Ok so today is day 9 and I have had a change of plans for the grow and have lost 4 of the 9 papaya cookie seedlings.Probably just a stroke of bad luck but I must move forward.I have 5 papaya cookies,1 gelato auto and 3 mystery photos from fast buds mix pack in the tent that will flourish after the autos finish.Just plain water every few days is the plan and recharge once every 10 days.SE7000 is raised to the ceiling of my 5x5 80 inch high tent set at 30 percent power.

Still trying to find the issue, I noticed that new growth mostly looked fine and the plants were growing quickly still after watering and leaf issues started popping up only after the soil had dried out quite a bit already. So was I underwatering? Was the EC in the soil rising after too much dryback? Still, the plants were quite light in color, but that did not seem like my biggest issue. I topped the GMO a few more times, because it had grown so tall. Finally I decided to put the Sour Strawberry seedling into the AutoPot as well.

Eccoci qui... Tutto va per il meglio, questa settimana ho eseguito Lollipopping e Defoliation per far si che le cime principali sprigionino al meglio il loro vigore. Siamo verso la fine del progetto ora bisogna solo aspettare la fine... Grazie a tutti per il supporto🔥🌲❤️

Started Training Late! Was on summer holiday for a week and only started training now. Above are the plants during training as well as a few hours after training. Autos are definitely more delicate and the two runts are growing slow but yet still showing some progress. Changed my bulbs back to the CMH set to 400w each (2) Also gave them a good amount of water as the FloraCaps aren’t covering the whole pot I felt like it was necessary to wet the entire grow medium well for a change. Some of them were a bit far along for training but I did the best I could. Also the Purple Lemonade and 2 other plants are showing signs of flowering.

Week 7 (10-3 to 16-3) 10-3 Temps: 17.5 to 21.8 degrees Humidity: 57% to 70% 11-3 Temps: 18 to 21.8 degrees Humidity: 61% to 65% Watering #2: 500 ml. 12-3 Temps: 17.5 to 21.7 degrees Humidity: 57% to 66% The individual ScrOG project is done! I attached the screen to the #1, the #2 will be done tomorrow! I had to do some Supercropping (HST) to the plant to make everything fit. Set the light to 40% strength with a distance of 60 cm. I didnt think about the poles of the tent, so its not fitting perfectly, but i will fix that tomorrow! 13-3 Temps: 17.6 to 21.2 degrees Humidity: 56% to 64% Watering: Both 1000 ml. Attached the screen to the #2 and did some supercropping aswell. The screens fit perfectly now, i am very happy with the end result!! 14-3 Temps: 17.2 to 21.1 degrees Humidity: 58% to 69% Watering: Both 330 ml. (Only Calcium added) 15-3 Temps: 17.2 to 21.5 degrees Humidity: 60% to 71% Watering: Both 1000 ml. Set the light from 40% to 45% strength. 16-3 Temps: 17.5 to 21.6 degrees Humidity: 64% to 70% Progress of 2 White Widow's in the same tent: https://growdiaries.com/diaries/254339-green-house-seed-co-white-widow-grow-journal-by-blazed

With all the additives my plants seem to be putting on height to match the one that is much taller than the rest buds are coming along nicely and getting bigger everyday, I’ve grown this strain a few times before in soil with varying results but it’s a nice smoke AN BASE B52 Bud Candy and Big Bud

Hi all!👊😊 Week 4 of veg he love LST I got 2 new lights Aelius led 300gh 😍

Think I fed too much water but not sure, it’s been a couple days and medium still feels wet. One of the gorilla cookies is looking terrible and the other looks like it’s kinda starting to show some deficiency that I think might be magnesium deficiency but not sure. Anyone got any suggestions to help?

