Likes
Comments
Share
@w33dhawk
Follow
Moin moin an alle, als erstes möchte ich diese Woche djiny danken der hat mich auf die Idee gebracht mal mein Lemon kick von plagron über Nacht zu testen (1 Liter Wasser mit lemon kick von plagron fertig gemacht eingestellt auf Ph 6,0 und einen weiteren Liter mit Ph down von hesi) am nächsten Morgen habe ich den Ph Wert von beiden getestet und dabei is der Ph down von hesi stabil geblieben war nach 1w Std immer noch auf 6 und nach 24 Std ebenfalls auf 6, das lemon kick von plagron is mir nach 12 Std schon wieder auf fast Ph 7,0 geklettert und nach 24 Std war es bei 8,3 wow das ist mal instabil hab ich mir gedacht ich glaub djiny hat mein Problem gelöst also djiny danke dafür. Indoor Sehen die Pflanzen nicht so toll aus immerhin fallen die Blätter nicht mehr einfach so ab nach dem ich jetzt 2x mit hesi ph eingestelltem Wasser gegossen habe aber sie produzieren gut Zucker und riechen so heftig nach süßem Kaffe mit Ur typischer Gras Note. Zu den steckies die ich outdoor zu zweit in einem Topf halte ich persönlich finde das sie nicht schlecht rüber kommen wir haben in den letzten 3 Wochen hier im Norden so beschissenes Wetter mit Sturm und Regen ich glaub es waren 3 oder 4 Tage mal schönes sonniges Wetter ind den letzten 3 Wochen finde aber dafür das es nicht so schön draussen war und ich mich kaum um die Ladys kümmere (wenn das wetter schlecht ist nutze ich mein zweites hobby rocket Leauge auf xbox series zocken, is halt in den letzten 3 Wochen viel gezocke gewesen 😱😱😱😱😱😎😎😎😎ups.... Mann gönnt sich ja sonnst nix) euch noch nen erfolgreichen Grow und das ihr alle schlauer seid als ich und diesen Kinder-Garten Fehler nicht begeht oder ihn schneller findet als ich
Likes
5
Share
Que pasa familia, vamos con la quinta semana de floración de estas Papaya Zoap F1 de Sweetseeds. Vamos al lío, me quede con 3 por espacio, siempre pongo alguna semilla de más por si no abriese alguna por no perder ese hueco del indoor. También se trasplantaron a su maceta definitiva, en este caso de 7 litros. Y también superaron el shock por el trasplante se recuperaron 100%. El ph se controla en 6.2 , la temperatura la tenemos entre 20/22 grados y la humedad ronda el 50%. El fotoperiodo esta a 12/12 para floración. Las jodidas estiraron bastante, y es algo que no me gusta de todas las F1, que cultive hasta ahora. El olor que desprende es muy peculiar es muy dulce y empalagoso, a mi parecer, no pinta nada mal. Hasta aquí todo, Buenos humos 💨💨💨
Processing
Likes
29
Share
@Reaper
Follow
ph meter is broken. i use ghe liquid to read ph lol ph goes down every night. 650ppm is still too high for this strain, drinks a liter everyday i need a bluelab ph/ec meter 2 Februari: the buds start to appear on the hydro plant with thc everywhere lol
Likes
148
Share
@BioBuds
Follow
A week with lots of activity from my side, from the Gorilla's side, not so much. She stays behind and I can't find any other reason than genetics/seed quality. She is in exactly the same conditions as the other girls. I'm letting her do her thing. She will give some weed, well see how much. Maybe she is a late-bloomer. She does look lush and healthy so we do not understand but are learning. I put in the scrog net since her roommates need it and lowered the lights and started giving more flowering feed. The light is still awesome, the amount it puts out. This SP- 3000 rocks and, wallet permitting, we will go for a second one. @MarsHydroLED might be so happy with the amount of coverage we give them, they'll send us another one 😏 If you haven't seen it yet and you are in the market for new gear, check out the Black Friday super sale on www.mars-hydro.com!! We are gonna see what happens coming weeks with this strain. So far I am a bit disappointed and didn't expect this from this strain. We will never know if it was the age of the seeds or something else. What I do know is, it was the last time I use a third party seedbank, it is apparently too hard to keep fresh stock with too many strains. Until breeders put a production date o the packaging. Isn't it time someone said that? Cause lets keep it real, we are talking seeds that in any other case would have a cost of production of fractions of cents per seed. We pay what? 3 to 5 to maybe even 20 dollars a seed for an exceptional strain? Is it then too much too ask to put a friggin expiry date on the package? Or store them cooled? The breeder that does that and arranges a deal with third-parties that overstock can be sent back, packaging recycled, in exchange for fresh stock. Like any other fresh trade. For an industry making what, a billion worldwide, it is remarkable how many are still in the stoner with a garage / 80's trailer park, backwater funfair warranty, kinda customer service. Me: i grow organic weed for 30 years, these seeds were old Seed dealer: Yes but you failed to do a raindance on the rising moon, no refund. Me: but its for cannabis? Weed industry: Yes why we charged you double! Me: wow no germination after paying 20 bucks for seeds? Industry: They are all stoners, they won't notice.... Me: but this bong is made from toxic plastics? Headshop: yeas but it has this crumbling image of a leaf, 20 dollar! Can they get their shit together? For god's sake, I've seen crack dealers with better PR and customer care. Someone do sumtin, take us out of the car boot era please?
