Been a wonderful week! Defoliated for the last time until the flip and have great news! Have a new light on arrival TSW2000 and it will cover the whole space in the tent! Mars hydro have made me proud of myself! I’m glad I’m a loyal Martian 🙏💚 I will continue on as per usual until I flip them to 12-12 thank you for stopping by

12/20/24 chopped at day 55 with 80% cloudy and 10%amber and 10% clear or so hung for a couple days and noticed white fuzz forming at the base of the fan leaves coming out the tops colas. so thats a disaster. but these buds are so ridiculously dense that im not surprised. it still sucks. but i bucked everything else off and the stems and now am drying each bud out on a rack and trying to keep the humidity down and to save what i can. 1/4/25 saved a bit over an ounce. 30 grams dry. shes super triched out and hashy feeling when trimming. has deep black peppery notes when smoked but smells creamy and fruity/ tropical especially while

09/18/2021 At battle with catapillar this week Hand picking them off, some bud rot caused by catapillar's . Light defoiliating dying, yellowing leaves. Hand picking is tedious but well worth the effort. Feeding neptunes harvest 2-3-1 this is last week of feeding. Drinking lots of water this week gave each plant 2.0 gallons of Neptunes Harvest 2-3-1 hope it works out couldn't find fox farms, or big buds but I'm sure they will be fine.....will feed again on Friday then plain water for 3-4 weeks till harvest. Feeding should get them through the next two weeks then watering plain water should flush anything not needed by plants. Girls are thirsty this week, just in time for feeding! Neptunes Harvest seems to do the trick. Pistils piling on like crazy so one more feeding on Friday Of 2-3-1 and Week 7-8 banana peel tea, she should start Fattening up,and fading nicely by week 8-9.🙏🏻 The NPK value for banana skins is 0.6-0.4-11.5. But this is the value for dried banana skins. (I will make tea from peels) not sure of N-P-K Is for peel tea? But it works well in my opinion. Day # 6 week 6 applied gypsum today gypsum should help a little with PH issues,7.0 a little to alkaline but she will grow, but she thrive at 6.2 PH

She grows nice and quick if you Treat her well! I transplanted and made a couple mistakes so she didn’t reach 100% imo but it’s still a nice turn out! Hadn’t she not gotten pollinated I think the yield would’ve been more! Oh well still not a bad turnout will compare her to my other cut of this strain I have finishing up! Check it out, thanks for reading

Week 7 now, growth slowed a tad, figured my soil mix would be running a little low on nutes now & started the feeding. Chose to give them a single feeding of Plant-Prod MJ Grow as it has some extra stuff they may have been missing but will feed bloom starting next week! The bud sites where starting to get a little shaded from the larger fan leaves, removed them & the buds started swelling like mad! Last day of week 7 update: They drank the grow nutes with vigour, fed bud filler last night (nov 3). The feeding greened up the leaves, now I can confirm my soil mix lacks enough flower nutes for sure.

Hi guys, So this week im expecting rapid growth on all the plants, my plant still has orange spots i call it plant aids 🤣. There on 18/6 light cycle. I will be doing some lst on them to try and fill my grow space out abit. I been soaking them and turning lights down for 2 hours then turning light back up for a few hours then soaking again so on so on. My misses plant is doing better than mine thats for sure tho. Happy growing canna family 💚🍁

1/10 Week 9! Tara is just turning into a beast at over 3 foot she is taking over and the light is 5 inches from max height... hello super-cropping if I cant bend and secure the tall ones down some. Giving Tara as much room as possible and alternating between Cal-Mag and Magnesium Sulfate (Epsom salt) foliar feeds just to cover the bases as the rapid growth seems to be causing slight def. Defoliated both plants a good bit today, Ripley more so than Tara as that is just the leafiest dam plant. Upping feed to the high end see how they handle it, shifting feeds to mornings rather than lights on in evenings for my convenience. So they will get two feeds rather close together to make the adjustment. Since the next two grows are photos and the light schedule will be "on" at 6AM this is what needs doing. 1/14 New pics Defol Ripley further, never seen so many leaves. Only two plants in tent so lots of room for Tara which really needs to stop stretching NOW. 😅 1/15 Pic Bend and secure on highest branches on Tara lowered her about 3" so dropped lights 2" could not justify super-cropping in flower. Ripley looking damn good

Pictures do no justice for these 7.5’x 7.5’ wide 6+ft tall monsters

Gorilla Cookies has been growing really well this week. She is looking really good, and growing a lot under the G3000. I will be switching light times on next update to start flowering. She got some of the usual training of lst, and defoliation. Nothing else to report. Thank you Spider Farmer, and Pure Instinto Seeds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g Spider Farmer G300w: https://amzn.to/3S2zvsd Spider Farmer 10X20 Heat Mat Kit - https://amz.fun/lsa0J Spider Farmer Amazon Store: https://www.amazon.com/spiderfarmer Spider Farmer Official Site: https://spider-farmer.com Discount code: saveurcash (stackable)

Girls keep growing pretty well in my rookie opinion, giving them a lot of time and love ❤️!!

