Vote Now 🏆 for the Grow Awards 2025!
Recommended
Likes
Comments
Share
Everything is looking good and doing good . Not bad for my first run . Also I would love to know about any nutrients that you use . Looking to try new ones so leave a comment .
Likes
16
Share
5/27/22: - Today makes 4 weeks since sprouting! 5/30/22: - Transplanted today into an earthbox with 14ft Build a Soil 3.0 Recipe. Have a light watering as well. Added Mykos to the transplant hole. 5/31/22: - did some training to bend branches to get lower nodes some light and to level out canopy before adding trellis net. 6/1/22: - Gave a foliar spray today with Build A Soil Quillaja Wetting agent, Horticultural Aloe and Horticultural Coconut - Top dressed with silica, craft blend, worm castings and kashi blend. All from build a soil 6/2/22: - filled up the earthbox resovoir for the first time today. - increased light to 90% ppfd around 500ish
Likes
3
Share
@AndrewC
Follow
So this experiment is going terribly! LOL This ulitmately taught me a few important things about this sytle of growing. 1.) My Frequency was way to high in the beginning. When i start over next, i will be going for 1 hr -> Spray for 1 min -> Wait 1hr (Repeat) 2.) Never reuse hydroton or CC. It ends up having left over material and nutes in it, which not matter how much you wash just make the soil a land mine of nutrients etc. 3.) Do no use rockwool cubes inside the medium, they hold onto water for too long leading to rot. 4.) Fill the buckets up right until about 2cm short of the nozzles that spay. Otherwise you lose too much water and nutrients to the misting, which spreads your nutes all over the enviroment. Ultimately, even though this is a living disaster, I have learnt valuable lessons, and who knows, some of them still might produce smokable flower!
Likes
4
Share
Top dressed with 1.5 Tbls of Terp Tea Bloom and Microraza. Watered in with rain water, blended aloe leaf, & Fish Sh!t. 1/2 gallon each, no runoff.
Likes
81
Share
~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 💪😺 5th week of flower!!! Things are going great in this tent, a couple brown calcium def spots forming in a few areas and as it goes we're currently out of cal-mag lol, we should have more delivered in about 2 days...I really like the structure of these plants, a few long (fat) colas always make for easy cleaning/drying and the SP-3000 gets in there deep..we could never run this close together under our old LEDs or without bending them sideways but we've had no issues yet keeping everything vertical under the MarsHydro...The temps are a little high and we're still watering this tent more than the others but airflow is really good and the plants seem happy for now....we removed a bunch of lower growth from most of them this week so they'll put that energy towards the stuff on top and minimize "popcorn"..the smell is just amazing, this is a very hearty and beautiful strain..I'm happy we were able to grab a half dozen clones..all the Widow clones we took are well into veg at this point ...💪🐱🌱....we live in zone 5 (US) and are limited on what we can grow outdoors but I think with these being a "fast" strain we could flower them all outside..we'll play it by ear lol..well thanks for taking the time to read my ramblings, we'll update if anything exciting happens midweek...have a safe and happy Memorial Day (US) Growmies!! ❤️💡🌱😽💨 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_
Likes
16
Share
Inicio de su 7ma semana, están muy grandes y bonitas. Actualizando ya casi terminando su 7ma semana se ven muy sana y fuertes. Espero con ansias el resultado de este cultivo.
Likes
13
Share
Piękny kolor aż czarne . Zapach Mocny . Działanie odprężająco. Bez jakiego kolwiek treningu okolo 15-32 g suchego z rośliny nie ma tragedi ale spodziewałem się więcej
Likes
9
Share
@Cultivate
Follow
Week 3 of flower stinking dank!😂 Some heavy heavy defoliation slight lollipoping to increase that light power hoping for just nice bud development but we will see! Thanks guys!
Likes
9
Share
@Cultivate
Follow
Week 3 of flower stinking dank!😂 Some heavy heavy defoliation slight lollipoping to increase that light power hoping for just nice bud development but we will see! Thanks guys!
Likes
7
Share
a few days ago the soil probably had a pH value that was too low.. this was shown by the fact that the plants showed a Calcium-defiency. I solved this problem by pouring hard tap water with a pH value of around 7 once. Now everything looks very promising. although we are already through with the third week of flowering, my biggest one has grown from 41 to 48 cm the photos were taken before watering.
Likes
14
Share
FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA (NEW) STRIVE NUTRIENTS 💪 Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍
Likes
Comments
Share
Likes
9
Share
FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
Comments
Share
Likes
Comments
Share
@lil_a
Follow
Likes
9
Share
@Chupadeos
Follow
Ellas dejaron de crecer y esta semana solo aumentaron 2/4cm en altura ,pese a que hace mucha calor ellas siguen floreciendo perfectamente,están comenzando a tener bastantes tricomas,ellas continúan demandado mucho abono,veremos qué tal empiezan la segunda etapa de floración,sweet seeds nunca falla
Likes
Comments
Share
Likes
9
Share
I cant fix the damage that was done but they are putting on a little weight and the Trichomes are starting to amber up say 15%-20% i think i can push it one more week. I will give 2 days of dark on Wednesday and chop at week 10-11 as i put them into flower on 3/20
Likes
8
Share
Things still chugging along nicely. Noticed a little leaf tip burn on one but its not bad at all. Gave one feeding of only water. Plants need to be defoliated a little. I have not been taking leaves off every day so I am in need of some clean up. Will tackle that this week. If at any point you guys wanna check out my grow live please visit my Youtube page https://www.youtube.com/channel/UC7345iXI2LnTIG1mmONKtPQ Thanks for visiting my Grow!
Likes
4
Share
@Rinna
Follow
Did a strip/defoliation on all of them. She's catching up with the rest nicely and looking great. Will be feeding them all Terra Bloom from now on, still no mildew or bugs thanks to spraying cannacure weekly. Also, the subtle colors I spotted (hard to get a clear pic) are developing nicely, but some leaves are turning, twisting and curling, my first guess is that I've overwatered her, she's quite a bit smaller (more 'skinny', and flowering slower) but I've been watering here the same as the other two, might need to let her dry up a bit longer than the others.
Likes
Comments
Share