Chat
RecommendedRecommended

MyFirstGrowExperience(SOG)

1
26
17
695
3 years ago
Follow
1
Grow Conditions
Week 1
Vegetation
15
cm
inch
Height
18 hrs
Light Schedule
10+ conditions after
Login
Nutrients
ml/l
ml/gal
tsp/gal
Grow Technique Usage
SoG
Technique
Commented by
Ammazzaporri Ammazzaporri
3 years ago
We found all the gears for growing when the seeds were already coming out. Basically we started with a little Germination Box and the 18/02 we added a recovery light: 400w hps becouse our Marshydro ts 3000 led was in delay 😡. After a week, we started with the our amazing LED, The same day of the Pot Swapping. We had a lot of problem especially from the temperature at the beginning, but we adjusted them around the ending of the second week of vegetative.. As we already said this is our first attempt to grow so don't judge us but look at how we recovered them after a lot of errors.
Similar Diaries
MASTER OFF SCROG AT WORK
8 weeks
MASTER OFF SCROG AT WORKLimpBizkit
OutLaw
an hour ago · 1 comment
FuckYouLikeAnAnimal
1 weeks
FuckYouLikeAnAnimalCameltoe
Exotic Animal
3 days ago · 5 comments
Blueberry Zkittlez Automatic Sensi Seeds Indoor 2024
2 weeks
Blueberry Zkittlez Automatic Sensi Seeds Indoor 2024Cauli
Blueberry Zkittlez Automatic
3 days ago · 2 comments
Original Oreoz
1 weeks
Original OreozJ_Kush
Original Oreoz
3 days ago
Blueberry n blue cheese
2 weeks
Blueberry n blue cheeseWeeby
2 strains
3 days ago · 1 comment
Ethos Genetics !
1 weeks
Ethos Genetics !connormcleod47
+3 strains
3 days ago · 1 comment
Grow Questions
Ammazzaporri
Ammazzaporristarted grow question 3 years ago
Yo growers!👻I have couple of questions: 1- what do u think about the pictures of last week? (how we can fix our little problems?) 2- we ask suggestions for the distance of the lamp LED MarsHydro TS3000 (last weeks) 3- we should do an other defoliation? 4- what about flush? 🙏�👽
Open
Other. General questions
like
Answer
m0use
m0useanswered grow question 3 years ago
1- what do u think about the pictures of last week? (how we can fix our little problems?) The newer top mutated growth looks to me like overwatering. You'll also want to monitor the EC of the solution your feeding with. Looks to have some nitrogen toxicity and some potassium deficiency this could all be from a lockout in the medium. knowing your EC will help with this. growdiaries.com/journal/what-is-electric-conductivity-ec-and-total-dissolved-solids-tds 2- we ask suggestions for the distance of the lamp LED MarsHydro TS3000 (last weeks) Look at the manufactures web page. 12" at different dim settings seems to be the go to, could always try 100% at 15-18" if you plants are showing signs of stress. https://www.mars-hydro.com/ts-3000-led-grow-light 3- we should do an other defoliation? no use some LST growdiaries.com/journal/is-it-safe-to-defoliate-cannabis growdiaries.com/journal/how-to-do-low-stress-training-lst-on-cannabis-plants 4- what about flush? 🙏�👽 not unless its needed. Your plants are not near their end of life yet. Still look like they have some time to go. No brown pistils. only other reason to flush is an incorrect ratio or concentration of nutrients was provided and you need to wash it away before it causes bigger issues. Good Luck!
like
Complain
Comments
Login

