SensiSeeds 
commentedweek 73y ago
Thanks for choosing Sensi Seeds,
Wishing you the best of luck! :)
like 1
Super Skunk Automatic - Sensi Seeds
VEG
Custom Light Emitting Diodes/100W
Custom
Plagron Batmix Other
Custom
Perlite
Custom
Symbivit mikorrhiza Other
Custom
Earthworm humus Other
Custom
Indoor
Room Type
Topping
weeks 2
LST
weeks 3, 6
Super cropping
weeks 5-6
Defoliation
weeks 6
6 l
Pot Size
1 l
Watering
Start at 11 Week
G
Germination4y ago
Nutrients 1
EmBio
3 mll
BlackAttack420 It sprouted quickly and easily. It soaked in tap water for 6-8 hours, then spent a day between paper towels... it popped up from the medium in just one day. Thank you very much, it's doing well! 🤗💪✌️
likes
comments
Share
Used method
Paper Towel
Germination Method
1
Week 1. Vegetation4y ago
5 cm
Height
20 hrs
Light Schedule
29 °C
Day Air Temp
6.8
pH
No Smell
Smell
55 %
Air Humidity
25 °C
Solution Temp
25 °C
Substrate Temp
24 °C
Night Air Temp
2.5 l
Pot Size
0.1 l
Watering Volume
25 cm
Lamp Distance
BlackAttack420 The tips of two leaves turned a pale yellow by day 3, and I thought the soil might be too hot for it or the lighting was too close. The latter turned out to be the winner; I moved the flower further away from the LED and it pulled itself together, there's no sign of fading. No watering yet, but I do mist it often, and I have a cut plastic bottle… 28-29 degrees Celsius and 75-85% RH. Speaking of which, if the medium burns the flower when it's just a few days old (if it's too hot for it), does that show up on the cotyledons?
1 like
comments
Share
2
Week 2. Vegetation4y ago
10 cm
Height
20 hrs
Light Schedule
29 °C
Day Air Temp
6.8
pH
No Smell
Smell
50 %
Air Humidity
25 °C
Solution Temp
25 °C
Substrate Temp
24 °C
Night Air Temp
5.5 l
Pot Size
0.2 l
Watering Volume
15 cm
Lamp Distance
Nutrients 1
Advanced Silica
0.1 mll
BlackAttack420 Now it's clear that something is happening, that's why I'm going to transplant it into a bigger pot before night falls. Meanwhile, the mixing fan (7.5v) is working inside, and instead of the 50w UFO LED, I've installed 4x50w artificial sun lights. The Skunk visibly likes it, stretching its leaves upward. 27-29 degrees Celsius, around 50-55% RH. On day 14, I topped the Skunk, and it's getting silica. So far, everything is going according to plan. I'm so happy that I'm rolling one... 💪✌️
1 like
comments
Share
Used techniques
Topping
Technique
3
Week 3. Vegetation4y ago
15 cm
Height
20 hrs
Light Schedule
29 °C
Day Air Temp
6.8
pH
No Smell
Smell
70 %
Air Humidity
25 °C
Solution Temp
21 °C
Substrate Temp
24 °C
Night Air Temp
5.5 l
Pot Size
0.3 l
Watering Volume
15 cm
Lamp Distance
Nutrients 2
Embio
2 mll
Advanced Silica
0.1 mll
BlackAttack420 So, week 3 is starting. I tied down the skunk, I didn't want to but it just needed it... so far it looks healthy. Its water needs have increased to 0.3-0.4 liters a day. Everything is going according to plan. Only 10 weeks left! 🤗😄💪
1 like
comments
Share
Used techniques
LST
Technique
4
Week 4. Vegetation4y ago
25 cm
Height
20 hrs
Light Schedule
26 °C
Day Air Temp
6.6
pH
Weak
Smell
60 %
Air Humidity
25 °C
Solution Temp
21 °C
Substrate Temp
23 °C
Night Air Temp
5.5 l
Pot Size
0.4 l
Watering Volume
30 cm
Lamp Distance
Nutrients 3
Embio
2 mll
Greenman floralia
2 mll
Advanced Silica
0.1 mll
BlackAttack420 So, Super Skunk Automatic. It's growing just as the big book says. So far, I have no complaints. Strong vital plant, very explosive! The smell is still very mild even now. This morning it was like I saw the first white hairs... I'm wondering if I should take off some of the big fan leaves, but I don't have the heart to hurt it.
