The Grow Awards 2026 🏆
Likes
Comments
Share
I thought i was going too hard so I brought PPM down to 246 diluted with some rain water PH to 5.8. Leaves were coming out weird not sure if it was from the fimming i did or idk...But i did go ahead and topped her on all sites that i could top and gave her a haircut to expose those sites that were lacking exposure to light from the fan leaves blocking direct contact from the lights. Tied her down to maximize all angles of light exposure. She is pretty tough from all the shit i been putting her through to not fuck up this DWC
Likes
17
Share
@Lazuli
Follow
The smell is insane. Purple colors.. sooo much resin The quality is very high on this beautifull plant
Likes
11
Share
Lowered bloom nutrient to 16 mL per gallon and hydroplex to 4 mL per gallon. EC now 2.3
Likes
36
Share
nice week this week. very noticeable transformation. I have a yetti purple berry kush in there which smells just amazing. this week i tried, for the first time, some under canopy LED. 2nd day with it today as i write this. they really took it well. perked up and kept at it. the color and hue is starting to come through. Super happy with this tent. I think its worth the effort to create an organised space to give yourself the best chance possible. you will see the difference in approach form Auto tent and then photperiod tent.
Likes
13
Share
Looks like almost all white hairs are gone. Should be close to finishing, I hope anyways. Trimmed her up this past week a little bit. Plant is 99 days old.
Likes
27
Share
@WestOzzie
Follow
first time grower,random seed in a bag of local bush weed,it seems to be doing ok,signs of little hairs growing on nodes so im gathering its starting to flowet started off with 5% nitrogen for 2 weeks at 1.5ltr per day then went up to 10% nitrogen on same water cycle for 4 weeks now using 9% nitrogen but have upped the P and the K for flowering stage soil is sandy underneath so drains very well,typical western australia sandy soil https://youtu.be/4bxFg8IivZo
Likes
7
Share
The start of week 6 and I welcomed some buds Roth sigh…i really want get to start ripening so i will sacrifice a few more buds if that's what it takes.
Processing
Likes
2
Share
@Justrite
Follow
Added temp and fan controllers to keep the new ones happy as they were being neglected a bit .
Likes
8
Share
Likes
2
Share
Coloqué las semillas en un vaso con agua de osmosis durante 2 días. Al segundo día empezaron a reventar y se les empezó a formar la raíz.
Likes
7
Share
30.12.2026 – BT58 Bei allen drei Pflanzen wurde – mit Ausnahme der Apples & Oranges – nur noch pH-korrigiertes Wasser mit Cal/Mag gegeben. Die Apples & Oranges erhielt die letzten drei Gießgänge ausschließlich Wasser und wurde nun etwa eine Woche lang nicht mehr gegossen, bis zur Ernte. Des Weiteren war dies der letzte Gießgang in der Blütewoche mit Cal/Mag. Für die restlichen zwei Pflanzen gibt es nun ebenfalls nur noch Wasser, um im Drain einen EC-Wert von 1,0 zu erreichen.
Likes
15
Share
I’m seeing some issues in some plants. Not stacking and look nutrient burned?
Processing
Likes
22
Share
5/11 - 5/17: I have her in full LST submission..sprawling nicely.👌 I watered her once really well at the start of the week with endoboost, humic acid, silica, cal-mag, molasses, and big bloom...and a little bit of grow big. I foliar fed with boom boom spray one day, and a solution of fulvic acid, cal-mag, big bloom, sweet & sticky, and silica a few days. It rained really heavy on the night of the 15th, so I won't be watering again anytime soon. All her topped shoots are growing out now. I'll have enough soil for a few plants in 3 gallon pots, and from what everybody says, I'd be very happy with some more jars of #7. I spent all 3 seeds to grow this one plant, so I'll try rooting some clones of her soon...👈 This week I received my new portable outdoor misting fan and hoses and got it set up on a timer with just airflow while the lights are on, and once the temps reach about 95f regularly, I'll have my hose timer let 10 minutes of water every 2 hours get misted across the canopy. It should lower the "real feel" by about 25-30 degrees and increase RH considerably. Also hoping that the constant airflow will make them stronger and keep insects off of them somewhat. It will also enable me to easily give them a blow dry if it rains in late flower. But wait...that's not all....it's also gonna be very much more enjoyable for me to sit in the garden and do my thang. 👍 I found a waterproof 200w 3000k light that has two panels that can be independently aimed in different directions. It covers a 3' x 4' area very well. It gets hot as hell, but..it's outdoors, so.... All total, that's 470w watts in 24 sq ft that i'm supplementing with. I've got very vigorous growth, so it seems to be doing the trick,
Processing
Likes
37
Share
@MG2009
Follow
Sorry forgot about #3 pic. #3 added today.Mid week video is not so good I will do better next week lol 04/24/2018 Pulled fan leaves down to let growth tip to get more sunshine hope the weather cooperates gotta get clone from each one and keep for testing further down the road.
