Recommended
Likes
Comments
Share
week 2 Established a nice root system in this clone, all ready for transplant. Used some azos on the roots and some in soil. 7/29- Added 250ppm of epsum salt and 250 ppm of calmag to 1 gal of water. Fed maybe 2 cups to the plant.
Likes
3
Share
@Kokot
Follow
It was cold at night, so every evening i would put them in to the pool cover (there is like 3 degrees more) BTW because of the wind i lost my strain tag papers… So let me know if you know the strains😂
Likes
8
Share
So like I said. I don't follow directions to the T. Some said wait until 3 sets of true leaves come out to transplant, but I went ahead and just moved Ting 2 from plastic cup into 2 gallon cloth pot, using Fox Farm Ocean Forest. There's some leftover coco that I had from P4Ps blend that she is nestled in. I noticed her growth slowed down just a tad compared to Ting 1, but Ting 2 is still showing healthy growth with a great color and additional leaves still coming in. Remember, Ting 2 was sown directly into the medium without paper towel since OG Ting 2 went down the drain on accident. So I'm not concerned that she's just a bit smaller than Ting 2. They sit on the windowsill where they can get some tropical sun, but I do use supplemental lighting from a $35 4 head, 200 watt, LED grow light from Amazon. No high dollar lights over here. I'm just starting out and want to harness nature as much as possible for my indoor grow. I keep lights on an 18/6 schedule. I know some people do 24 hours, but IMO, plants need actual darkness to do their biological processes, and reach their full potential. For watering, I use a spray bottle to mist and keep top soil moist, and I water directly around the seedling. I'm impressed at how the Pot4Pot plant is quickly growing. For those unfamiliar with Pot4Pot it provides you with everything you need to grow autos. It came with coco, jiffy pellet, soil, diatomaceous stuff, and some growth hormone powder to mix into top soil. I picked the small 1/2 gallon kit. This plant already looks better than the one I tried to grow in December and officially died today. I am VERY curious to see how Pot4Pot grow will compare to some good old Ocean Forest. Also wanted to note I've placed the pots in front of a window that gets fed tradewinds that have touched lush mountains and ocean spray. Totally romanticized what is just a breezy window, but for real, it's a mountain breeze which could contribute to a great tasting bud.
Likes
60
Share
@I_and_I
Follow
Both banners still going strong, both fairly pale in comparison to the other plants, I think it's the vigorous growth, need to up feed for them, more nitrogen required maybe or cal mag or both? Day 38, found preflowers on the big banner in the middle Day 39 cleaned up the lower half of the plants, removed a lot of growth, the dude that said banner has mad growth certainly wasn't joking 😂😂 Day 40 and 41, continued vigorous growth 💪
Likes
35
Share
Heute gedüngt und ebtlaubt, dafür das alles gar nicht so gedacht war siehts gut aus, bisher ist Anesia top es riecht auch langsam nach candy 🤤🤤😅😁 bin gespannt was draus wird 😅 😏 Fertilized and leafed today, for the fact that everything was not intended that way, it looks good, so far Anesia is great, it also slowly smells of candy 🤤🤤😅😁 I'm curious what will happen 😅😏
Likes
75
Share
@Natrona
Follow
Divine Seeds Auto Contest Candy Outside Grow 👉Sponsored Grow👈 W10 F6 8/3-9 I wish I could share this week’s weather with you. It was sunny and comfortable in the 70-80s with 50% humidity. This means that whatever the temperature is, the air feels like it, not 10-15 degrees hotter. My Auto Candy is a tall lady and has good node spacing so there is space for air flow. When I went outside this afternoon, the sun was hitting the main stalk, and she was shimmering. Looking at the bud structure, the leaves are more spread out than the other outside gals with minimal sugar leaves. So far, she is easy to grow and resistant to fungus and pests. Thank you all for your continued support and encouragement. Your likes and comments motivate me to keep sharing my journey. Let’s continue to learn to grow together! Stay green, growers love 💚🌿 💫Natrona💫
Likes
16
Share
4/15/25 This plant is blowing my freaking mind. Long stacked colas. Even the lower buds are plumping up like golf balls. This is an exceptional plant so far. Shes starting to show the classic "sherbert" purple that ive noticed shows up with anything that has sunset sherbert in the lineage. Some of the leaves are starting to fade slightly and the purple is coming in. The rs11 that this seed came from, produced the most from a single plant out of all plants ive grown and trained and kept that small. She yielded 3.5 ounces or a 1/4lb of top nugs from a plant that was only about 18 inches tall and vegged for 6 weeks before flip. Once i start to clear out all of the fan leaves later on in flower, its just going to be buds running the length of the stems 4/18/25 I really believe this may be a keeper. She is absolutely stunning. Just everything is perfect. She has super long stacking of buds up and down the stems. Im actually super stoked to see how she finishes up. One of the craziest parts is that shes in a plastic 2 or 3 gallon pot and this plant is going to yield insane.
