The Grow Awards 2026 🏆
Processing
Likes
Comments
Share
@MG2009
Follow
08/29/2018 Been a hot week but the girls don't seem to mind,90s in the day 82° at night and sticky,muggy weather. Their leaves all pointing ☝️,lets me know they are happy ☺️ .watered with plain water they were pretty dry pots weight was very light. Will feed and water in in morning sleep well and medicated😎 08/31/2018 Just a note today #1 is very green compared to the other 4 plants, could be potted plants running low on nitrogen? My soil has plenty according to soil test. I know last year's crop in soil was pale like other 4 plants, maybe biochar is helping soil retain it's nutes better? Year 2 for biochar, first year could have tied up some nutes....hmmm? Ps Last feeding today Fox farms big bloom at heavy feeder dose 1/2 cup per gallon, should see nice gains this week! 🙏🙏🙏. Pss. G GTH #4 loosing her smells, #3 smells of Skunk and coffee ☕,#2 minty chlorophyll orange,#1 menthal,skunky but very lite scent. Should I pollinate a branch of each? Oh my God the pressure! Do I have enough pollen? Oh sorry for rambling on just smoked lemon sour diesel and thoughts very racy😀 Got to garden see you next week 😎😎😎😎😎😎😎😎😎😎😎😎😎
Likes
24
Share
The plants continue to grow although slowly. I turned the Gavita back on this week and even at 42 inches it seems to be too much light at full power because although they're getting adequate nutrients, the leaves appear to be showing signs of damage to the chlorophyll pigments. I'd like to splurge and get the adapter and controller so that I can dim the light and slowly increase the intensity to allow for a more gradual photo acclimation period, but I will probably hold off until my next run. I've also considered adding supplemental Co2 to help the plants more effectively tolerate and take advantage of the light intensity, but it seems like a big expense for an uncertain benefit considering all of the other variables that are sub-optimal. Perhaps I'll give those Excellofizz Co2 pucks a try. Someday I'll build sealed grow room with automated Hvac, feeding, and Co2 enrichment but for now I'll soldier on and hope for the best as the flip to 12-12 approaches. More to come next week!
Likes
5
Share
7/20/25 D64 F22 7/21/25 D65 F23 -water still in each reservoir -both EBs growing nicely 7/22/25 D66 F24 RW SB -SB reservoir empty -1 gallon water with 1/8 tsp ascorbic acid down SB reservior 7/23/25 D67 F25 7/24/25 D68 F26 RW SB -SB reservoir empty -1 gallon water with 1/8 tsp ascorbic acid down SB reservior -BB reservoir empty by end of light cycle 7/25/25 D69 F27 -going to leave BB reservoir dry until SB reservoir is dry, then top water with plain water 1 gallon each EB, after they drink what ends up in the reservoir from that watering, then I'll do a microbe top watering with fermented plant extracts pumpkin ferment and rootwise biophos -I see no sign of gnats at all in this tent so the way I used wdg3000 worked, just use after any application of worm castings or compost and taper it off until not needed 7/26/25 D70 F28 TW -added 1/8tsp ascorbic acid, quialla to 1 gallon of water -top watered BB EB -added 1/8tsp ascorbic acid, quialla to 1 gallon of water -top watered SB EB
Likes
46
Share
Hey, cannabis enthusiasts and connoisseurs! 🌿🔥 The journey with our Runtz F1 has been nothing short of legendary, and now we’re at the stage that every grower eagerly awaits—the trim and smoke report. This Runtz F1 has delivered beyond expectations, and I can’t wait to share the details with you. Let’s dive in! The Trim Process 🌾✂️ The trimming process was an experience in itself, filled with care and attention to detail. Here’s how it all went down: • Breaking Down the Branches 🌿: • First, we carefully broke down the plant into manageable branches, making sure to preserve the integrity of each bud. The structure of the Runtz F1 made this easy, with its dense, compact colas ready for precision trimming. • Trim Bin Magic ✂️: • Using a Trim Bin, we meticulously trimmed away the sugar leaves, leaving behind only the most beautiful, resin-coated buds. The Trim Bin isn’t just a tool; it’s a game-changer, allowing us to catch every last bit of precious kief that falls during the process. This extra kief is like a bonus for those