Show by Week
Sort by
popularity
popularity
newest
oldest
GreenGlowes
GreenGlowesweek 1
Happy 420! 😎
Ammazzaporri
Ammazzaporri
@@GreenGlowes, Happy 420 too broooo😎😎
cannapassion
cannapassionweek 1
The best for the futur 🤛💪🌱
Ammazzaporri
Ammazzaporri
@@cannapassion, thanks brooo 🙏🙏🙏🙏
Maryjane23
Maryjane23week 9
Very good job!!!! Penso avrai un bel raccolto!!!😎 good luck!!
Maryjane23
Maryjane23
@Ammazzaporri, ti ho scritto il privato perché è un discorso un po’ lungo!!!
Ammazzaporri
Ammazzaporri
@Maryjane23, Putroppo le tempistiche della fase vegetativa sono state ridotte, proprio per necessità ( dovevamo fare l'intero ciclo in 3 mesi) e abbiamo preferito adottare un "sea of green" con femminizzate al posto che optare per autofiorenti!!! Ci piacerebbe tanto che facessero 30g secchi per pianta ma noi continuiamo a tenerci come stima sui dieci per non rimanerci male ahahahha Posso chiederti consigli sul flush e sul raccolto? a parer tuo avendo usato prodotti organici, iniziamo il flush una settimana prima di raccogliere? Ultimo ma non meno importante per il raccolto è meglio staccare prima le teste e poi successivamente aspettare la maturazione dei fiori inferiori o staccare piuttosto tutto insieme??? grazie per la pazienza broooo🙏
Maryjane23
Maryjane23
@Ammazzaporri, penso faranno 30g secchi a pianta così a occhio ma dalle foto è difficile! Per avere raccolti più significativi ti consiglio di fare una vegetativa più lunga la pianta crescerà di più e quindi più cime... se poi applichi delle tecniche come LST e topping ancora meglio fatte bene ti assicurano un buon raccolto 3 volte quello che hai fatto a questo giro soprattutto con genetiche barney’s farm! Good luck!!!
Load more (1)
cannapassion
cannapassionweek 2
Good Luck for the futur 🤛💪🌱
Ammazzaporri
Ammazzaporri
love_2_grow
love_2_growweek 0
First grow! Exciting :) Happy Growing, Buddy! 🌱🌱🌱
Ammazzaporri
Ammazzaporri
@love_2_grow, thanks my g 🙏🙏💪🏼💪🏼
Kynareth
Kynarethweek 0
love this
Ammazzaporri
Ammazzaporri
@Kynareth,🔥🔥🔥🔥
TheOtterPilot
TheOtterPilotweek 11
1- what do u think about the pictures of last week? (how we can fix our little problems?) *The first thing I'd do is drop the humidity. If you're at like 72 degrees, your humidity during flower should be more like 45% Your nutrient deficiencies/toxicities can't really be accurately judged if your plants are not up-taking the nutrients they need and that is directly influenced by the VPD. If you are not familiar, check it out. *I'd install a heater and keep the differential between temps between day and night more like 3-5 degrees. and if the temp drops, the humidity needs to drop as well or your plants will not transpire properly. Check out https://vpdchart.com/ 2- we ask suggestions for the distance of the lamp LED MarsHydro TS3000 (last weeks) *get the photone app for your smart phone and check your DLI. if you can get it to between 30-60 mol/m2/d you'll be good. As long as you don't roast your buds in heat, you'll be good. usually 12" is about where I start. Check the bud site and leaf temps to make sure. but my DLI is about 45 mol/m2/d and in the 8-9" range and my leaf temps are 78-80 degrees. my tent temps are like 78 with RH of 50%. 3- we should do an other defoliation? *I'd remove any fan leaves that have a stem longer than a half inch or so. Leave anything you can't easily snip at the stem. 4- what about flush? 🙏�👽 I personally do not flush at all. I do ease way back on the Nitrogen during flower. The plants tend to need less water when they are in flower for me. I keep track of the weight of my pots and water before they feel light, but If I can't pick it up easily, I don't water until the next day. I'm in coco, so that's different. Either way, it goes back to VPD. need the plant to uptake properly so you know when the soil is getting light on nutrients. *Use a bloom booster once a week to bring you P & K up. Your flowers will thank you. Just my 2 cents, good luck!
LegacyMarketFarm
LegacyMarketFarmweek 9
Hey there friend. Congratulations on getting into growing cannabis! I think you are gonna really like it here at growdiaries. looking at your diary, Would you be alright with me offering some pointers? So cannabis plants LOVE heat and humidity. It is the buds that hate it. In veg we want to take advantage of this fact to help our plants grow along much quicker and more vigorously. In veg we can look for temps of 79-84 MAX with lights on & no more than 9 degrees less with lights off. If we allow for too much temperature swing between lights on and lights off while the plant is still growing vertically up to day 20 of flower, We will cause the plant to stretch ALOT which we do not want. So in veg & early flower, Keeping our temperature gaps nice and close between lights on and off is key. Utilizing humidity in our rooms during veg will also help out a lot with more rapid growth but we must introduce it properly. In our rooms we have our temperature and humidity set-points, But when we combine those 2 it forms a third set-point which is the most important & that is called VPD, Vapor pressure deficit. I strongly recommend every new grower or old grower who has not learned it yet, To study and understand it & implement it into your room, Logging your numbers daily. https://cerescann.com/importance-of-measuring-vpd/ For soil, We generally want to go for a PH of 6.1. This website does a GREAT job of illustrating it with a nice graph & very good detailed explanation for soil. https://autoflowerseedshop.com/cannabis-ph-chart-guide/ As we briefly touched on before, During veg & early flower we want our temperature gap's nice and tight to avoid stretch. Why exactly our plants stretch in response to this is a genetic trigger being activated by the environmental stress essentially telling the plant the end of the season is closer than it really is. In veg & early flower the plant is still in its first stage of development which is to grow up wide and tall so when it produces seed, It can cast them out nicely. Remember, Whether we are growing our plants for seed or bud their genetic responses do not change as they gh sidedo not know any different. Once the plant has finished that first stage of growth by weeks 4-6 of flower with most strains, It is by day 20 of flower. Autoflowers you have to watch for it, But once the plant has finished this goal its new mission is to focus 100% on producing nice big flower clusters & to get very sticky so it can attract pollen to it successfully. So once that vertical growth is finished, We actually now want to begin to expose our plants to larger temperature swings between lights on and lights off. This will help activate that genetic response and allow us to draw out the most potential from the strain utilizing the plants genetic triggers to environmental stresses at the right times. We can also take this a step further with doing light deprivation in the last 2 weeks using less light to simulate cloud cover. Very cold feed temps on the last flush is very good too. If you do not have them already, Get yourself a good PAR meter & thermal laser temp gun to monitor your plant top temperatures & optimize how much light your plants are getting. We are currently in the middle of producing a very comprehensive tutorial series for everybody to learn from & understand how to grow the highest level craft cannabis all on their own. If this interests you please check out our youtube and subscribe. The first 2 episodes are out the next one is coming in a few days. If you should ever have any questions or need any help, Please feel free to follow my profile and shoot me a DM. I will gladly help you with the pull down & make sure you get the best quality harvest possible as it is the most important step of the entire process. Good luck my friend!