i started with LST. unfortunately the plant grew too fast in height, which doesn't make it any easier now. next week i'll try it with twine. maybe i should it just let it grow as it likes.

Hey everyone 😃. This week they have become more and more beautiful 🤗. The smell that wafts through the room is very sweet and delicious 😍. They absorb their food very well 👍😎. This week you will get the full power of flower fertilizer again. I now had to start supporting them so that the shoots would not bend 😃. Have a nice week, stay healthy 🙏🏻, and let it grow You can buy this Strain at : www.Zamnesia.com Type: Runtz ☝️🏼 Genetics: Zkittlez x Gelato 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205 W 💡💡☝️🏼 Soil : Canna Bio ☝️🏼 Nutrients : Canna Bio ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 6.0 - 6.3

26/7/2019 Hi guys it's time to harvest in two weeks I think and hope not more I can cut let's say this beauty I can not wait I stopped the nutrients two days ago to prepare the pot to do the washes is all here So we hope not to cut the first of the due because I don't do it any more anyway ---------------------- 22/7. I'm noticing that it has a difference of other qualities that it doesn't seem to blame for the nourishment I am trying to increase .... I have to say that it has a very strong smell and the tops! they are very hard and full of glue!

June 7 - We ordered some new lights last week, they are 240w kingbrite samsung lm310h with uv/ir, 3000k, and meanwell drivers. We setup the new room and moved the girls into there. After a bit of LST and a watering (with nutrients) at roughly 7ph, they were ready to go under the 2 new lights and the same SF-1000 we have been using in this grow. The new room is a 12 ft enclosed trailer. I moved everything from the small tent into this. I put clear poly on the walls, floor and ceiling. I put poly on the shelf I am going to be keeping in there as well. I bought 50ft of 6mm mylar and lined the floors, roof and sides with it. I plan to get some reflective tape to seal everything and to cover the wood. I did not get much of a chance to watch temp's today as they it was later in the evening after all was said and done. The inline fan blowing in air from outside. June 8 - 9 AM i checked the plants, they were at 25.2 and 50% RH. Late through the day I had checked and we had gotten up to around 32 degrees. So I moved the inline fan to the closer vent, hooked up to that, and had the air blowing out of the trailer with the inline fan sucking it from above the lights. I then added oscillating fan and had it blowing air on the left side of the room so it would somewhat circulate once I closed the doors. I then checked at about 9pm and we were at 22 degrees. Definitely noticed a decent amount of growth already. I have the lights on a 22/2 cycle as I was worried about the heat at night time. June 9 - Some great growth from the girls, still having problems controlling the temps in the afternoon. I decided to prop the door open a bit to have a constant breeze throughout the day while I am at work. Decided to do some more LST and also a bit of defoliation. I took about 25% of the leaf's that were blocking the new growth as it was getting a bit bunched up. I was then told the leaf's are almost solar panels for them. So from now on I will be trying to just do some tucking unless needed. The leaf's I removed were most of the damaged leaf's, I am not to sure if that makes much of a difference. I gave them a watering with only water as there is a potential I am getting a bit of a nutrient buildup along with the PH problem. Or potentially the reason for the ph problem is nutrient buildup. After watering with A PH of 7 I got some run off and tested it. The smaller plant gave me a PH of about 5.5 where the bigger one is around 5.0. June 10 - Plants are looking happy and showing tons of growth. Seems to be trying to stretch outwards. Not a ton of sign of PH issues showing so potentially getting it under control. Still a bit of damage to previous leaf's but it is what it is! The last few days I have been leaving the door open a bit in order to keep the temps down. I decided to test something and turn the lights off (automatically) at 11AM and back on at 5PM so light schedule has now changed to 18/6 and it seems I may have figured out the issue. We haven't had lots of sun the last couple days so it hasn't been to hard and I have yet to know if it truly fixed the heat issue for now. (I will be looking into a ac unit as well since it typically gets to around 30-35 around here. June 11 - Pulled some of the branches back down and added a few more LST spots. Seems we have a good amount of growth from the smaller plant out of the 2 topped spots. Unfortunately it looks like I fucked up on the bigger plant and only one of the nodes seems to have new growth. I will continue to monitor that but I think I cut the node to low and also to soon. Other then that, the girls are doing great. They seem to be absolutely loving these new lights. I gave them some nutrient water today as well. roughly 3L each. They seem to be A hell of A lot more thirsty under these new lights. June 12 - The girls are doing great , they are still just doing growing away. Lots of progress everyday. I am going to be getting a go-pro so I can set-up a time-lapse for the rest of this grow. I received my new inline fan, I got A ac infinity CLOUDLINE T4 with the temperature humidity controller. I am going to be having one fan pushing fresh air in and one fan pulling out the hot air. I will be doing that tomorrow since I have to work today. June 13 - I ordered another 50ft of mylar and that showed up today. I have decided to remove the shelf and add another 3+ feet to the grow space. So today I installed more poly, mylar, the ac infinity fan. I have it set-up to pump in air if it gets to warm. I am thinking of switching it to the output that way if it gets to hot or to humid I can have that air pulled out of the trailer. Right now my other inline fan is the outtake and I just have it set on full. Overall I think everything is set-up a bit better and more accessible. I will be putting my 2x2 tent in there at the left of the doors so I can have a veg room when these 2 are in flower. I plan to have 4 in veg and 4 in flower for the next grow. Still waiting on JOTI seeds, ordered 3 weeks ago and still have not been shipped. I will be getting those going the moment they arrive. The girls seem to be happy still, did a bit more LST to try to keep everything even, mainly I'm just pulling down on the spots I already have tie wire on.

