31 Aug. I start the third week of my autoflower. The plant is growing well, but I noticed small yellow spots on the leaf tips, which seem like a mild calcium deficiency. This is probably due to the fact that so far I have been giving water with a slightly low pH, around 6, while the ideal range would be 6.5–7. At the beginning, to lower the ppm of the tap water (which was around 211 ppm), I mixed it with demineralized water. This brought the ppm down to about 109–140, making it harder for the plant to absorb the available calcium. Additionally, the soil I am using, Biobizz Light Mix, is lightly fertilized but does not contain enough calcium to correct this small initial deficiency. For this week, I will not add any fertilizers. I simply want to raise the pH to 6.5 and use water with higher ppm, so the plant can better absorb the nutrients already present in the soil. The lamp is positioned about 35–36 cm from the plant and so far there are no burn issues. Temperatures range between 25 and 30 °C depending on the day, while humidity in the room stays between 40–60%. The humidifier is always on because I keep the window open, but the dehumidifier is not being used, as it is not necessary at the moment. I also have a new oscillating fan arriving to replace the current fixed one, and I’m waiting for a regulable extractor (90–145 m³/h), which will allow me to control the air perfectly during winter if needed. This week my main goals are: Increase the water ppm without overdoing it Adjust the pH to 6.5 Keep observing the plant without adding any fertilizers Everything else seems fine and growth is regular. With these corrections, I expect the new leaves to grow healthy and free of spots. ==UPDATE 31/08== To control the calcium deficiency, I will administer an eggshell solution until I reach 300 ppm (I will boil some eggshells and administer the solution in tap water).

Week 3 -A big week of growth and training. -Started with calcium deficiency but ended the week having it fixed. -They are getting thirstier by the day. I have been top feeding so far but looks like I may begin using the autopot reservoir in week 4. --Feeling iffy about it to be honest. I never liked water sitting in the tray... Day 30 - LST'd Day 36 - SCROGGED. Was gonna do it on day 1 of week 4 (day 37) but was to eager to get it done. Not gonna lie, I know the canopy is hella low and I did that on purpose. I'm anxious about height as my tent is only 5 feet high and I want to keep a consistent 2 ft gap between the lights and colas throughout this grow season.

Mamma mia sti maledetti Ragnetti Rossi stanno rovinando tutte le foglie... abbiamo introdotto nel box una trentina di coccinelle🐞 che speriamo possano tenere a bada l'infestazione...

You can see the nute burn here from the first and only feeding earlier in the grow. Just a tad too much fertilizer.

Die Lady scheint sich zu erholen👍

A metà settimana la pianta è in continuo progresso, i fiori si gonfiano adeguatamente, la cima sta maturando a vista d'occhio. Monitorerò il comportamento dei fiori ed il colore dei Tricomi. Attendo la fine della settimana per mostrare gli ulteriori progressi.

Few days more and it’s ready to harvest 😎

01/04/2022- Hello and welcome all been away on some family matter. So today was the last day this girl got watered and will also be the last day she got light as well, she will be cut down Friday morning. The smell has gotten a lot more stronger since flush was started last week Wednesday. Will update before I chop her down.

Another great week here. Defoliated the girls throughout the week. Continue to do well and very healthy. They drink a good amount but nothing crazy. The frost is unreal! It's even on the fan leaves! I can't believe the smells as well. The orange sharpie smell! It's awesome and I can't believe the stability of this strain before it's even released! Watering daily or every other day. Also adding water to to self watering pots as needed. Starting to use the UVB today!! 🤞😎 Gonna start now at 30 minutes a day for a few days. Then slowly increase as we move forward. They already have a lot of trichomes, as you can see, and I'll look to increase those. I plan on harvesting these girls at week 8 to save the terps as much as possible. Let's go!

500g co2 supplimentiert

13 hrs and 33 mins of daylight when I took these pics on 8/27 There's not much to say other than that this Girl is a beast. I'd say she's pushing 7 feet, I've been just guessing height, but I should probably get an accurate measurement on the plants next week. It's hard to get her in frame! I was a bit lax with feeding this week so her color isn't as good as it could be but I should have more time going into September to really put the juice to these girls so they have a strong finish💪

Están creciendo muy bien 😀!!! Así bien que ya no hay espacio 🤣🤣🤣🤣🤣🤣

_______________________________________________________ Mo. 9.3. - 3 Liter pro Pflanze gegossen (ca. 200ml Drain) 1,2 ml / Liter "Calmag" 1,0 ml / Liter "Bio Grow" 3,0 ml / Liter "Bio Bloom" 1,0 ml / Liter "Top Max" Ph 6,3 / 600 ppm _______________________________________________________ Di. 10.3. - Luftentfeuchter in der Dunkelphase AN (45% / Low / Auto) _______________________________________________________ Fr. 13.3. - 3 Liter pro Pflanze gegossen (ca. 200ml Drain) 1,2 ml / Liter "Calmag" 1,0 ml / Liter "Bio Grow" 3,3 ml / Liter "Bio Bloom" 1,1 ml / Liter "Top Max" Ph 6,3 / 615 ppm _______________________________________________________

