The Grow Awards 2026 🏆
Likes
Comments
Share
9/10: The bigger one is the 2nd biggest seedling in the garden. The small one has great form and should catch up eventually. I'll prob transplant them in several more days. 9/11: I waited to long to transplant them and they have root problems to some degree or another...too wet for too long. I transplanted the bigger one into a 3 gallon pot and the smaller one into a 2.30 gallon pot, and observed about 50% brownish roots on the bigger one. 😕 I powdered the planting holes with myco, tricho, and other goodness. I added two Mars Hydro 150w lights, and a 60w 6500k LED panel light since they are all spread out now. The average CCT is still a little over 4800k, even though the Mars are a little warmer color temp than the Viparspectras. 9/12: Between the root problems and the transplant, they looked horrible, so I sprayed them with BoomBoom Spray today and will do a good root drench tomorrow with BushDoctor Boomerang. They looked better by the end of day, but still have a ways to go to get back on track... 9/17: I fed them boomerang only twice this week, and gave also them kangaroots yesterday. They are both looking strong and branching well. The smaller one is catching up quickly now. I'll prolly flip to 13/11 with emerson effect in the next couple of days.
Likes
1
Share
had to cut her very early because of some mold problems, but had about 50-60 grams of amazing, organic weed from this plant!
Likes
13
Share
Elle ont été transplantés en début de semaine avec promix conect. Wow tout un effet . Elle ont doubler de grandeur . Les odeur son vraiment fort pour des plante qui ne sont pas encore en fleuraison . Très skunky et fleural. Encore quelque semaine à se faire travailler avant le switch en 12/12
Processing
Likes
2
Share
Since the pot has a volume of 30l it takes a lot of time to create a big canopy. The plant also needs alot of time to fill up the container with roots. No extra nutrition in this week.
Likes
34
Share
@MrGrow
Follow
29.07.2023 🌱 110 giorni dal seme 🌼 17 giorni fioritura 💦 1.8 litri/48h 📈 ph 5.9 ec 1.6 Le piante stanno benone! Si sono allungate molto durante le prime 2 settimane di fioritura ma ora hanno smesso di allungarsi e vedo molti siti di fiori ovunque. La white widow è qualcosa di incredibile.. non vedo l ora di vedere i fiori crescere😍
Likes
8
Share
It’s almost time! This week both plants are getting flushed to prepare them for harvest. 🌱 After that, they’ll be cut down and hung up to dry. #2 has developed an absolutely massive main bud — honestly the biggest I've ever had so far! Meanwhile, #1 stands proud as the tallest plant in the tent, still giving off that amazing sweet, tropical aroma.🍍🍬 Both plants have shown a very fast flowering time, finishing up quicker than expected! Upon checking the trichomes, about 65% are milky, 30% amber, and 5% still clear — exactly where I want them for the effects I'm aiming for. Super excited to see the final results after the dry and cure💚
Likes
1
Share
@TheCH
Follow
Срезал после 5 дней засухи и 48 часов темноты. Сушил в боксе 4 дня в полной темноте. Результат: 152 грамма шишек и 57 грамм попкорна. Пахнет вкусно. Дым попробую через месяц лечения. Недельку побуду в холодильнике. Открываю банки раз в день.
Likes
5
Share
Así termina nuestra preciosa Kerosene Krash, llena de flores pesadas y resinosas que doblan sus ramas laterales del peso. Ahora toca cosechar sus increíbles flores para proceder al secado y curado. Espero que os guste,un saludo!
Likes
26
Share
🌸✨ Hey friends, exciting news! 🌟🍀 We’ve hit Week 11 of the flowering stage, and our girls are absolutely thriving! 🌿💎 Their growth is on track, and everything is going just as we planned. With the 12/12 light cycle ☀️🌙 in full swing and regular doses of flowering nutrients 🌸💧, they’re transforming beautifully. The buds are starting to take shape 🌟🌸, and the plants are bursting with energy and potential. It’s amazing to see their progress, and we’re thrilled to share this journey with you! 🚀🍃 Stay tuned—things are getting exciting, and the bloom of a lifetime is just around the corner! 💚👊✨
Likes
4
Share
09/07 - Reveg still in process - Mother plant in recover from clone clipping - unhealthy clones disposed - cutting new clones this week - Myco and Superthrive feed increased - Net dropped an LST.
