Likes
Comments
Share
@Belverde
Follow
I delayed a few days to update because the video was not loading . . . . Welcome growers We are over a month from the start with this two BLUEBERRY CHEESECAKE 🍰 The state of health is more or less the same for both, happy, with an excellent green color ⬆️ But from now on something changes, because I intend to cultivate them in two different ways Lights, nutrients and the whole environment will always be the same until the end, but, as you have probably seen in the video, at this moment one has kept the original structure and instead, with the other specimen, I have started to manipolated structure for try to maintaine all the branches approx at the same height 🌿🌿🌿 In this case topping plus a little lst (only on central stem) I only did it on one of them simply because, the larger one has more vigorous lower branches and seems more predisposed to it. I have also cut two or three leafs, not too much for now, just for increase the airflow and also again for a higher lights exposure of the lowers parts✂️ 🍃 About the lights 💡 Doing that, i have increase the potency of my two Mars-Hydro SP3000, from 25% to 50% ⬆️ The two led panel are connected with a cable and i have only to adjuste the dimmer of one of them for change the intensity of each one, in just one move.. Pretty useful 💯 In the middle of the week i have switch from 18/6 on/off to 16/8 on/off.. Always tryed to mimic the natural cycle of the sun light, works good to me 👌 Anyway.. About nutrients 👇 In this week i have giving their always organic/veganic nutrients.. A little bit of silicium (Bionova) / Activator (Biomagno) / Crescita (Biomagno) / Activera (Biobizz) / Grow vegan (Bionova) / The Missing Link (Bionova) / X-Cell (Bionova) and a little bit of P-K 3-5 (Bionova) {This last one i have used in a foliar spray solution} Like i usually do, a little bit of everything at any watering 💧 And that's all.. Another week in vegetation and then we go on flowering 🌻 See you at the end of week n°5 📆 Thank you for stopping by 😎👍 FC ✌️ 🇮🇹
Likes
25
Share
🍼Greenhouse Feeding BioGrow ⛺️MARSHYDRO The ⛺️ has a small door 🚪 on the sides which is useful for mid section groom room work. 🤩 ☀️ by VIPARSPECTRA (models: P2000 & XS 2000)
Processing
Likes
15
Share
Great Week! Girls are getting bigger and loving there new light. LST is going well. They are showing there sex and will be going into there stretching phase
Likes
17
Share
Howdy growfessors! Welcome to week 7F in the 4x8 theatre. The ladies are hungry, I've been increasing their feeding and they still want more! Defoliation performed, removed a lot of small dead or dying leaves from the lower branches. Not much else to say, thanks for stopping by growfessors 👽🌳💚
Likes
11
Share
@Jacks_Pot
Follow
This week went without any problems. They're on scedule and next week I'll repot them. I'm gonna keep 4 out of 5 because I have only room for 4 plants in 15 liter airpots. On day 12 I removed the seedling that was making the least progress. It gave me the opportunity to check the roots and they looked fine. I'll guess it will be the same with the other seedlings. I've already filled the airpots and placed them in the tent so they can heat up a bit. There's a large heating mat (RootIt 40 x 120 cm/ 15.7 x 47.2 inch) underneath the pots to keep the substrate at 21 – 22 °C (69.8 – 71.6 °F) I've given them 70 ml ph-adjusted tapwater + Plagron nutrients( amounts see above) each once this week. Once a day I spray them with a solution of CannaCure and tapwater (15ml + 150ml tapwater, ph level = 6.1) The cobs are at 68 watt with a distance of 49cm (19.2 inches) from the Pineapple Chunks giving a DLI of 19. Temperatures fluctuated between 21.7 – 24.2 °C (71 – 75.5 °F) and humidity between 51 – 94 % I've turned on the Airfan and the fan-controller is set at 30-35%. Up to next week! 🤘 Do you want to grow this strain? 👉 https://www.barneysfarm.us/pineapple-chunk-weed-strain-15 👈
Likes
7
Share
Cruisin down the highway gotta eat a lot of peaches Ready steady, 2 weeks left to fatten up those buds Gonna give them one last magsulphur feed and then its only water till harvest Keepin it simple yo
Processing
Likes
10
Share
Woop happy with how the grow is coming along had fun trimming the girls down shitting myself at the same time though😝 still on an 18/6 schedule as I didn’t want to over stress the plants following defoliation and scrog . Scrog setting up wasn’t too bad hope I done it right 😅 the screen is slowly becoming very green haha .. I’ll keep looking around on the web to widen my knowledge but for now it seems all is good my plan is to switch to 12/12 starting week 6 and around this time I should look into adding bloom to feed the autos as I’m sure they’re in pre flower stage right now but if ever in doubt I shall ask Some cool photos to look at as well Happy growing ☠️