special moments when you want to add a little something extra to your smoke. • Preserving Terpenes with Grove Bags 🛍️: • Once trimmed, the buds were placed into Grove Bags for curing. These bags are revolutionary in the cannabis world, designed to lock in terpenes and keep your buds fresh for the long haul. Unlike traditional jars, Grove Bags use a special TerpLoc technology that creates a perfect microclimate within the bag, balancing out oxygen and moisture levels. This means your buds cure evenly without the need for burping, preserving that incredible citrus terpene profile we’ve come to love from the Runtz F1. The Legendary Smoke 🌬️🔥 Now, let’s talk about the smoke—because this is where the Runtz F1 truly shines. • Flavor Explosion 🍊🍋: • The moment you take your first inhale, you’re hit with a symphony of citrus flavors. It’s like walking through a citrus grove with the sun shining down—notes of oranges, tangerines, and lemons come through strong, each one distinct yet harmoniously blended. But the magic doesn’t stop there; an underlying hint of vanilla sneaks in on the exhale, rounding out the flavor with a creamy, smooth finish. It’s an experience that dances on your palate, leaving you craving more. • Aroma 🌿🌸: • The smell is just as captivating as the flavor. As soon as you open the Grove Bag, the room fills with that zesty citrus aroma, complemented by a subtle sweetness from the vanilla undertone. It’s the kind of smell that makes you pause and appreciate the craft that went into growing this plant. • The Effects 🌟: • The effects of the Runtz F1 are as balanced as its flavor profile. Expect an initial wave of uplifting energy—perfect for daytime use or when you need a creative boost. As the high settles in, it mellows into a relaxed, yet focused state. It’s the best of both worlds: energizing without being overwhelming, and calming without knocking you out. This makes it an ideal strain for those who want to stay productive while still enjoying a potent, flavorful smoke. Final Thoughts and Invitation 🎥✨ The Runtz F1 has proven itself to be a true connoisseur’s strain—a perfect blend of flavor, aroma, and effects that’s both complex and satisfying. This was a journey that showcased the importance of patience, precision, and care, from germination all the way to the final cure. If you want to dive deeper into the entire process, from the first week of veg to the final trim, I’ve documented it all on my YouTube channel. Join me there for a closer look at how this incredible strain came to life, and learn more about the tips and techniques I used to bring out the best in these plants. Thank you to everyone who’s been part of this journey, from the community to the amazing brands like Gro Diaries, TrolMaster, Aptus Holland, Kannabia, and more. Your support and tools have been invaluable. Remember, the magic is in the details—so never stop learning, growing, and enjoying the fruits of your labor. Stay positive, stay curious, and keep spreading the love! 🌿💚 #RuntzF1 #LegendarySmoke #CannabisConnoisseur #GroveBags #TrimMagic #StayPositive #GreenMagic #YouTubeJourney Germination method 🌱 @thecannakan Genetics Runtz F1 @zam.nesia Runtz auto @kannabiaglobal Nutrition @aptusholland 🌿 @aptus_world 🌎 @aptus_es 🌍 @aptusbrasil 🌱 @aptus_thailand 🌿 @aptus_portugal 🌳 @aptususa_official 🍀 @aptusplanttechnz 🌺 @aptusplanttechaus 🍃 Ambient controls🎮 @trolmaster.eu @trolmaster.eu.support @trolmaster.support @trolmaster.agro Soil @promix_growers_eur @promix_cannabis LED - @lumatekeu Watering- @autopot_usa @autopot_global Love and attention- @dogdoctorofficial #aptus #aptusplanttech #aptusgang #aptusfamily #aptustrueplantscience #inbalancewithnature #trolmaster #trolmastereurope #trolmastersecrets #Autopots #RuntzBattle #KannabiaVsZamnesia #GreenJoy As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 More info and complete updates from all my adventures can be found ⬆️ link in the profile description ⬆️ Friendly reminder all you see here is pure research and for educational purposes only 💚Growers Love To you All 💚
Processing
Likes
6
Share
Essa semana engorda continua ! Esta dando uma amarelada nas folhas inferiores mais estou com fe que seja normal! Vamos aguardar esse semana agora para ver o que rola!
