Well she seems to be getting along very well for her 4th week in flower. Nothing exciting done this week i keep feeding her about 5 litres of water with 30ml canna A and 30ml canna B with a ph of 6.3 on average water schedule about every 24hours.

Started LSTing. We'll see what a few weeks does to them! Growth is vigorous in DWC. Noticed that the DinaMed's PH was dropping drastically over 24 hours. PPMs were way up at 1100. Diluted the solution by two thirds and re PHed her.

The plant seems to grow very slowly so lots of vegging time will be very beneficial for this one overall health smell and looks are doing fine and the plan seem to enter flowering stage and it's starting to create the beginnings of the buds. Day 44 the plant is very bushy and today I have to trim some more fan leafs a bit more mostly in the centre area of the plant so that I can encourage maximum light penetration. Thank you for reading I will continue to update have a happy grow

Grow-Report – Blütewoche 1 (Tag 1–7) Strain: Neon Runtz (Wizard Trees) Medium: Coco, 15 L Stofftöpfe Lichtsystem: Spider Farmer G4500 + UV/IR-Supplement Bars Steuerung: Spider Farmer Controller + Meross WLAN-Steckdosenleiste Lichtzyklus: 12/12 (18:00 – 06:00 Uhr) Grow-Philosophie: • Die ersten 2 Wochen der Blüte werden als Stretch-Phase betrachtet • Trichomen-Beurteilung ab Woche 10 • Ab Woche 8 kein Dünger mehr bzw. nur noch in minimaler Dosierung ⸻ Düngung Basisdünger: • Emerald Harvest Grow/Bloom + Cal-Mag • Dosierung: +0,25 ml/L über Schema Zusätze: • PowerZym (Hesi, enzymatisch): Unterstützt Wurzelhygiene & Substratabbau Gießverhalten: • Tägliches Gießen mit ca. 30 % Drain • pH Gießwasser: 5,8 / Drain: 6,1 • EC Gießwasser: 2,0 / Drain EC: konstant bei 1,3 → sehr gute Aufnahme ⸻ Lichtsteuerung – Supplement Bars IR-Licht (Spider Farmer Bar): • Aktiv: täglich 06:00–06:30 Uhr (30 Min nach Hauptlicht-Aus) • Funktion: End-of-Day-Treatment zur Unterstützung der Phytochrom-Umstellung → gezielter Stretch • Beobachtung: Erste Anzeichen von Internodienstreckung ab Tag 4, keine Überdehnung UVB-Licht: • Aktuell deaktiviert • Geplanter Einsatz ab Blütewoche 6 zur Steigerung der Trichomenproduktion • Steuerung erfolgt getrennt über Steckplatz mit Zeitschaltung (z. B. 20:00–22:00 Uhr später) ⸻ Pflanzenzustand & Entwicklung • Pflanzen zeigen aktives Wachstum, Aufrichtung nach Lichtstart • Keine Mängel oder Blockaden erkennbar • Drainwasser ist klar, Wurzeln vital (unterstützt durch PowerZym) • Geruchsentwicklung gering, aber sichtbar beginnender hormoneller Umschwung ⸻ Ausblick auf Woche 2 • IR-Licht leicht reduziert (z. B. auf 15 Min gegen Ende der Woche) • Vorblütenentwicklung und Struktur der Seitentriebe im Fokus • Düngeschema bleibt stabil • UVB bleibt weiter deaktiviert • Beginnende Wuchsberuhigung wird beobachtet → Übergang zur generativen Phase

Hey my friends and teachers I have had some minor light bleaching so I have raised the led lights as high as they go please tell me if that's cool or if I need to do more thanks guys