Flipped to flower, changed up the nutes.

Week 6 Flower Report: Maturation in Full Swing! 🌟 Welcome to the week where the magic of maturation takes center stage! 🌟 The garden has reached a pivotal moment as the trichomes are bursting with potential. Each one a glittering universe, they are the undeniable stars of this show, taking over every surface with their frosty brilliance. ✨ Watching them evolve is like witnessing art being created in real time – it’s a reminder of the beauty and patience this craft demands. Trichomes: The Frosty Frontier This week, the focus is all about those frosty beauties! • Trichomes are the key indicators of ripeness and cannabinoid production. Watching their progression from clear to cloudy to amber provides the ultimate insight into maturity. • Currently, we’re seeing a fantastic mix of cloudy trichomes with some clear still hanging around – a perfect sign that they’re gearing up for their final push. • Fun fact: Trichomes serve as the plant’s natural defense mechanism, protecting it from UV rays and pests while being our treasure trove for cannabinoids and terpenes. Spectrum Tuning: The Science of Light Light plays a major role in shaping the maturation process, and this week, we’ve dialed in the spectrum for optimal results. Here’s the breakdown: • Whites: Running at 77% to maintain robust overall growth and trichome density. • Deep Reds, Far Reds, and UV: Maxed out at 100% to mimic the end-of-season spectrum, signaling the plants to finish strong. • Deep Reds: Enhance photosynthesis efficiency through the Emerson effect. • Far Reds: Promote stretch and flowering hormone production. • UV: Stimulates trichome production for an extra boost of frost! We’ve also added a timing twist: • Reds & UV start 15 minutes before whites to simulate sunrise. • Reds & UV finish 15 minutes after whites to mimic sunset, creating a more natural light transition. These subtle timing tricks help reduce stress while optimizing light absorption, ensuring every photon counts! 🌞 Environmental Conditions: Precision is Key Here are the dialed-in parameters for the week: • Temps: 26.3°C • RH: 70.1% • CO2: 800 ppm • VPD: 1.03 kPa With these numbers, the ladies are thriving in their sweet spot, absorbing nutrients efficiently while maximizing trichome development. Lighting Power: • Lower layer at 800 PPFD and the upper layer shining bright at 1500 PPFD. The canopy coverage is perfect for even development throughout the garden. Nutrition: Balanced and Boosted We’ve stuck with the tried-and-true nutrient mix this week but with some strategic adjustments: • Removed Breaking Powder to focus on trichome maturity. • Introduced K-Boost at 0.5 ml/L, giving the plants the potassium edge they need to pack on weight and enhance terpene production. • Feeding solution details: • pH: 6.2 • TDS: 755 ppm • Temp: 20.6°C In the Autopots, the medium stays perfectly hydrated at 100% with: • TDS: 580 ppm • Temp: 22.2°C Shoutouts and Gratitude A huge shoutout to the amazing genetics and these incredible ladies, and a big thanks to Trol Master, Aptus Holland and Pro Mix for the stellar products that are elevating this grow to new heights! 🌱💪 To all growers out there, remember: Patience is the secret ingredient. Watch, learn, and trust the process – the results will always amaze you. Here’s to another week of growth and gratitude. Onwards to Week 7 with hearts full of joy and gardens full of frost! 🌟💚 Growers Love, Your Grateful Gardener Discount Codes so you can save big on your next check out 💚💚💚 Kannabia - DOGDOCTOR 30% off SeedsmanSeeds - DOGDOCTOR 10% off CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off Fast Buds - DOGDOCT 15% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 Friendly reminder all you see here is pure research and for educational purposes only Growers Love to you all 💚💚💚

Pictures are taken at the end of the week. Did not add KMPS for 2 days in the end, will begin again next week. Added Universol Yellow (High P) and Calcinit 1:1 to increase EC and root growth, no ml values, used the fertilizer to reach stated EC values. Roots are now clearly visible, turned of the sprayers for photos. Changed light hanging height to 50cm and intensity to 50% midweek. Turned off the exhaust at night to increase RH and Temp, at this stage this is great, later not so much. The Plant keeps rotating and this kinda worries me. Topping is planned for next week and in addition scroging, if the plant keeps spinning this could become a real problem. Otherwise the plant is thriving with good root growths and leafs, happy about that. Values are average of the day. DATE - °C - RH% (Tent Temp/RH) 20241014 23.6 60.1 20241015 23.9 54.9 20241016 23.8 59.6 20241017 23.9 61.1 20241018 23.1 64.3 20241019 24.0 64.0 20241020 23.6 61.5 DATE - PH 20241014 5.68 20241015 5.50 20241016 5.57 20241017 5.80 20241018 5.82 20241019 5.84 20241020 5.84 DATE - ORP (mV) 20241014 170 20241015 146 20241016 123 20241017 108 20241018 45 20241019 38 20241020 34 DATE - EC(us/cm) 20241014 1016 20241015 1043 20241016 1064 20241017 1136 20241018 1136 20241019 1136 20241020 1144 DATE - CF 20241014 10.16 20241015 10.43 20241016 10.64 20241017 11.36 20241018 11.36 20241019 11.36 20241020 11.44 DATE - °C (Reservoir) 20241014 21.9 20241015 22.0 20241016 21.9 20241017 21.9 20241018 21.6 20241019 21.3 20241020 21.5

