Musste die Lampe ganz an die Decke befestigen. Mal hoffen das Sie nicht mehr wächst. Die PeanutButter ist eine sehr Massieve Pflanze und füllt mein 60X60 zelt komplett aus.

things are still going great. She’s still at 18/6 light schedule. No nutes yet, in a month or so I’ll start with molasses and water, for the natural sugars when I put into flower.

Start of week 5

So she got the chop 2 weeks prior to what I wanted, but I did not lollipop enough doing this Scrog and suffered high humidity, lack of airflow and as a result lost 4 tops... Out of 16 big ones. But I have harvest, wet trimmed and left to hang dry in a room on clothes drier. Room circulation fan on low, and temp is 22c with 51% humidity. Aiming for a 10day dry it maybe sooner. Then we will smoke test and cure then re test 🙌💚 Thank you all for following along this LONG and heartbreaking breaking Journey

Time to harvest this beautiful tester strain! I will be drying in a 60% humidity!

It was going really well and started feeding it nutrients. I started with grow big and cal mag. I started raising the ph a little bit and she seemed to adjust and love it. Other than that good week!

He tenido unos problemas esta semana. Una de las plantas no tiene orden jajaja. Al parecer sus ramas no están muy fuertes y se caen. Acá es donde me arrepiento de no haber usado scrog. Otras dos plantas están presentando un poco de amarillo en las puntas de las hojas y una que otra un poco quemado justo en la punta color amarilla. Por lo demás las veo bien, se hicieron un poco más gordas, pero no lo suficiente o lo que quisiera. Necesito incorporar co2 y scrog en el próximo cultivo. Espero resolver mis problemas y mejorarlas para la otra semana. Buenos humos

As week 8 started, buds are gaining size. Plant is drinking lots of water. About. 3/4 a gallon a day to day 1/2. Added a second light to setup now. Hoping to help the flowering buds with extra light. Relocated my fan to help circulate air flow around more of the taper colas. Should have a around 3 week a left til harvest. Can’t wait to see how this first grow turns out and what to learn from it overall at the end.

I’ll be the first to admit I’m no expert on this and I need some help. It seems some of the flowers according to my information at least, have gone on into the pre-flowering stage because of some of the white pistils. Am I too early or too late? Or is this just how the plan is going to be naturally also if anyone has any budget friendly suggestions on how to increase a yield…please throw us a life line. HAPPY GROWING AND HAPPY NEW YEAR!!! May you all be blessed and more successful then ever!!!!

Week 6 day 42 flower. Really starting to develop trichomes so now I'll be watching for the right amount of amber and milky heads , heard sativa can go as long as 90 days in flower

coming soon... Harvest week..... Cut the girls down week 8 day 5. Did a quick truim and now will hang dry. Will report back on details in a week or so.

So, the big day finally came!💚 I harvested the plant and got her cut and hung up to dry. But before that, she spent a solid 72 hours in complete darkness to finish off. (A little boost before the chop)🌿 Everything went as planned and is looking pretty good so far. Nothing out of the ordinary, just smooth sailing through the final stage. Now it’s all about patience while it dries properly. Can’t wait to check out the final results in a couple of weeks! 🌱

Lovey is setting up nicely and I am keeping her fairly clean. There is powdery mildew and she has been sprayed with a fungicide. She is at least 5” tall now, I may not great with the diary logging but she is great at the growing! Such a language she speaks!

Hey ZAMNESIA has sent some more seeds to rock under the new lights X2 Vipraspectra lights 200watt total 400 watts These new lights (LEDS) where sent by Vipraspectra to upgrade me to newer LED lights with the sunlike full spectrum lights , the room is brighter no doubt and the spectrum of light outperformed the HPS running at 400watt the same running power as both LEDs . As you can see I'm already a fan of this light and I haven't even been running it under plants yet I've just had it on to see what the running temps where of the room and at 19oc does a pretty good job at keeping stable temps . I do plan on adding another P2000 in for flower The leds themselves run with 3000k 5000k warm white and cool white IR AND DEEP RED giving of a full spectrum of light , running there pretty bright and a recommended hanging height of 20inch , I've hung the lights at 5foot with the hps also and will not move my hanging height instead I'll start from 100% light and increase towards flower the amount of leds. These lights arent over expensive considering there dimmable with a great functioning dimmer switch, also I notice there built quality is superior in this category of lights and price, there solid heat sink is amazing giving the light a solid build finish the driver is mounted on the top but raised away from the board to maintain better heat dissipation from the driver and board . Approx 6 foot cable hanging rope also include with a very well thought out hanging kit .the only thing I think was a downside is having no stickers I'd love to see these light come with logos corresponding to the size of the light , 2x2 = 2foot sticker would be amazing 😉 If your interested USE CODE : IGROWNEIL at checkout an get 5% off and also help this channel There's also the link to join and become an affiliate https://partners.viparspectra.com/create-account?ref=jursrsaof8 Back to the seeds these girls where the frist to pop above ground on my last . I didn't get out of the frist week and the timer failed so ZAMNESIA quite happily sent the same batch of seeds to start again with which is pretty class of them , big thank you These genicitis are top class 👏 I'm glad to be running them again as I do love gorilla glue they also have sent Runtz and GSC which in themselves are another couple of great strains with amazing genetic potential locked up in there seeds 😀 Started on 14-11-21 , I was planning on using hps along with this run but instead I'm gonna aquire a xs4000 from viparspectra 480watt and have the two p2000 hung at either end leaving us with 880watt LED grow ( will be insane) The seeds are all off to a great start but I'll always have great exceptions for this strains. The last time all 3 gorilla glue where frist above the soil , nows there a wide selection of strains growing and will be multiple plants also I ended up dropping 20 seeds I total 3 of them being the GLUE

It’s day 33’from seed. All of the plants are really healthy. The plants have a really great root system at this point… I am currently slowly moving the light intensity up to the veg area. Now that are in a groove they are about to explode… I’m hoping I can flip the plants to flower in 1 weeks but I’m thinking I will wait to weeks and let them get a little larger. The plants are just now starting to look visually different next weeks update I will be ababoe to go into the visual differences, they are just not that extreme yet to really talk to much about.

Continuing to feed compost tea each Wednesday with added Bio Pk. Plain water all other feedings. Her buds are really starting to swell nicely, they are nice and dense already. I am lightly defoliating to uncover any bud that is looking shaded. No issues currently, seems to be growing fantastically.

Hello guys, Hope you are doing good. Second week of flowering and what a beautiful stretch she got almost 20 cm ! but it's now over since 1/2 days. Before starting the third week of flowering I like to defoliate a bit as you can see into the pictures. Not big defoliation but enough to keep that energy on the flower and enough leaves to power that beautiful machine. I also started to use the PK BOOSTER following the recommandation by GHSC. She start to smell as well, when I was cutting her leaves that smell was playing with my nose and let's be honest it kinda made my day. Hope you like it, don't hesitate to follow the tutorial and update on my IG. Take care Sawyer