Likes
4
Share
Likes
5
Share
@RookGrow
Follow
They’re getting juicy, just feed some compost tea made from Dr Earth Tomatoes Veg and herb fertilizer and some Molasses. Just seen a Nat so I don’t think I’ll be doing the tea again, I want to prevent bugs as much as I can. I’ll be putting up a sticky trap to catch it I only seen 1 but 1 is enough for me
Likes
7
Share
Day 70. Gorgeous plant. Leaves are changing color exactly how the advertisement looks. Fastbuds is dope.
Likes
12
Share
- Streching is ended. - Just like last week, humidity has been a very big problem in Berlin due to multiple storms and heat waves this week as it spiked between 50-85 % outside whole week. - VPD fluctuated this week between 1,0 and 1.65 kPa , averaging at 1,29 kPa. Better than last week because of the crazy heat wave covering huge humidity. - Tent temperature fluctuated around 24 at night and 27-28 Celsius at day time, averaging at 25.2. A lot higher than last week even though I have increased the exhaust fan speed but that’s all my exhaust fan can handle. - Humidity fluctuated crazy between 50-85% this week, averaging at 59.8. Not much I can do other than trusting the non-stop ventilation in the tent. - This week, I kept giving increased Ph (6.8) of water first half of the week as the medium Ph is still cruising under 6. But then I switched to 6.5 on the 2nd half of the week. - Much more frosting can be observed on Chemical Bride. - White pistils are slowly turning orange on both plants and the flowers are gaining mass. - Both have a similar pleasent gummy smell. - I believe that Kings Kush is not as capable as Chemical Bride in terms of heat and humidity resistance. My observation is that Chemical Bride is a week ahead already. But let’s see!! - This week, I will add a dehumidifier to the setup.
Processing
Likes
3
Share
Likes
82
Share
Harvest day, you’d think I’d be excited and I was until last night. I’ve had to have my oldest Cat put down due to health reason 😿 I almost can’t be bothered to do this update, but here I am 🤦‍♂️🤷‍♂️ it’s only one more entry. I harvested this plant at day 58 of flower, it feels like she matured and finished quite fast, always a good trait. Her buds are rock solid to the touch and almost wet with trichomes, if that makes sense?! I took some pictures just prior to harvesting her. She’s now hanging on a peg hanger in my drying tent, cut into individual branches. She took barely any time all all to trim, she’s got a high bud to leaf ratio and everything I cut off will be dried, frozen and sifted to make Rosin. No waste at all. I aim to dry between 10-14 days, I generally keep the RH around 55% and the temp fluctuates around 18*C. She’s been an easy plant to grow and I’d recommend these genetics, In House have really outdone themselves with this one! I don’t usually do this, but I’m dedicating this grow to my late Cat Poochim. (I’ve added some pictures of him) I got him when he was a little kitten and I was just a teenager, 20 years later and I’ve had to say goodbye to a very old friend 🖤
Likes
103
Share
@Hou_Stone
Follow
Tarte Tatin 🍏 Genetics = Caramel Apple Gelato x King’s Tart Photo taken on day 68 / Flowering 35 ------------------------------------------------------------ 💧Watering On average I water each pot with: Day 64 : 1 Liter Day 67 : 1.5 Liter with Bio Enhancer I add Bioenhancer once every 14 days +/-. with 1 gram per liter I add very few nutrients to my water because I have already placed Bio Nutrients directly in my soil 😉 (BioGrow & BioBloom added on week 1 & 5) ------------------------------------------------------------ 🔥❄️Temperature of the week : Day : 21-24°C (Humidity : 55-70%) Night : 16-19°C ------------------------------------------------------------ 🚀Equipment of the week ⭐️ : Lamp Led 300W : power 95% at 35cm Extractor+ carbon filter ON 24/24h 2 fans ON 12/24h ------------------------------------------------------------ 📜Links : Tarte Tatin seeds 🌱: https://shop.greenhouseseeds.nl/feminised-cannabis-seeds/tarte-tatin/ Food for your plants 🔥🔥👍 https://www.greenhousefeeding.com/ 👨‍🚀My Instagram 🌱❤️️: https://www.instagram.com/hou_stone420/ ------------------------------------------------------------ ☮️Thanks for your visit💚☮️
Likes
8
Share
@TrueNorth
Follow
Okay growmies here we are at the end of our GELATO AUTO 🍧 by FAST BUDS. It was such a pleasure to grow, i learned so so so much this run that will help me through the rest of my adventures. The beginning was tough as i am new i over watered and did not ph the water and what i mistake. But its okay i learned. She bounced back like nothing and produced these HUGE, FROSTY, DENSE BUDS! I remember the panic i had week 2-3 and wanted to scrap all of this and start over.... thank the weed gods i didnt because look at this masterpiece. I always said she took for ever but hoped she becomes a beautiful queen. And here she is. She was SOOO HUNGRY AND THIRSTY! Over a all a pleasure and amazing grow. I will for sure grow again and again. She responded so well to LST and topping... slowed it down but it was so worth it guys lmao... GROWMIES! I LOVE LOVE LOVE YOU ALL SO SO MUCH! Thank you for all the continued support and likes and comments and help. Id be no where with this with out all of you. And thank you to the FAST BUDS team and to you heather! Grow diaries thank you for the plat form. I love you guys. All of you. All my sponsors. Thank you. Until Next time growmies! Stay positive, stay safe, stay
Likes
9
Share
IF YOU WATCH THE VIDEO YOU CAN SEE THAT I MOVED THE LAST AUTOFLOWERS INTO THIS 5X5 TENT, AND MOVED THE PHOTOPERIODS INTO THE 8X8 TENT. FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
29
Share
Cold most of the week. I ran lights 24hrs last few days so temps wouldn't dip below 60. Punch 3.0 may be showing a little stress from all of it. Looking good so far. Video is from Saturday - I normally use the vipar alone for veg, I added the UFO for heat for a couple of days. I expected it to be too much light for seedlings but they are taking it fine so far. I will see if I see a difference in growth from blue to red side.
Likes
8
Share
@Kirsten
Follow
26.12.24: I have noticed light stress on my plants. I had moved the lights further away and increased the light intensity to 70%. Unfortunately that created some issues. Namely severe palour of the leaves. To try and rectify the situation, I've dimmed the lights to about 30%, staying at the same distance, about 30 inches away. I measured the par levels, after I did this. They should a reading of anywhere between 40 and 150, at the canopy of the plants. They are all different sizes. This seems to have improved the colouring on all plants. After this evenings watering, I will monitor recovery and increase lighting intensity again slowly. I am also using the light cycle of 21/3, so the plants have many hours more light to absorb, than for example 12/12 or 18/6. I am pleased with the progress, considering all of my mistakes! 29.12.24: So I finally gave LST a shot, it's probably a bit too late, however I really want to get the most of the triploid pheno, and I went a little crazy and LST'd all plants except 2, as they're too small. I did that late last night, this afternoon I was amazed to see the plants turn their leaves back to the light source. I'm glad I overcame my fear of trying it. I'm very excited to see them adapt and progress! 😁 there are videos above with before and after of my LST process. Thanks for checking out my diary 🍃 ✌️
Likes
2
Share
@nefcxt
Follow
We're at 16 Tops already, probably won't go for 32 though but we'll see. I also used some more hardware store fertilizer which the plant liked a lot.
Likes
17
Share
@BLAZED
Follow
Week 12 (17-4 to 23-4) 17-4 Temperature: 23.1 degrees (lights on) 19,1 degrees (lights off) Humidity: 62% (highest) 50% (lowest) 18-4 Temperature: 22.5 degrees (lights on) 17.9 degrees (lights off) Humidity: 61% (highest) 52% (lowest) Opened the reservoir for a couple of minutes. 19-4 Temperature: 22.5 degrees (lights on) 18.4 degrees (lights off) Humidity: 64% (highest) 54% (lowest) No pictures. 20-4 Temperature: 24.1 degrees (lights on) 19.1 degrees (lights off) Humidity: 65% (highest) 54% (lowest) Light increased from 50% to 60% strength. I also made a new 10L feed, and added it to the reservoir, there was still 2850 ml in the reservoir, so i can calculate how much they get per watering. Opened the reservoir for a couple of minutes. 21-4 Temperature: 24.4 degrees (lights on) 19.3 degrees (lights off) Humidity: 66% (highest) 54% (lowest) No pictures. 22-4 Temperature: 23.7 degrees (lights on) 19.7 degrees (lights off) Humidity: 67% (highest) 42% (lowest) Opened the reservoir for a couple of minutes. 23-4 Temperature: 23.6 degrees (lights on) 17.7 degrees (lights off) Humidity: 64% (highest) 50% (lowest)
Likes
17
Share
@Farmboy99
Follow
Pls tell me if i can do anything to make it better 😎