We are watching trichomes every day and it looks like it is almost ready so we are thinking of harvesting next week. It is already possible to see some amber trichomes. Unfortunately it seems that we are not going to harvest the expected amount, the buds were not very dense and fat, apparently the buds are just small leaves with trichomes.

Agora sem aplicações de técnicas, apenas fertilizantes e água, para que a energia da planta seja usada nos botões, quero ver lindos botões, densos e resinados . Por enquanto estou bem satisfeito com o resultado, essas próximas 3 semanas , acredito, serão decisivas para definir um boa produção.

6/11 - My seeds finally came in the mail and I got to soak them this morning. With the start of the soaking I also took the time to mix my Fox Farms Happy Frog Potting Soil along with my nutrients. I wanted to make sure my ratios are a little balanced but slightly heavier on the all purpose fertilizer to start out. In my first feeding I might go a little heavier on the Bud & Bloom than with the All Purpose depending on when I think they need to be fed and how close they are to flowering. Perlite was added to the soil to make sure there was good drainage and I will be using 5 gallon fabric pots. I’m planning to do some LST along with possibly topping/FIMing the plants just to see what comes of it, so I’m excited for that. This is my very first grow and I’m not much of a gardener (yet) so any and all input and advice would be very much welcome thanks 🌱🌱🌿 PS - Sorry for the angle the video the next ones will be correct. 6/14 - All three seeds popped over the two days the spent in the paper towels! Finally putting them in the soil feels good. Going to keep the soil above the seeds moist with a handheld sprayer using distilled water every few hours until the light shut off for the night. I forgot to take pictures of the seeds before planting them. From here I’m hoping to get at least one of them to pop through the ground in the next couple of days. Of course, I’m still looking for tips and input. 🌱 6/16 - All three seeds have made it through the soil so that is more step forward. The critical purple has a shell still on one of its leaves so I’m hoping it pops off on its own in a day or so otherwise I may try to gently tap it off. Currently, the grow lights are about 24 inches away from the seedlings. I think I might keep them at this distance until I notice stretching or leaves curling.

Scusate il ritardo ragazzi ma purtroppo ultimamente nn riesco a stare dietro a tutti i progetti, apparte questo questa settimana sta andando tutto per il meglio, la ragazza è un esplosione di vitalità, ho provveduto a fare topping della cima principale e di tutti i rami più bassi, poi ho legato le cime per farle andare più latelaralmemte, poi volevo fare la stessa cosa con le due cime principali, ma stupidamente ho tirato troppo e nel mezzo di è spezzata leggermente, però per fortuna per ora nn ho avuto problemi e spero che la ferita che ho provocato involontariamente, si rimargini senza dare particolari problemi futuri alla struttura della pianta, vedremo se adottore dei tutori per quei due rami oppure che si irrobustiscano da soli.. Per il resto i nutrienti stanno facendo il loro dovere e la pianta è in ottima salute quindi non posso che essere più che felice per come stanno andando le cose! Grazie come sempre a Mars hydro per la nuova spettacolare luce, che sono sicuro farà la differenza insieme ai nutrienti professionali di cui dispongo! Grazie mille a tutti voi che mi seguite un buon 420 a tutti!

