Still doing foliar: Cal-Mag Terra Aquatica, Pro Bloom, and silicate from T.A. some plants are removed because of root root. naw left with 19/24 plants. I also use a mobile app to set the light intensity, and I burned the leaves later. Which gave me the knowledge that the application is not very accurate.

Ernte Ergebnis von white widow ist 35g von beiden sieht sehr lecker aus und es schmeckt auch sehr lecker

( 4cm in height ) Stress trained this lady 3 days ago because she was getting too long and slinky so I decided to help hear out and give some support. Very good growth development thus far and grows exactly like a Do-Si-Wine should. Growing strong at 3 nodes already. ( 4.5cm in height ) This lady is growing at her own pace. At this moment I’m waiting patiently until this lady catches some speed because she has been slowed down the leaf development has been disoriented The 2nd node is a 3-fanned leaf and the other side is just a 2-fanned leaf so growth is weird and a bit slow. The 3rd node developing looks like it both going to be 3-fanned leaves so I hope when that is properly developed this lady will growing nicely

Trichromes are starting to be produced and buds are starting to form and get sticky, each plant is developing a nice smell but the strawberry is out performing the rest by a mile definitely a vigorous strain that just wants to go go go! Inter node spacing is crazy and looks like the girls are setting up to make some fat buds hopefully

🌱 Week 2 Report: The Journey Evolves 🌱 Grow Fam, the adventure is in full swing! 🌟 The Gorilla Melon from Fast Buds is out and shining its light, and the Papaya Zoap has made its debut in the Cannakan, bringing with it a story that adds even more depth to this incredible run. When the universe speaks, we listen. 🍈✨ I didn’t plan on popping Papaya Zoap from Sweet Seeds just yet, but sometimes things just have a way of aligning. After a few other seeds didn’t germinate, I felt an inner pull toward this special strain. As it turns out, the universe had something beautiful in mind! Just days later, my brother @daggadna also began germinating the same genetics—gifted to us during Spannabis. Was it a coincidence? I don’t think so. 🌱 This is more than just a grow now—it’s a journey with purpose, guided by synchronicity and connection. I can already feel the magic building up with this one, and I can’t wait to see where this road takes us! Now, onto the Papaya Zoap… something tells me this plant is going to take us on a ride we didn’t expect but absolutely needed. 💚 Let’s make something incredible, Brother Dagga—this one’s going to be legendary. Gear Updates: All Systems Go 🚀 This week, everything’s dialed in perfectly with the TrolMaster system. Shout out to the incredible DSH-2U Humidity Station! 🌬️ This tool is giving me precision control over the RH (relative humidity) ranges in the room, keeping the environment just right for my babies. Having that accurate readout and control allows me to maintain optimal levels for each stage of growth. It’s like magic—you plug it in, set the desired ranges, and let it do its thing! 🌡️ By monitoring and adjusting humidity levels on-the-fly through the TrolMaster app, I can ensure the environment remains stable, and that means happier plants and healthier growth! No more guessing games. From anywhere—whether I’m working in the garden or chilling out—I can track and tweak it all. Heck, I could be on the toilet and still have complete control over my room! 😂 The AMP-3 Precision Meter has been running 24/7 in my water solution, giving me real-time updates so I can make any corrections when needed, right from my phone. This tech has taken my grow to another level. ✨ Nutrition Update: Keeping It Balanced 🍃 As for feeding, we’re sticking with the basics to give the plants what they need, without overloading. Right now, I’m running: • Regulator: 0.15ml/l • Startbooster: 0.25ml/l For now, I feel like this is the sweet spot—just enough to encourage root development and early growth without overloading them. I’ll be adjusting the feed as we go deeper into the grow, keeping an eye on how they respond. You know me, always tweaking and improving along the way! Shoutouts & Gratitude 🙌💚 Huge love to everyone following along—whether you’re here on Grow Diaries, over on YouTube, or on IG. Your support keeps this journey alive, and I am so grateful for every comment, like, and message! Special shoutout to my sponsors for fueling this project: • Nutrition: @aptusholland @aptus_world @aptus_es @aptusbrasil @aptus_thailand @aptus_portugal @aptususa_official @aptusplanttechnz @aptusplanttechaus • Controls: @trolmaster.eu @trolmaster.eu.support @trolmaster.support @trolmaster.agro • Soil: @promix_growers_eur @promix_cannabis @promixmitch More to come soon, and you won’t want to miss it! 📺 I’m also documenting everything on my YouTube channel, and I’ll be sharing behind-the-scenes content on IG, so hit that subscribe button and follow along. Let’s grow together, fam! Growers Love to All 💚 The love and support from the grow community is something I never take for granted. This journey wouldn’t be the same without all of you! I’m so honored to be part of this amazing community, and I can’t wait to share more updates and insights along the way. Remember, this isn’t just about growing plants—it’s about growing together. 🌱 Until next time, stay positive, stay inspired, and keep pushing forward! This week’s shoutout is dedicated to the synchronicity of life, my growing community, and of course, Papaya Zoap and Gorilla Melon. Let’s see what magic we can create together! #HighFrequency #PositiveVibesOnly #PapayaZoap #GorillaMelon #TrolMaster #InBalanceWithNature #GrowLife #AptusTruePlantScience #GrowersLove