Likes
41
Share
@Rwein93
Follow
Hi, I started my first cultivation with this fabulous Gorilla Glue Auto variety. I transplanted the sprout in subtrate I prepared by using it: 70% BioBizz Light mix 20% earthworm humus 5% coconut fiber 5% perlite 30g Nutrihemp 125g Gurumix At the time of transplanting I then added 1g of Mycor mix to the bottom of the hole. Now the seedling has 7 days of life I hope it can grow healthy and strong and give us an excellent harvest 😉
Processing
Likes
6
Share
Today marks week 9 of the red poison auto flower. I started the flushing process this week. The Trichomes were starting to get milkiy on week 8 so I decided to flush the plant since I am looking for 65 to 80 % of milkiy for my final product. I am going to flush for 2 week for the best results (in my opinion) since the medium I am using is soil. Instead of feeding her nutrients on October 16 2019 I just gave her the 1.5 gallons of PH(FOR SOIL 6 - 6.8) water with molasses.. I checked the run off water and the PH was 6.8 and my PPM was high at 1336. So on October 19 2019 I did a extreme flush of my auto in a 7 gallon soil pot. (I have tried flushing with certain agents in the past but from my experience and opinion I feel that flushing with just PH water works fine.) Well I flushed the plant down from 1336 to 336. I would have preferred a PPM level below 200 but the water I am using has a PPM level of 270. I actually ended up using 18 gallons of PH water to flush the plant in order to bring the PPM down from 1336 to 336. The PPM kept kept going down and then back up again after every flush so I had to keep adding gallons of water in order to make sure that at least half of the nutrients were washed from the soil. From this point on I will no longer feed her nutrients. I will just give her the regular amount of PH water I've always given her except the only difference is that I will no longer add nutrients to the water. The only thing I will add is molasses in the PH water in her regular feeding schedule. I am hoping to harvest around the 26 of October.
Likes
15
Share
Moved into 2x4 - adjusted PPFD from 250 to 190. Light stress. - worried over red Clover mites. Captain Jack’s,
Likes
15
Share
2/1/2024- Pre-Germination Activities Day 1 I have 21 weeks until final photo is do.. I took 3 seeds out of cold storage and will let them get to room temp for the next 48 hours before I go with Glass of water for germination. I have 3 beans because I will start from the very beginning helping ensure I present the best Pheno. This is going to be a fun one.. I am a few days away from being able to clear my tent out for this run.. I have a breeding run in right now and the Seeds are a few days away from being mature enough for me to take down the girls. Once I get them down I will need to get my tent cleaned up and turned over right away. This is going to be close, I will have to time them to the water and into the tray at the right time.. because I will need to get lighting on them right away.. I have my 2X2 and my light ready incase I need to hold them in the cloning machine if the others are not done in the next few days.. Glad I have options that can stretch me out for a week or 2 to give me a little more time. 2/2/2024- Pre-Germination Activities Day 2 I checked on my breeding run to see how close the seeds are and if the tent is ready for me to clear and clean but alas I am still going to need a few days. I setup the emergency 2X2 and that should give me 2-3 weeks. The plan is to still wait one more day to allow the beans to warm up to room temp and then drop them in Water sometime tomorrow. Form my Emergency 2X2 I have the following: 4" inline fan and carbon filter Fan VS-2000 light 2/3/2024- Germination Activities Day 0 - Dropped the Beans in.. Today is 0 day.. Go.. Go .. Go.. 2/4/2024- Germination Activities Day 0-1 - Checked in on them this morning and no tap roots yet.. covered them back up and back in to the closet they went. I setup the Root Riots and the Seed tray for them. I Ensured my water that I was soaking the root riots in was PHed to 5.8 and I used RO water. Afternoon Update: Checked on my Breeders and they are done. I started to harvest them, I took down the one I had reversed with STS and I took down the Black African Magic- All but one bud, I wanted to get some pics of that one today. I was only able to get 2lbs into the Cannatrol because I had to be very careful to keep the bud from the plant that was treated with the STS separated from the other seeded bud that was pollenated from the plant I reversed. Cannatrol could have held an additional 2oz of wet but not today. Ideally I need 1 more Cannatrol so I can take an entire Tent, but will figure that out. I put an additional 1.5lbs into the freezer to wait it's turn into the Cannatrol, I would have left it on the plant and taken it in 4 days when the dry cycle gets done but wasn't sure how much 2.2 lbs was equivalent to chopped and wet trimmed. 