Good

It's officially week 4 of veg. What a ride! These ladies DO NOT give up and neither did i. Second grow, it is a learning curve. With all the growth stunned, i am a bit impatient. BUT the good news is the smallest have starting growing again. Anyways... 👽👉19/9 New automation program for this week. (See pictures for app screenshots for automation and datalogger) Temps - 21night/29day RH% - 60RH night / 68RH day My plan is to decrease the humidity at night, to increase the vpd. The same goes for my light output and nutrients. Changing the variables gradually over time. 👽👉20/9 I topped two more plants. The growth is gradually getting better. They should be ready for their first real feed tomorrow. (Only top fed them last watering) 👽👉21/9 ** First real feed. -They reacted well to a last lose dose top feeding, so this time i will give them a full feed, but same low dose. -Programmed new automation based on VPD Graf (see pictures) Set to 1.0 VPD. // Inkbird app, i am adjusting the RH% to the temp in the tent. -Did some experimental LST on one of the smaller ones. Dont have a co2 meter, but have co2 bag. But it has not been added as a variable to the climate calculations. 👽👉22/9 The new automation program has proven efficient and working(for now). Now its interesting to see the plants adapting the constant VPD. 👽👉23/9 Did some more LST work to keep the tallest ladies at level. 👽👉24/9 Visiting the ladies and checking up on the lst work. Tucking in leaves, plotting my next move. *Water day. they shared 5 Liter, where the bigger ones got more. PH 6.4 - EC 1.52 (Last water was PH 6.4 - EC 1.37) 1.5ml/L Bio heaven+Bio fish. (Next time they will get 2ml/L) 👽👉25/9 Turned up the lights from 75% to 100%. Temps are about to rise higher. might as well let the ladies get used to it.

Two of the plants had little bit of powdery mildew so I defoliated those leafs. Also sprayed them with baking soda, liquid soap and water mixture. Hopefully we don't find any more of that. Otherwise everything seems good they are healthy and growing well.

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Veg17, riego 1.3 EC y pH 6.1. Se hizo una muy pequeña defoliación y corte de algunos nodos para empezar a moldear la estructura. Veg18, un par de horas después del LST ya están mostrando la estructura deseada. Veg21, ajuste de LST. Veg22, riego 6.1 pH y EC 1.5.

Topped today and getting ready for transplant to 5 gallon pots. Two weeks under new Mars Hydro 3000 and new AC infinity fan. The four plants are listed above, enjoy the video, my first!

Hi everyone :-) This week the buds developed super ;-) All are beautiful 😍. Super genetics 👍. Blue Cheese pheno 1 is slowly coming to an end :-) This week I will start to use up the remaining nutrients and harvest in 10-14 days ;-) Everyone else needs something else :-) have fun with the videos, stay healthy 🙏🏻 and let it grow 🌱

7/28 some light lead pulling removing bottom area and sites that I fill be waste of time taking energy from the tops still RO water and tea every other week

16.06.2025 The Plant's had a ruff time with me recently! I lost one branch from Number 1 (the short one in the middle). And I had no Time to give them the needet attention. And I did my last Topping. So from now on it's just waiting till flower.

Without a doubt the best bud I‘ve ever grown! I have nothing but positive things to say about the genetics of this plant. This was my first mephisto grow so very impressed. Buds are sticky and dense after weeks of 90-100 degree weather. No signs of stress or slowing. The plants tackled every hint of def or toxicity with ease. Got a little less yield than I expected, but not complaining as quality is incredible!! Buds dryed for 6 days and cured for 7 as of review. Very dense and sticky. Yielded 5oz dry A-bud, 2oz dry fluff, and 15oz of wet trim. Pressed the fluff with a 11% yield. Rosin is budder-like and smooth. EDIT: Later edited on aug 17 to provide cure update. —-smoke report—- The finished cured bud reeks intensely of diesel, raspberry, and hash! The smoke itself is light on the lungs and heavy in texture. Smoke hints at flavors of raspberry and caramel with sweet notes. High produces strong headband and couchlock effect. Potency is high without a doubt. Smoking a few under 30 day cured bowls produces a high for a solid 3-6 hours even at a high tolerance level. As of mid-august, the cure is complete and stone has intensified. Feels waaay more indica this time. Fully cured bud can knock a seasoned stoner the fuck out. Blew my expectations out of the water This was my first mephisto grow and it made me a diehard fan. Can‘t wait to grow more later in the year!