Wedding cheesecake FF by Fast Buds Germination, days: 3 Vega (18/6), days: 35 Flowering (12/12), days: 64 Total, days: 101 Ec 2.5 (Athena bloom, Fade, Cleanse, Balance) Ph 6.1 Red 100% Blue 25% UV 20% DLI ~32 T. Day: ~25C T. Night: ~21.5C Humidity: ~57% T.leaf: 24.5C Week progress. Two slow plants are still lagging behind, the video shows what a variety of phenotypes, it is very difficult to grow. I plan to harvest in a week, afraid that if I'll do not cut then buds will start to turn yellow. I probably won't keep the two lagging plants longer because the box is needed for drying. The smell is similar to sweet strawberries.

They weren't kidding about the preflower growth, they are absolutely exploding!

Day 42 Just trying to pull through till harvest. Got a couple more weeks to go.

Day 35 - few pics and vids..... everything going along nicely 👍 This is a pretty big update, so i'll add to it over the next few days, as i finish building it all.... i'm building these 2 x SS haze, the full tent, just finishing up the setup..... trimming them, changing solutions to 12/12 and flower..... changed the exhaust fan and filter setup to the better outside the tent method.... and installed 12v CPU computer fan, lol ("alta9" fits in 4in ducting perfectly), drops wattage on extractor fan.... 10w tops... got a few kg of active carbon and making/replacing the carbon filter .... i'll add afew vids of the new setup in afew days... Day 36 - few pics/vid of new tent setup...... "alta 9" fan :) post tomorrow after i finish trimmin and settin up night mode etc...... and into tomorrow we go, lol ... Day 37.... slowly getting there..... little bit more to go... this should make things abit more interesting..... right tank (short babie) has : 19 lts of tap water @18oC + 150 ml -dutch master one gold FLOWER.... 6.4 PH - 1400 PPM left tank has : 19 lts of tap water @18oC + 50 ml of elements a and 50ml of b and 10 ml of nitro and 20ml of Crystalic (molasses/pot) .... 6.5 PH - 1200 PPM more pics / vids of the finished tent setup.... roots, transfer, etc... Day 37 is alot of vids of the clean and change to flower..... edit - day after build noticed left tank (nutrifield) not enough bubbles..... pulled out the 4 air pump and swapped to the 2 x original oxipumps... much better, also to fix the problem with ph goin high, and bubbles not stirin the mix, was to add another 10ml of crystallic and another 5ml of nitro... then pumped both tanks with ph down and set em to 5.8-6.2 - both plants have fully recovered from the big trim, and bounced back within 12-24hrs, post pics/vid in abit..... Day 39 - made a freaky video... was curious about what the plants would see looking up at the lights... the lights and buzzing of air compressors and bubbling tank water, and dazzling lights turned out pretty cool in vid editor, was in selfie mode.... and final vid of the bounceback from trim :) 👍😎

SO this is my second grow of this strain, this plant shared a 120x120 tent with another Magic Melon and 2 Gorilla Cookies from Fast Buds (Amazing Strain) Very happy with large feedings, and now that she is alone in the tent, I can publish some good information about this strain as other diaries for this strain do not seem to do it justice. From previous grow, which was summer here so 40 degree C days, was growing at around 33C and obviously feeding it around 2.5 litres a day - but she did it and the smoke was great, this time around since the temps are in the normal ranges, Im hoping for less terpene loss and a much better smoke, great strain from HUMBOLDT - Im guessing this harvest will be in the 150 g Dry Weight Range, the previous 2 I grew in Summer at those very high temps yielded 220g between them.