Likes
25
Share
week intel: its time to harvest top buds! because my base nutrients and one of boosters was salt based, i'll do flushing this week to get some relieve to plants in the last days stresses : flushing Drought stress via watering only one time with flushing this week feeding: day 1 : i flushed them with Advanced Nutrients Flawless finish and adjusted ph day 3 : no more feeding from now on day 5 : no more feeding from now on guide of the week : i harvest in 2 parts : first i harvest top of the branches and will let the lower buds to ripe another week then ill harvest the second wave. its crucial to get uniformed buds in terms of quality that you let the lower buds to get some extra air and especially light! then the pop corn buds quality will reach the top buds. my dry and cure style is this: 3 days of hanging upside down to get water activity lower to around 0.6 in 50% humidity and 26 C temp (i know its a little high but we are in a hot summer right now and i cant get it lower even with air conditioner) and then after 3 days of drying i remove leaves and stalks, trim buds and move them to jar for the rest of their life :D . and in the first 4 days of curing i open the jar door and let hem get some fresh air in the jar for about 5 minutes and close the jar door again, after 4 days of curing like that buds are smokable but they will get better as they getting cured about 1 month. im happy as hell with this harvest :D.
Likes
20
Share
Strawberry Pie Autoflower (FastBuds) Solo Cup Grow HARVEST This was a solo cup run so that affected the growth and yield more than the genetics. She did not branch and she pre-flowered early. In the end she was full of trichomes and buds were dense and terpene ritch. Was a bit slow getting in this harvest post and I did sample.. well.. most of it already and the smoke is sweet and flavorable. I would grow Strawberry Pie again, in a proper sized pot, if I had more seeds.
Likes
Comments
Share
Pictures do no justice for these 7.5’x 7.5’ wide 6+ft tall monsters
Processing
Likes
19
Share
@ElMetitor
Follow
Here we are, hello everyone, finally the fruits are about to arrive, the plant is in complete pre-flowering, you can see the low leaves that are turning yellow to give energy to the flowers, I foresee that the first sketches of firi, I really like this plant it will be because I did not grow Indica mote, beautiful emerald green leaves, large and large, very serrated, the plant is often visited by predatory insects, beautiful thing, neem oil until flowering. I will increase the water to 2 L per day. 👽
Likes
18
Share
Colas are starting to come together from the bud sites and put on overall weight, I’m happy with how the plant is doing. Gave it a final feed of 8tbs worm castings and 3tbs 2-8-4 power bloom Gaia Green, will be the final feed and it will just get water from now on.
Likes
293
Share
@Ju_Bps
Follow
Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 The babies growing good, finaly to transplant them 😁. Soil 2l pot Coco Ball Plagron Lightmix Previous leaves have been burned by the lamp, in the middle week a friend have been harvested, So I've setup the babies on the left side with light off, Since look really better and new leaves look healthy 💚 Starting Grow nutes 💧 Give water each 2/3 day And vaporise plant with water + Plagron Roots (1ml/l) 0.25 l Water + Roots + Grow (1 + 2 ml/l) 0.25 l Water + Roots + Grow (1 + 2.5 ml/l) 0.3 l Water + Roots + Grow (1 + 3 ml/l) PH@6 💡Mars Hydro - FC 3000 50% 80 cm Mars Hydro Fan kit Setting 8 Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller Fast Buds - Gorilla Cookies FF🌲🌲 https://2fast4buds.com/us/seeds/gorilla-cookies-fast-flowering
Likes
7
Share
Here we are in week six of flower and not a lot has happen this week other than the usual watering and letting her do her thing. Only trouble this week was updating GoPro had to try a few times. Other than that we got some rain in my home town and collected about 60 gallons that I'm going to use to finish the rest of the grow. Also, got my new AC Infinity CLOUDLINE T4, Quiet Inline Duct Fan System with Temperature and Humidity Controller, 4-Inch. I was really hoping this two plants would finish before the year ended, however, it looks like they got others plans. See you guys next week.
