Likes
Comments
Share
These girls are packing on weight and very very quickly, front 2 are watermelon punch , back 3 are blue gelato those buds are like boulders so dense and heavy you can see the weight of the buds when the plants are blowing , inhouse genetics terples are huge and taller , wedding cake is so frosty
Likes
45
Share
May, 15th 2021 Some of the Hyper Glue Plants, wich were in the smaller continers, were transplanted into 3l They needed it, because some were yellowing, Roots were well developed, now they can go on for a few more Weeks . Keep Watering them with Beneficals, and Spraying one Time daily with "Fast Plants Spray" Thosse foliar Feeding drives them very well
Likes
Comments
Share
Processing
Likes
21
Share
The plants were so crowded I decided to put them into a Larger tent to allow some light to the lower bud sites and to help lower the humidity amongst the plants. I'm sure they will love the extra space. The light has now been raised 20cm (20cm taller tent) Allowing me to turn out right up which is 45000 lux in the centre right below it. I will up the bloom to 2ml/l this coming week.
Likes
7
Share
@Lucyfer
Follow
Whats up? sorry for no post last week, I had dengue. feeling much better now but plants sure suffered a bit trought the week, ran out from nutrients and did not have the strength to care for them. Gladly, I had some assistance with my own health issues, so the little energy i had i spent on training the girls and watering them, as you can see there was a deficiency that led to some bleaching and discoloration of new growth and old, water levels started to change and it stabilized in 145 PPM and 6.1 pH. I was worried about not giving them anything to eat, but when i spoke to Howweedgrow about it, he recommended me to only water them without nutes, although i think he did not read my message properly as he answered with a "its better to water them than not at all", when my original question was in regards of making some food without FloraMicro (the ONE nutrient i ran out of), luckily i was able to get some and in 5 days time it arrived. Firls looked like this for the week Lvls in bucket where as follows: EC 283 uS/cm TDS: 141 ppm pH 6.02 Temps 23.3 C 73.9 F
Likes
117
Share
OMG OMG OMG my caligirl and really very prosperous ... These girls are about a meter and one of them has just passed the central bar coming to measure almost at one meter in height. I hope to travel the right road until the end
Likes
90
Share
Runtz T: 8 weeks of flowering . Indica trend at 75%. Stretch small x2 max. Terpenes: Chem Zkittlez gas fruity candy. Large production of high quality resin. Thc 24-29% Lemon T x Runtz original cut . https://linktr.ee/merrynipple https://www.instagram.com/merry.nipple/ https://www.thehighchameleon.com/ https://demetearthsystem.com/ https://budtrainer.com/ -10% on your order with my promotion code : Merry
Processing
Likes
10
Share
Start of week 3 I believe the girls are doing good a few minor worries but that’s at ease for now I think , i have added nutes at a low level and will increase once I see how the plants react to the introduction of the nutes .. Looking into starting lsd on some plants but not too sure wether it’s to early or so . will continue to update the week but for now Started lst on a few plants day 15 and seen good reactions by day 17 so quite happy with that and will continue this process I will also look into topping my plants as well but not just yet ... they seemed to like the nutes as well so all good week so far Soo topping done on 4 plants wasn’t as scary as it sounded haha let’s see how they recover ! Going to combine lst as well now Very good recovery it looks like and the end of week 3 looks promising with the plants happy growing
Likes
7
Share
Pretty decently easy grow, no complaints! Stoked to pull 6oz in a 10 week grow -- autos ROCK! This smells great! The buds were MASSIVE, I was a little skeptical of jarring them that big and decided cut them into smaller nugs just to be careful with mold issues. Will update and finish this review in a few weeks once they've cured!
Likes
Comments
Share
@Pablo_420
Follow
Aquí fue el corte de la gelatto al final la planta más pequeña de todas pero bastante bien para lo que es un foco de Amazon, las demás se dejarán una semana más y se cortarán todas
Likes
44
Share
@Theia
Follow
No stress in her final week. She had just water this week which stopped 3 days ago as I knew I was chopping her. D69 of bloom and I'm very happy. Flowers are super dense. Like rocks..👍🏼😋. See you in days for a little update on how they have dried.🇬🇧👍🏼
Processing
Likes
10
Share
Plants are very healthy They didn’t drink as much as I expected this week Trying to build doors for this closet
Likes
4
Share
Second week of flower and I defoliated again. There are small bud sites starting to form at the end of week two flower. The apple fritter has fascination which is making the stems grow interestingly with lots of bud sites.