******************************************** Week 16 Fade (week 10 flower) ******************************************** Light cycle=12/12 Light Power=120w 50% Extractor controller settings (during lights on). High temp= 25c Temp step=0c High Rh= 50% Rh step=0% Speed max=10 Speed min=5 Extractor controller settings (during lights off). High temp= 21c Temp step=0c High Rh= 55% Rh step=0% Speed max=10 Speed min=5 Smart controller settings (during lights on). Lights on=9.00am Radiator on= -22.c Radiator off=+22.5c Top fan on= Smart controller settings (during lights off). Lights off=9.00pm Radiator on=-19.0c Radiator off=+19.5c Top fan on VPD aim=1.0-1.4 DLI aim=30-40 EC aim=0.2-0.8 PH aim=6.0-6.5 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 NPK= 0-0-0 Method= Automatic Feed=Finishing nutes. Neutralise=0.1ml/L Flawless Finish=2ml/L Easy Ph down=0.02ml/L (1ml=24 drops, 1 drop=0.04ml) Easy Ph Up=0ml/L (1ml=24 drops, each drop is 0.04ml) Ec=0.34 PH=6.1/6.0 Runs=18 Run times=4mins (L/L each) Gap times=16 mins Total runtime=72mins(L/L each) Total flowrate= ml/min(ml/min each) Auto start time=10.00am Auto stop time=15.44pm 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 ******************************************** ******************************************** 📅19/1/25 Sunday (Day 106)(flower day 66) 📋 💧 Automatic finishing nutes Ph down=0.01ml/L, 2 drops Ec=0.3 PH=6.4/6.3 Volume=8.0L Volume left=2.5L Volume used=5.5L(90ml/min) Volume each=5.5L(90ml/min) Runoff. Total runoff=0.8L Ec=1.9 PH=/6.7 💧 📅20/1/25 Monday (Day 107)(flower day 67) 📋 Tops are ready, lowers not far off. Going to decide if im just going to harvest the tops and let the lowers mature a bit more, I'll check again in a few days and make the decision. 📅21/1/25 Tuesday (Day 108)(flower day 68) 📋 📅22/1/25 Wednesday (Day 109)(flower day 69) 📋 💧 Automatic Water (Neutralise) Easy Ph down= 0.01ml/L (2 drop total) Ec=0.15 PH=6.4/6.4 Volume=8L Volume left=2.75L Volume used=5.25L(90ml/min) Volume each=5.25L(90ml/min) Runoff. Total runoff=1.3L Ec=1.3 PH=/6.8 💧 📅23/1/25 Thursday (Day 110)(flower day 70) 📋 Small defoliation 📅24/1/25 Friday (Day 111)(flower day 71) 📋 📅25/1/25 Saturday (Day 112)(flower day 72) 📋 That's it for miss Zoap, she has matured as much as I want so she has got the chop today. ******************************************** Weekly roundup. 📋 She has bulked up enough now. Shame I can't get more light to lower parts of the plant. Back soon. Take it easy. ********************************************

159 Its been a rough week in flowering. She got super shocked and also I added way too much nitrogen. Because of that she was on water only diet for last week including today. Getting 2l per day to remove the extras. She wil get regular food in a day or so. Also today the watts goes to 200.

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

Esta cosecha fue muy buena con excelentes resultados de flores muy compactas y demasiado resinosas , la genética en sí es muy resinosa con olor muy característico , con sabores terrosos muy marcados .

End of Week 6 Added CO2 with regulator and controller! Added the trellis net to spread out the canopy and get more even light to bud sites. The ladies have lost some momentum and they're drinking less because of the pest issue. Although they should be growing faster because of the CO2 supplementation I'm sure when the thrips are gone they will explode. I also performed some HST by removing fan leaves and softly pinching and bending some of the stems to open up the canopy whilst keeping the stress at a minimal. Pest Report: Still fighting the thrips... Every time I spray Bio-Insek and Xterminator (Agro-Organics) it deals with the problem for a few days until the eggs and larvae that the thrips left behind hatch and start munching on the plants again. The ladies are strong and healthy and get a slight wilt when I haven't sprayed IPM for a few days this tells me that its not a major issue but I need to get rid of them especially because I want to flip to flower soon. It seems that the problem is under control. Now I will apply it weekly to make sure those buggers are ELIMINATED.

brothers sisters. this journey was wonderful. From the first month I knew this was going to be a wonderful experience and I was right. with the flower was not lead time no problem. I would recommend this model to anyone who likes fragrant flowers. and especially giant flowers. thank you for watching. and many thanks belong mainly to the @originalsensibleseeds . 💚💚💚

Day 77 - She's doing her thing this week. Pushing out trichomes. Looking good though! 😎

CBD Fast Eddy Automatic is combining Cheese x Juanita la Lagrimosa x Ruderalis, Fast Eddy is a rapid growing, flavourful, and CBD-rich auto strain that goes from seed to harvest in 8-9 weeks, produce generous yields, and induce a clear, mellow, and most importantly, functional high. THC: 9% CBD: High Yield Indoor : 400 - 450 gr/m2 Yield Outdoor: 80 - 130 gr/plant Height Indoor: 60 - 100 cm Height Outdoor: 80 - 120 cm Flowering: 6 - 7 weeks Harvest month: 8-9 weeks after sprouting Genetic Background: Cheese x Juanita la Lagrimosa x Ruderalis Type: Sa 50% In 40% Ru 10% Effect: Clear, Painrelief Climate: Mild ----------------------------------------------------------------------- 2017-10-16. Week 8, 62 days from germination. She is 45 cm high and have big colas. She smells wonderfull, strong citrus smell and something like spices and cheeseballs snacks.