12/5 did some LST yesterday the first time I tried it she’s responding well I’m going to continue nutrients at half strength and that’s all for now 12/6 there are more bud sights on this than I’ve ever seen on any auto flower. I’m already seeing a lot of crystals in the leaves she’s responding well to the LST and I gave her a 1 mL per liter feeding of nutrients with 2 L of water I’m trying to be very careful. I have been using SF1000D lights I bought them a few years ago,they’re not bad they do get hot, especially when I’ve tried to put two of them in one tent it is very difficult to keep cool. Viparspectra I’ll keep it running at 80% and that should be good enough for one autoflower, I got the XS1500. I want to see if there’s any difference in the newer LEDs compared to my older Spider Farmer lights . I found a discount code in one of the discussions here in the site somewhere, and it actually worked it came to about 145 total. It’ll be here tomorrow. 12/7 💎💎💎 I love this seed company. This plant that I topped between three and four and did LST two days ago on is showing me bud sites that are fuller and more full of crystals that I’ve ever seen. this is my 10th Autoflower, my first one from this company and it’s completely different, way better, it’s just phenomenal. I like a clean and symmetrical and even grow. Doing this will make it much easier to process. I’ve never seen a plant grow like this. This is my first time trying LST and I’m glad I did it. It completely changes the plants you can definitely see there will be much more. 12/7 she looks great. because I spread the branches out the way I did, and only have one light on the leaf surface temperatures and the bud surface temperatures are all between 72 and 74° which is perfect. 12/8 Resin production is incredible. it looks like millions of tiny angels jizzed all over my plant it’s the most beautiful thing I’ve ever seen 12/8 I got the new Viparspectra light today. It has about 100 more LEDs in the SF 1000 D I’ll take some magnified pictures of the LEDs. The new one is much heavier I like the dimmer that way I don’t have to put in secondary lights for seedlings. It’s not a bad light I like being able to dim the light I ran it at 100% and the temperature was a little hot for me and I’m keeping it kind of close to the plant so I’ll probably lower it down to 75% and that should be good I think. Also I noticed that this one Viparspectra light looks to me brighter than 2 sf100d lights. 12/9 I turned the Viper spectra light down to a little bit less than 75% to bring it down to 100 W. When I did that the temperature stays around 95° on the board and about 98° on the driver, so it is far cooler and more efficient at the same wattage than the older spider farmer lights which were at 110 to 118°( about the same as the XS1500 at full power). So a single 150w xs1500 is about the same as 2 SF1000D lights as far as heat I'm sure the PPF or whatthehelleverthatis is higher ,very nice, If the SF1000D's would have had dimmers they would have been perfect. 12/10 awesome 🤩 12/11 I am seeing lots of resin production more than I’ve ever seen. I think this is so far been my best most successful grow this plant is great. I’m glad I found the seed company. The other ones I used before were pretty bad, I don't LOVE them at all. Also my Yamaha A4A 1600 receiver is total junk, I mean total... I'll never have the money to spend on something like that again, I was totally ripped off. Unrelated but so many formerly trustworthy companies are just TOTAL garbage

