Likes
Comments
Share
@Grow4fun
Follow
Binging of week 5 and the buds have started to form
Likes
7
Share
Tamara starts her second week of flowering with a solid stretch, which I had to keep tucking into the scrog net so she could get more light exposure. It’s truly amazing how much she can grow in just 24 hours. Looking closer, we can already see the first trichomes forming, and I have to say it again: I absolutely love
Likes
21
Share
No co budu psát,už se mě zbíhají sliny. ?😁 Zálivka ,už jen voda ,ale jantar zatím stále není vidět ?a nebo už špatný oči 😂uvidíme myslím, že snad do týdne bude hotovo. Čtvrtek zalito o5 jen voda a trošku sem jim ubral na listech.
Likes
15
Share
So this was a simple going grow!!! It’s strange how the hot so big under the light! I had one blue cheese under the same light and tent and it was way smaller!! Anyway 1 of these has come out perfect very happy the other two I’m not to sure the hairs were still pointing up but I really don’t have the time to have them going another week there already over the time they was supposed to be done but yeah I’d say out of 10 I’d rate this blue cheese growing experience a 6 out of 10 hopefully this improves when it’s dry!!!
Likes
18
Share
@valiotoro
Follow
As you can see the buds are super sticky make sure to have enough gloves 🧤 Harvest in 2 times the top buds then 7-10 days later the lower buds✂️ No popcorn 🍿 The smell is divine sweet candy with a touch of cardamom 🍭🍬 See you in 2025 for the smoke review Take care 😎
Likes
1
Share
Week 5 of flowering 10/16/24 Changed nutrients to fit week 5 Buds are getting bigger and thicker. Defoliated plants. Watering 4 times a day (with 10%-20% runoff) hand watering to full saturation of the media with 20% runoff at the end of the week. Checking runoff EC every 3 days. Lights now at max height and 90% power. After replacing the exhaust fan timer, didn't notice ant issues. Adding 2.5ml/gal of H2O2 (35%) to the reservoir to keep bacteria away.
Likes
211
Share
@PapaNugs
Follow
These girls are super sticky! Resin is building up all over the place, including the leaves. I've been defoliating like crazy but they just keep coming back.
Likes
3
Share
@PalmaGrow
Follow
5 - 11 octubre terminando séptima semana de floración
Likes
2
Share
@Crwfz1
Follow
Two totally different girls with all the same treatment one is absolutely huge while the other is already wrapping up I topped it pretty early and the other was just lst and hst doing great tho should be finishing up around next week or so with the little guy should fatten up quick
Likes
11
Share
la bimba cresce bene,manca poco alla sua fioritura. lei non è dopata ma stimolata nelle sue fasi con concimazioni biologiche mirate. L'obbiettivo è fare fiori duri, compatti e brillanti, non gonfi dal chimico. Non ha mai sofferto carenze, pianta con 16 rami tutti principali e tanta massa fogliare. Non teme il sole a 40 gradi del mediterraneo, anzi gli piace. Buona giornata amici coltivatori,alla prossima settimana
Likes
70
Share
In all this was a terrible harvest, and because I also do videos for my YouTube channel I don't update on Grow diaries properly which I will start doing with future grows.... Well on my next harvest will definitely do a better job of documenting my harvest details. But in regards to the Dark Phoenix, yeah not a strain I'm a fan off. At first I kept telling myself that I done a terrible job that's why i don't like it... But I need to keep in mind that I'm not going to like all strains, all strains are different and we all have different preferences. Some people might like the Dark Phoenix, me personally I'm not a fan. It has that earthy taste to it... Hashy/kushy...... Smoking it as I'm typing that's why 😅 and even with a longer cure I doubt it would make much of a difference to make me like it. But in all still a nice smoke, good high from her, the high hits you straight away and keeps you active and creative.... Don't know what else to say about her really, just trying to give you guys the best most accurate review that I can without bringing my own personal thoughts about the strain. I might not like it but its still a good smoke. 👍🏾😎
Likes
64
Share
@DevilsBud
Follow
11/10/21 new week for Captain future Single photos will be updated soon She bit slower then the rest but getting there topping has bin done and everything going great so far plants loving the new FC-4800 so as i 🤩 absolutely no extra heat is coming of them 👌🏻 I maybe will top some more but as far it Goes for LST this will be the only thing i will do to the plants let the rest grow freely visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Fully marshydro supported Setup: Marshydro GT120x120x200 Marshydro FC-4800 LED lamp Mars Hydro tent handy info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter. Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation.