Top dressed at the start of week 10 of veg in preparation to start flower this week. Defoliated and lollipop the bottom and also switched using recharge at every watering to tribus bloom at 1/2 strength to add microbes. Dropped ph to 6.3. The pics and videos this week is from 3 days after flipping the light schedule.the tent took longer to arrive than expected, I honestly would’ve flipped at the end of week 8 if I had the means, hopefully the flower stretchy isn’t massive, the plant sits at 42 inches and the plant pot is 1 1/2 feet so I am running out of space in the tent quickly.

🌸🍭✨🍬🌈🍭✨🍬🌸🍭✨🍬🌈 Hi and welcome to a first @KanOrganics run! This time I’m running Fantasy Feast (6x regular seeds). Gonna veg them under 24hr light with a mix of LST and topping — might let one go wild for fun. Still prepping the tent, need to transplant all my tomatoe and paprika plants to free up some pots, gonna sow tomorrow (14.04.25) 🌸🍭✨🍬🌈🍭✨🍬🌸🍭✨🍬🌈 💭❗💭❗💭❗💭❗💭❗💭❗💭 ❗Events & thoughts worth noting❗ 💭❗💭❗💭❗💭❗💭❗💭❗💭 12.04.25 (GW1) Cleaning old coco coir & prepping pots. Might need to hydrate extra bricks. This is how I recycle my coco coir — fast, cheap, no BS. 🌿 Harvest plant ✂️ Chop roots small — they stay in for structure (organic perlite) 💦 Hot water rinse — remove salts & dust 🍶 Pre-soak with light feed: Micro 10ml Grow 0ml Bloom 0ml GreenBuzz 10ml Cal-Mag 60ml FPJ 10ml pH down (citric acid) ♻️ Media stays — Roots stay — Back in service. 14.04.25 (GW1) Sow 6x Fantasy Feast ✅ 16.04.25 (GW1) did final tent clean up and all set up now ✅📸📸📸 18.04 25 (GW1) All 6 germinated 🎉👌♥️📸 🙏@resi_max 26.04.25 (VW1) using the new Batch of FPJ/FFJ https://growdiaries.com/diaries/266849-grow-journal-by-yan402 00.04.25 (?W?) Transplant to...WIP, ✅ 04.05.25 (VW3) Topped all of them to the same size except #4 which probably won’t make it. #5 is showing classic small pot symptoms, all 6 are droopy so left them to dry a bit,I overwatered them apparently, I'll be repoting tomorrow in bigger pots probably 9l, *repoted in 11l pots✅ 30.04.25 (VW2) – Increased TriPartMicro & GreenBuzzBloom 10ml → 15ml 03.05.25 (VW2) – Increased TriPartMicro again 15ml → 20ml 13.05.25 VW4 Increased TriPartMicro to 30ml and GreenBuzzBloom to 20ml. 24.05.25 VW6 increased GreenBuzzBloom to 30ml 01.06.25 VW7 At least 4 are female 🎉🥂 by next week I'll be choosing 2 or 4 to finish off. 05.06.25 VW7 Did a cleanup 📸📸 10.06.25 VW8 kept #1-4, #5 and #6 are going to the balcony with a new diary📸📸 14.06.25 VW8 did a cleanup HST session 📸📸 (VW9) 21.06.25 VW9 Switched lighting to 12 hours. 28.06.25 VW10 Girls a stretching nicely and are eager to show their pistils. 29.06.25 VW11 increased GreenBuzzBloom 30→ 60ml 06.07.25 FW1 TriPart Micro: 50→ 30ml TriPart Bloom: 0 → 20ml Home-made FFJ/FPJ (Watermelon + Pumpkin): 10 → 30ml 12.07.25 FW1 GreenBuzzBloom 60 →40ml, TriPart Bloom: 20 → 40ml, fpj 30→60ml 💭❗💭❗💭❗💭❗💭❗💭❗💭 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 🌿 Day to day tasks & actions 🌿 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 11.07.25 FW1 – Fed 3l of #1 25% strength → 1.5l runoff 12.07.25 FW2 – Fed 3l of #1 → 1.5l runoff 13.07.25 FW2 – Fed 3l of #1 → 1.5l runoff 14.07.25 FW2 – Fed 3l of #1 → 1.5l runoff 15.07.25 FW2 – Fed 3l of #1 → 1.5l runoff 16.07.25 FW2 – Fed 3l of #1 → 1.5l runoff 17.07.25 FW2 – Fed 3l of #1 → 1.5l runoff 18.07.25 FW2 – Fed 3l of #1 → 1.5l runoff 19.07.25 FW2 – Fed 3l of #1 → 1.5l runoff (*runoff reused for tomato plants) 🌱💦🌱💦🌱💦🌱💦🌱💦🌱🌱💦🌱 🍶💧🍶💧🍶💧🍶💧🍶 💧 Nutrients in 30L #1 – Week 2 flower 🍶💧🍶💧🍶💧🍶💧🍶 💧 TriPart Micro: 10 → 15 → 20 → 30 → 40 → 50ml → 30ml (1.00ml/L) 🍶 TriPart Grow: 0ml (0.00ml/L) 💧 TriPart Bloom: 0 → 20 → 60ml (2.00ml/L) 🍶 GreenBuzz Bloom: 10 → 15 → 20 → 30 → 60→40ml (1.33ml/L) ← ✅ increased 💧 Cal-Mag: 60ml (2.00ml/L) 🍶 Home-made FFJ/FPJ (new batch): 10ml → 60ml (2.00ml/L) 💧 pH Down: Citric acid (buxXtrade) 📦 TOTAL: 30+0+60+40+60+60 = 250ml per 30L 🔬 8.33ml/L 🍶💧🍶💧🍶💧🍶💧🍶 ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ ✂️Tools & equipment✂️ ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ ✂️ 2× MarsHydro SP3000 ⚙️ MarsHydro 150mm ACF Ventilator ✂️ Trotec dehumidifier (big unit) ⚙️ Mini no-name dehumidifier ✂️ Kebab skewers (LST – stainless) ⚙️ Wire + roast skewers (LST assist) ✂️ Scissors (HST) ⚙️ Vacuum (for spills & cleanup) ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ 🌈🍒🍭🍬🌈🍒🍭🍬🌈🍒🍭🍬🌈🍒 🦄Fantasy Feast(@resi_max Seeds)🦄 🌈🍒🍭🍬🌈🍒🍭🍬🌈🍒🍭🍬🌈🍒 Species: Hybrid (Regular) Genetics: The mother is Unicorn Whip by Dirty Bird Genetics. The father is Charcuterie by Cannarado Genetics. Effect: Unknown WIP Flavor: Unknown WIP Flowering: Estimated 8–10 weeks Resistance: Unknown — Testing phase Notes: Expect weird phenos, candy terps, possible outliers

