Venga familia que ya viene la cosecha, que ganas que tenia ya de darles machetazo. No veas que pinta que tienen estas plantas. No son grandes pero si están bien gordas. No soy de plantar autoflorecientes pero e de comentar que con este cultivo e hasta disfrutado. Pronto la cataremos 💨💨💨. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Hasta aquí es todo , espero que lo disfrutéis, buenos humos 💨💨.

Day 67. Today I will be harvesting as I am out of space and other plant have out grown there tent. The mixture of smell as you open the tent is like a kid in adolescent without deodorant, just dank. When you smell them individually the purple haze is a really sweet and fruity smell. As for the ztrawberriez it's difficult to put my finger on it but it have fruits and citrus.

Hey folks, I'm finally back at it again. It took me a while for a couple of reasons: 1) I usually only grow in the winter. 2) I completely revamped my grow room after the issues I ran into with the last setup. 3) It took me a while to brainstorm exactly what I wanted to do. I bought these seeds from D.C. Seeds and was very pleased with the experience. I'm very happy to give business to a fellow American and Veteran. I've only ever purchased seeds from the UK in the past and that experience has been "dodgy" to say the least (not the vendors fault, but the transit). I've only ever grown photo's, but chose to go with all auto's moving forward. After calculating the intensity of my current light, with it being on a 20/4 rotation I'm very close to hitting 40 moles per day, at least directly under the light. It doesn't quite cover my 2' x 5' trellis. I'll eventually upgrade my light, but auto's should get me the best bang for my buck with this light. Also, I spent a pretty penny building this new grow room. The other obvious reason for growing auto's is their shorter seed to harvest time. I've got a small grow area, and never plan on expanding. Theoretically, auto's will allow me to produce the most out of my room. A few things about my grow room: 1) I lined the whole closet with 1/2" plywood and put that piece of ply the air intake/outtake/power as the divider between each side of the closet 2) The grow room itself has ply on all wall surfaces so I could mount stuff to it and paint it 3) The other side of the closet is my storage/prep/power distribution/etc. area. Maybe I'll take a pic one of these days 4) My last grow my carbon filter/fan was venting into the other side of the closet. This created a headache for a number of reasons. I tapped a 4" hole through the floor and am now venting into my crawl space below the house. 5) I moved to bubbleponics to speed up my grows even more. I will be removing the drip system once the roots hit the water in the res. 6) The larger res. will hopefully make my life much easier. Late in the last grow I could only fit 3 gallons of water in the bucket and that sucker was pounding down at least a gallon a day. That required too much micro-managing for me (both ph and refills). 7) I no longer have a fixed trellis with chicken wire. The trellis is held in place by dowels that I can pull out by hand. The short sides of the trellis have hinges on the bottom, so I can fold it and pull it out easy-mode. Lastly, I'll be using string for the trellis so come harvest all I have to do is cut the string instead of dealing with trying not to destroy buds pulling them through chicken wire (it takes forever). 8) I built a light diffuser on the other side of the air intake 9) My res. is on a motorcycle lift I'm using a drill to move up and down I have now started using Jack's as my primary nutes. They tell you the full break-down of each macro and micro nute, giving me more control and understanding. I think House & Garden is a good product, but when stuff goes bad it's more difficult to troubleshoot when you have no idea what each piece of their full lineup contains. I'm assuming it's kind of a proprietary type thing, which I understand, but knowledge is power. I am still using their Drip Clean (while the bubbler is going) and Roots Excelurator Silver, both excellent products. I'm still using Hydroguard, and will FOREVER. I'm a true believer now of why Hydroguard is necessary for any hydro application, IMO. I also purchased water soluble fulvic acid, but have decided not to use it for this grow....or at least while the bubbler is going (I'll elaborate below). Ok...now that all that is out of the way.... I really wanted to use my well water instead of R/O to make my life easier. Soooo....I filled up my res., and put two seeds in the system immediately. Nothing happened after 1 1/2 weeks. I finally opened up the cubes and saw that the beans had popped, but it looked like maybe I drowned them, or they ddin't grow straight up or something. For round two, I didn't change the water out, and decided to soak the beans for 24 hours in R/O water first. I had the exact same problem. I'm still not really sure what happend, but I suspect it was the well water. My PPMs were sitting at ~500 with the well water, which was probably too spicy for the beans just starting. Also, my well water is questionable (even though it's at 165ppm), but I won't elaborate further....it's a long ass story and I've spent an absurd amount of money on it. Lastly, I did put the Fulvic acid in, and it was very messy. I really want to avoid having to clean my res. Once the roots get big it will be a real pain in the ass to clean. I'm leaning towards not using the Fulvic acid this grow just to see how things go. I had 10 beans total of the Sour Apple and have already ruined 4. So here's hoping third times the charm. So, I went back to my tried and true method: 0) R/O water for everything. Ditching the well water idea. 1) Soak beans in R/O water for 24 hours 2) Paper towel method between plates on a heating mat 3) Once the roots pop, I place them pointed down in the hole of the rockwool cube 4) Hand water once a day by dipping the cube in the pre-mix of 1/4 strength Jack's and everything else I've listed above. This put my PPMs at 300...a way more reasonable value for starts. It's been exactly 7 days since I followed the above. It's probably hard to see but the cotyledons came up, and multiple roots have come out the bottom of the cubes....way faster than I've ever seen since I started growing. That means even though I'm doing my old process this already shaved at least a week off of when I'd normally put it in my bucket in the past.

looking good just few of the leaves have some brown spots and not sure what this is so up the notes A bit and see how it goes, done very little defoliation

Jour 101 flo+53 : Bon on arrive à la fin , je pense laisser encore 10jours pour les ambre au maximum et je vous dis ce que Ça donne mais ça a l air impressionnant

Defoliated again the leaves which were growing over Bud sites The streching phase has begun. I am corious how tall the plant will go.

