🙈

Primera semana de floración, se continuó con nutriente de vegetación reducido y se empezó a la vez con el de floración también reducido. - Luz: Bestva Pro 1000W / 18 h/d -FloraNova Grow G.Hydroponics: 0.4ml/l - FloraNova Bloom G. Hydroponics: 0.3 ml/l - Armour SI G. Hydroponics 0.4ml/ - Everest: 0.5 ml/l Control biológico: -Solution (bioinsecticida generalista: Beauveria, Metarhizium, Lecanicillium y Cladosporium + esencia de ajo y chile). -Acaridox (bioacaricida: Metarhizium e Hirsutella + esencia de canela) - Scamin (control escama y cochinilla) Cladosporium Herbarum

Week 9 is here and we are looking at harvesting! After checking the trichomes of just the top colas, I decided this week I was going to harvest. I am updating this post after I have dried and harvested the plant so do not have much more details. I flushed the plant this week with Flora Kleen along with terpinator and microbes. I cut down the plants and hung them up in the tent to dry using a clothes hanger with clips I got off of Amazon. It took 10 days to dry the bud and my temps and humidity would fluctuate throughout the day and night. I stayed in the mid to low 70s for temperature and humidity was at 50% at first. Then I added a humidifier and had it dry in 60% humidity. Will update the rest in the harvest update.

The BruceBanner3 was nice to grow and we can absolutely her. she produced a lot of buds and brought us a yield of 65g dried. It tastes very delicious, much fruitier than the runtz. Despite a temporary lack of calmag and the wrong ph value, she rewards us with juicy buds You can really taste the terps, we had never smoked anything like it before!

Day 69: Watered each plant with 1.5L with nuts 1379 ppm, 2951us/cm, 2.9 EC (1 purple punch, wedding Cheesecake) 1391 ppm, 2959 us/cm, 2.9 EC (gorilla cookies) 1L 319 ppm, 678 us/cm 0.6 EC (3 strawberry banana and 2 purple punch) (2L each) 3 different feedings for the 10 plants Still flushing all the strawberry banana and 2 purple punch with flawless finisher, 2ml per L. (1st week flawless finisher, 2L each, 2nd week clear water, 150L each pH tap water) Day 71: I've been struggling with the humidity, always around 70%, I can't turn the lights off at the moment. I lost one of the main fans during 2 days, and I found mold on all the tops on one purple punch and on the smaller strawberry banana as well. First timing having this issue! High humidity plus not enough air circulation equals this. Mistakes happen for a reason. Need to start rethinking my whole air circulation, exaustor, fans, etc etc. I removed the infected buds, I used a magnified glass to help me do the job better. I did everything like the book. Already have 3 fans on the tent, let's see how it goes. Humidity between 65-75% Day 73: Watered each plant with 1.5L with nuts 1458 ppm, 3101us/cm, 3.1 EC (2 wedding Cheesecake and 1 gorilla cookies) 283 ppm, 602 us/cm 0.6 EC (3 strawberry banana, 3 purple punch and 1 wedding Cheesecake) (2L each) 2 different feedings for the 10 plants Still flushing, 1st week flawless finisher, 2L each, 2nd week clear water, 150L each pH tap water) Everything running smooth, they are starting to show the colors from the flush I've been doing. Day 75: Watered each plant with 1.5L with nuts 290 ppm, 617 us/cm 0.6 EC (3 strawberry banana, 3 purple punch and 3 wedding Cheesecake) (2L each) Day 77: Watered each plant with 1.5L with nuts 1811 ppm, 3810 us/cm, 3.8 EC (gorilla cookies) 253 ppm, 538 us/cm 0.5 EC (3 strawberry banana, 3 purple punch and 3 wedding Cheesecake) (2L each) Still flushing... Going to cut some of them this week.

Hi friends, So I guess I was being really impatient because the bigger girls have begun springing out trichomes!! I can see them deep within the bud sites and are slowly stretching out on sugar leaves. I've noticed that this plant doesn't produce too many trichomes on the bigger leaves so don't let that fool you if you come across that. My girls look frosty on the actual bud sites. Tried to get good pics, will try post more tonight. Other than that, the fast yellowing from previous issues have halted and yellowing seems to be taking a natural course from here. Leaves are dying off but seems that's just the plant doing its thing and getting rid of what it doesnt need. So excited the trichomes came through. Hopefully a few more weeks from here or so. Stay safe!