Girls start from left Pineapple#1 - WhiteW#1 - WhiteW#2 - Pineapple#2. 59 days after germination. Change feeding Pineapple E. /Big Bud for Overdrive/. White Widow still on Big but but on the next week I wanna change as well. Watering cycle /Feeding - Feeding - only water - Feeding - Feeding - only water/. I wonder about flushing Pineapple on the next week. White widow I will keep longer. I'm really enjoy of Mars Hydro sp250 and mix of two nutrients company. Bought WhiteWidow need more time but can't wait for result. Pineapple start smelly nice. I wanna cure longer for better somke, maby 5-6 month. For the next sezon I really need second Sp250.

Welcome to Week 1 of the Sweet Seeds Gorilla Girl XL Autoflowering grow courtesy of the fine folks at Sweet Seeds! This is the second of three consecutive grows/diaries that I am doing to showcase the tried and tested genetics from this reputable seed breeder. My last grow was a smashing success so I have high hopes for this grow as well. Nothing much to report for Week #1 although I will mention that the first watering was only 0.7 of a litre per plant (0.18 of a litre per plant per day) and the second was 1.4 litres per plant (0.35 of a litre per plant per day). I am watering on my usual schedule of every fourth day as this seems to be the sweet spot throughout past grows. I am using the usual- air bubbled tap water that is PH’d to around 6.0 and if need be (over the winter months in Canada) warmed to 68-70 degrees prior to hand watering with a small watering can. The seedling that lost one of it’s cotyledon leaves is fine but still a little smaller than her sisters. So now on to Mom’s tip of the week… Mom’s Tip for Week #1 is- YOU GET WHAT YOU PAY FOR- QUALITY IS KEY!… When considering growing Cannabis, even on a small scale, quality is an important factor in all aspects from the seeds to set up to the supplies used throughout the grow. Starting with seeds from a established breeder will raise the odds considerably in your favour for a successful outcome. Many seed companies are more than willing to ship out freebies while building up their brands which seems attractive to new growers- but use at your own risk! There’s nothing worse than being halfway through a grow and discovering male flowers tucked in amongst the lowest branches or realizing that your beautiful buds have been mysteriously pollinated just weeks before harvest. I know that seeds from a reputable seed breeder are usually more expensive and can be hard to access in certain parts of the world. But purchasing quality seeds from a reputable seed company is the first step towards homegrown Cannabis success. An area that new growers often overlook due to the high price is the quality of crucial components in their set up- including tent, lights, and intake/exhaust fans. Anyone can get away with cheaper pots, oscillating corner fans, water pumps for dechlorination, etc but it’s worth every penny investing into the workhorses of your entire operation. An initial investment of around two thousand dollars will provide serious growers with the longevity and hassle free basics needed. If done right, quality components will pay for themselves within the first 6-12 months of use and continue to serve your needs for 3-5 years to come. Supplies used throughout the grow are the final area where quality is important but somewhat subjective too. Although I’ve already stated that I don’t feel the need to spend big dollars on all the extras (pots, oscillating fans, water pumps for dechlorination, PH/moisture meters, etc- I do believe in doing my homework to make sure that I’m getting the best bang for my buck. I thoroughly research every item purchased and used in my grows by reading customer reviews, speaking with other growers and sometimes even trial and error at my own expense. Making quality an important factor in all aspects of Cannabis cultivation will benefit you, your grows and the planet we live on. 🌳🌎🌳

Day 39 and things are still rolling along nicely.Ive done some light defoliation on some of the older fan leaves.Noticed a nice stretch this week and buds are forming.Ive just given plain water when the pots are dry.Se7000 dialed in at 50 percent and I’ll keep it there for a bit longer as they seem happy.Day 40 I made some adjustments to the set up and moved the inline fan/carbon filter and the humidifier outside the tent as I’ll need the room.I went ahead and added the bamboo scrog I made to spread the branches to boost production.The only thing I don’t like about the bamboo is it is a pain to water the girls.I need to do some more defoliation on the lower parts of the plants soon.Water with a dose of Recharge tonight as well.

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny REMO NUTRIENTS 👍 Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball.