The Grow Awards 2026 🏆
Likes
45
Share
@Dingle
Follow
All seems ok so far🤞🏻 Happy with the bud production throughout week 6 also the smell is also quiet strong this week 😬. No more PK and maybe one more very light feed next week before I start flushing. Will also lower the LED to 12 inches for the remainder of the this grow.
Likes
24
Share
Hey everyone 😃 The time has come , On flowering day 69 the harvest was carried out 😍. After spending two days in the darkroom at 62% humidity, they were now harvested cleanly by hand 😃. After harvesting, they were laid out on the net as usual, where they can now slowly dry again for about 7-10 days at 62%. Then they come with 62% in jars for 2-4 weeks, and then the 58% boveda packs are put in 👍. Of course, I will come to the phenotypes themselves in detail in the last update. Until then, I wish you all the best, stay healthy 🙏🏻 and let it grow 🍀👋 You can buy this Strain at https://www.amsterdamgenetics.com/product/kosher-tangie-kush/ You can buy this Nutrients at https://greenbuzzliquids.com/ Type: Kosher Tangie Kush ☝️🏼 Genetics: Kosher Kush X Tangie 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green Buzz Liquids : Organic Grow Liquid Organic Bloom Liquid Organic more PK More Roots Fast Buds Humic Acid Plus Growzyme Big Fruits Clean Fruits Cal / Mag Organic Ph - Pulver ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 - 0.4 EC. Add Cal / Mag 2 ml per l water every 2 waterings . Ph with Organic Ph - Pulver to 5.8 .
Likes
1
Share
Likes
10
Share
Likes
5
Share
A it late with the update as I broke my phone,. To say it was my 1st harvest was very pleased with the outcome, 38grams dry of mostly tight nugs, trichomes on the main colas were turning Amber so cut those down couple of days earlier and left lower nugs to develop a bit more. Cured for 2 weeks now and buds smelling and smoking great, smooth taste and full of flavour! Next crop been planted very soon.
Processing
Likes
101
Share
All going kind off as planed, appart from the SuperGlue Girl. just did a big 2,5 gallon Flush on her and now waiting for the soil to dry and start over the feedings. clean her good so i'm hopping for the best 😅 lets see how they react and if they cacth up 😍😋 Loving this LED Tec 😍 Girls: 1-BlueBerry 2-Alaskan Purple 3-Poyote Gorilla 4-Hindu Kush 5-Whitw Mango 6-Super Glue 7-Badazz Cookies 8-S.A.D. tent -8x8 / 2.4x2.4 but i'm only using 1/2 so 4x4 / 1.2x1.2 Led - Lumatek 465w Compact Pro at 100% All i Grow is medicine for myself, Stay safe, stay tuned and B Happy Peace out D
Likes
228
Share
@StarLorr
Follow
Welcome to my Pablø Ęscøbar diary. In this diary: Seeds: sponsored by Ðivine Șeeds Media: Promix HP Nutrients: Advanced Nutrients, Diablo Nutrients. Light and Weather: Şun☀️and Mother Earth.🌎 ___________________________ Feeding: Tue 23Jul: 4L nutrients pH'd 6.5 and 4L water not pH'd Wed 24Jul: 9L water not pH'd Thu 25Jul: 4L water not pH'd Fri 26Jul: 7L water not pH'd Sat 27Jul: 4L nutrients pH'd 6.5 and 2L water not pH'd Sun 28Jul: 10L water not pH'd Mon 29Jul: 8L water not pH'd *please note that most water only feedings are 2L at the time throughout the day in bottom saucer* ___________________________ What a beautiful summer that we're having. Just one day last week it was cloudy and colder and got some rain, rest of the week sublime weather. My Ðivine Ladies are pre flowering and hopefully will be blooming soon, next week update should be FLO fingers crossed😄 ______________________________ Pablo got knocked down by wind gust last Thursday, no damage. Added an anti-tilting device all is good now for our big Gal😁 ______________________________ Øpi was found with a spider mites nest..squished the squatter with my thumb and index... all 3 Ðivine Gals got the spa treatment, soap insecticide spray 2 litres each soaked them real good, before flowering it was a smart move😉 ______________________________ Thanks for stopping by, likes and comments are appreciated!👊🏻😎 Keep on growin! Keep on tokin!!! 😙💨💨💨💨💨
Likes
3
Share
Looks like buds r going slow super cheese is on track nice rop colas
Likes
9
Share
Last run of the growing season. Biscotti Mintz by Barney's Farm. I wasn't satisfied with the last crop's yield so i wanted another crack at it. This time I'm armed with a digital Lux meter so i can better dial in the light without the guesswork. Looking to start the clones off with between 5000 and 7000 LUX at the canopy. But i didn't like the brightness at 8000 so i upped it to 15,000 Lux. I think the 5k to 8k Lux recommendations for clones was for clones in the process of rooting. Recommended Lux values for vegging plants is between 15,000 and 50,000 Lux. They were very lanky with long internodal spacing which I thought might be insufficient lighting. Because the other Biscotti Mintz grows and research i've done, shows a very bushy indica trait growth pattern. So either i have a shitty pheno, or my lighting wasn't good enough. I'm guessing it was the light because preliminary testing with the Lux meter showed that my canopy was quite under lit last run. Again using 3 gallon pots, this time i am crossing my fingers with the substrate because it is reused coco that i washed and buffered myself. I've never done this before so i have no idea what's going to happen. For all i know they will all be dead in a few days lol. Anyways, i tested the coco pH last night, and after buffering with 2x strength calmag and soaking the coco in a 6.0 pH for 48 hours, the pH is sitting around 6.8 in the coco. Not where I wanted it, but it's doable. I believe the coco brand new out of the bag measures at 6.8 so... I will be watering in 6.0 pH to try to achieve a balance. Treating the roots before planting with Azos and dusting the planting hole with Mykos. The nutrient solution is very mild to start off. About 450ppm. Hygrozyme will be added to the mix and watered in to help break down the old dead root matter that wasn't able to be sifted out of the coco. The cellulase will break those roots down into usable food for the plant to uptake, and clean up the dead roots at the same time. Hygroben will also be added because i have some left from the last crop. And after seeing the results of using bacteria, i'm pretty sold on using it. Today is March 4th, 2024. I like to start on the first of the month but i like starting on Monday's better for keeping my weed soaked brain organized a little easier. I'm thinking to do half strength doses 2x per week instead of full doses 1x per week. It's twice the mixing, but that's ok. There will be 7 plants in total, and the experiment i am running this time, for anyone that wants to check out, is 1 of the plants i will do a seriously severe defoliation on while leaving the rest untouched. And we'll see how it plays out yield wise. I'm sure of the outcome already, but I'm tired of the babbling dummies all over the place that preach fan leaves fan leaves... So we shall see! I had the pH of the nutrient solution set to 6.0 but after adding the enzyme and liquid bacteria, the pH dropped to 5.78, so beware of that if you use those products, even though they claim not to affect the pH. The light dimmer is set to 6 of 10. The clip fan is set to 2 of 10. Temps set to 74F and humidity set to 70% humidity. The light is 18 inches from the canopy at a dimmer setting of 6, which gives the canopy 15,000 Lux. Each plant was gently watered with about 300ml of nutrient solution, which was carefully and gently dispensed with a 140CC syringe Hope they like what i've done with the place lol. P.S. I realized that the 5000 to 7000 Lux was for clones that are rooting. So I had the lux at 12,000 at 18 inches from the plants at a dimmer value of 5. I've now upped the dimmer to 6. Tomorrow i'll check the lux and see where it's at. The clones have just come out of the dome today so i don't want to push them too aggressively too fast. MARCH 5, 2024 I just tested the Par light reading on BM #1 and the BM right in the center. BM #1 Par reading is 247. Center plant is 270. Light dimmer is at 6 and light is now 13 inches from plant canopy. MARCH 9, 2024 Fed again today. There is some progress in growth. 1/2 inch increase. The clones have been upset getting adjusted to their new environment. I've upped the dimmer to 7 and the PPFD and DLI numbers are good. Humidity remains set at 70% and temperature is set to trigger the fan at 78F Light remains where it was so the plants have grown 1/2 so the light will be 12 inches above the canopy. Mixed up 2 liters of nutrients and the ppm was 555, and the pH was adjusted to 6.15. 2ml Per liter of hygrozyme and hygroben were also added. Clones have curled leaves and a perky/droopy stature. The leaf edges are browning a little bit. I'm not sure whats happening with them other than it's just the effects of transplanting and drastic environmental change. What i'm wondering is how they will/are reacting to the used coco underneath? We press on with fingers crossed! 🙏😁
Likes
9
Share
Purple paralysis/ rainbow candy is jus hit the 5 week of flowering she looking very promising scent is 🔉 volume should turn up these nxt couple week
Likes
13
Share
The plant is a beast. Having a lot of light burn issues and I dimmed the LED but it still continued. I’m out of vertical space in the tent. Trying to keep her happy until harvest.
