pineapple kush is doing good she reacted well to being tied down and bushed straight back up gave her a good defoliation and had to tie her down more and bend a few tops over will be no more silicon used and will be adding buddy next week thanks for reading happy growing guys

OG 4Q24 Seedling Bolt III Orangegasm (Fem) [ IRIE Genetics ] 12/12 @ Bolt (Day 21) Germination: 20 November 2024 #3A Earliest Harvest Date: 9 February 2025 #3B Latest Harvest Date: 19 February 2025 _________________________________________ Start of Week: [Wed Dec 25, 2024 CR2 4Q24 1:B:1:1] End of Week: [Tue Dec 31 , 2024 CR2 4Q24 7:B:1:7] OrangeGasm Fertigation: Max EC: [ 2.4, mS] _______________________________________ Week’s Objectives: - IFF We’re still HAND WATERING, ADD First Resin Bloom to Full @ 4ml/gal. - We can’t replace RLA’s Carbon Component with/out ~300 ml/Gal Ful-Power (Fulvic Acids) We WON’T be doing that. Rather, we’ll see a diminution of Carbon provided, look for 3-5 days to stabilize after switch to auto-irrigation. EC Starting Water: ec: 0.0 mS/cm, pH: ~7  __ Wed Dec 25, 2024 # Christmas Day OG 4Q24 15:B:2:1 Watered late tonight (~2200). - NO RUNOFF - Barely the beginning of Burnt Tips - Grew 2” overnight - raised light 2”, Canopy Distance is 19.5 @ 77% (770 ppfd) After Watering - With REDUCED Light, Plants are FRISKY Leaves raised (but no fingers in light sockets) - # We’ve got Pistils (Noted Yesterday) - Ceasing Foliar . . . IT’s been good. ;-} Runoff: NO RUNOFF Fertigation: - [x] Primer A&B: [ 10.2, ml] - [x] CalMag Fuel: [ 6.8, ml] - [x] Silica Skin: [ 6.8, ml] - [x] Lush Green: [ 5.1, ml] - [x] Root Anchor: [ 5.1, ml] - [x] Peak Bloom: [ 5.1, ml] - [x] Photosynthesis Plus: [ 6, ml] - [x] Quillaja 60 Powder: [~scant~] - [x] SLF-100: [ 5, ml]  Standardizing Lighting __ Thu Dec 26, 2024 # BOXING DAY OG 4Q24 16:B:2:2 Scotoperiod: [ 12, h] EC: [ 2.4, mS/cm] Temp: [ 79, °F] RH: [ 68, %] VPD: [ 0.85, kPa] NOTE: If we’ve no runoff today, Water AGAIN at Midnight, Install Auto-Fertigation Tomorrow Raised Light 6 Clicks - Grew 2” Overnight - Light Distance ~20” @1900 - Fertigation Fertigation: - [x] Primer A&B: [ 10.2, ml] - [x] CalMag Fuel: [ 6.8, ml] - [x] Silica Skin: [ 6.8, ml] - [x] Lush Green: [ 5.1, ml] - [x] Root Anchor: [ 5.1, ml] - [x] Peak Bloom: [ 5.1, ml] - [x] Photosynthesis Plus: [ 6, ml] - [x] Quillaja 60 Powder: [~scant~] - [x] SLF-100: [ 5, ml] IPM: - [x] Zymes Bomb - Top to Bottom, including Airpot Sides.
Foliar DRENCH w/ Zymes at 1:31 water dilution. Drenched top and bottom of leaves, stems, JOINTS, Coco Top, and spraying down ALL Airpot Side Holes, and BOTTOM OF AIRPOT. Letting the girls run up to 82°F, RH @ 69%, VPD ~9. Plants are HAPPY w/ EC: 2.4, w/ Moderate High Lighting (~770) If they’re happy before lights out, and I know it - Let’s raise light to 80% (800 µMol/m2/s), adjust airflow for overnight Temp (Humidity Down). And call it a night. After Raising light to 83%, REDUCED again to 77% @0600 __ Fri Dec 27, 2024 OG 4Q24 17:B:2:3 Runoff: [ 500, ml], EC: [ 1.7, mS/cm] Raised Light 6 Clicks (Grew 1.5” Last Night). Light Distance back to ~20” 1.5 Gal fertigation - let’s do 1900 & 1200  Fertigation: 1.5 Gal # 2000 & 0100, .75 gal Each, EC: 2.5 - [x] Primer A&B: [ 14.8, ml] - [x] CalMag Fuel: [ 9.9, ml] - [x] Silica Skin: [ 9.9, ml] - [x] Lush Green: [ 7.4, ml] - [x] Root Anchor: [ 7.4, ml] - [x] Peak Bloom: [ 7.4, ml] - [x] Resin Bloom: [ 4.9, ml] - [x] Photosynthesis Plus: [ 9, ml] - [x] Quillaja 60 Powder: [ 0.125, tsp] - [x] SLF-100: [ 7.4, ml] After 2:30 Feeding - Raised light to 83% __ Sat Dec 28, 2024 OG 4Q24 18:B:2:4 Temp: [ 82, °F] RH: [ 68, %] VPD: [ 0.96, kPa] Light Distance: [ 19.5, “] Fertigation: RLA Heavy, Flower Week 