Time to start Flush 😀

All theses photos are of going on end of week 6 of total life for these plants , it says we are getting close to the end of this paticular cultivars grow cycle but we will take it all the way till trichomes are milky ,amber to a ratio of my liking. They were stunted , I shouldn’t have transplanted them just started them off with a drip system in the autopot - pots ! But they are growing good. That is nearly trichome production on my number 3 girl. Will continue to post updates with better info. I’m rushing today, peace out

Empezamos 3ª semana de crecimiento, durante esta semana, podare los bajos y algún nudo. Tras unos días de recuperación pasaremos a floración. Se empezaron a germinar el día 10/10/23 llevamos 27 días desde que se empezó a germinar. Hoy día están siendo regadas con 1.5 de ec y 6.0 de ph, usando la gama de abonos orgánicos de boom nutrientes y CALMAG. Uso de sustrato el LIGHT MIX de GBNUTRIENTS. Son frondosas con grandes hojas, nudos muy corto entre si y además están verdes. Se nota que la luminaria hace su trabajo sin calentarse y por eso la tengo cerca de las plantas evitando que se "espiguen" **Actualización 08/11** he podado bajos de todas las plantas y alguna hoja grande que tapa las formaciones. En pasar 2-3 días para que se recuperen, pasamos a floración.

This week went great. They are drinking lots and still look happy and healthy. I didn't do any training just let them grow. Happy Growing y’all badasses

04/01/21 inicio de semana 07/01/21. se paso a fotoperiodo 12/12 para tratar de adelantar la floracion con 71 cm de altura. 09/01/21 se le hiso una leve defoliacion 10/0121. cieree de semana con75 cm de altura se le amarraron lunos de los brazos satelitales bajos

MY SAYING NOW IS: THE ONLY WAY TO GROW IS WITH THE HYDRO🤘 AND REACH FOR THE STARS WITH MARS🤘🤣. https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA So it's been 17 days under the new MARS HYDRO FC4800 and the TSW2000 and the girls are loving it.. leaves were straight up like they were at a rock concert just blowing in the wind waving their arms like they are in the moshpit🤣🤣 looked so sweet👍. after a day they have stretched so much I had to raise the light already to keep it at 14 inches above the canopy. Plants grow so uniform under these lights, canopy is always nice and even👍. it has a whiter light than the mars tsw2000. Being side by side in my 8x8 tent, I can really see the difference in the color of light. The FC4800 is more of a white light like natural light. Its the NEW blue uv Diodes they added to the fc series lights. I'm amazed at how good this light is already. Barely any heat comes off it. I can rest my hand on it when the dimmer is at 100% and it's just warm. I have it daisy chained to my TSW2000 and it works awesome👍 and I dont have to reach for the other dimmer to do both. One dimmer controls both lights. When I add more lights I will daisy chain them too and control 4 lights from 1 dimmer👍. I still love my tsw2000. It's been going almost non stop since I got it and no issues at all. I take a picture of the Diodes to see if any have burnt out or anything, everything is fine.  same thing with the heat it gives off is just like the FC4800. I can rest my hand on it without burning me👍. Having both lights on 100% because I'm in flower now, only raises my temperature about 3°celcius. Make sure you got some calmag and if you use reverse osmosis water (bottled water) or filtered water you will want extra calmag because it's filtered out of it👍. I CANT BELIEVE the amount of crystals the plants have already🤘 they just started getting bigger hair clumps and I didn't expect to see this much already👍 awesome lights do an awesome job. So it's looking good for these strains I made👍. These lights are perfect for every stage of growth for germination to flower. Just use the dimmers to reduce the intensity of the lights for whatever stage you are in. Plus they are easy to raise and lower them with the ratchet straps. MARS HYDRO'S recommended height for different stages is pretty accurate but different strains like different Temps and light sensitivity so that's something to look into, a more Mediterranean strain can take more heat and intense lighting. and you can just follow their recommendations for the height for each stage. I slowly turn it up in the later veg cycle until I'm at 75% about a week before I switch to 12/12 and after about 4 or 5 days into flower I'm at 100% with no heat or light stress👍. Mars hydro is awesome for their pricing for what you get👍. They should cost alot more than other brands but shhhhh don't tell them🤣🤣🤣🤣. Just kidding. they want to stay competitive with every brand but there stuff is always cheaper than SF and vipar etc. They know once you use mars hydro products you won't switch to another brand. Why pay more money for something that isn't as good. I've seen lights cheaper than mars but they are cheaper for a reason. They are built cheaper. My TSW2000 is fairly heavy too. But when it comes to getting lights you want some weight to it so you know it's built strong and sturdy and will last a long time.. I called customer service a few times and they will help you out with any questions you may have about the products and they are very well educated in their products👍 very helpful and very friendly. They are awesome 🤜🤛. I can't say enough about this grow tent too. The thing is a beast. I could use the canvas tent to make a trampoline and i doubt it would break its that thick👍 I've had some cheaper tents made of 600d canvas and they aren't that bad. But when you get a tent made from 1680D canvas material it's insane how strong and heavy it is. Before I put the tent together when I lifted the canvas to start wrapping the frame I said to myself.. LORD TUNDERIN JESUS this has some nice weight to it. It was the easiest tent to put together that I've ever had. I went inside with the lights off and got someone to turn it on after a minute or two to look for light leaks and there was none👍. It even blocks out some noise, so if your fans or filters are loud, once it is zipped up it gets quieter. this tent is awesome with So many ports and vents for whatever you need to hook up to it. It has frame bars down the middle and one vertical pole in the middle to keep it sturdy but the poles are made nice and so thick that they probably didn't even need a vertical bar in the middle. It has 2 separate 4x8 floor trays that divide it into 2 4x8 tents. All you need is a mylar divider to easily divide it in half. I love the stickers it comes with. It's nothing big to some people but I know there is lots of people that like them because you see them everywhere in people's tents and in pictures. I love them they are super cool stickers👍. It really locks in the light and temperature and humidity good. Lots of room for all the equipment I have to go in it and will get to put in it. Be good to bring camping too🤣🤣🤣🤜🤛. Thanks for stopping by and taking the time to read this and please leave a comment 🙏🤜🤛 if you have any questions about any of the products I use please feel free to ask me and I can help you out👍🤜🤛 I also know about all their other products too, so any questions about stuff I'm not using I can still help you guys out🤘 and ask about pricing if you're interested in anything and I'll see what kind of deals I can hook you up with. But don't just buy stuff.. let me know so I can talk to my friends at mars hydro and probably get you a better deal👍🤜🤛 https://www.mars-hydro.com Promo code: Rocknroll Instagram: @marshydropenny Here's some more information about these products I'm using: The goal of MarsHydro is simply to produce the best value grow tents in the  growing field and they didn't disappoint me at all. I'm beyond satisfied with everything. And with the most up to date hydroponic equipment at the lowest prices possible. Their grow tents have combined all their engineers and customers' advice to produce these unbelievable tents.. they really listen to us and change things to our liking so if you own anything from mars just contact them and let them know.. they take our advice and considerations VERY SERIOUSLY so don't hesitate to let them know 💪🤜🤛 The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍 https://www.mars-hydro.com/ Promo code: rocknroll Instagram: @marshydropenny GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! https://www.mars-hydro.com         PROMO CODE: rocknroll Instagram: @marshydropenny Happy growing to all my friends 🤜🤛

