The Grow Awards 2026 🏆
Likes
Comments
Share
week 3 kicked off and the flowers are really atarting to take shape! 27” tall now! the stretch is unbelievable
Likes
35
Share
@BigDaddyK
Follow
Watered today Tuesday 7 litres plain ph water , caught runoff , EC=1.08 (1080) ph=6.3 Watered today Friday 7 litres of 5ml/l Terra bloom , 2ml/l Sumo active boost , caught runoff,EC=2.2 ph=6.5 Watered today Monday 7 litres 4ml/l Terra bloom , 2ml/l Sumo active boost , caught runoff EC=2.2 ph=6.4
Likes
38
Share
@B4niTa
Follow
Sorry i'm stoned, Tomorrow i'll add comment😎 She grow really crazy, and she need some defoliation. At next run for sure Topping for babies. I expect that she will be taller than wider😃
Processing
Likes
15
Share
@Dico29
Follow
Seems to be going good, idk if I should ad more bloom booster or just use molasses. Also the broken cola I replanted, seems to still be alive but don’t really know what else to do. Just hope I can get these out of some random guys back yard soon.
Likes
127
Share
@SwissKush
Follow
Day 29 - she grows very well a. the shape of the plant has been formed b. our environment is a bit hot, but the lady is growing very well after defoliation, trying to control the humidity, at night it goes down to 50%. c. added 2L of nutrient solution mixed at double strength to get the PH up to 6.5, and the ppm to 600, was liberal with the Mineral Magic. d. growth of the main has slowed just a bit as expected, the outer branches though are rising outward Day 30 - growth explosion a. she is growing well, leaving ventilation opened all the way up, humidity at 50%, heat is a bit high 29c, our region is very hot right now, I added more yeast to the CO2 generator, instantly started bubbling up again. Will keep the CO2 in there directed toward the plant. b. ill be increasing the Mineral Magic as I go, adding Silica to any plant allows for them to withstand heat better c. it seems my plant likes the 6.2 PH the best, the breeder recommends 6.5, but with DWC, it needs to be a little lower, 6 would probably be best. Day 31 - growing well a. there is growth all over the plant, she is very compact, but very vigorous b. temperatures are around 28, humidity hanging aroung 55 with all vents opened up to lower temps Day 32 - another growth explosion a. she is taking off big time b. environment is stable at 27 degrees and 55% humidity c. removed the 2 largest fan leaves to allow light to now evenly hit the entire plant Day 33 - growth observed all over a. all is well, added 1L of double strength nutrients to the DWC Day 34 - explosion occured a. she has exploded her 4 branches out the sides, its still so young... b. the DWC is running well, letting the PH hang right at 6 Day 35 - wow a. the plant is doing very well b. removed 2 main stem leaves to open coverage for branch growth c. added 2L of plain mineral water to the DWC, ppm 600
Likes
Comments
Share
@Robom069
Follow
Day 47/48 introducing the 12/12 on high power leds on the ladies lookin good so far the black domians nmow oin the right and the acid dough on the left i think both lamps work very similar
Likes
5
Share
🔥💯🍻
Likes
4
Share
Hey everyone! Quick update on the grow. We're officially in week 3, day 2 of veg, and so far, everything’s looking pretty solid. I’ve noticed a bit of slight nutrient burn starting to show on the edges of the leaves, so I’ll need to monitor that. Nothing too serious yet, but I’ll be keeping an eye on it and adjusting if needed. Today I did a little more defoliation to help open up the canopy, and I also topped both plants to encourage some more lateral growth. After topping, I finished off the training with some LST (low stress training) to spread the canopy out and give the lower shoots a chance to catch up. I’m aiming for an even canopy spread, so this should help with that. I gave them a full watering with 3L of pH’d water at 5.8 and 400ppms going in. However, the runoff came out higher than I wanted again, Looks like next feed will be just plain pH’d water to try and bring those numbers down a bit, similar to my last run Everything’s moving in the right direction, though, so I’m feeling good. Looking forward to seeing how they develop in the next week! Thanks for following along, and feel free to drop any tips or suggestions! Happy growing! ✌️🌱
Likes
Comments
Share
Estamos en la semana de transición del periodo vegetativo al periodo de floración. Nuestras plantas ya tienen un tamaño correcto para poder pasar de 18h de luz a 12h... De esta forma iniciamos dicho periodo. Hemos conectado tres equipos led LazerLite Pro 720w ajustados al 50% de su potencia. Repartimos bien todas las plantas para que reciban luz de forma homogénea. Regamos, esta vez solo con agua, para no tener exceso de fertilización, ya que nuestro sustrato es muy rico en nutrientes.
Likes
14
Share
Week 7 Update – Recovery and Growth 🌿 Sorry for the late update—I was completely out of commission the past few days 🤢, but luckily, my girlfriend stepped in and took care of the plants. The good news? The stretch is finally over! But note to self—never again 9L pots for plants this size! 😅 BioBizz#1 – BT23 Despite a “drain” pH of 7.8, she’s doing okay overall. However, this will be my last run with BioBizz. While I’ve managed the CalMag issue this time, Advanced Nutrients has completely won me over. AN#4 has thicker stems and looks more vigorous, and AN#3 bounced back quickly with AN nutrients. AN#4 – BT23 She’s praying to the light every day and is officially the largest and healthiest plant I’ve ever grown—no deficiencies so far! 😍 AN#3 – BT19 I had to defoliate heavily, but you can barely tell. Height is becoming a challenge, so I’m hoping it just barely fits—because it has to! 😅
Likes
10
Share
Hey growmies! This is always amongst my favorite weeks of growing, week 4 of flower. The stretching stops and our flowers start the long, beautiful process of fattening up! throughout this week I kept pulling off fan leaves, I know it's controversial with autoflowers, but this girl is big and has a lot of fan leaves. I started using my PK booster this week, lil buds are getting stickier and fatter every day, check out the timelapse! If this flower finishes nicely then the competition is already a W for me, since we would be looking at a decent harvest and weed is a great reward in itself! hope to see you next week
Processing
Likes
29
Share
@starke
Follow
Happy belated Day 100 my dear Clones, today is Day 101 and 54 of Flower 🌹😍❤️ Another week and we should be good to harvest. Had a first look at her trichomes, milky with some clear. Bring it on my sweet sugar ✌️ And look at that beautiful rainbow 🌈 Always stunned by the sheer beauty of those plants, this one in particular 😍 Day 104 and 57 in Flower, just more rainbows. Watered with pure water, they still drink a lot... Let's see, will have to check the trichomes soon. Can't wait ❤️
Likes
9
Share
@Justrite
Follow
Chop day , will make full detailed harvest report in the next few weeks after dry and cured .
Likes
24
Share
@BB_UK
Follow
beautiful girl ill suggest for anyone to grow! the trim was easy as i prepared the harvest and defoliated along the way! i took a different route that will now add to my future grows where i lowered the lights power to 50-60% and lowered the light close to the tops and had my light turning off 2 hours earlier for the last 3 days! and wow oh wow the density the terpenes the THC i can't wait for her to dry, my normal is 5 days! she smelled so good! could especially catch that mint when pulling off the little fan leaves! she has so many tones! will be sure to seek out some more from super sativa seed club! they're impressive! video will be added and updated as soon as its rendered! be sure to check out my Instagram page for daily updates!