3; EC: 2.4 Notes: - Evaluate 83% Dimmer at Lights On - Back off to 77% if any indication of Light Stress - Let’s ramp to EC: 2.7 mS As max. Beyond here, we probably don’t have sufficient CO2. Light Intensity (IDEAL): 83% # ~830 µMol/m2/s EC: 2.4 422 ml/plant, runoff, EC 1.5. Fertigation: 1.5 Gal # 2000 & 0100, .75 gal Each, EC: 2.5 - [x] Primer A&B: [ 14.8, ml] - [x] CalMag Fuel: [ 9.9, ml] - [x] Silica Skin: [ 9.9, ml] - [x] Lush Green: [ 7.4, ml] - [x] Root Anchor: [ 7.4, ml] - [x] Peak Bloom: [ 7.4, ml] - [x] Resin Bloom: [ 4.9, ml] - [x] Photosynthesis Plus: [ 9, ml] - [x] Quillaja 60 Powder: [ 0.125, tsp] - [x] SLF-100: [ 7.4, ml] 420 ml/plant op Crinkly LOWERS - EC Too High Too Fast? __ Sun Dec 29, 2024 OG 4Q24 19:B:2:5 EC: 2.3-2.4 The Max Hydro comes in at 2.36 EC. RLA Hydro Chart set 3.4. How Can Be? DROPPING SILICA SKIN from RLA Hydro (Eliminate Brown Patina, and Small Orifice Build-up) RLA Hydro  Nutrient Element Ratios ppm mS/cm NER N 262 0.5 21.8% P205 143 0.3 11.9% K20 476 1.0 39.7% Ca 214 0.4 17.9% Mg 48 0.1 4.0% S 57 0.1 4.8% Si 0 0.0 0.0% C 333 TOTAL 1533 2.4 100.0%  
RLA - Full - [x] Complete Irrigation Install Defoliation I We want to eliminate All Vegetation from TOPPED NODE (3) Down. - [ ] Count NODES FROM SPLIT - [x] Measure Plant Heights: 11 - 17” - [x] Remove Each Pot and Trim OUTSIDE OF TENT (Get it RIGHT!) - [x] Can we adjust the pot positioning to get ONE UNDER CANOPY Fan? - [x] Eliminate FANS and Growth tips NODES 1 - 3 (3 is TOP SPLIT) - [x] Eliminate FAN LEAVES from First Node of MAIN STEMS - [x] INSTALL DRIP RINGS (No Manifold, Yet) - [x] Apply LABEL to Each Plant - [ ] Consider Eliminating FAN LEAVES from Second Node of Mains _______ Fertigation: 1.5 Gal # 2000 & 0100, .75 gal Each, EC: 2.5 - [x] Primer A&B: [ 54.1, ml] # EC: 2.4 MAX - [x] Photosynthesis Plus: [ 24, ml] - [x] Quillaja 60 Powder: [ 0.25, tsp] - [x] SLF-100: [ 15, ml] Time Set Initiate Complete Event 1 18:45 18:45:25 Event 2 20:05:00 20:05:25 Event 3 21:25:00 21:25:25 Event 4 22:45:00 22:45:25 Event 5 00:05:00 00:05:25 Event 6 01:25:00 01:25:25 Event 7 02:45:00 02:45:25 Event 8 04:05:00 04:05:25 Event 9 05:25:00 05:25:25 CHANGED TO 25 SEC EVENT (from 20) Tuesday - / / / __ Mon Dec 30, 2024 OG 4Q24 20:B:2:6 - [x] Harvest Dehu Water Continuing to RAISE LIGHT ~ 2”/day (6 Clicks of the support ratchets). Runoff: - [ 422, ml, plant!!!!] # Reduced Event duration to 20 Seconds (from 30). - [ 1.4, mS/cm] Lowering light to 70%, see if lower fans relax. They’re electric. :-). They relaxed. Inner fans surrounding apical stems are laying @ 30°, rather than Reaching for 60°. I have perhaps been overnighting. HUMIDITY IS CRANKING. It’s impossible to get VPD above ~8.3! Trying to keep humidity below 68 drives Temp below 78. I forgot about the part. ;-( Dehumidifier is ON, Doors are Closed, Room Vent is CLOSED. Dehumidifier is delivering 50%RH to the room. Orange Gasm is quickly filling the air with moisture. At MIDNIGHT, Raised light to 77% ( ~770 µMol/m2/s] pH Adjusted 2 Gallons of Filtered Tap to pH: 7.2, EC: 0.3 (Used for Dilution when refreshing reservoir with DEHU and Fresh Supplements. __ Tue Dec 31, 2024 OG 4Q24 21:B:2:7 @0630 Took a peek in the tent. SCANT RUNOFF @ 20 Sec Feed Events. JUST Touched TIPS (Burning). Bumping Fertigation Events to 25 Seconds, after Feeding 9 * 5sec (45 Sec) To bring DAYS delivery to 25 Seconds. Check Reservoir: - We’ve 4 - 5 Gallons. @LIGHTS ON - Reset Light Height - Reduce light to 73% (See if we can avoid more tip burning) Harvest Dehu: - [x] Amount: [ 5.7, l] - [x] Primer A&B: [ 27, ml] # For EC: 2.4 mS/cm, Nailed it, First Try. ;-} Orange Gasm likes to SPREAD when Topped. - Which makes her a funny candidate for SOG. ;-} 