Likes
7
Share
Co2 order never came in but better late then never I grabbed a bottle of tnb from my local grow shop and let it goto work. This week went great The purple buds are very rewarding 😁 Excited to see what next the week has for my babies
Likes
14
Share
FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA (NEW) STRIVE NUTRIENTS 💪 Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍
Likes
34
Share
I was told this is a 1:1 CBD strain but feels more like a 2:1 Ok so this plant yelded large , thick and dense flowers that are completely covered in sugar , The flavour and smell is fantastic even without a cure , I've been using this in the vapourisor and the flavour is incredible , A very thick and heavy gas that does not make you cough at all , and for me it's a very heavy head high and then you get a very pleasant feeling in your lungs and chest , The effect is very relaxing and claiming , For me it's all you expect from cannabis without the head f*CK It's a really nice smoke indeed , Too the point that I think I will not be turning this plant into oils as in the decarbing temperature you need too choice ether the CBD or the thc at they both decarb at different temperatures CBD needing alot higher temp too activate than thc does , so you ether burn off the thc too get the CBD , so I think this will be my night time chillax smoke as it's real nice ,
Processing
Likes
37
Share
Day 49 - 14th Day of Flower I'm starting to really enjoy this part of the grow. That said the amount they have stretched is crazy! My lights are maxed out height wise and they are only just 18" above the tallest colas so I really hope they finish up stretching soon. Nutes: I added PK13/14 for fridays feed and they seem to have responded really well to it. They have been fed every other day as they aren't quite drying up in 24 hours. One thing I have noticed this week is the smell! They have become incredibly pungent. Everytime i go in the tent I have to change my clothes as they just smell so much. The fan leaves around the bud sites are becoming sticky! I have taken the smallest one out to photograph this week. It was sick when i got it as cutting so wasn't topped as early as the others. That said it seems to have grown into a really nice shape and has lots of buds developing. No problems really this week. Just a bit of mild light burn which I kept on top of. They will have 1 more defoliation this week and then I'll leave them be.
Likes
2
Share
@Kirsten
Follow
Bubble Kush is growing vigorously still, at present the largest plant, approximately 2ft in diameter. Watering with full strength nutes when dry. Ps. I'm not going into any detail, as grow diaries keeps cutting off these comments. Thanks for checking out my diary 🍃 ✌️
Likes
5
Share
We have liftoff! NOTE- the strain I’m growing isn’t listed yet, but it is in fact “Ice Cream Cake” Photo from SNS
Likes
21
Share
Hello, now the second week has begun.. the little helpers are slowly coming out of their holes and the first roots are already taking out of the small 1 liter pot and already two root ends have dried up again, which is not so desirable with AF genetics. every cell and every day counts to achieve good results in the end... This week there is another drop of alpha boost and that's it for additives. The soil is saturated with nutrients that are released now and then, it should fully supply this little AF throughout its cycle. vll at the end a dollop of molasses. Time will tell. let's give her another week, then there's something to look at... temp fits again at night it is also OK around 12- 15°... today and tomorrow even up to 30° during the day... So it can only get better. Although she put everything away with engraving.. great genetics that don't buckle right away if one or two days the conditions don't fit... It's growing! PS i add a little bit off Humus to the top layer..the helper seeds stretch a bit to much
Likes
5
Share
[ Information ] For all grow information, including strain and room details, please see the first week of veg. [ Updates ] (Flower) Day 1 - Light intensity increased to 65%. C02 increased to 1300ppm average. Day temp/humidity 85/70 (1-1.2VPD), night temp/humidity 75/65 (.8-1VPD). Fed a diluted compost tea mixture before lights on. Base water was R/O and tap water mixed lightly with silica and Tribus microbes. Tea was a mixture of Fish Hydrolysate, Bat Guano, Molasses, Fulvic/Humic, Kelp, and Earthworm Castings. 8 gallons of tea were added to 72 gallons of water mixture for an 80gal batch total. The batch was mixed for a half hour before feeding to the room. I did not PH or PPM test the mixture, organic material is hard to get an accurate PPM reading so the numbers are useless to me. I will be working to bring the lights to 100% power over this first week of flower. Day 4 - Light intensity increased daily, currently at 90%. Will raise to full power tomorrow. C02 increased to 1800ppm average. Temp and humidity for day and night are still the same. Lights were raised slightly to maintain 12 inches from canopy height, and a few growth nodes that were above the canopy got topped. Watered today with an 80gal (1.25gal p/pot) mixture, 10% tap 90% r/o water. 6.8 PH, 2.2ec. Foliar sprayed yesterday before lights off with a neem mixture for weekly IPM. Canopies are stretching relatively evenly, though I will be adding in support nets within a few days to help maintain the even spread. I've run this strain before so I'm fairly confident that I know what to expect during these few stretch weeks. Day 7 - Lights have been at 100% since day 5. C02 still 1800-2000ppm on average. Plants are stretching quickly into the lights, I have yet to readjust their height. The best growth usually happens when I do nothing, and I've done almost nothing the past couple days besides enjoy the unusually warm spring weather my area is currently experiencing. Watered today, 100gal (1.5gal p/pot) mixture, <1ec. Mainly an organic feeding for microbe health, also wanted a bit more runoff than normal due to the high ec feeding previously.