Tag 65: Ab heute gibt es nur noch pures Wasser mit eingestellten PH Wert (6,3).

Everything looking good

Hello Growers & Tokers! Roots, roots, roots. At the beginning of the week they got transplanted into their final pot, 11L fabric. Medium used was Light Mix from BioBizz. Synergy from Grotek nutrients was blended in the medium to help out the roots. They were a bit down after transplanting but by the end of the week they were doing better. I'll leave her be for a week then I'll be topping to spread that canopy out and have loads of colas. Or at least that's the idea but two of them seem to be growing faster than the others so I might have to die those tops down. Take care out there and happy growing!

Esta semana seleccionamos las plantas más adelantadas de nuestro cultivo, para colocarlas bajo la nueva luminaria Led LazerLite Pro 720 de The Pure Factory, con la potencia ajustada al 50%. Miramos de que las cuatro variedades estén representadas bajo el led y bajo las lamparas HID, de esta forma podremos ver las diferencias entre los dos sistemas. Seguimos con nuestra rutina de fertilización para la fase vegetativa Grow Soldier + Green Mystic by JUJU Royal y CALMAG de BioBizz. Al final de la semana, cambiamos el ciclo lumínico para pasar a 12/12 Floración.

So this week I added nutrients for the flowering stage. I gave her a little trim as well as added her netting. I flipped her on last Sunday PP

I don't remember @dutch passion

Week six! Butterfly is still chugging along - not mus to report really, she's stopped stretching and is piling on the pistils. Day 36 - Photographed and fertigated 5l each. Day 38 - Photographed. I do feel it was my fault stunting this girl, but she will stay the size she is now. Special thanks to St Aubins Genetics for providing the seeds for this grow. Check them out at www.staubingenetics.com

nice week this week. very noticeable transformation. I have a yetti purple berry kush in there which smells just amazing. this week i tried, for the first time, some under canopy LED. 2nd day with it today as i write this. they really took it well. perked up and kept at it. the color and hue is starting to come through. Super happy with this tent. I think its worth the effort to create an organised space to give yourself the best chance possible. you will see the difference in approach form Auto tent and then photoperiod tent.