Hey fellow green thumbs! 🌿💚 The day has finally come—our Auto Northern Dragon Fuel from Super Sativa Seed Club has been harvested! After an exciting journey, we’re thrilled to share the details of this incredible plant’s final stage. Let’s dive into the harvest report! 🌟 Harvest Details: Day 75: Harvest Day • Harvest Date: Day 75 • Harvest Method: Our beautiful Auto Northern Dragon Fuel was harvested yesterday. After weeks of careful nurturing, the time was right to bring in this amazing plant. 🌿🌼 • Preparation: Before hanging, we meticulously cleaned the plant, removing all leaves without trichomes to ensure a smooth drying process and to enhance the quality of the final product. 🌿✂️ Current Drying Process: • Method: The entire plant is now hanging upside down to dry. This method helps maintain moisture levels within the buds, allowing for a slower and more even drying process. 🌿🔄 • Environment: • Temperature: 18-22°C (65-72°F) • Humidity: 50-60% Maintaining these conditions is crucial for achieving a perfect dry and preserving the plant’s aromatic and flavorful profile. 🌡️💧 🌟 Plant and Bud Characteristics: Auto Northern Dragon Fuel: • Bud Structure: Dense and sticky, with an impressive trichome coverage. The buds are beautifully formed, showcasing the robust genetics of this strain. • Aroma: Even in the drying phase, the rich and potent aroma is unmistakable. Expect a delightful scent that hints at the powerful experience to come. • Trichomes: A thick layer of trichomes covers the buds, promising a potent final product with a great flavor profile. 🌿✨ 🌟 Care Tips: • Drying Process: Patience is key. Allowing the plant to dry slowly will enhance the final quality, preserving both flavor and potency. Ensure good airflow around the hanging plant to prevent mold and mildew. 🌬️💧 • Trimming: Once the drying process is complete (typically 10-14 days), it will be time to trim the buds. This is where we’ll shape the final product and get it ready for curing. ✂️🌿 • Curing: After trimming, curing the buds in jars for at least 2-4 weeks will further enhance the flavor and smoothness. This final step is essential for achieving the best possible smoking experience. 🍁 🌟 Genetics Spotlight: Auto Northern Dragon Fuel: • Characteristics: Known for its robust structure and dense buds, this strain has shown remarkable resilience and impressive bud development throughout the grow. The final product promises to be potent and flavorful, thanks to the thick trichome coverage and rich aroma. • Harvest Expectations: High-quality buds with a strong aroma and potent effects. The slow drying process will ensure the best possible preservation of cannabinoids and terpenes. 🌍🌿 Fun Fact: Did you know? 🌿✨ Drying the entire plant slowly helps retain more terpenes, which are responsible for the plant’s aroma and flavor. This method also helps preserve the potency and quality of the buds, resulting in a smoother and more enjoyable experience. For all the in-depth action and detailed explanations, head over to my YouTube channel! 🎥✨ I’m sharing all the tips, tricks, and step-by-step guides to help you get the best results from your grow. This week’s harvest has been particularly exciting, and there’s so much more to explore and learn together! 👉 Join me on YouTube Link in my profile 👈 🌟 Conclusion: Harvesting Auto Northern Dragon Fuel at Day 75 has been a rewarding experience. With the plant now drying, we’re eagerly awaiting the final product. Stay tuned for updates on the drying, trimming, and curing process, and get ready for a high-quality harvest! Happy growing, and see you next time! 🌿💚✨ #SuperSativaSeedClub #HarvestReport #NorthernDragonFuel #PlantMagic #GardeningJoy #NatureLovers #PlantPower #InspireGrow #YouTubeJourney

she grows healthy ... and her flowering begins ... she is small because I change her very late to a bigger pot ... I hope she delivers something

Tout se passe bien jusqu'à présent les pistils commencent à sortir j'ai préparé le sol avec des engrais en poudre organique au dernier rempotage. Irrigation a l'eau uniquement. Remplacement de la 400wMh pour 400w SHP.

Day 5 since time change to 12/12. Hey everyone ☺️. Finally the time has come :-) The lady moved into the flower tent on January 6th, 2021 😁. The day before, of course, a cutting was taken 👍. In the flowering tent, the distance between the plant and the lamp is 40 cm so that she can get used to the strength of the lamp. After 3-5 days I go down to 30 cm. This week it was watered twice with 1 l per plant. GHSC enhancers were added to one wash :-). Flower fertilizer will only be added in 12-16 days as soon as the first blossoms are there :-). Otherwise the tent was completely cleaned and the humidifier refilled. For the next few days I have filled fresh osmosis water in canisters again :-). Next week I will remove the bottom shoots so that the energy doesn't end up going into small popcorn buds 😉. There is nothing more to report this week and I wish you all a lot of fun with the update 😀. Stay healthy and let it grow 🙏🏻🍀 You can buy this Strain at : https://sweetseeds.es/de/red-mandarine-f1-fast-version/ Type: Red Mandarine F1 Fast Version ☝️🏼 Genetics: Red Poison Auto®️ (SWS39) X Tangie (California Orange x Hybrid Skunk) 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