Lampe ca. 90% Unfassbar! Was die hinlegen ist erstaunlich, ich hatte nicht erwartet, dass Coco so krass performt. 😎 Die vorderen 2 haben die 1 m Marke erreicht, die hintere ist aber dicht auf. 🌱 Deshalb haben wir aber ein Problem mit der Lampe, da diese nur noch 23 cm vom obersten Bud entfernt ist. 🍀 Ich will eigentlich diesen Run nicht trainieren, aber denke, so langsam muss ich die runterbinden nur dafür fehlt der Platz… Vielleicht habt ihr ja ein paar Tipps. CO₂ ist auch schon aktiv.❤️ Mo: 4L Dünger: Canna Coco A&B = 1 ,5ml/L CalMag = 0,7 ml/L Cannazym = 0,7 ml/L Boost = 1,5 ml/L pH: 5.78 EC: 1.6 Drain: Di: (Fotos)

We continue to mix our own nutes, but I started also testing Nutra Hydro . One rack only for now. Next project is upcoming for organic beds or huge pots. STAT TUNED BROTHERS ANS SISTERS ! Grower love ❤️❤️❤️!!!!

Bloom 37 The weather is starting to get colder. Unfortunately, I cannot raise the temperature. but it's still going well for now. next watering overdrive.

Gracias al equipo de Sweet Seeds, Marshydro, XpertNutrients y Trolmaster sin ellos esto no sería posible. 💐🍁 Sweet Mandarine Zkittlez F1 FV : Genética feminizada y fotodependiente de floración ultrarrápida. Primera generación filial (F1) resultante del cruce entre un clon élite de Zkittlez (muy potente y resinoso, con un marcado aroma tipo Sour Diesel cítrico, entre naranja y mandarina) y nuestra Sweet Mimosa XL Auto (SWS94) que también tiene tonos aromáticos cítricos entre naranja y mandarina. El resultado del cruce es una vigorosa variedad híbrida fotodependiente muy resinosa, potente y aromática. El aroma de esta variedad es delicioso, con tonos Sour Diesel muy especiados, tonos de naranja y mango, fondo amaderado y lejanas pinceladas frescas como de pino o hierba recién cortada. Algunos individuos pueden mostrar flores y hojas con tonos púrpuras y rojizos al final de la floración. El efecto es enérgico, alegre y estimulante de la concentración y la creatividad. 💡TS-3000 + TS-1000: se usaran dos de las lámparas de la serie TS de Marshydro, para cubrir todas las necesidades de las plantas durante el ciclo de cultivo, uso las dos lámparas en floracion para llegar a toda la carpa de 1.50 x 1.50 x 1.80. https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 💻 Trolmaster Tent-X TCS-1 como controlador de luz, optimiza tu cultivo con la última tecnología del mercado, desde donde puedes controlar todos los parametros. https://www.trolmaster.com/Products/Details/TCS-1 📆 Semana 2: Fantástica semana, estan creciendo de una forma espectacular gracias a la ayuda de @marshydro, @xpertnutrients y @trolmaster. Se puede apreciar un tercer nudo aunque la aplicación de cola de caballo y el estar en una maceta pequeña ha influido en el tamaño de ella, se recupera muy rápido 😁. Esta semana espero trasplantar a la maceta definitiva. Potencia de la lámpara: 50%

21/10/22 dia 105 de la floracion y dia previo al comienzo de la semana 16.. En esta semana 15, he retirado bastantes hojas amarillas, no se agrego ningún aditivo. En la semana siguiente lo que se hará es comenzar con el lavado de raíces con flawess finish de advanced nutrients, comenzare con 2ml x litro de agua y dejare drenar un 20% del riego y cuando seque volveré a repetir dicha operación.