Likes
40
Share
Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Have fun with the update. Hey everyone ☺️. This week she has developed beautifully ☺️. I have already started training (topping) :-). Otherwise the tent was cleaned and the humidifier filled up. Until then, I wish you a lot of fun with the update. Stay healthy 🙏🏻 and let it grow 👍 You can buy this Strain at : https://sweetseeds.es/de/cream-caramel/ Type: Cream Caramel ☝️🏼 Genetics: Blue Black x Maple Leaf Indica x White Rhino 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Bio Bizz Coco ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 .
Likes
27
Share
"Push your care, push your burdens aside, erase everything inside and leave just one thing on your mind. "You only live once, so just go fucking nuts" Just like this plant. Geewiz. Dont know what else to say about her. Ill let the pictures do the talking.
Likes
4
Share
@Ninjabuds
Follow
My Sticky Rice plant is one of the smaller ones in the bunch, but don't let its size fool you! It's got these incredibly healthy, vibrant leaves that just scream 'good genetics.' I've got a feeling this little one's gonna surprise me – it might be small now, but I bet it's gonna pack a punch!" This past week has been a whirlwind of work, leaving little time for anything else. My phone's camera roll is sadly neglected, with only a few snapshots to show for it. But finally, I'm finding a moment to catch up on my grow diaries. It's been exciting to see the progress, even if it's just through photos. I'm looking forward to documenting the next stage!
Likes
14
Share
@AndrewC
Follow
So this is the Tear Down week. The timing of it makes it so i will need to the harvest flag in a few days when I can weight and test the plants. I have included the Cleaning, and Cutting and some Root Porn. I will make the harvest post in about 4-5 days, when I can trim these plants. There is a lot of Plant here. I got way more than I was expecting. I don't have a scale that measure this amount of plant, without taking like 10 measurements and then adding them together. So I will just be posting the dry weight. I will post the wet weight as dry weight * 1.65. Autopots: Wow, what a great product. I have been blown away by how well and how easy it was to work with them. They really did solve the watering issues. Excellent product. If you are a beginner, start with Autopots. -= Lessons Learnt =- - Overdrive the air to your Autopots. In my control plant, I used a small rectangle air stone (instead of a standard air dome). This lead to root rot and some other issues, it also put significantly less air into the water. The root rot, give the material for the Brown Algae to grow. Using a huge Air-disc-Air-Stone would be an excellent combo to mix in with the air dome itself. Something like this: https://www.amazon.ca/Pawfly-Diffuser-Suction-Hydroponics-Aquarium/dp/B01MY3AQ33 at the bottom and the air-dome on top of it, will be what I do with my next experiment. - Air stone in the reservoir. I had two instances where algae grew into the res. An air stone would have helped. It would have also helped my control plant get less root rot. Given the amount that the air-domes and air sources got engulfed, having the water have more o2 in it would have only been beneficial. - Don't grow 6 plants in a 4x4. Since my control plant was about 1/8th the size of the others, I think I could have grown 5 in the shape of a 5 (on a 6 sided dice)⚄ This placement would give a much more spaced canopy for airflow and more importantly light. The sides of some of the plants were lighter green and produced larf due to lack of light penetration. - This tent was on 19-5 schedule. This worked out very well for this strain. After every lights on, they were in the praying position, so this strain was able to recover in that 5hrs off. If I had more seeds, I would run these again, and try 20-4. I think this strain could handle it. All for all, I think I'm going to 19-5 as my default timing. This kept up a solid DLI. - Staring at .9EC (really .7 EC cause my water here is .2 EC) Then bumping up at .1 a week, until 1.6EC worked out VERY well. I experimented on this crop all the way up to 1.9EC, which burnt the tips of this plant. I think if I did this strain again, I would do 1.6EC until 3-4 weeks left then crank it to 1.9. It did plump them up when I went to 1.9, however it left them looking rough. Bulk was added though. - Sticking to 6.0PH for all of veg, and 2 weeks into flower worked great. The plant had solid and consistent color and leaf shape . The plant's did get hurt, due to some issues (as noted on the weeks). I switched to 6.5 PH in the last 3-4 weeks and it helped them recover, and plump up noticeably. -VPD. The #1 thing I focused on was VPD. I keep it .9kpa range, as best as humanly possible. It was honestly, HUGELY noticeable compared to my other grows. I know truly understand the value of properly dialed in VPD. This is the one lesson that will stick with me forever. - Super-cropping: On the plants I give the chiropractic treatment too, had much thicker stems as much larger channel internally. I did this treatment to 4 of the 6, and the 4 that had it done has larger buds and recovered from defoliation faster. TLDR; VPD is king. Super-cropping is worth the time. Keeping PH and EC dialed in were all wins. Autopots kick ass.