Likes
6
Share
@kevxyn
Follow
Let’s go 🔥🔥🔥 Lampe auf 12/12 bei 60% 💡 Der Wassertank ist wieder am Start! 🌊 Sie scheint es jetzt viel besser zu vertragen. Gegossen wird nur noch ganz dezent, um die Living Soil im oberen Bereich leicht feucht zu halten. Ab und zu gibt’s ein bisschen Komposttee – alles andere holt sie sich direkt aus der Erde. 🌱 Blüte seit dem 5.11 am Start und bisher läuft alles nach Plan 😎🍁
Likes
14
Share
191 gram off dry bud and 54 gram of trim and small buds the bud lost its smell in the drying bud I'm just going make shatter with most off it I've done a trim run and am Defo please with the terps and outcome of the overall shatter
Likes
2
Share
At this point she was drinking more then 4L a day and due to the root mass that was about all i could fit in the res at the time so I had to mock up a external res and convert the system to RDWC K.I.S.S.
Likes
23
Share
What another great week!! The 5 Fastbud Wedding Cheesecake autos are looking great!! I started on veg feed this week on Monday , 1 tsp Rapid start , 1 tsp Calmag, 2 tsp micro , 3 tsp gro and 1 tsp of bloom, PH at 6.5 !! They are underneath my HLG Scorpion Rspec at 100%pwr , 49 inches to floor at Par 500-520 ! Loving it in their AC Infinity 3 gal pots ! Can’t wait to see these babies in their prime!! 😍😍 Y’all have a great amazing safe weekend and don’t forget Peace, Love, an Positive Vibes to you all beautiful ppl! Happy grows ✌️💚 Cheers
Likes
7
Share
3/8 - We're at 66 days and she continues to grow wider and denser a few days after I defoliate. The tent real estate is pretty tight right now, so I'm shopping around for a 4x4. After looking at other GL diaries, this strain is known to grow huge! I'm just anxious as to when I'll start seeing buds! 3/10 - Goldie is definitely getting some sunburn on top so I've raised the lamp a few more inches and she's now about 20 inches away and the lamp is dimmed to 75%.. gave a good nute-filled watering with cal mag. Fourth flowering week, so I'm guessing 4 more weeks? I still don't see any developed nugs yet. She's going to be a biggun'!
Likes
4
Share
@MainGrown
Follow
Frosty and hard nugs. Smells kushy and a bit creamy. Woody, Full taste.
Likes
2
Share
This strain stretched about 12” per week up until flower.
Likes
183
Share
Germination date 🌱 12/07/2021 Day 64 16/09/2021 Strain 🍁 Ethos Genetics Banana Hammock R1 (Mandarin Sunset x Grapegod) THC% • Unknown 💡 Mars Hydro FC4800 • Power draw 480W + 5% • Max coverage 5 x 5 • LED 2070pcsSamsungLM30B1&Osram660nm • Max Yield 2.5g / watt • Noise level 0 DB • Removable Driver +2m cable • Daisy chain (multiple lights) https://marshydroled.co.uk/products/mars-hydro-fc-4800-led-grow-light-samsunglm301b-commercial-greenhouse-medical-indoor-kit 🇬🇧 https://www.mars-hydro.com/buy-fc-4800-480w-4x4-energy-saving-full-spectrum-commercial-led-grow-light-mars-hydro-for-sale 🇺🇸 PROMO CODE • (ORG420) DISCOUNT 👍🏻 marshydroled.com ⛺ Mars Hydro 120 x 120 x 200cm 📤📥 AC infinity 6inch 💧 10lt dehumidifier ❄️ 3.1kw air con system 💉 Nutrients GreenBuzzLiquids Organic Grow Liquid • 1-4ml until 2wk flower Organic Bloom Liquid • 2-4ml flower stage Organic More PK • 2-4ml +wk3 of flower Organic Calmag • 1-2ml/lt whole grow Fast Plants Spray • first 3days at night lights off More Roots • 2-5ml veg +2wks flower Fast Buds • 5ml +wk2 of veg until 1wk flower Humic Acid Plus • 2-5ml whole grow Growzyme • 2-5ml whole grow Big Fruits • 2-5ml flower stage Clean Fruits • 5ml flush 1wk Ph powder Root Gel Living Organics PROMO CODE • organicnature420 15%off ✌️🏼 https://greenbuzzliquids.com/ 🥥 Growing Media • Coco Coir Notes 📝 Girls look healthy and still only feeding every 2days. They are becoming more thirsty so will up water intake next week. Onelove GD 💚🌱🍁 Remember PROMO codes for both GreenBuzzLiquids and MarsHydro.com in the grow bio above 🖕🏼 Happy growing fam ❤️🌱🍁👍🏻
Likes
24
Share
Middle 2 plants stretched a lot week 3 of flower. They were growing slower in veg so I flipped to flower as soon as their canopy reached the net (barely LST these 2 plants with the net given their slower growth). Then week 2-3 of flower they took off. Did some defoliating to expose bud sites further down with the intent to increase yeilds.