🌸 Week 3 Flower – Growing Strong, Tall, and Vibrant! 🌱 Hey Grow Fam! It’s already Week 3 in flower, and I’m thrilled to bring you this update because these plants are doing phenomenally well! Some are stretching up so tall that I might have to get creative in the coming weeks! Fruit production is well underway, and it’s absolutely amazing to watch the canopy fill out as these girls reach their potential. Aptus Holland Pack Unboxing & New Additions This week kicked off with a big arrival: the Aptus Holland nutrient pack! 🙌 I couldn’t wait to share the unboxing with you all; there’s a video up where I go through all the goodies, so check it out if you haven’t yet! Between the photos and videos, you’ll be able to see just how well these nutrients are already feeding these green beauties. Having a blast sharing more content lately—I’m in the zone with editing and creating, so get ready for even more shares! 🌡️ Environmental Control and Fine-Tuning the Reservoir pH Temps this week have been holding around 27.2°C with RH at 65.2% and CO2 at 800 ppm, creating a VPD of 1.26 for ideal flower development. The lighting intensity is at 833 PPFD, and the solution in the reservoir is fine-tuned to a pH of 6.22, EC of 475, with a temp of 21.8°C. Let’s talk pH in the reservoir: it’s a dynamic process, and I’m constantly adjusting it to keep everything at the right level. The pH tends to rise throughout the week, and each day, I work it back down, fine-tuning it to keep those plants happy and balanced. Managing pH is truly a hands-on job, and it’s worth every moment. I love staying on top of it for optimal nutrient uptake—it’s all about consistent effort and keeping that perfect range dialed in. Leaf Maintenance & Selective Defoliation These leaves are HUGE and gorgeous, creating a lush canopy that’s nearly too perfect! I’ve been taking a few leaves here and there, focusing on leaves that may be blocking light from reaching lower parts of the plant. Selective defoliation at this stage is key because it opens up airflow and allows light to penetrate deep, boosting energy distribution across the whole plant. Big, healthy leaves mean we’re getting excellent photosynthesis, but a gentle, strategic defoliation can guide that energy toward those developing buds. Leaf removal is all about balance, giving the plant space to breathe and thrive while still maximizing growth in flower! 🌐 TrolMaster + App – Real-Time Precision Huge shoutout to the TrolMaster system and the app—keeping everything in sync and at peak performance is honestly effortless with this ecosystem. The app provides a full overview of each environmental parameter, allowing me to make real-time adjustments as needed and track trends over time. The precision here is unbeatable, giving me complete control over temps, humidity, CO2, and VPD, ensuring my girls are in a controlled paradise 24/7. What I love most is how the app records everything automatically, so I always know exactly where things stand without having to keep separate records. If you haven’t tried TrolMaster yet, it’s a total game-changer for any grow setup! 💥 Shoutouts & Gratitude Massive shoutout to TrolMaster and Aptus Holland for powering this grow with tech and nutrition that’s second to none. And, of course, gratitude to Pro-Mix for the superb growing medium and to the seed banks behind the genetics. We’re running strong thanks to each of you. And to the whole community—thank you, everyone, from new friends to seasoned followers, lovers to haters. Your energy, whatever form it comes in, is all part of this journey, and I’m so grateful for it all. Special shoutout this week to my brother Daggadna—head over to IG and give him a follow! And if you’re loving the journey, remember to like, comment, and subscribe—it really helps the channel grow and reach others who may also dig this content! Discount Codes so you can save big on your next check out 💚💚💚 Kannabia - DOGDOCTOR 30% off SeedsmanSeeds - DOGDOCTOR 10% off CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 Friendly reminder all you see here is pure research and for educational purposes only Growers Love to you all 💚💚💚

9 SEMANAS Y YA VAN APARECIENDO SUS FLORES CON MAS GANAS SALUDOS CHICOS

I don't know what happened to her ... it's my first time growing up like this. We will see what happens in the future.