Gracias al equipo de Divine Seeds, Marshydro y XpertNutrients sin ellos esto no seria posible. 💐🍁Fractal: La semilla de marihuana Fractal es una cepa especialmente psicodélica que Semillas Divinas desarrolló para experiencias esotéricas y místicas, meditación y creatividad. La potente y vívida Skunk#1 fue cruzada con una pegajosa Afghani Indica, y el resultado es ahora conocido como Fractal. Este exótico híbrido es resinoso, picante y productivo. La mejor opción para el cultivo comercial: un compromiso entre mayores rendimientos y maduración rápida. En interiores se espera una altura de 1,70 m, en exteriores las plantas crecen hasta 2 m. Fractal se adapta a todo tipo de entorno de cultivo: cajas de cultivo, instalaciones hidropónicas o aeropónicas, plantaciones exteriores, balcones, terrazas e invernaderos. Para un mejor rendimiento se recomienda entrenar a las plantas de Fractal para ampliar su estructura y limitar su crecimiento vertical. Usar ScroG o SoG, LST, FIM o topping. Fractal tiene una inmunidad inherente al moho y a las plagas de insectos, pero como sus colas son gruesas, proteja sus plantas del aire viciado. También durante las semanas de lluvia su plantación puede necesitar ser cubierta. Listo para la cosecha al aire libre en octubre. Grandes y densos cogollos. Los cogollos de marihuana de la variedad Fractral huelen a hachís y algo a tierra, desprenden cedro y notas afrutadas al romperse. Mida su porción con cuidado: su potencia está por encima de la media. Con Fractal experimentas un apedreamiento general que te hace sentarte o frena tu movimiento. Perfecto para pasar una noche junto a una hoguera. Es mejor consumirlo por la noche. 🚀🌻 Consigue aquí tus semillas: https://divineseeds.net/es/fractal-fem/ 💡FC6500: Eficiencia líder en el mercado: la lámpara de cultivo LED FC-E6500, que ostenta un estatus líder en el mercado, es una solución rentable con un PPE de 2,8 µmol/J y un rendimiento máximo de 2,5 g/vatio. Ofrece un PPF alto de 2026 umol/S y es adecuada para una cobertura de vegetación de 1,50 m x 1,50 m y una cobertura de flores de 1,20 m x 1,20 m. Iluminación versátil y uniforme. https://marshydro.eu/products/mars-hydro-fc-e-6500-730w-commercial-led-grow-light/?gad_source=1&gclid=Cj0KCQjw1qO0BhDwARIsANfnkv9IIrYSbmJqz8PqpJOIyWwJfp5bc3SGJgUV68USLQ4tjmXDYwoBuAsaAue3EALw_wcB 🚥 MarsHydro ADLITE UV/IR/RED: Para lograr un crecimiento óptimo de las plantas y maximizar los rendimientos es un arte simple que depende en gran medida de las condiciones ambientales adecuadas. Reconociendo las limitaciones de la iluminación natural y las soluciones de iluminación tradicionales para satisfacer estas necesidades únicas, lanzamos ADLITE. Estas luces especiales UV, IR y roja están diseñadas para llenar áreas del espectro, proporcionando las altas longitudes de onda que las plantas necesitan para un crecimiento y desarrollo óptimos. Consigue aqui tu Adlite: https://marshydro.eu/collections/adlite-supplemental-lights/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 📆 Semana 1 Un comienzo explosivo en solo 3 dias que llevan en floracion gracias a la nueva iluminación de mi patrocinador Marshydro, gracias al Adlite y como no a la gran gama de nutrientes de XpertNutrients. Continuo con las dosis de nutrientes recomendadas por el fabricante, esta vez el olor es penetrante y eso que todavia no tiene desarrollada las flores. En algunos ejemplares se pueden apreciar lindas preflores hembras.

Week 10, 8-14 July 2024 8-14 July - Observed and let the plant grow. 9 July - Did a light defoliation of older leaves. Pablo continues to stack and swell in bud growth. I’m impressed with just how big her buds are getting. Devine Seeds has some really good genetics here, and she still has about 5 more weeks to go. I see no problems what so ever up to this point. 🍶 8 July nutrient solution changed 🍽️ 8 July feeding schedule updated 💧 Using reverse osmosis water with EC/TDS at 0 🐉 Nutrient Solution EC 2.7 at 74 degree F 🔆 Light power at 80%, DLI 40 canopy coverage at 12hrs 😤 Using PYPABL, Air Pump, 400GPH That is it for this week. Thanks for the look, read and stopping by.

