana q viene más y mejor, se están poniendo hermosas...❤️ Muchas gracias y buenos humos para todos... 💨💨🇦🇷🤝🏻🇪🇦 🏻‍♂️

Looks going well.

In the middle of week 5 and things are still running well. I will try and get more pictures as the plant really starts the flowering push.I haven't done any thing new other then add some supports to certain stems that might need it later in the flowering stage.

Week 3 Flower (Bloom Week 3) – Daily Tasks Evening (Lights On) Check environment (temp 24–27°C, RH 55–60%). Inspect leaves and buds for pests, mold, or deficiencies. Water/feed (depending on medium): balanced bloom nutrients with slightly higher P and K. Ensure good airflow (oscillating fans). Adjust plant training (light defoliation if leaves block bud sites). Check for early signs of stretch finishing. Evening (Before Lights Off) Ensure irrigation is not too late in the cycle to avoid wet medium during dark period. 👉 In Week 3 bloom, the plants are finishing their stretch and starting to put more energy into forming bud sites. Main job is: Setting Scrog net 2layers ,Control environment (VPD, airflow) ,Support the plant with bloom nutrients.

Last week we noticed one of the ladies had begun to show sex. A couple calyxes with barely visible white hairs coming out of them. Seeing as there's no electricity where the garden is located we opted for a 1500 lumen LED lantern, that we turn on at 11:pm every night for about 40 minutes to and hour. This seemed to have done the trick as no more hairs have been seen and the vegging process is back on track.

They still youngings so I only give straight water P.H at 6.5, 18-6. Germinate on the 29th of Dec straight into coco loco sprouted on the 2nd of Jan. NEWYEARS BABY!!

Saying around 3 weeks left untill I harvest the flowering tent under the mars hydro already got the next batch of phenos in veg stage around week 5 so I have plants to flower right away for you guys had my tent on 12/12 all year using natural sunlight to veg my plants and the mars hydro to flower them

Did some defoliation to get more sun onto the developing buds.

Yo les amis. Les fleurs commencent a gonfler et l odeur se développe

420 Fastbuds Week 7 Gorilla Zkittlez Auto What up grow fam. These two lovely girls are growing absolutely beautifully. Staying on the shorter side but wow have the flower sites grown. The smell is strong and sweet. I upped the tds to about a 1000 but will dial it back down in the up coming weeks as they finish up. All in all Happy Growing

During this week the plant has basically done its last big stretch. The hairs have started to develop and I have stopped using root boosters as stretching is slowing down , on the other hand I have added nirvana to help increase production and resine.

Ph 6 water for 24, will be moving to paper towel so far so good Planted 22/01/25 #3 #4

Waiting for their flowering.😎

Eccoci di nuovo qui!!! Super eccitato per questa nuova collab con Kannabia Seed Company, team davvero al top, che mi ha dato l’opportunità di testare questa nuova genetica e di condividere i progressi con tutti voi!!! Come sempre partiamo nei bicchieri per poi travasare.. Questa volta verrà svolto tutto sotto la Lumatek Zeus 465 ProC, mi aspetto molto da questo ciclo!! WOOOOOW!! Pianta DEVASTANTE!! Ma che colori ha?? Mi ha lasciato senza parole dall'inizio.. Complimenti TEAM, manca poco alla degustazione!! Grazie a tutti per il supporto ❤️🍀🔥

Going great so far except the 2 Gorilla Zkittles are still a little far behind but they are starting to bounce back! Day 18 everything finally transplanted in 5 gallon pots except the hulk berry is in the 3 gallon, hopefully the 1 small gorilla zkittles hits a growth spurt soon🤞🏼

SOME SEEDS ARE STARTING TO POP OPEN AFTER 1.5 DAYS SO I WILL PROBABLY BE PUTTING MOST OF THEM IN THE SOIL ON APRIL 23RD👍 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Not a very good plant to grow. Made a lot of mistakes

Another good week with lots of vigor growth. Training is going as i want , got to love bushes. Another 1-2 weeks before puttning them in flower.

Can't Lst this thing enough. Seems like every other day it needs readjusting. Autos are crazy when they start going.