🇩🇪 Cherry Limeade von Doja – Wochenkommentar Die Cherry Limeade von Doja steht weiterhin richtig gut da 🌱. Das Blätterdach bedeckt die 60 × 60 cm mittlerweile ziemlich ordentlich, auch wenn hier und da noch ein paar kleinere Lücken zu sehen sind 🌿. Insgesamt bin ich mit der Struktur aber sehr zufrieden. An Tag 20 habe ich dann den etwas schmerzhaften Teil erledigt ✂️. Ich habe die Pflanze gelollipoppt und alle Blätter und Blüten entfernt, die im Schatten lagen. Das entfernte Pflanzenmaterial habe ich direkt wieder als Mulch ins Beet gegeben ♻️. Ehrlich gesagt tut mir jede größere Entlaubung ein bisschen im Herzen weh, weil die Pflanze danach gefühlt nur noch halb so groß aussieht 😅. Aber diesmal gilt ganz klar Qualität vor Quantität 🎯. Ich möchte möglichst ausschließlich große Top Buds produzieren, die während der gesamten Blüte ausreichend Licht bekommen ☀️. Eine interessante Erkenntnis hatte ich diese Woche auch beim Tensiometer 💧. Ich musste feststellen, dass das Manometer offenbar etwas hängt. Durch leichtes Klopfen bewegt sich die Nadel wieder und zeigt anschließend einen anderen Wert an. Rückblickend hatte ich wahrscheinlich gar keine zu niedrige Saugspannung / hohe Bodenfeuchtigkeit – die Pflanze hat sich schließlich optimal entwickelt 🌱. Das Problem lag vielmehr darin, dass das Tensiometer teilweise falsche Werte angezeigt hat. Zum Glück habe ich mich zusätzlich immer auf die Fingerprobe und vor allem auf die Entwicklung der Pflanze verlassen 👆🌿. Dadurch ist trotz der fehlerhaften Anzeige alles gut gegangen. Ich habe das Tensiometer nun herausgezogen und komplett neu mit Wasser befüllt 💦. Allerdings muss ich das Manometer weiterhin leicht anklopfen, damit sich die Nadel zuverlässig bewegt. Mein Ziel bleibt bei etwa 120 mbar Saugspannung während der Blüte. Heute gab es außerdem 3,5 Liter Almicanna Flower Komposttee 🌸. Der Tee wurde zuvor insgesamt 48 Stunden unter Belüftung gebraut und durfte anschließend ins Beet 🫧🌱. Jetzt heißt es erst einmal zurücklehnen und der Cherry Limeade beim Aufbau ihrer Buds zuschauen 😎. Nachdem sie sich in den nächsten Tagen von der Entlaubung erholt hat, werde ich die Lichtintensität schrittweise auf 1000 PPFD erhöhen ☀️. Jetzt beginnt für mich der wirklich spannende Teil der Blüte – weniger Training, mehr beobachten und hoffentlich viele schöne, dicke Top Buds 💚🌸. 📊 Parameter der letzten Woche: 💡 Licht: 900 PPFD / DLI 39 (12/12, Stufe 6, 40 cm Abstand) 🌡️ Temperatur: 27 °C 💧 Luftfeuchtigkeit: 66 % 📈 VPD: 1,2 kPa 🌿 CO₂: Ø 550 ppm 💦 Bodenfeuchtigkeit: 120 mbar 🇬🇧 Cherry Limeade from Doja – Weekly Update The Cherry Limeade by Doja is looking really good 🌱. The canopy now covers most of the 60 × 60 cm tent quite nicely, although there are still a few small gaps here and there 🌿. Overall, I’m very happy with the structure. On day 20, I had to do the slightly painful part ✂️. I lollipopped the plant and removed all leaves and flowers that were sitting in the shade. Instead of throwing the plant material away, I added it straight back to the bed as mulch ♻️. I have to admit that heavy defoliation always hurts a little because the plant suddenly looks like it has lost half of its mass 😅. But this time I’m clearly going for quality over quantity 🎯. My goal is to produce mainly top buds that receive plenty of direct light throughout flowering ☀️. I also discovered something interesting with the tensiometer this week 💧. The pressure gauge seems to be sticking slightly. A gentle tap on the gauge makes the needle move again and reveals a different reading. Looking back, I probably didn’t have excessively high soil moisture at all – the plant has been developing perfectly 🌱. The problem was simply that the tensiometer was occasionally giving me inaccurate readings. Fortunately, I also relied on the finger test and, most importantly, on how the plant itself was developing 👆🌿. Because of that, everything worked out despite the faulty readings. I have now removed the tensiometer and refilled it completely with water 💦. However, I still need to gently tap the gauge to get the needle moving reliably. My target remains around 120 mbar soil suction tension throughout flowering. Today I also gave the plant 3.5 liters of Almicanna Flower Compost Tea 🌸. The tea had been actively aerated and brewed for a full 48 hours before being applied 🫧🌱. Now it’s time to sit back and watch the Cherry Limeade build those buds 😎. Once she has recovered from the defoliation over the next few days, I’ll gradually increase the light intensity to 1000 PPFD ☀️. The really exciting part of flowering starts now – less training, more observation, and hopefully lots of beautiful, chunky top buds 💚🌸. 📊 Parameters from last week: 💡 Light: 900 PPFD / DLI 39 (12/12, Level 6, 40 cm distance) 🌡️ Temperature: 27 °C 💧 Humidity: 66% 📈 VPD: 1.2 kPa 🌿 CO₂: Avg. 550 ppm 💦 Soil moisture: 120 mbar

Exactly a week ago these five Sour Diesels were planted. The sixth plant you see in the pictures is a CousKush Auto that is being nursed for 2 weeks to then be taken care of by family. They germinated quickly, after less than 72 hours most cotyledons were fully open and the roots grew through the root cubes. At this point they were transplanted into 0.12L seedling bags filled with pre-buffered coco and perlite (saturated with PH'd RO water). They will stay in those to develop a good root structure for around a week before moving to 1L pots. They reacted decently to the transplant although the cotyledons curled down on some of the seedlings. I attribute that to the coco being too moist when they were transplanted. I waited to give them more water until day 5 to dry the coco out a bit. Day 5 is when I first watered them, using a 0.3 EC nutrient solution. They all get 8-10 ml every 24 hours now and seem to be doing great.

the plant keeps swelling at a slow pace. looks bigger every day and smells stronger