######################################### HARVEST (Day 110 / December 21) ######################################### ----------------------------------------------------------- GROW SUMMARY ----------------------------------------------------------- Grown in 4x4 tent - but I only used 2x4 because of heater and dehumidification but each plant averaged a 2x3 canopy. Each plant had a dedicated light, Sage 2 used the HLG 300 V2 Rspec and Sage 3 used the CMH 315. It's not an accurate comparison of lights because there was some overlap but I'm just utilizing my resources the best I can for this dedicated autoflower tent. The plants were grown in hydroponics using a custom two-site PA hydroponics clone RDWC system with Advanced Nutrients Sensi Coco line, Microbial Mass and Orca for beneficials. All around a pretty easy grow and things went very well. Sage #3 had an issue just after stretch, and I think I burnt it a bit when the CMH was at 22". I also experimented with a single water change which was only performed when switching to bloom nutrients around week 7 and turned out surprisingly well - see the results below. It's always fun to see the two contrasting phenotypes side by side. ----------------------------------------------------------- HARVEST ----------------------------------------------------------- From day 106 to day 110, I just stopped feeding and let the ppms run down. No dark period and no flush. On day 110 they were chopped. I probably could have let them go a bit longer, but my concerns were growing with Sage 3 and the sugar leaves being brittle and flacking off onto lower buds promoting bud rot. The smell of this flower on the plant was funk and was hard to control the funk... even with a carbon filter. Trichomes are slightly amber, mostly milky overall. I'm convinced hydroponics can add a couple of weeks of veg time to the run compared to coco/soil. Cutting the Scrog net was required. ----------------------------------------------------------- DRYING ----------------------------------------------------------- The plants were dried in a 3x3 tent, so I had to cut the plants in 1/4 sections to fit in the 3x3 drying tent for a slow dry. Branches were hung to dry on burlap twine in a tent in complete darkness, branches upside down. The temps were dialed in at 60F by pointing AC at the intake vent on side of the tent. Humidity was dialed in at 63%/60F for 24hr, 62%/60F for the next 48hr. Then 60%/60F for the third day and onward. Ambient RH in my house is 30% due to winter so I had to use two humidifiers and an Inkbird controller to add humidity to the room and block the humidity streams from hitting plants directly. AC Infinity T6/S6 exhaust and intake fans were on the setting of '2' during drying until day 8, then I could turn down to a setting of '1' once the plants were not transpiring excess moisture. I pulled the branches to trim as they were ready around starting around day 12. ----------------------------------------------------------- TRIMMING ----------------------------------------------------------- I trimmed each branch as it was ready but there were times when I pulled more than I could trim without being interrupted so a few branches did overdry on my trim table due to the low ambient RH due to winter. Very few fan leaves on branches, so most trim was all sugar leaves. I went tight with trim to ensure a better flower product and more supply for edible totaling in over 11 ounces of trim product. ----------------------------------------------------------- CURING ----------------------------------------------------------- Flower product was transferred to 1L mason jars averaging 35g of product per jar. I added a mini hygrometer to each jar and boveda/boost 8gr humidity pack. The RH averaged 62-64% when trimmed flowers went in jars. I started by burping once a day for the first seven days, once every other day for the next seven days, rolling jars often. The burp was only for 3-5 second for air exchange. Because the flower product was already at almost 62% when packaged in jars, quite the contrast from drying in summer conditions, I only needed to burp once per day and mold really wasn't much of an issue due to low humidity in winter. ----------------------------------------------------------- YIELD ----------------------------------------------------------- * Weight calculated at 62% humidity after 10 day cure. ============================== FLOWER PRODUCT ============================== Sage 2: 301g (10.75oz) Sage 3: 377g (13.46oz) ---------------------------------------- Total: 670g (23.93oz) ============================== TRIM PRODUCT ============================== Sage 2: 204g Sage 3: 135g ---------------------------------------- Total: 327g (11.67oz) **I went tight on the trim for better flower product and sufficient supply for edibles, and is calculated in overall yield. ** All major fan leaves, stems, and branches removed from trim product. ============================== TOTAL OVERALL YIELD ============================== Flower: 678g (24.21oz) Trim: 327g (11.68oz) ---------------------------------------- Total: 1005g (35.89oz) (2.24lb) ============================== SPACE YIELD ============================== 1005g / 12 sqft (3x4 canopy) = 83.75g per sqft ============================== WATTAGE YIELD ============================== 615 Watts / 12 Square Foot (3x4 canopy) = 51.25 watts per sqft. 1005g / 615 watts = 1.63 grams per watt ----------------------------------------------------------- PRODUCT TEST ----------------------------------------------------------- On day 10 of cure, I tested the flower and passed some to a few friends for their input. Feedback was positive. One little bud was given to a friend and he reported it stunk his entire car. Sticky, trichome-covered fire! Smoke is smooth, no cough. White ash. The 60/40 (sativa/indica) is a blend that is on point. Sage Scout definitely is a heavy hitter; upwards of 3.5 hour noticeable head/body change with no couchlock at the end. In regards to flavor and smell, it's not fully there yet on only day 10 of cure. The flavors/scents are still muted but I expect the flavours to prevail after 6-8 weeks of curing. Very funky and strong smell that bursts past the mason jar lids. Piney sweet scent. ----------------------------------------------------------- REGRETS ----------------------------------------------------------- Honestly, I only have two regrets with this run. 1. More aggressive lolipopping! I just feel if I had lolipopped more, I would have had a denser product overall. The flower product is indeed dense, and all in all, I'm happy with the result, but it's I'm adding as a reminder for the next run. I need to be more selective. 2. I slacked on the training of Sage #2 due to the hard-to-reach factor which probably affected about additional 1-2 oz of yield. ----------------------------------------------------------- NEXT RUN ----------------------------------------------------------- 1. I’m was very happy with Microbial Mass product in combination with Orca. Once again, I was overall happy with Advanced Coco blend for RWDC. I went with Coco product because Coco is similar to hydroponics, the AN Coco line just has added Calmag to it. I didn’t really see any issues with the AN Coco line and I like the autonomous factor of AN sensi products because my photoperiod tent takes some of my attention, so it is nice to have this autolower tent on auto-pilot for the majority of the grow. 2. When harvesting, I did find a few spots of concern in the root system, so I will definitely upgrade the pump from 250gph to a 400gph for better flow to combat that issue. 3. My experiment with a single water change when switching to bloom nutrients was a surprising result. Sage 2 (purple pheno) performed well with no deficiencies which I had trouble sorting out the deficiency on Sage 3. I continue to wonder if it was salt build-up, but it seemed to start shortly after the change to bloom nutrients so maybe it was a nitrogen/calmag issue. I may add an additional water change mid-flower (week 11) to the next run and see if it makes any difference is the same conditions happen. 4. I'll also like to move the two-site system to the front of the tent for better accessibility to train the plants. 5. I'm also looking at the floorplan of the tent and I think I can run a single system in parallel next to this two-site system and still have room for heater/dehumidifier and still keep accessibility for training. ----------------------------------------------------------- FINAL THOUGHTS ----------------------------------------------------------- Night Owl genetics has performed once again in my RDWC setup. I also feel a dedicated light for each plant really helped improve the yield. If I calculate a 2x3 space for each plant, with a total of 615 watts / 12 sq ft, running at 51.25 watts per square foot is the result. In regards to gram per watt, I've calculated the result is nearly 1.63 gram per watt when using 1005g / 615 watts. My goal was a pound per plant, I was happy to exceed that goal line with autoflowers with 2.24lb total yield. ----------------------------------------------------------- THE END ----------------------------------------------------------- Thanks for checking out my diary! I typically journal in my notebook but I put some time and effort into documenting my grows on this platform in hopes it will help a new or experienced grower with their DWC journey. Any questions or suggestions are welcomed. Happy growing!

