Likes
Comments
Share
@Dunk_Junk
Follow
For me this grow was a complete failure. The amount of buds I threw away was amazing.😭 The buds are very airy, not dense at all. Looking at the trichome sites they are spread quite far apart. Not much THC on this plant at all. If nothing else I've learned to use 24H light on only trusted genetics. I will give this away (if they even want it 😂) to a few mates.
Likes
39
Share
@SamDo
Follow
Hello, 1ère semaine, on démarre en douceur, les plantes ont 1 jour, une graine de critical+ 2.0 n’a pas germé, mais cela arrive, je l’ai remplacée aujourd’hui. J’ai mit vidéos du set up de la box et une qui reprend rapidement les conditions de cultures. C’est mon 1er journal, j’attend vos conseils et vos suggestions bienveillantes.. je ferais un update en fin de semaine... Update fin de semaine fait. Toutes les graines sont cette fois bien sorties!!👍Il y a donc un léger décalage entre elles, mais aucuns soucis. happy grow!!😎
Likes
35
Share
@Zengrower
Follow
I'm still feeling like a lazy grower with the Minigrow One doing all the LST 😅. The growlights make sure the plant stays naturally short and bushy. There's not much work to do but make sure she's hydrated. I may have to defoliate one of these days but that's about it. No buds showing just yet, let's see if they develop in the coming days!
Processing
Likes
51
Share
12/8: Fed today. 12/10: Very busy with life..seeing more pistils... finally... Sprayed them with Microlife Maximum blooms right before dark. 12/12: Fed today. Pulled everybody out of the closet and took some photos. Did some supercropping and raised the lights... 12/15: Had to raise the lights again...only 3 inches left, then I'm limited to supercropping for height control...
Likes
2
Share
Here I am again, stoners, haha. I'm really liking this genetics, they're growing fast and look at all the pistils it's throwing out. I foresee a delicious harvest, haha. Kisses and hugs.💀😍
Likes
9
Share
@GrowerGaz
Follow
Striped feeding completely day 60 , stacking hard in the dwc and I'm excited to see the yield. Smell is lemon sweets , cough sweets lots of hazey aroma. Mars ts1000 is so big a great job and I think will hit over a gram a watt.
Likes
5
Share
@BlattBoo
Follow
Zeit zum ernten! Die Pflanzen stehen jetzt noch 24h im dunklen und werden dann als ganzes aufgehangen.
Likes
29
Share
@Smokwiri
Follow
Welcome to week 8 of my Zamnesia seeds - Wedding cake diary Plant looks great, buds are fattening up a bit now, steep development. Running towards finish.... 10% discount on Zamnesia seeds with code GROWITGD
Likes
13
Share
Day 9-16/04/22 all looking good will begin to give them some root juice tomorrow!!! And the 2 seeds that I germinated to replace the 2 that didn’t come out are in the now Aswell. - Day 12-19/04/22 all looking good have them root juice and everything is looking good. - Day 13-20/04/22 ITs 420 somewhere!!!!!! Everything looking good gave them some more root juice today!!!!
Likes
3
Share
Processing
Likes
14
Share
Day 14 of flower and all 4 plants have stretched over a foot in the last week. Should start putting all of their energy into flowering now. Looking really good so far. Really, really good.
Likes
1
Share
Likes
40
Share
Day 16 Veg : Holy molly these girls have impressed me this week. I started with barely seedlings and now at the beginning of week 3 above the soil , they are going for it. Seeing the LOS girl#1 slowly start to gain a little more green to her leaf finally has me thinking the soil is becoming active now. The coty leaves are still all looking ok and not even nibbled by them. I wonder if autos can bypass them when resources are there for them ?. So far the coco girls have been consistently getting bigger but the LOS seems to have spurted up in their pots. They all had a treat of a life-cycle feed a few days back which seems to have accelerated them all a little too. No doubt their ruderalis genetic also is a huge help but no signs of deficiency besides the paling , so all good in the world. I am curious to see when the first signs of flower kick in now the 2 week mark has passed. Training starts soon.
Likes
6
Share
Processing
Likes
69
Share
@Bub1972
Follow
Just starting the 3rd week, I’m at 1/2 strength on the nutrients, will be changing water and nutrients every Saturday. Looking good. Roots coming thru. So far so good coming into second weekend of clean water and more food on Saturday. Really starting to get full. 8/18 Fresh water and nutrients today and both topped. Finishing out the 3rd week all topped and ready to bush out.
Likes
12
Share
Extrem starker Stretch, viele einzelne Äste die sich stärker nach oben kämpfen als andere.
Likes
9
Share
COMING SOON!! The tent and everything is all clean and sanitized 👍. Had some issues but now im Almost ready FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
16
Share
Ich werde am nächsten Tag anfangen zu entlauben und bereite sie auf die Blüte vor.
Likes
2
Share
@Sphereex
Follow
Exited for harvest 1 more week i think 😁