Week 6 This Lady is up to 8 tops😎. Now I just have to get each top in the right locations at which point I’ll let them get a few nodes taller and then flip. This Lady is growing a little slower than her roommate (A Mimosa EVO) so I left a few extra fan leaves on her in the hopes that will speed her up a bit. I have noticed that this plant seems to throw the two main branches at a node but it also throws out additional branches. I’ve had a plant do this before and in my experience it makes the buds denser. We will see how it goes with this lady. Cooler internals are: 6.0 pH 0.4 EC 56 F solution temp. I can’t wait to flip the tent !!!! 🔥🔥 Onward 😎🍻

Luego de haber realizado una poda en el cual me excedí lograron a estirar y ocupar todo el espacio disponible, las ramas de las Big Bud tuve que abrirlas ya que su estructura es compacta, pero eso no quiere decir que no tenga esperanzas de sacar una buena cosecha.

Last few weeks have been fantastic and I can't wait to see how they all respond to the first big stress event. Topping any sites that are at canopy while letting the rest develop but keeping the best 6 primaries and keeping it nice and simple. 3/9 ok so I kept more than 6 on these, I think there's one of them that has 7 but the rest all have 8-9 main branches, if they were within 3-5" of the top of the canopy I just kept them, that much variation will even itself out with just some slight bending. 3/12: So I've topped all primaries once now, should be 14-18 new tops on all of these, I'm hoping to top again next week assuming they can keep growing 1" per day, that should give me an excellent structure for a big fat canopy in the flower room.

Week 7 - As you can tell my back plant is very UNhappy going to feed some CalMag and Kangaroots hopefully it will help other than that the smell of super puré lemons is Out of this world !

Semana 5 ( 05Nov - 11Nov)

Been all good this week , starting to stack after the stretch 😎👍🏽 Moved in 8 more from other tent to also put into flower

Muy satisfecho con la genética ya que el olor era lo que estaba buscando, el efecto es bastante relajante y me pareció muy agradable para pasar con amigos y trabajar.

Day 49. Switched from maxigro to maxibloom. So far so good 👍🏻.

Bud voilette très résineux

9/16/23 - Day 106 - Today was the last day of nutes. Tomorrow I start my 6 day flush with just PH 6.1 water. This is the last step before the chop! I'll throw some pictures up tomorrow of the last water exchange. I'll take some videos of the process as well. 9/17/23 - Day 107 - I added a video uptop to show how a manual water change is completed. There are two options when you start your grow to either use a water hook up or add and remove water manually. I got the unit so quickly that I didn't have my water hook up ready. For the next grow it will be ready for automatic everything. Over the next 6 days I'm going to let her drink up as much water as she can then on the 23rd I will harvest and then hang them in the box to dry. 9/22/23 - Day 112 - I've been on vacation for the past week. I turned 40 on the 18th and I took the family to Disneyland. I've had someone managing the box for me in my absence. The box is so easy to use the person who is house sitting was able to keep the operation going. That's a great sign that anyone can do this. Tomorrow is the chop! I'm super excited! So far this week she has been taking in 2x the amount of water than normal. She's dying and she knows it! She still looks just as green, no welting. Looking good. Check out the photo up top. I just got home after a CRAZY long drive home. The plant still looks the same as far as color. I was expecting her to welt, and to have yellow leaves. But she looks like shes still doing good. This is nuts. Shes not really showing any signs of dying even though shes been in .7 ppm for over a week! I may let it go another day or two? Im not really sure, I'm in super unchartered territory, you're all going to learn this along with me. Ill post updates.

Welcome to Flower Week 4 of Sensi Seeds Purple Berry Muffinz I'm excited to share my grow journey with you from my Sensi Seeds Project . It's going to be an incredible ride, full of learning, growing, and connecting with fellow growers from all around the world! For this Project , I’ve chosen the Feminized Photo Strain Purple Berry Muffinz: Here’s what I’m working with: • 🌱 Tent: 120x60x80 • 🧑‍🌾 Breeder Company: Sensi Seeds • 💧Strain Info : 26% • ⏳ Flowering Time: 6-7weeks