Likes
6
Share
@Ninjabuds
Follow
A sturdy plant with large buds it gonna be some good smoke it has some super sticky buds with a strong pungent fruit smell
Likes
6
Share
30/05/2021 sono emozionato ho fatto cambio ora non ve l ora di vedere i fiori....credo che avrò un pessimo raccolto farò pochi grammi...piante irregolari di altezza dove prende piu luce e dove prende meno purtroppo sbagliando si impara spero solo di fare almeno 200g cosi da poter fumare per due mesi
Likes
6
Share
@GRONE
Follow
Feliz por el resultado empiezo a aplicar jabón potásico y aceite de nem de manera preventiva Ordena de ramas con malla SCROG Ajuste de altura de lámpara
Likes
121
Share
So she was chopped (wet trimmed) yesterday (F74) and is now hanging up to dry at 55% RH and temps between 15 and 18ºc. I made fresh frozen dry ice hash today using a 160 micron bubble bag, a flat surface, 8kg of dry ice and a couple 5 gal buckets. I already have the weights for that, which far exceeded my expectations. Those figures I will post once she is dried and in 1 quart screw top glass jars. People suppose dry ice hash is inferior quality vs bubble hash. I am not experienced enough to comment on that but must say it is extremely easy to make hash with dry ice, it took 40 mins to process 995g of trim which included sugar leaves, some stems and popcorn buds. I then pressed it into 3.5g briquettes for storage using a pollen press. As you can see from videos, this stuff is all blonde - and after already trying some today with some friends, it knocked our boots off! Will be back in 5-7 days with harvest figures, smoke analysis and other details! Happy growing all! P.s I ticked defoliation this week - the only week I intentionally cut any leaves off for the entire grow 😉
Likes
Comments
Share
@UDUDUDUDU
Follow
It was a slow week, peeking at a fungul infection'
Likes
11
Share
Me siento muy contento con estás auto... Fast buds sorprendiendo con unos cogollos hermosos y un olor increíble... No hice el mejor trabajo pero estoy feliz de haber hecho esto... estoy enamorado con las ruderalis! Auto de Fast buds un súper 10!
Likes
62
Share
@Hou_Stone
Follow
it grows so fast. The lower leaves are shaded and away from the light. So I cut them as the plant gets taller I really don't have a good setup to be able to clean my roots. I tried this week anyway. I watered each pot with 2L (not enough I think :/) of water at 450PPM PH: 7 then after I gave 1L of water at 900PM PH: 5.5. There was a big puddle in the room afterwards. But it wasn't that hard to clean up after all. In 5 minutes with a rag and a bucket ------------------------------------------------ -Daytime temperature: 24-29°C -Night temperature: 22-27°C -Humidity: 50-75% ( Too high but it's hard to lower it... I need advice please contact me if you have :) ) -Lamp: Mars Hydro FC3000. intensity 80% at 40cm from the top leaves -Room: Mars Hydro 100x100x180cm -Extractor: Mars hydro 402 CFM Max. power 3/10 -Substrate : 70% coco, 25% perlite, 5% vermiculite. My instagram : https://www.instagram.com/p/CuMhQ_BsjRP/?utm_source=ig_web_copy_link&igshid=MzRlODBiNWFlZA==
Processing
Likes
15
Share
Gonna be leaving the plants to the auto feeder for a week probably starting this weekend, here’s hoping they make it through that relying on just the water stakes and hempy res. Flowering has definitely started, for the Amnesia especially so, but all the plants are getting along just fine and giving me a nice sea of colas over my grow area. Cheers and best wishes for yall’s croptober!