2/5/2024- Germination Activities Day 0-2 - Checked in on them this morning and 2 of them have very small tap roots out.. one still doesn't going to give them some more time. I will check in on them this evening and see if they are more open if so I will transfer the ones that are ready to their medium and seed tray. 2/6/2024- Planting Day TRUE Germination Day 0- Checked in on them this morning and all 3 of them have tap roots out. I broke the bottom of the tap root for #1 which was the biggest.. pretty sad.. I hope she survives.. I tried to be careful it just snapped off when I was trying to get it in the root riot right. Other than that all three are now in their in-between home in the 2X2 while if finish clearing and cleaning out their forever homes. 2/7/2024- Germination Day 1- Checked in on them and no surprise no sprouts yet. Sprayed the dome to moist it and light spray to the tops of the Root Riots. 2/8/2024- Germination Day 2- #3 is popped and it looks like #2 will be popped by this evening.. I got my second Cannatrol today so now I can take down the rest of the tent and get it into the dry/cure. 2/9/2024- Germination Day 3- #2 is popped as well.. so I have #2 and #3 up and still waiting to see on #1 but that might be a loss since I accidently broke off some of the Tap root when transplanting. 2/10/2024- Germination Day 4- #1 has Popped... We have ignition on all 3.. YAY!! I finished clean up and install of RDWC system, this time was unique the back left buckets 3 inch pipe wasn't seated correctly so I had to clean up about 12 gallons of water all of the floor. I also had two leaks coming from one of the Waterfall return junctions, this is why I do a full pressure test before I put anything in. I will continue to monitor it through tomorrow to ensure that I am good to go and then I will finish setting up the baskets and prepping the water to be ready for the ladies planting day!!! 2/11/2024- Germination Day 5- #1 Of course is going to be my trouble plant.. No matter what If she lives through planting in the system and making it, I think I might not cull her at all regardless, she has been such a problem, makes me wonder if she will be super worth it towards the end.. We will see as we go through this grow, but #1 has a piece of the shell on the leaves, Other than that I set up a new thing I have been doing since last grow converting my Baskets into Sure plants so I can see exactly where the water is when I plant them and ensure I have the water up high enough that they are able to access it and grow but not too high were they are drowning. 2/12/2024- Germination Day 6- Everything seems to be going good.. will just keep them moist and let the roots grow for a few more days before I transplant to forever home. 2/13/2024 - Germination Day 7- Just keeping them Moist. 2/14/2024 - Germination Day 8 - Planting day.. they are now in the system.. :-)I had to fill the water to the bottom of the basket where I could see water on the bottom rocks and just coming up where I had created my whole/ sure plant. 2/15/2024 - Germination Day 9- Top fed just a little to keep them moist and encourage root growth towards the water. I ensured the PH is right at 5.98-6.02 range. 2/16/2024 - Germination Day 10- Top fed just a little to keep them moist and encourage root growth towards the water.
Likes
16
Share
Likes
32
Share
Entrando en prefloracion, mucho calor pero aguantan bien
Likes
5
Share
Se me descalabro el medidor de ec, otro dwc que estaba a más de 3 de ec . Calibre el medidor y solucione el problema.
Likes
14
Share
FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA (NEW) STRIVE NUTRIENTS 💪 Thanks for taking the time to read and check out my diary🤜🤛 ATTENTION GROWERS!!!! BEWARE OF A SCAM COMPANY.... GREEN BUZZ LIQUIDS WILL SAY THEY WILL SEND FREE FERTILIZER BUT THEY MAKE YOU PAY THE SHIPPING WITHOUT TELLING YOU AND THE AVERAGE SHIPPING PRICE IS $100. AND THEY WILL GET ANGRY AND RUDE. THEY TOLD ME TO SUCK IT UP AND BITE THE APPLE🤬🤬 AND THEY TELL ME THIS RUDE BS AFTER THEY TOLD ME I NEVER EVER HAVE TO BUY OR WORRY ABOUT FERTILIZER EVER AGAIN. THEY ARE A RUDE, LYING GARBAGE COMPANY 🗑️ POOR QUALITY NUTRIENTS WITH VERY POOR AND RUDE CUSTOMER SERVICE AND NOT WORTH THE PRICE FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍
Likes
6
Share
I am so excited to grow this Mexican Airlines from @420fast_buds. She is About twelve days out of The Dirt and is doing excellent. But I wouldn't expect anything less from the peeps at @fast_buds. She is looking super indica early on. Can't wait to see how it goes. See you guys back here next wee for another update ( if not sooner)!!! Peace and love