She is defo on the faster route forming flowers like crazy very happy lady very nice dark colour another week and she will get some haircut

Day 15 (7/1) - I missed day 14 but here are some hopefully good pictures of Day 15. First day of week 3 since sprout! I decided to FIM the CP just because it was growing so much taller than the XLK. I added a picture if the result. The FIMing actually took place on Day 14 so these photos are 1 day after. The XLK is staying low and getting a little bushy under rather but it’s still thriving so far. I still have not fed the plants anything other water with calmag added then PHed out so far. I think this one is going to be really compact. I don’t want to star real LST on it yet due to its low height. It’s about 4-5 inches. CP is thriving the day after its FIM session. The growth looks good to me..?? I don’t honestly know or have any experience to go off of. It grew a little taller and I was able to adjust the tie on it so more underleaf was exposed. This all took place on day 14. These pictures are the result. I like how much new green I see under after just one night. Day 17 (7/3) - Provided a few updated pictures. I won’t be able to provide another update until Sunday night so I will be posting another video at that time. FIMing has produced a lot of new growth in the lower nodes as I read it should do. I’m glad that it seems like the process went well. We will see how much they’ve grown on day 19. Day 20 (7/6) - I was away from the grow for a few days longer than I thought I would be but they still seem to be doing their thing. The soil was dry but that’s only about two or three days worth of drying out which is completely fine and the humidity was a little low but when I got back I refillEd the humidifier and everything seems to be going smoothly. Tomorrow will be the last day of week three and then after week four. I hope to see some height from these cause the tallest is still at about 6 inches due to LST.

The one plant that has always been under the cobbs is a couple of weeks ahead. They are all fattening up and the smell is great. Humidity in the tent has dropped, this is due to the outside weather changing and running a 6" fan 24/7. I may start the flush on the one plant, will decide in a few days. Cheers

Day 36 (1/11/21) Nutes: Veg A: 3.83 g/gal Veg B: 2.58 g/gal PPM: 1050 Water temp: 59°F pH: 5.7 Day 37 (1/12/21) Nutes: Veg A: 4.6 g/gal Veg B: 3.1 g/gal PPM: 1150 Water temp: 59°F pH: 5.7 Day 38 (1/13/21) Nutes: Veg A: 4.6 g/gal Veg B: 3.1 g/gal PPM: 1150 Water temp: 60°F pH: 5.7 Day 39 (1/14/21) Nutes: Veg A: 4.6 g/gal Veg B: 3.1 g/gal PPM: 1150 Water temp: 62°F pH: 5.7 Day 40 (1/15/21) Nutes: Veg A: 4.6 g/gal Veg B: 3.1 g/gal PPM: 1150 Water temp: 62°F pH: 5.7 Day 41 (1/16/21) Started running a RO:Tap water mix as recommended by Cropsalt FAQ instead of ph adjuster. PPM comes out about 20ppm higher but that’s no problem. Nutes mix: RO:TAP = 15:1 or 120oz:8oz Veg A: 4.6 g/gal Veg B: 3.1 g/gal PPM: 1350 Water temp: 62°F pH: 5.8 Day 42 (1/17/21) Starting flower tonight, 12 hours of darkness tonight and for the rest of the grow. Nutes mix: RO:TAP = 15:1 or 120oz:8oz Veg A: 4.6 g/gal Veg B: 3.1 g/gal PPM: 1350 Water temp: 60°F pH: 5.8

Buongiorno amici della canapa 🥦💚 Un grande complimento a tutti i vincitori de AWC🏆🥇 Eccoci alla 6ª settimana di fioritura💐 La Critical Lemon ⚡🍋 sta iniziando a far gonfiare per bene le sue belle cime innevate😍😋 TENT-X 🤖 le tiene sotto controllo egregiamente! 🔝 L'amica Gangi🐊 mi salta in testa ogni volta che apro la porta😱... Mi vorrà mangiare! Pensa di essere un drago di comodo! 😁

Semana de corte.

this week is a bit frustrating im having some small issue with root rot im off to the store to buy some drip clean from house and garden and ill be doing a water change today i will also topped them after fourth set of leaves day 7 system flush and cleaned. adjusted ppm to 750 i will be using sterile rez from now on as i dont want to battle with pythium. added drip clean and peroxide 30% as suggested by my local hydro store now water looks pristine onto week 5 tomorow.

Everything went well. Plants are drying , 18c/60%