The cold weather and rain in the first two weeks definitely held these back. We had upper 70's F starting day 3.These girls are loving the warmer days and nights and have sped up their growth. More rain day day 4 then intermittently through the night and into morning of day 5. Day 6 we saw cooler temps and more intermittent rain in the evening and through the night. Day 7 temps stayed cooler and we had thunderstorms theater night. I added Diamond Brand Ferrous Sulfate at the above listed rate of 2.5 ml/gallon of soil in day 6. I distributed these granules evenly across the top of the soil. Using 7.6 pH well water creates challenges in keeping iron and phosphorus available to the plants. Adding this amendment acidifies the soil and provides a readily available and lasting iron supplement during veg.

Flushing chopping tomorrow

She popped through the soil in 5 days and is doing great so far. Stretched a little more than I prefer, but it may help with the LST bending I have planned. Just getting water so far.

Bonjour à tous les padawans et les maîtres jedis Pour cette semaine 3 au seizième jour ma plante fais 15 centimètres et son sixième noeud apparaît je décide donc de pratiquer un LST sur ma plante. Pour ce j'utilise du fil de fer galvanisé que je plante directement dans le substrat en faisant attention de ne pas endommagé les racines car n'oublions pas que ce qui pousse dessus pousse aussi dessous. Jour 17 je pulvérise (dessus et dessous les feuille) une solution composé d'une cuillère à café de savon noir mou dilué dans un litre d'eau en prévention d'éventuels nuisibles. Je répète l'opération une fois par semaine jusqu'à la floraison. Je corrige mon LST suivant la pousse de ma plante ... Pour ma par c'est la manière dont je procède mais petit rappel de la technique du LST: Quand commencer à appliquer la technique LST De nombreux cultivateurs commencent la manipulation dés que les plantes possèdent entre 3 et 6 nœuds ou une paire de feuilles. Durant cette première étape de la croissance, le tronc encore flexible est pliable sans risque qu’il ne se casse, même si au fur et à mesure du développement de la plante il sera de plus en plus difficile de le plier. Nous pouvons continuer à guider la croissance des branches durant toute la culture, même durant la floraison, ce qui pour cette étape représente un grand avantage face à la taille, qui n’est pas du tout recommandé une fois que la formation des têtes commence, cela stressera en effet la plante, ce qui aura pour effet de retarder la récolte. Comment appliquer la technique de guidage LST Si nous sommes prudents, la flexibilité naturelle des fibres du cannabis permet de plier leur tronc et branches avec une relative facilitée, même durant la floraison des plantes. En utilisant une corde fine, nous pouvons accrocher la pointe de la plante à la base du pot par exemple ou à un tuteur que nous aurons planté dans le substrat. Nous plierons le tronc avec précaution et nous le fixerons avec la corde, à partir de là, nous pouvons augmenter progressivement la tension de la corde, chaque jour un peu plus, jusqu’à obtenir la position souhaitée. Soyez attentif à la réaction de la plante, essayez de ne pas appliquer trop de pression sur la corde et rappelez-vous que la flexibilité des branches peut varier d’une plante à l’autre. Pour obtenir de meilleurs résultats, il suffit de suivre quelques règles simples. Pour commencer, nous devons choisir une corde fine mais pas trop pour ne pas blesser les troncs au fur et à mesure qu’ils grandissent et qu’ils deviennent plus gros. Nous pouvons utiliser des crochets en plastique souple ou de n’importe quelle autre matière flexible pour éviter d’endommager les plantes. Spécialement en intérieur, utiliser des cordons en plastique de couleur (voir les diaries de @Silky) est très pratique pour voir facilement les accroches et faciliter le travail au milieu du réseau formés par les cordes, les tuteurs, les mailles ou les supports que nous aurons dans la culture. Bien entendu, en culture extérieure et surtout en guerilla nous ferons juste le contraire et nous utiliserons des matériaux de couleur qui n’attirent pas l’attention pour que notre jardin reste discret. Pour stresser les plantes au minimum, la mieux est de réaliser ces manipulations le soir ou juste après que les lampes en intérieur s’éteignent, ce qui leur permettra de se remettre durant la nuit. Normalement, le jour suivant nous pourrons observer comme les pointes des branches que nous avons pliées se dressent de nouveau vers le haut à la recherche d’une source de lumière. Que la force soit avec vous💪 Que la force soit avec vous