I know that it may seem like a lot of nutrients at first. It’s not. A lot of those mycorrhizae ingredients are mixed into my soil well before the germinated seed goes into the pot. I make my own mix of soil using some of those ingredients. I like to use the great white mykos because of its powders consistency. Makes it easy for a clean transport from germinated bean to its forever home. For watering, they have been given only plain RO water with a neutral ph. Just yesterday I gave them a little tiny mix of Medusa’s magic, Zeus juice, and Gaia mania. I have used Oregon’s only brand products for a while now and I absolutely love them and better yet, I understand them. They have responded super well already to their first drink of bottled nutes with a ph of 6.3 . I’m keeping a RH between 50 and 60%. I’m also keeping a temp during the day at around 78-81°f. Right now I’m not worried about a night time temp but I do run cooler lights for about 4 hrs every day, dropping to around 70-75°f. Eventually I will add my second light boosting me from 600w too 1200w. Also they will begin a 20-4 hr light cycle. I find these autos do amazing with a little rest for 4 hrs. Allows me to pull more resin and color in later stages of life by dropping the temp lower than usual with the lights off. So please if you will, stay tuned and I’ll have much more info and much better videos and pictures for you to all enjoy. Thanks for looking! ✌️🏻

Everything seems to be going slow still. Did one last heavy defoliation to get good airflow going. I added the Ts1000w from Mars Hydro. I’m still feeding the usual 3.0EC from Floraflex. Smell is more on a minty side I can’t really describe it. Other than that nothing else. See you all next week.