Hello friends! Here’s the skinny on my grow “First Mainline Attempt!”. I’m going to split this up a bit so it’s easier to follow, this will be a long one :) ~ Progress Day 56 ~ There’s been a lot of growth happening since I got this new light from KINGLED, genuinely surprised. I could notice the difference within hours that my little ones where love’n the light! Compared to last week the difference is huge (to me). I was using a Bestva LED light for my grows up to this point. I read reviews and thought that would be the best light (Bestva) within my current budget. But my plants didn’t seem happy, or growing at an expected rate, I thought I was doing something wrong. Well long story short the KINGLED has made a impact on my plants, I can’t believe all I needed was more light. I will post the light specs below if you’re interested. Now i’m gonna jump right into this weeks growth. I’ll separate each plant below and provide details on height and structure. ~ Individual Progress Notes ~ [CBD Blueberry] Height: 6.0" Tops: 8 Notes: Smallest of the mothers, and she has a weird asymmetrical growth pattern, the nodes don’t match evenly, not sure what mutation this is. It could be that this strain doesn’t like being mainlined.. If this negatively impacts the overall yield and quality I will kill off this mother plant and clones. I have 2 more seeds to germ so it’s not a total loss. [Mazar] Height: 8.0" Tops: 8 Notes: This girl is responding the best to the mainline experiment, I’m excited to clone her off later. Nice symmetrical growth :) [White Widow] Height: 6.1" Tops: 8 Notes: I honestly thought she would be the runt, guess not! Though not the biggest she has the phatest leaves and thickest canopy. I can only wonder what the next few weeks will be like. Must clone! [Super Silver Haze] Height: 7.2" Tops: 8 Notes: Another that’s responding well to the treatment. I’d like to clone her of as well as soon as there is enough growth for me to collect samples. I’ve only had this strain once so I’m hoping this will be as good or better, who knows :) [Purple Urkle #1] Height: 8.0 Tops: 8 Notes: I lost the clone to this girl, I'll need a replacement(s) to test before I flower, more stretch than the others, hmm (both 1 & 2 need to be tested via clones) [Purple Urkle #2] Height: 9.0 Tops: 8 Notes: This girl is very stretchy and her clone is insane! Thickest stalk out of any of my girls? I don't know why but she is phat, love it. Check out my diary "A Few Clones" if you're interested in this possible monster of a plant :) ~ Concerns ~ My only real concern at this point is mite and insect control. This grow is in the garage so that’s not especially easy to avoid. Staying vigilant and nuke’n everything that moves (without harming my plants) is working so far. Those pesky mites and other fan favorite insects! I swear I’ll get my revenge >:( ~ Final Thoughts ~ Other than the local mite population making claims to my property, I’m very satisfied with this weeks progress. Installing the ducting and fans was the hardest chore I had to do, and now that’s taken care of. Before I finish up I want to apologize for not being as detailed and thorough these past few weeks. Now this is a bit personal but I’m willing to share it with ya’ll. My mother has stage 4 cancer, yeah… It hasn’t hit me like a train yet, but I’m still suffering. I’m trying to prepare myself in the event she doesn't make it through chemo and that’s a tough pill to swallow friends. Hopefully I can produce some cbd medicine for her to ease her pain, and help to improve her quality of life. I’m going to close this weeks update by saying thank you to all of you wonderful people, the support and comments make my day, I appreciate em all. Much love, Meus [Light Specs] Brand: KINGLED Series: King Plus Model: 3000 watt Replacement: 2000 watt Avg Power Draw: 615 watt Input Voltage(AC): 85-265 Volts Frequency: 50-60 Hz Lifespan: 50,000 hours Total LEDs: 300 Core Coverage Area at 24": 7.8' x 7.5' PAR at 18": 760 μmol/m2s Lumens: 23454.6 Weight: 15.8 lbs

Mehr Super Cropping Pflanze für den Umzug in ihr Blüte Zelt vorbereiten 1x1 m

Girls doing well this week will update soon.

13cm vertical growth! Just waiting for her to explode on a couple of weeks! 😃

Tak, teď začíná ta pravá zábava.. Holky vypadají velmi zdravě, Snad se už moc nevytahnou do výšky, nemám už kam zvedat světlo. Ale co se neposere mezi 2 a 6 týdnem. Se už neposere vůbec.

Bubba Kush Pre 98 is an easy plant to grow. She gave me no hassles or worries even in a warmer climate than she would like. The leaves are a dark green color naturally. Yield wasnt much, I am waiting for buds to dry and cure to provide the dried weight. I did not feed them any nutrients. The one got so dense that I had to move it indoors to avoid bud rot - im almost convinced it was an autoflower and they made a mistake at the seedbank because it was short and flowered out of nowhere. Outdoor buds were sundried - to lower THC for novice and paranoid smokers, I tried the smoke and it was a very pleasant high - removed anxiety, stress, overthinking, and relaxed my body. Perfect.

Started only using water, waiting game at this point. Leaves starting to really fade to a purple/black. While the buds take on a pink/purple hue