Likes
4
Share
I've been defoliating slowly trying to keep them small due to a house inspection coming up. Once that's out the way I'll put them in bigger pots then switch to flower. They all outgrew the mutated start and are looking good.
Likes
2
Share
Likes
Comments
Share
Likes
4
Share
What a slow grower, was the first to form budlets but now the slowest to mature. No real distinctive smell with her yet but some trichome growth was noticed. Removed a few lower fan leaves to allow light to penetrate. Should be a decent yield considering the time she's had to grow.
Likes
3
Share
Muy buena cepa, potente, productora y fácil de cultivar. El efecto fue exactamente lo que buscaba; intenté curar la yerba lo mejor que pude para poder preservar los terpenos y así disfrutar aún más. Cepa recomendada😄
Likes
13
Share
@Phaleg
Follow
In this week I can easily recognise the positive impact on the growth of moving the plants to the bigger pots, they increased the growth rate so much. #1 is 55cm tall (21+ inches), it still displays 9 pointed leaves above the internode where it started as reported in previous week diary page #2 is 54cm tall (21 inches), it displays couple leaves with 8 points and one or 2 new leaves seems to have 9 as well, I will confirm once they grow more #3 is 34cm tall (13 inches), this is the one that got problem in beginning (read previous page for more details), it is doing its best to recover and get to the same level of the other 2. I see only max 7 pointed leaves so far. Please share with me your thoughts about it, here's a n00b that likes to learn!
Likes
9
Share
@Thalps
Follow
This week has been fairly chill. Had a couple unwanted moths trying to vibe on my lights but hey, you can't blame em I guess. Watering has been fairly frequent but no real jump in intake of water. Not 100% sure when I should start the flush but will most likely make a grow question thingy about it in the near future. Other than those minor things the plant has been doing fine!
Likes
92
Share
🌸 Week 3 Flower – Growing Strong, Tall, and Vibrant! 🌱 Hey Grow Fam! It’s already Week 3 in flower, and I’m thrilled to bring you this update because these plants are doing phenomenally well! Some are stretching up so tall that I might have to get creative in the coming weeks! Fruit production is well underway, and it’s absolutely amazing to watch the canopy fill out as these girls reach their potential. Aptus Holland Pack Unboxing & New Additions This week kicked off with a big arrival: the Aptus Holland nutrient pack! 🙌 I couldn’t wait to share the unboxing with you all; there’s a video up where I go through all the goodies, so check it out if you haven’t yet! Between the photos and videos, you’ll be able to see just how well these nutrients are already feeding these green beauties. Having a blast sharing more content lately—I’m in the zone with editing and creating, so get ready for even more shares! 🌡️ Environmental Control and Fine-Tuning the Reservoir pH Temps this week have been holding around 27.2°C with RH at 65.2% and CO2 at 800 ppm, creating a VPD of 1.26 for ideal flower development. The lighting intensity is at 833 PPFD, and the solution in the reservoir is fine-tuned to a pH of 6.22, EC of 475, with a temp of 21.8°C. Let’s talk pH in the reservoir: it’s a dynamic process, and I’m constantly adjusting it to keep everything at the right level. The pH tends to rise throughout the week, and each day, I work it back down, fine-tuning it to keep those plants happy and balanced. Managing pH is truly a hands-on job, and it’s worth every moment. I love staying on top of it for optimal nutrient uptake—it’s all about consistent effort and keeping that perfect range dialed in. Leaf Maintenance & Selective Defoliation These leaves are HUGE and gorgeous, creating a lush canopy that’s nearly too perfect! I’ve been taking a few leaves here and there, focusing on leaves that may be blocking light from reaching lower parts of the plant. Selective defoliation at this stage is key because it opens up airflow and allows light to penetrate deep, boosting energy distribution across the whole plant. Big, healthy leaves mean we’re getting excellent photosynthesis, but a gentle, strategic defoliation can guide that energy toward those developing buds. Leaf removal is all about balance, giving the plant space to breathe and thrive while still maximizing growth in flower! 🌐 TrolMaster + App – Real-Time Precision Huge shoutout to the TrolMaster system and the app—keeping everything in sync and at peak performance is honestly effortless with this ecosystem. The app provides a full overview of each environmental parameter, allowing me to make real-time adjustments as needed and track trends over time. The precision here is unbeatable, giving me complete control over temps, humidity, CO2, and VPD, ensuring my girls are in a controlled paradise 24/7. What I love most is how the app records everything automatically, so I always know exactly where things stand without having to keep separate records. If you haven’t tried TrolMaster yet, it’s a total game-changer for any grow setup! 💥 Shoutouts & Gratitude Massive shoutout to TrolMaster and Aptus Holland for powering this grow with tech and nutrition that’s second to none. And, of course, gratitude to Pro-Mix for the superb growing medium and to the seed banks behind the genetics. We’re running strong thanks to each of you. And to the whole community—thank you, everyone, from new friends to seasoned followers, lovers to haters. Your energy, whatever form it comes in, is all part of this journey, and I’m so grateful for it all. Special shoutout this week to my brother Daggadna—head over to IG and give him a follow! And if you’re loving the journey, remember to like, comment, and subscribe—it really helps the channel grow and reach others who may also dig this content! Discount Codes so you can save big on your next check out 💚💚💚 Kannabia - DOGDOCTOR 30% off SeedsmanSeeds - DOGDOCTOR 10% off CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 Friendly reminder all you see here is pure research and for educational purposes only Growers Love to you all 💚💚💚
Likes
4
Share
@pzwags420
Follow
On day 1 week 3 flower I am slowly readjusting blumats after reset from fertilizer clog. The flower clusters are building. The leaves are still somewhat canoeing but it seems better since I dimmed light back to 75%. On day 4 I can tell that the stretch is over now. The girls tops are still too close to the grow lights, but it is too late to top/prune the plants so I may end up with some burnt colas. I am going to take the risk and know at the bare minimum I will have all the lower bud sites that are in the proper light intensity. On day 6 the flowers are definitely getting larger.The girls are starting to put off their blueberry smell nothing strong yet but it is building :). On day 7 the girls are doing well, i look forward to seeing the buds put on weight and smell :)
Likes
22
Share
Total Days: 70 Flower: 31 Vege growth is stopped or very slow at this point. Might eke out another inch or two. I'll raise the lights as far as they can go soon (only 3-4" for the 650w light on right), but with the higher operating RH%, I've yet to see any pistil burn. The light cycle shift to accomodate the painters definitely stressed 2 plants. One was removed. The second i am retardedly going to keep. I stripped off lower weak buds that had the nanners. Pruned a few weak axilla, too. The nearby plant pistils are lily white, so it should be fine. The pistils will be changing color soon, so that will no longer be a good way to assess the risk going forward. Meh, I know it was caused by light stress, so any seeds not selfed I'll probably keep them. Overall, I'm relatively happy with development. Need to adjust some procedures in next cycle and maybe a few more tweaks in winter 2025-1. Second irrigation went well, but i did find a partially clogged emitter. Probably a plastic bit from hold-punching. With 8 emitters per pot, the overkill makes it irrelvant and the pot wasn't the slowest to finish. A few emitters has some roughly milled inlets. I'll inspect them all over the next couple weeks and replace some as needed. Just realized my new dehum was glowing in my tent the entire time. Luckily the display was facing away but now has a cardboard flap blocking it. If it was fine before, it's even safer now. Photons had to