Likes
54
Share
~ AirCube Active Oxygen Ebb/Flow System sponsored by GrowAce, featuring Strawberry Gorilla Auto by FastBuds ~ Well guy's and gal's here we go again on another exciting Autoflower run together! This time will be different as I will be doing a 'Hydroponic' run utilizing the AirCube Active Oxygen Ebb/Flow System by GrowAce, who were kind enough to sponsor me for this run, so it should be interesting to see what results I get and have some fun along the way! •Let me first tell you about this 6 Pot Ebb/Flow system from GrowAce: "The AirCube system is the one and only Ebb & Flow grow system on the market that combines the benefits of air pruning with a fully automated Ebb+Flow system! With the AirCube's proprietary fabric pot in bucket design, this system is guaranteed to outgrow any other Ebb + Flow system on the market. The results speak for themselves- grow MASSIVE roots that result in MASSIVE fruits! Air Pruning- Air Pruning only happens with fabric pots. As the roots reach the fabric walls of the pot, they penetrate and grow into the breathable fabric. Once penetrated, the roots are exposed to air, which causes the tips of the root to dehydrate and naturally prune themselves. This natural pruning process forces the roots to grow tons of lateral fibrous feeder roots. This results in a plant that utilizes the entire root zone and fills the entire pot with tons of roots. These fibrous feeder roots are incredibly effective in uptaking water and nutrients, resulting in a plant that grows healthier and more vigorously! Oxygen Benefits- Without oxygen, nutrient absorption cannot occur. On a molecular level, oxygen is needed to transmit nutrients across the cell walls and into the roots of a plant. With the AirCube's proprietary bottom lifted draining design, the system actively draws all of the water out of the bucket pulls vital oxygen into the root zone. Maximum Versatility with Any Grow Medium: The AirCube System is the only system on the market that allows you to use any growing medium you like. Use coco coir, soil, peat moss, perlite, vermiculite, hydroton, rockwool or any other medium you wish! This system is the most versatile Ebb and Flow bucket system in today's hydroponics industry. Temperature Control- with the fabric pots constructed with highly porous polypropylene fabric, heat dissipates easily and effectively. Unlike standard plastic pots, heat isn't trapped in the root zone. Heat in standard plastic containers can reach temperatures of up to 125 degrees. When this type of heat is trapped and unable to escape, it can damage your plant's health and limit the potential of your harvest. Growing in the AirCube System, plant roots grow cooler, healthier, and more vigorous. Largest Pots in its Class- this system features 5 Gallon grow buckets, the largest pot size of any other ebb and flow hydroponic system in the market. Modular and Expandable- start with 6 grow buckets and expand up to 36 grow buckets with the optional 105 gallons PopTank reservoir!" For my medium and nutrients I decided to also switch things up from my regular Organic runs, going with Plagron Nutrients and Root Royale 70/30 Coco/Perlite. When filling the fabric pots with medium, I first added just under a gallon of horticulture perlite from Nor-Cal as a base layer to ensure good drainage and then filled the remainder with the Root Royale. •Now for one of my favorites, and award winning strain from my friends at FastBuds... Strawberry Gorilla Auto: I'll be running Strawberry Gorilla Autoflower which is a 55/45 Sativa/Indica Hybrid. "ATTENTION ALL! Due to our continuous efforts in evolving our breeding process, we are proud to confirm that our Strawberry Gorilla Auto has now become one of the most potent autoflowers in the world! Paving the way to our recent success where she ranked on top & brought home the gold at the very first American Autoflower Cup in California. Moreover, she proved that not only modern autoflowers can compete with photoperiods, but they can even beat them in their field. At the most recent edition of the Farmer’s Cup and competing against various photoperiodic strains, Strawberry Gorilla Auto took home the title of 'Highest Combined Terpenes' in the highly sought-after 'Home Grow Hash' category, with an impressive 