She’s flawless with no problems, can’t wait to see what week 4 brings for flower development! Week 5 I’ll be running koolbloom powder. 30 inches tall after being laid down and trained. Have to conserve room for height restrictions in my space. Starting to get a bit bigger and the structure of the bud sites are pretty solid.

Pics and video were taken a few days ago been busy as shit lately so the update is a little late. I'm gunna put the video up first on all of them then go back and upload the pics so if come back if the pics arent up yet.

Leider sind die letzten Wochen nicht sauber geführt worden auf dieser Seite da ich die Plattform aufgrund der ständigen Upload und Verbindungsprobleme etwas aus den Augen verloren habe. Allen Ladys geht es soweit ganz gut 2 Blühen schon fröhlich vor sich her und gehen vermutlich in die Endphase über während die andere langsam anfängt sich in die höhe zu Skretchen. Lampe: Mars Hydro FC evo 1500 / China LED mit angeblichen 700W ( Vermutlich eher um die 100-150 ) Abluft hinzugefügt da die Luftfeuchtigkeit die letzten Wochen extrem hoch wahren und die Ladys es nicht so gut vertragen haben. Gedüngt wurde das erste mal jetzt am 13.05.24 mit BioBizz Bloom / Grow / Top Max PPFD: Zwischen 950 und 1000 DLI: 60 Ich werde die fehlenden Wochen noch editieren Bilder etc. habe ich alles noch.

Its done! Even though I expected a higher yield, I'm happy with my first harvest. It could have gone worse. Got 61 grams of the biggest plant, it took eternities, but the yield is pretty decent for a first grow. Thanks WSE! Next up will be Strawberry kush and Harlequin.