Durant cette semaine elle c'est bien développé toujours aucun nutriments dans l'irrigation.

.

At the start of week 10 she is on point and on scedule going to up her nutes during the course of the flowerstretch So when stretch is over she is at full strenght nutes and adjusted nicely....🙏❤️ Day 64:Some clean up and transplant in her final 10L bucket Spiderfarmer SF1000 specifics: Chips Brand: SAMSUNG Veg Footprint: 3 x 3 ft ,Flower Footprint: 2 x 2 ft Spectrum: 660nm,3000K,5000K and IR 760nm Frequency: 50-60HZ Amp: 100.5W±5%@AC120V, 98.8W±5%@AC240V, 98.39W±5%@AC277V Draw power: 100.5W±5%@AC120V, 98.8W±5%@AC240V, 98.39W±5%@AC277V Lumen: 16439Lm±5%@AC120V, 16327Lm±5%@AC240V, 16292Lm±5%@AC277V I'm so pleased with this product i am placing the order link: https://www.aliexpress.com/item/4000171217867.html

December 2nd: Week 6 has started, hopefully last week of veg, defoliating, started feeding Sweet Candy, reducing humidity... more to come Tuesday night and it's end of week 6 or day 42, they are doing well, about 16 inches tall and bushy but I feel like another week of veg wouldn't hurt, hoping to get them all around 18 inches tall before I flip Comments and likes appreciated, stay high

Hey howsit guys Another week gone and one more closer and closer. These ladies are absolutely reeking and all 3 uniquely different . Ran into a bit of maintenance issues (dehumidifier fan seizing ) luckily I’m a bit of a hands on person and managed to save it. Can’t wait till they ready,I’m like a kid in a candy store 🍭. Btw can someone help me with that weird looking fan leaf? Will highly appreciate the enlightenment ⭐️ That’s it for this week guys happy growing all✌️

Switched to 12/12. No Problems with any of the strains so far. Upped the wattage to 400 all plants but the LSD liked it. LSD showed little sunburn but got used to it quickly. Feeding every once in a while and adding some Bloom Nutrients early.

Que hay de nuevo familia, mis green ak xL están dando sus frutos, no veas que bonitas que se están poniendo, floración algo lenta y variedad difícil de cultivar pero que si sabes realmente merece la pena.

🍋🥧🏎️ LEMON PIE AUTO BY FAST BUDS 🏎️🥧🍋 🍋 19.3 we have reached the first week of flowering, I removed Hesi TNT and add Hesi Bloom and irrigated 2 liters. the situation got a bit out of hand, I certainly exaggerated with the tops without considering too much the size of my vase, tomorrow I'll see how to continue, yeah! 🍋 20.3 ... 🍋 21.3 ... 🍋 22.3 ... 🍋 23.3 ... 🍋 24.3 ... 🍋 25.3 Today 2 liters of fertilized water, tomorrow I try to fix it and adjust the canopy to the same height ... yeah! ____________________________________________________________________________________ ❌❓Not sure where to buy your seeds? 😮 Fast buds literally ships all over the world, check out their site! http://bit.ly/FastBudsgood __________________________________________________________________________________ 📜 A look at the details of what I'm growing 📜 🍋🥧🏎️Lemon Pie Auto 🏎️🥧🍋 ⚧ Gender ▪️ Feminised ➰ Genes ▪️ 50% Indica / 50% Sativa 🎄 Genetics ▪️ Lemon Pie X Autoflowering Genetics 🚜Harvest ▪️ 450 - 550 g / m² 🌱Vegetation ▪️30 - 35 days 🌷Flowering ▪️ 30-35 days ✨THC ▪️ 24.0% ✅CBD ▪️ 1.0% 🏡Room Type ▪️ Indoor 🌄Room Type ▪️ Outdoor 🕋Room Type ▪️ Greenhouse 🎂Release Year ▪️ 2020 __________________________________________________________________________ 📷🥇 Follow the best photos on Instagram 🥇📷 https://www.instagram.com/dreamit420/ 🔻🔻Leave a comment with your opinions if you pass by here🔻🔻 🤟🤗💚Thanks and Enjoy growth 💚🤗🤟

9ª Settimana di Fioritura 💐💐💐💐💐💐💐💐💐 Oh my god 🙏🏼 Buongiorno amici 💚, avete visto che razza di fiori ha buttato la signorina MIMOSA Shot 🌼🎇 di HERBIES SEEDS?? Fantastica pianta davvero 🔝🤩😋

Las Ak parece que tienen un problema creo que tiene que ver con CalMag pero no estoy seguro, la otra no está afectada. Bajé la EC pero no se si tengo alguna carencia exceso u otra cosa. El dia 21 subo altura de luces al máximo el día 22 bajo la potencia de los quantum boards de 440w a 350w

Hi the plants have been on the balcony but unfortunately there wasn’t many sunny days i planted them 30th September, what you guys think? It will grow orwill start flowering soon? Any tips to make it grow faster from here?

Day 55/June 4, 2020: Amended topsoil with 10 tablespoons of Gaia Green 2-8-4 and 3.25 tablespoons of Gaia Green 4-4-4 organic slow release nutrients. Watered with PH 6.67

This girl is about finished here sister came out to about a 1 1/2 ounce hopefully this big girl is more overall good experience I don't have to say I will be doing these again because I already have 2nd and 3rd generation clones who am I tho I. Just a newbie 😌 lol

February 20, 2019 update: The good news is the babies are all growing, the not so good news is there seems to be a slight bug infestation. Since taking these pics and video I have sprayed them with a mild Neem Oil & Water mix (about 20:1), hoping that helps. The MediKush are doing great with some beautiful tight nodes.