Processing
Likes
5
Share
She looks very healthy and strong, maybe a little bit small for 22 days old but it's okey,she's a happy wonderful lady,let's hope she can get a big enough size with the preflower stretching.
Likes
Comments
Share
@c1note
Follow
26.11 2L mit 2.2 Ec +Hesi Supervit. VPD 1.1. DLI 38-41. Perfekte Woche und sie belohnt es auch. 23.11 phänomenaler Wachstum. Trichome auf den Leafs und die Buds sind erst aufgetaucht. Ec hoch auf 2.2. TNC MycorrHydro auf die Oberfläche verteilt. 20.11 Woche 3 Blüte. 2L mit 2Ec. VPD 1.2. DLi 38- 40.
Likes
3
Share
@Promi
Follow
I feed and raise light.. nothing more. Still a zero effort grow.
Likes
27
Share
The plant of course is much more smaller with the restricted root zone causing a bonsai effect. However, she performed really well under the circumstances with a relatively large yield all things considered. I usually smoke high CBD but was very impressed with this high. Let's see how it goes after spending more time under the influence. Review... Growing in the solo cup sized container proved to be much more challenging than a regular grow. The plant soon became stressed dealing with the tiny root zone making everything hyper sensitive. The first issue was showing as tip burn even though the ppm was kept in the 650-850 range. Then the leaves showed a general yellowing overall specially showing at the bottom fan leaves. At this point I was changing the nutrient solution every 2-3 days trying different nutrient brands and concentrations seemingly without much success. It was a nerve wracking period which ultimately lead me back to General Hydroponics with amendments. I did learn that the plant can weather the storm even with less than perfect vegetative leaves while she focuses all her energies into calyx production. It’s was upsetting to see less than stellar health but eventually all the leaves drop and the flowers power on seemingly without issue. The cascading diamond structure developed as a result of a couple broken branches that occurred during the training process in an effort broaden the plant profile with wider lateral spacing. Although initially upset when the fractured branches that withered after being bandaged up and . After removal of said branches it was exciting to see the new possibilities. The cascade formation called for additional side lighting to maintain uniform bud size all the way down the front lower end of the plant. I was looking to create a stadium like effect. The experience of operating the visual hydroponic unit called for a number of practical adjustments along the way. Although initially, very excited with the system concept as an integrated design with nutrient solution supply and gravity drain through the pump, with the air supply inside the pipe with the air bubbler acting as the drain/root filter... in hindsight, obviously, it would not work as the root mass became denser and denser. The first issue, as the path of least resistance, the air was forced back down the nutrient supply pipe. This prevented the pump from priming itself and subsequently no nutrient solution delivery was even possible. As a result, the original air stone was left in place to prevent the roots from entering the nutrient tank and a new bubbler stone simply added to the tank itself. Although the original idea was for the air to be continuously pumping directly through the roots, the flood and drain would actually be just as good when drawing the fresh air in and out with each pump/drain of nutrient solution. The ON cycle was initially set to 10 seconds which eventually became 30 seconds as the roots mass grew denser. This proved to be too unreliable as the fill level was no longer consistent which required constant monitoring to be sure that there was no flooding over and above the container lid. It which case, a simple feeder tube to the top of the root zone was the best option. The ON cycle was set to 5 seconds with a 15 minute OFF interval. Overall the biggest concern was the timer itself, which had several bad reviews for malfunctions with growers losing their plants. However, I have no choice as this was one of the few timers that was capable of cycling down to the second but it all workout fine in that regard… no problem. Was it a perfect grow?... no, definitely not. However, as a relative beginner, it was definitely a great learning experience. Mostly, I need to work on the nutrient blend and concentration. For more control, a backup tank with float valve delivery to maintain the water level for this particular system would be a good idea as well.
Likes
20
Share