97.163 mg/g total terpene content! Our exceptional genetic selection's crowning Strawberry Gorilla Auto strain is a spectacular hybrid known for producing yields of up to 600 gr/m2 in 70 days. This is a very manageable grow that can reach heights of up to 150 cm - due to its magnitude we recommend it for more experienced growers, as a huge plant may be a little overwhelming for first-timers. This show stopping sativa heavy hybrid is perfect as an all day smoke, producing a taste bud tingling, pungent berry and diesel terpene-rich flavor combo that leaves you with a grin from ear to ear, a perfect choice for those looking for a day-and-night autoflower! "* *References: GrowAce.com, 2fast4buds.com ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ The Setup: • AC Infinity 4x4 tent •AC Infinity Cloudline T6 Exhaust Fan w/ Controller 67 •HLG 650R w/UVA Bar *** For some reason GD does NOT have a listing for the USA version of the 650R so I selected the closest match to it. •AirCube Active Oxygen Ebb/Flow 6 pot System •TrolMaster Hydro-X Controller for light •AutoPilot APC8200 co2 controller fed by a 50# tank •16" Hurricane oscillating fan and 8" floor fan •Tent cooling via filtered outside air delivered by AC Infinity Cloudline T6 fan •BlueLab instruments: PH Pen and Truncheon Nutrient Meter ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 11/29- Here we go into Week 4 of flower for the FastBuds Strawberry Gorilla's and I wish I could say they are looking epic, but that's not the case. The #2 plant continues to be ahead of the other two, and is really frosting up nicely. The #2 and #3 plants look pretty crappy, and after examining some other plants in the tent I've got a good idea of the issue. The fabric pots that the plants are in are supposed to 'air prune' the roots, preventing them from growing outside of the pot, and instead growing a large mass inside of the pot. I pulled one of the pots from its bucket and it was disgusting, with rotting clumps of roots in the bottom of the bucket along with some nasty looking brown slime. The fabric pot also had roots growing out of it, along with that brown slime across the bottom of the pot...ugh! 12/1- Tomorrow I'll be doing another drain/clean/fill of the reservoir, after which I'll add Plagron Cocos 'A' & 'B' along with Green Sensation and Royal Rush. After adding the nutrients I'll ph the solution to 5.6-5.8 @ 70℉. 12/3- Yesterday I did the drain/fill and continue to have the Plagron nutrient level at 800ppm. The #3 plant continues to struggle, but nevertheless is flowering away and actually has pretty decent trichome production, which I wonder if the stress she's experiencing has an affect on either positively or negatively. 12/5- There is four weeks of flowering for the Strawberry Gorilla's. Although they sure could look a whole lot better, they for sure could look way worse. Hopefully, they'll start to look a bit better in the upcoming weeks... fingers crossed! 😎🤞 💚 Thank you for checking out my passion in life! Please visit as often as you wish and I hope you enjoy this journey as much as I know I will! Grow what you love, Love what you grow!💚
Processing
Likes
4
Share
Flip the script to 12/12 waiting on a small tent via amazon to put my MILF in so I do not contaminate the other ladies, clones are hanging in there hope they will be ready to go into flower at 21 days. I just potted up to a 5 gallon fabric pot. They were drinking so much they were dry in 1 1/2 days. gave them a mild feeding and a good watering did not want to give to much trans nuites this week as I just lolly popped and potted up on the same day they look healthy enough to take it but I did not want to over whelm them with the food. so the plan moving forward it to start spraying MILF A in her own tent while the others flower in the big tent then the clones will move in to the tent and flower for 3 weeks all the while spraying MILF A 2 times a day with the CS the hope is by off setting the clones and the mothers by a week the MILF at 4 weeks while have Feminized Polled sacs that will be ready to sprinkle on the clones the other to mothers will flower to completion be chopped and dried and the clones will go until the seeds are mature with in an extra week or two. Stay Safe🙏 I will post more pics this week end.