bounce of a wall and travel 5' before it could hit any plant. ----- Early update before end of week upday: So, I've been procrastinating replacing the irrigation setup. It's slowly gotten worse each year (3rd ongoing), but never had the dripper devolve into a dribble. I've been hand-watering 1 or 2 pots the last week or so. Replacing the mini sprinkler heads only fixed 1 of the problem-pots. Think the fittings are leaking on the one that did not improve. All the pvc is gone. All the 1/4" manifolds and tubing are gone. The per plant adjustable nonsense is the worst idea ever as all it does is cause pressure changes and endless tweaking of all the little sprinklers, because changing one impacts all the others, or a speck of dirt might cause a new imbalance that requires adjustments etc - Fucking nightmare of useless repetitive behaviour. Still have the 3/4" ID lead-in, heavy duty, 450psi graden hose with ball shut-off valve and pressure regulator. That is now connected to a 3/4" wye with two 1/2" irrigation tube adapters attached to each end. This forms a loop around the pots with a 1/2" tee per pot that leads to a gate shut-off valve and eight 2-gph pressure compensating emitters - 96 in total. Will do first test run on Sunday. The great thing is that this is all plug and play when I switch to injectors. That'll require some sort of pvc manifold and check valve at the utility tub, but otherwise just connect hose, and it's golden. That's the next step. I'll also re-incorporate the wifi-enabled solenoid valve at that point. Getting rid of the 55-gallon reservoir and pump would be nice. One less thing to maintain (rez) and less things that can break down (pump / powerhead). ------ Sunday Test Flawless first run. Time will tell if they are resistant to clogging, but optimistic at this point. 18psi operational pressure at the irrigation loop. Didn't even need the regulator. The mesh strainer at the pump intake doesn't have the typical, small air-bubble, so the last setup was letting a little air in. The last setup was fatally flawed. Pressure compensating emitters for the win. They didn't even squirt wildly as the air was expelled from empty tubing on first run. Took ~4mins or so. Some pots finished a bit sooner, but that's because they don't drink as much per 24 hours. I can live with that kind of waste. I'll get the timing down to reduce water usage even further. I don't need to wait for every pot to exhibit runoff as that is beyond 10% runoff needs. Might be able to get 4 fertigations before refilling reservoir instead of 3. We'll see. I don't like the minimum ~12-15 gallons sitting over night. It fouls the reservoir faster at low volumes. Anyway, super geeked. They better not clog easily, lol....
Likes
4
Share
After 32 hours we have our first hatch. Temperature is steady at 25 °C and humidity at 80 %.
Likes
223
Share
Well growmies this one is another keeper that's for sure 👈 couldn't of asked for better Genetics 😉 My all time favorite 😉 She was a stretchy girl unlike her normal traits in the past as this is the third time I've grown her , I absolutely love the Afghan Kush 😳 😍 😅 All 3 plants are truly Amazing , I would definitely recommend 👌 The Gorilla Punch 👊 OG Kush 👌 Afghan Kush 👍 👉 Big thanks to all my Growmies out there in GD land 👈 Much appreciated 🙏 Thanks To MarsHydro for the TS1000 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34
Likes
26
Share
My first grow has been a great learning experience, and I couldn’t be happier with the results. From the reliable BioBizz soil and nutrients to the impressive performance of the Spider Farmer SF 1000, everything worked well together. Each component contributed to a successful harvest, and I’m excited to continue experimenting and improving my setup with new gear and techniques. 💚☀️🤙🏼
Likes
297
Share
@Ju_Bps
Follow
Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 Here we go my friend, time to harvest 💜🌲✂️🏁🏁 💧 No Water 💡Mars Hydro - FC 3000 50% 13 cm Mars Hydro Fan kit Setting 9 Have a good week and see you next week for the harvest ✂️✂️ Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller Fast Buds - Gorilla Cookies FF🌲🌲 https://2fast4buds.com/us/seeds/gorilla-cookies-fast-flowering