Week 4 the girls are really growing and stretching i gave them a defolation and light misting started Lst to all my plants. These plants are showing a lot of new bud sites

Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Have fun with the update. Flowering day 26 since time change to 12/12. Hey everyone 😃. Another great week goes by. Last week, instead of 2 g of GHSC Powder Feeding, I only gave 1.5 g p l of substrate so that I can give you another 1 g per l of substrate next week so that it lasts until the end :-). It is developing very well and the buds are starting to grow :-). The week was poured 3 times with 1.1 l each time. once of them GHSC Enhancer was added :-). The bottom shoots have now also been removed :-). As always, the humidifier was refilled every day and the lady was checked for her health. I hope you enjoy the update. Stay healthy and let it grow 😊🍀. You can buy this Strain at https://www.barneysfarm.com/blue-cheese-34 Type: Blue Cheese ☝️🏼 Genetics: Blueberry X Original Cheese 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8

I switched to a flowing light cycle mid week and they all took it on pretty well. The first lingering smell is developing while they strech and gained almost 5cm in only 3 days. I removed a couple of large fan leaves, mostly the bottom ones and a pair of top leaves to give light a chance to penetrate further don the canop

This week i've started flushing my plant, i think i'll harvest in 2 week, some leaves show burning, nothong very spécial this week, Bud start to be dense