We have a super successful young lady. The Sweet Cherry Pie is taking color, is starting, the flowers are still swelling and we look forward to seeing the final form. The top tops are higher but all made a nice bunch flower, the Marshydro care is fitting. We are in flush at pH 6.0 recommended to promote the absorption of all feeding residues. LIGHT >> MARSHYDRO SP3000 AT 100% OF POWER .. TENT >> MARSHYDRO 120x60x180 CHECK IG >> https://www.instagram.com/marshydro_aliexpress2/ Buy >> marshydroled.aliexpress.com TENT >> MARSHYDRO 120x60x180 CHECK IG >> https://www.instagram.com/marshydro_aliexpress2/ Buy >> marshydroled.aliexpress.com

Hoy transplante las 4 RHC a macetero de 3 litros, aproveche de enmendar el sustrato y aplicar QUILLAJA para prevenir plagas. También les aplique microorganismos estilo drench, si perder una gota de agua. 13-10 han sido regadas sólo con agua desde que fueron transplantadas.

Just starting , This is my soil mix! Only took two days to break soil pretty sweet!!

Nice colours

Used royal queen seed fems popped 4 and 3 where successfully. Through veg stage no problems quite sturdy plants growth rate was the same on all round, had abit of nitrogen deficiency. Flower stage everything changed plants started to grow at different weeks and need separate feeds which became annoying, think this was done to pheno types being different. Drying stage: I used this new herb dryer called wedryer for to plants and hung the other in the tent. Wedryer works if you have small yield as can’t fit a lot, drys within a week though but also looses flavour. Have to wet trim bud and then leaves bud flat in one side due to them sitting on the dryer netting. Has fan with carbon filter which stops smells. (But myself prefer hang drying). Used trimbag to finish the buds off love this product and recommend to others to buy.

Everything is coming along nicely. I had some major hiccups in early flower that will probably be detrimental to my yield but at least now I know better. The two blackberry breath plants are by far the best plants in the tent. The garlics aren’t filling out like I was hoping they would and the I don’t think the cheese is going to fill out either. Getting some good terps but it’s just so airy. The slurricane looks ridiculously frosty and has some beautiful gas terps but she’s a runt, isn’t going to yield much and the powdery mildew is getting worse. I’m going to rearrange the plants in the tent to see if the pm is being caused by cold night temps or genetics. I gave one last synthetic feed to everything. I might give one more half strength depending on how done they look around day 48. I see some nice purpling and fading start. I started a new round of seeds for my next run. I’m popping the rest of the blackberry breath’s and some other random beans I had lying around. Check out my other diary if your curious. I just ordered a 12 pack of gelato 41 x dosido from Archive genetics for $290cad!!! I knew these elite Cali breeders were pricey but come on...

Finally the buds are starting to take shape and actually look like buds ! The temps have been hot but I keep the lights of during the daytime from 11am to 11pm to avoid the hottest hours Defoliate as it was essential to avoid moisture buildup. Other then that the plant stopped stretching and it’s growing buds from now on O super frosty all ready the phone cam dose no justice!

Added Exhale c02 and top dressed in each pot with 1 tablespoon per gallon of growing medium my pots are 3.6. I added 3 tablespoons. It is my hopes that with adding the slow release dry amendments and once the c02 bag sarts growing my plants will finally grow. They are short but have 4 nodes at day 21. What is an exhale c02 bag? “The ExHale bag is a patented strain of mycelium that produces an abundance of CO2 without fruiting. This means that when our bag is activated, the mycelium grows, eating the substrate it comes with, giving off heaps of CO2 straight into your garden, and it does all this for 6 months - guaranteed!” At day 25 I am not impressed with the size of these girls? Hope they hit a growth spurt soon? Their internodes are stacked very nicely. At day 28 growth is very slow. Practically none existent since my top dressing at day 23. 2 plants have received a very minimal nutrient burn. As I do not have a soil ph tester? I will be watering with a ph of 6.0 rather than 6.5, hopefully that helps. ONWARD!

I was under watering quite a bit in an attempt to make sure I didn’t flush out the benes and nutrients of the super soil. Ironically, I might have killed all the benes. Lol. Either way, they’re getting about 1 gal every other day now. Growing strong. This plant got some of the most thrip damage. It also had some really strange early growth. It looks about a week or so behind the other two autos that I planted at the same time... Just did another spinosad treatment. I haven’t seen any more thrips in the greenhouse since the first treatment 10 or so days ago. Saw a leaf hopper in there though 😡

DREAM SHERBERT / KANNABIA WEEK #8 OVERALL WEEK #3 FLOWER This week she's doing great buds are really starting to get some weight to them she's had no issues so far! Stay Growing!! Thank you for taking a look it's much appreciated!! Thank you KANNABIA!! Kannabia.com DREAM SHERBERT AUTO

This week battling a bit with the wind in the growtent (you can see in the video i included), had few leaves with windburn but now all are looking fine. Continued LST to create an even canopy. Also think i should have removed the duct tape i used to repair the broken stem should have been removed earlier (it was on there for 10 days) as i saw afterwards (see in the pictures of broken stem repair) that the area of the stem where the duct tape was stayed fairly thin.