After two weeks of stretching, I practice defoliation, removing the nodes below. I switch the lamps to 100%.

Hi liebe Community and Welcome Back! 💚🌱 We proud to present the second Strain from Good Times Genetics! Die Wuchsform der Pflanzen wirkt bis jetzt sehr homogen, es ist zu beachten, dass natürlich die einen etwas schneller wachsen, wie die anderen. Auch die Stielbreite unterscheidet sich etwas. Insgesamt wirken die Jungpflanzen allerdings sehr kompakt, was eine gewisse Indica Dominanz vermuten lässt. Das ist auch so gewollt. Ich werde immer wieder verschiedene Pflanzen der gleichen Zucht dokumentieren und nach der Geschlechtsbestimmung dann Herausfiltern, welche zwei Pflanzen für die Fertigstellung des Diaries in Frage kommen. Die Wachstumsbedingungen im Growzelt sind weiterhin am Optimum und Stabil: ——————— 🌞 Temp: 23°C 🌚 Temp: 20 °C 💨 RH: 58% VPD: 0,86 kPa 😎PPFD: 330 mqm ——————— Stay Tuned! 💚

Erster Grow, ohne Schnickschnack. Den Growroom haben wir aus/in unserem Gästeklo gebaut. Heizung ist drin, Lüftung ist drin, alles gekachelt. Wir haben einen Boden eingebaut, mit Pressspan-Platten auf einer billigen Holzkonstruktion. Maße vom Gästeklo sind 90 x 110 cm. First grow, no frills. We built the grow room out of/in our guest toilet. Heating is in, ventilation is in, everything is tiled. We installed a floor with chipboard on a cheap wooden construction. The dimensions of the guest toilet are 90 x 110 cm.

And another week has passed, they are bigger but didn't do the growing I expected them to do. I think something stressed them for a couple of days, where the XL Runtz took the stressing factors a bit better. I'm trying to find out what it could have been and preventatively softened the light, lowered temps and it seemed to recover. Maybe I pushed the SP-3000 by Mars Hydro a bit too hard... We also had some white pointy bits... With a lot of trust in this growing method, after the previous grows, and the plants look overall happy I'm not too worried. The soil will balance out if just don't push the lights too hard. It's a matter of adjusting and finding sweet spots and limits. So I started bending a little and this week will bend over the tops, to further the LST which is about the only thing ill do and maybe some defoliation after 3rd week of flower.... Thank you for checking out my diary again!