Likes
7
Share
@BIYEI
Follow
Vegetacion (Tiempo estimado 28 dias) 7/12/2023 - 5:00hrs y 22hrs: Se transplanta a canastilla hidroponica en cubo de 2 lt de solucion nutritiva, se verifican parametros basicos del agua, mantener cuidados especificos. Agua de osmosis: Ph 6.0, PPm 300-400, Ec 0.6-0.8, Temperatura 22°C - 26°C, Humedad 70% Ambiente: Temperatura 22 °C, Humedad 75%, Ventilacion 15%, 18 hrs de luz , 6 hrs de obscuridad. No pude tomar fotos 8/12/2023 - 5:00hrs y 22hrs: Verificar parametros basicos del agua, mantener cuidados especificos. Agua de osmosis: Ph 6.0, PPm 300-400, Ec 0.6-0.8, Temperatura 22°C - 26°C, Humedad 70% Ambiente: Temperatura 22 °C, Humedad 75%, Ventilacion 15%, 18 hrs de luz , 6 hrs de obscuridad. 9/12/2023 - 5:00hrs y 22hrs: Verificar parametros basicos del agua, mantener cuidados especificos. Agua de osmosis: Ph 6.0, PPm 300-400, Ec 0.6-0.8, Temperatura 22°C - 26°C, Humedad 70% Ambiente: Temperatura 22 °C, Humedad 75%, Ventilacion 15%, 18 hrs de luz , 6 hrs de obscuridad. 10/12/2023 - 5:00hrs y 22hrs: Verificar parametros basicos del agua, mantener cuidados especificos. Agua de osmosis: Ph 6.0, PPm 300-400, Ec 0.6-0.8, Temperatura 22°C - 26°C, Humedad 70% Ambiente: Temperatura 22 °C, Humedad 75%, Ventilacion 15%, 18 hrs de luz , 6 hrs de obscuridad. 11/12/2023 - 5:00hrs y 22hrs: Verificar parametros basicos del agua, mantener cuidados especificos. Agua de osmosis: Ph 6.0, PPm 300-400, Ec 0.6-0.8, Temperatura 22°C - 26°C, Humedad 70% Ambiente: Temperatura 22 °C, Humedad 75%, Ventilacion 15%, 18 hrs de luz , 6 hrs de obscuridad. 12/12/2023 - 5:00hrs y 22hrs: Verificar parametros basicos del agua, mantener cuidados especificos. Agua de osmosis: Ph 6.0, PPm 300-400, Ec 0.6-0.8, Temperatura 22°C - 26°C, Humedad 70% Ambiente: Temperatura 22 °C, Humedad 75%, Ventilacion 15%, 18 hrs de luz , 6 hrs de obscuridad. 13/12/2023 - 5:00hrs y 22hrs: Verificar parametros basicos del agua, mantener cuidados especificos. Agua de osmosis: Ph 6.0, PPm 300-400, Ec 0.6-0.8, Temperatura 22°C - 26°C, Humedad 70% Ambiente: Temperatura 22 °C, Humedad 75%, Ventilacion 15%, 18 hrs de luz , 6 hrs de obscuridad.
Likes
3
Share
@coolesrat
Follow
This week things are swelling quick great ! The purple is showing up more but still only trace amounts. The black has no signs of changing colour however I already know my pheno ain’t the one ☝️ . But the purple shows promise!! Slow at cloning and a higher mortality rate then the black amnesia haze. This one almost every single clone I made all root amazingly ! Highly recommend for its yields and ease in the grow room. You can really feed it high . Still unknown why the purp has curling leaves but from others grows I see it’s fairly common . I’m guessing it prefers a slightly more alkaline PH . I’ve been using citric acid to ph correct and every time I sway a little low like 6.4-6.2-5.9 the plants leaves curl slightly more. Most mixes are in the 6.8-6.5 range however.