Processing
Likes
15
Share
Okay so the result of my LST surprised me like a lot. The plant looks great under the light, it’s still my second grow so I hope to learn a lot about the beautiful plants and how they respond. I want to experience everything to learn from them and know how to respond. I think this week went good but the dry wet cyclus is something I really needed to learn this week. I first tried watering every day but i noticed that the soil wasn’t dry at all, so I thought no that’s maybe just the soil. *Ive learned this cycle in the next week* spoiler alert: it wasn’t I still give around 1 tbsp of the molasses because the plant is really responding good to it. The small plant is also looking healthy so perfect, just keep giving her love. I did a big oops: So, the plant grew bigger and bigger and faster then I could keep up. So I decided to lst some more, Olga went perfect and I build a lot of confidence from that. So... busy with the other “big” plant and I started doing the head top, but the band was just to tight, but I noticed that to late *SNAP*. Did I just snapped the biggest branch of the middle plant? Yes, I hated myself for 4 days until I thought: there are no mistakes, just happy..... (fill in with your brainpower) well see what happens
Likes
62
Share
@Reyden
Follow
La tenda (4x4) è in fioritura da circa 2 settimane e la SF2000 lavora a pieno regime riuscendo a coprire bene e in maniera efficace praticamente ovunque, ho trasferito la Purple OG Punch di SSSC che è l’unica autofiorente e mi stava crescendo troppo in altezza per stare nell altro box e quindi aggiungerò lei in questo diario!😄💥🎬💚 Tutte le Gorilla 🦍 sia di Zamnesia che di RQS sono state defogliate nelle foglie più gialle e con carenze, le 3 piante di Seeds Mafia invece continuano così cercando di recuperare le altre in altezza…ora le Gorilla 🦍 sono tutte a 1.800 EC mentre le 3 di SM sono a 1.600 EC, la PPOG è a 1500 EC. Ci vediamo presto con altri aggiornamenti e grazie di essere passato! Grazie Spider Farmer ancora per questo LED SF2000, questo nuovo modello fa veramente la differenza e le piante crescono in maniera ottimale!!! 💯🙌🌱
Likes
20
Share
Easy to grow. Started out pretty rough due to my PH being way to low and honestly plants were underfed being in coco now seems the plants want food sooner then they did in soil. So around day 5 start slowly introducing Megacrop to them. Other then easy to grow fun as fuck smells so good. The yield im really happy with i was only expecting 3 zips tbh. The buds smell so good right out the herbsnow dryer and lightly trimmed and placed into jars for the curing process. I am beyind happy considering the timing and everything. Will be a lovely 420 treat. Thank you to everyone who watched me grow this one :).
Likes
21
Share
2024-08-06 with this Update, iam back in the Timeline. I will not win any beauty contest with this strain becaue of the look, but she shows alreay great volume of Flowers. structure is perfect i placed the Outdoor under a roof i kinda under watered them in the Past and i fertilised them, so not enough water and fertiliser- they are burned. shit happens- thats the Look Fatso GMO F1 Auto, a feminized hybrid strain, emerges from the crossbreeding of two autoflowering varieties: Fatso Auto and Cotton Candy Auto. This California-derived cultivar leans slightly towards sativa, offering growers a straightforward cultivation experience coupled with impressive yields, robust THC levels, and a delightful palate featuring sweet, candy, and fuel undertones. Thriving both indoors and outdoors, Fatso GMO F1 Auto exhibits above-average resistance to mold, while still benefiting from adequate ventilation, particularly in environments with higher humidity levels. Its exceptional resistance to pests and pathogens ensures hassle-free cultivation. While indoor plants maintain a compact stature of around 100cm or less, outdoor specimens can stretch a bit taller, reaching heights of up to 130cm when grown in open ground. Completing its entire lifecycle within a maximum of 75 days from germination to harvest, Fatso GMO F1 Auto delivers yields considered average yet impressive for an autoflowering strain. The combination of high resin production and elevated terpene levels renders it an excellent choice for cannabis extract production. Its terpene profile presents a sweet and funky aroma with savory hints of Skunk complemented by pine and floral notes. On the palate, it delights with flavors reminiscent of sweet candy underscored by subtle fuel undertones. With THC levels reaching a high of 24% and minimal CBD content, Fatso GMO F1 Auto delivers a balanced and uplifting effect, appealing to enthusiasts seeking a satisfying and harmonious experience.
Likes
Comments
Share
@Muuuy
Follow
Week 4 is flower-week! All of our ladies showed signs of pre-flower last week, now there are already visible buds growing. We had to adjust the height of #1 & #2 once again because #3 is just growing crazy. Can't go any higher than the current position without redesigning our whole setup so this will be the final adjustment (hopefully!). #2 is obviously very different from the other ones, she's a little behind in growth. Though, she does have outstanding red colored petioles in comparison to her mostly just green sisters. We increased the amount of nutrients for them since they'll need much more now. This is plant #3/3. She grows way too high for our liking but that's what we expected from the beginning anyways. We continuosly had to adjust the light and the height of the other plants until we can't go higher right now. So wherever #3 wants to grow to now, she's probably getting sunburned from our lamp.
Processing
Likes
7
Share
I have been slightly bending and picking leaves off the original 3. The mazar that I had to start late has not been topped. I believe I am going to use this one for making my feminized seeds so I am trying to stress it the least amount possible. I am top feeding and have noticed a small amount of fungus gnats so i added a bit of diatomaceous earth to the top soil which seems to kill them instantaneously. Have not seen any since. Next week I will be putting together a DIY colloidal silver generator for the fem seeds.