Harvest time for my solo cups girls 😉

Week 7: Mastering VPD with Precision and Control As we delve deeper into the cultivation journey with Panty Punch Auto, Week 7 brings us face to face with one of the most critical factors in plant health and productivity: Vapor Pressure Deficit (VPD). In this report, we'll explore the intricacies of VPD and how the innovative Tent-X controller, coupled with the TM+ Pro app, empowers us to achieve optimal environmental conditions for our thriving botanical companion. VPD, often referred to as the "Goldilocks zone" of plant growth, represents the ideal balance between temperature and humidity. This delicate equilibrium influences transpiration rates, nutrient uptake, and overall plant performance. Through meticulous monitoring and precise control, we strive to maintain VPD within the optimal range to maximize Panty Punch Auto's growth potential. With the assistance of the Tent-X controller, managing VPD has become a streamlined process of precision and efficiency. By integrating sensors that measure temperature, humidity, and CO2 levels, the Tent-X controller provides real-time data insights into our grow environment. This invaluable information allows us to make informed adjustments to airflow, temperature, and humidity levels, ensuring that VPD remains within the optimal range for Panty Punch Auto's flourishing growth. In our ongoing quest for cultivation excellence, the TM+ Pro app emerges as a game-changer in remote control and monitoring. With a simple tap of our smartphones, we gain access to a comprehensive suite of features that put the power of precision cultivation at our fingertips. From adjusting light intensity and spectrum to fine-tuning PFD (Photosynthetic Photon Flux Density) levels, the TM+ Pro app offers unparalleled control over every aspect of our grow environment. But the benefits of the TM+ Pro app extend beyond mere convenience. Its intuitive interface and robust functionality empower us to make data-driven decisions in real-time, ensuring that Panty Punch Auto receives the optimal conditions for her continued growth and development. Whether we're at home or on the go, the TM+ Pro app keeps us connected to our garden, providing peace of mind and confidence in our cultivation endeavors. As we marvel at the impressive trichome development and overall health of Panty Punch Auto, it's essential to express our gratitude to those who have played a pivotal role in our journey. A heartfelt thank you to TrolMaster for their groundbreaking technology and unwavering support, to Aptus Holland for their exceptional nutrients that fuel our plant's vitality, to Grow Diaries for fostering a vibrant community of growers, and to all fellow cultivators for their endless encouragement and inspiration. In conclusion, Week 7 marks another milestone in our cultivation journey, as we harness the power of innovation and technology to master VPD and cultivate excellence in every leaf and bud. As we continue to push the boundaries of what's possible, let us remain vigilant in our pursuit of perfection, guided by the unwavering commitment to nurture Panty Punch Auto to her fullest potential. Stay tuned for more updates as we witness the ongoing evolution of Panty Punch Auto and explore the limitless possibilities of precision cultivation. Together, we'll continue to redefine the art and science of growing, one harvest at a time. #PantyPunchAutoAdventure #RootsAndFruits #TrolMasterControl #GrowDiariesCommunity #CultivationExcellence Genetics - Panty Punch Auto - https://seedstockers.com/ Plant nutrition - Aptus Holland - https://aptus-holland.com LED Photons - Lumatek - https://lumatek-lighting.com Controls - Trol Master - https://www.trolmaster.eu/ Watering - myself Love and attention - Me, myself and i As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and blessed with you all in my life, With true love comes happiness. Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so More info, the ocasional give-away and exclusive updates from all my adventures can be found - links in the profile description Friendly reminder all you see here is pure research and for educational purposes only Growers Love To you All 💚 💚 💚

F*CK MENSTRUAL CRAMPS! Purplematic is a high CBD, low THC strain by RQS. It helps with pain management without getting you high as a kite, ie it's great to battle those monthly belly cramps. It has become my wife's favourite F*CK MENSTRUAL CRAMPS strain. We use it to make edibles and tinctures. So, a little goes a long way. Rather than pushing for yield, we focus on getting one big fat juicy sticky cola. ITS FAST - 8-9 weeks from seed to harvest ITS BEAUTIFUL - the buds get a nice purple color with light brown pistils IT WORKS - follow our journey to make the best anti cramps medicine!

First week of flowering and its going great! The plants are still nice and green from the biogrow we gave some weeks ago, next steps is to give some guanokalong bloom nutrients and a small shot of green sensation from plagron!

Tengo este problema de oidio alguna solución orgánica para combatirlo está entrando en la 6ta semana de florscion plis ayuda! No todo es color de rosas la ventilación se la mantengo constante y la temp está x los 27 grados a la noche baja pero no sé que puedo aplicar así no se sigue propagando

8.11. chopped exactly at day60, some plants are furtehr along than others, some have amber some milky but with one drying tent you have to make a choice. Smallest plant from the beginning looks surprisingly good with leaf to flower ratio, the rest will be more trim jail. Updates on the numbers soon. 20.11. Curing in jars after 12 days in 16c and 60rlf after dry trim. Burping once a day

Very good week. The plant has grown up well, I keep doing the LST and it gave me 4 new tops, unfortunately I broke one. There are some yellow tips on the new leaves, I don't know why, maybe heat stress or some nutrient deficiency, so I gave the girl bio grow for the first time, 0.1 ml per 1L for start. See you next week. Happy growing

So i’ve learned this week that the plant at the back has “foxtail” buds which is probably due to some sort of light stress. Im not too worried about because apparently the quality isn’t damaged at all. Just very curious on why only one has it out of the 2 peanut butter. Anyway getting closer to harvest. Caaannot wait 😍🙏🏽 🖖🏽🖖🏽

Impeccable sa pousse bien, division en 8 branche. Génétique parfaite répond très bien à la doublure principale a bientôt pour plus d'informations sur cette souche de Ganfa Famer Seed.

Día 34 🤙🏼 . Luego de varias podas apicales, pueden ver plantas con 8 puntas o apices, menos una que tiene 4 porque se me rompió una rama (me sentí de lo peor 😰) ✌️🏼. . Quisiera recordarles que no hay una sola manera de cultivar y llegar a buenos resultados 💚.