Likes
60
Share
Beginning of week.. Wow.. Just... Wow lol.. That's all I can say. Amazing scent.. Gorgeous colors.. Very happy and healthy girl. Besides very minor spotting on some lower leaves.. Which I am assuming was from Calcium def.. She is looking great! I'm not sure what this is all about, but damnnear all my plants have this clawing on leaves that are not exposed to the light.. Looks like wind burn.. Looks like nitrogen toxicity.. But I know for a fact that its neither.. Fans are not even really blowing on the plant itself.. And other leaves would also be clawing if it were nitrogen toxicity.. I'm assuming it's just from not enough light exposure.. But not an issue.. She is happy and loving life! At this point I am stopping silica.. Just too many conflicting articles about it not doing any good in flower.. And even causing the smoke to be harsh and the bud hard to break up.. Which does make alot of sense.. I only like to use silica in veg anyways.. And for the stretch.. It just makes more sense to me.. Mid week.. Adjustments need to be made.. The very top of each cola is getting a little bit of clawing.. I'm thinking it may be time to cut back on some Micro.. Maybe even the Floralicious Plus, since they both have so much Nitrogen in them.. She's getting plenty of CalMag, and the other trace elements in the Micro shouldn't be that much of an issue.. Still gonna use the Micro.. Just cut it down from 1mL/L to .5mL/L. Maybe the clawing is just how these plants tend to grow?? I'm not sure.. I see alot of the clawing on her small side branches.. Always have on other grows too.. But maybe I've always been giving them too much Nitrogen in bloom.. Just seems more like a 'not getting light' kinda thing.. But now that it's on the top of the colas.. I'm thinking its a Nitrogen thing.. Anyways.. Such a gorgeous plant! Gorgeous colors.. Amazing smell.. Just... WOW! Lol Next day.. Ok I'm thinking the clawing is getting a little worse.. That's after I fed her using .75mL/L of Micro and about 10 drops of Floralicious Plus.. Both containing a bit of nitrogen.. I'm going to have to completely cut out the Floralicious Plus and just .5mL/L of the Micro.. I hope that doesn't cause any different issues.. It shouldn't.. And I'm going to bump up the Kushie Kush bloom booster a little.. Still not full strength but getting closer.. I hope this doesn't affect my final yeild and/or taste! I will literally cry if the taste is fucked up at all... 😢 lol.. Nah.. As strong as it is now.. I think that would be impossible! I got my new tent in yesterday.. Haven't set it up yet tho.. Gotta get everything ready to switch over soon.. It's still a 2×2.. But instead of 48" tall it's 55" tall.. Which would be a little better for taller plants (not by much.. But still better lol).. Anyways.. No more Floralicious Plus and only about half of the Micro doses (lol) that I intended to use in the first place.. She really doesn't like Nitrogen in flower.. Which is understandable.. But I've never had a plant this sensitive to it before.. Good learning experience for sure! End of week.. So I bought a Brita filter because my tap water is pretty shitty.. 240 PPM - 260 PPM.. I've only ran about a gallon through it and its barely bring it down to 190 PPM - 200 PPM.. I mean.. I also didnt use the actual Brita filter yet.. Just the Wal-Mart brand.. It sucks obviously.. When I run the actual Brita filter in my drinking pitcher.. It can bring the tap water down to about 160 PPM!!! Compared to the Wal-Mart filter.. That is fucking incredible! I'm thinking when I run a couple more gallons thru, it will hopefully bring it down a bit more.. I don't need it to be 0 PPM.. just not 260 PPM.. That's fucking insane! Our water sucks out here.. The plants dont seem to mind very much, but after using the filtered water, instead of the nutrient water being 1150 PPM its barely 980 PPM - 1000 PPM.. NOTot a huge change.. But I think it will help. For harvest, I'll use the FloraKleen once along with distilled water.. Still got a few weeks before thinking about that.. But I always flush with my tap water and can't ever get the PPM below 400 PPM or so... Now about the plant lol... Yeah, it's gotta be nitrogen toxicity with the clawing leaves.. Again, I've went down on the Micro since it has so much nitrogen.. And also cut out the Floralicious Plus.. Sometimes I'll add a couple drops.. But it really makes me nervous lol.. I DO NOT want to hurt the yeild or taste of this girlie! But she is doing good.. Just as a test, I added a little bit of some feminized pollen to a very small nug on the bottom.. Its photoperiod pollen.. But this should create a "fast version" according to Sweet Seeds.. But she is doing good.. Smelling amazing.. Gorgeous colors!!.. Anyways... On to the next week!!!...