likes
comments
Share
5
Week 5. Flowering4y ago
35 cm
Height
20 hrs
Light Schedule
26 °C
Day Air Temp
6.6
pH
Normal
Smell
45 %
Air Humidity
25 °C
Solution Temp
21 °C
Substrate Temp
23 °C
Night Air Temp
5.5 l
Pot Size
0.8 l
Watering Volume
15 cm
Lamp Distance
Nutrients 3
Lyle’s Black Treacle
1 mll
Alga Bloom
2 mll
Advanced Silica
0.1 mll
BlackAttack420 I'm not sure if this plant is suitable for micro growing, it's just starting to stretch but there's hardly any room to go up... its true strength will show during the outdoor season. That said, I have no complaints. Flowers are starting to form at the nodes. Starting this week, it's getting Plagron Alga Bloom, and I'll be increasing the amount weekly. I've also introduced molasses, but I don't know exactly how often I'll use it yet. I'm keeping an eye on the plant and will adjust accordingly. For now, there seems to be enough nitrogen in the medium, the leaves are dark green. 💪✌️
likes
comments
Share
Used techniques
Super cropping
Technique
6
Week 6. Flowering4y ago
40 cm
Height
20 hrs
Light Schedule
26 °C
Day Air Temp
6.6
pH
Normal
Smell
35 %
Air Humidity
25 °C
Solution Temp
21 °C
Substrate Temp
23 °C
Night Air Temp
5.5 l
Pot Size
0.8 l
Watering Volume
15 cm
Lamp Distance
Nutrients 3
EmBio
3 mll
Alga Bloom
2.5 mll
Advanced Silica
0.1 mll
BlackAttack420 So, week 6 is starting. Only 6-7 weeks left… 😃 I had to break some branches a few days ago because they are stretching like crazy. I tie and shape the canopy every day, it's growing in both directions, I can barely keep up. The stretching never seems to end… from this week on, I'm cautiously increasing the nutrient dosage, so far the skunk is handling it well. Although I might be pushing it because the leaves are dark green. 💪✌️
likes
comments
Share
Used techniques
LST
Technique
Defoliation
Technique
Super Cropping
Technique
7
Week 7. Flowering3y ago
40 cm
Height
20 hrs
Light Schedule
30 °C
Day Air Temp
6.6
pH
Normal
Smell
30 %
Air Humidity
25 °C
Solution Temp
21 °C
Substrate Temp
23 °C
Night Air Temp
5.5 l
Pot Size
0.8 l
Watering Volume
15 cm
Lamp Distance
Nutrients 2
Alga Bloom
2.5 mll
Advanced Silica
0.1 mll
BlackAttack420 It seems that the stretching of the branches has stopped, so now there's happiness! The flowers are developing outward, and there's even some starting resin in places. I replaced the Chinese LED panels with a Mars-hydro ts600, which generates more heat. I'll figure something out for that. The upper leaves seem to be starting to fade a bit; I've ruled out nitrogen deficiency. I think there might be an issue with magnesium. If the fading gets worse, I'll first check the runoff pH and then act accordingly. Yesterday, I sprayed the canopy with Epsom salt solution. Other than that, no complaints. The skunk is at the halfway point, and from here on out, it will be forming the flowers. 💪😄✌️
likes
1 comment
Share
8
Week 8. Flowering3y ago
45 cm
Height
20 hrs
Light Schedule
25 °C
Day Air Temp
6.6
pH
Normal
Smell
30 %
Air Humidity
25 °C
Solution Temp
21 °C
Substrate Temp
23 °C
Night Air Temp
5.5 l
Pot Size
0.8 l
Watering Volume
15 cm
Lamp Distance
Nutrients 2
Alga Bloom
2.5 mll
Advanced Silica
0.1 mll
BlackAttack420 I had some issues last week, so the Skunk stopped growing. I think I’ll manage to fix my mess. One thing's for sure, the genetics are king! Super Skunk can take it all. It started when I put in the 100w Mars-Hydro light without being able to adjust the distance because of the height of the garden. I was greedy, I deserve it! Light burn, 33 degrees Celsius, along with Ca and Mg deficiency… great 😕 I moved the whole garden to an unheated garage outside, 14-16 degrees Celsius… super… three days ago I brought everything back to the original spot and put the weaker lights back, and I watered with 6.6 pH water, it’s starting to bounce back! 🤗
1 like
comments
Share
9
Week 9. Flowering3y ago
45 cm
Height
20 hrs
Light Schedule
27 °C
Day Air Temp
6.4
pH
Normal
Smell
30 %
Air Humidity
25 °C
Solution Temp
21 °C
Substrate Temp
23 °C
Night Air Temp
5.5 l
Pot Size
0.8 l
Watering Volume
15 cm
Lamp Distance
Nutrients 4
Lyle’s Black Treacle
1 mll
CANNA PK 13/14
1 mll
Alga Bloom
2 mll
BlackAttack420 Sorry in advance for the crappy pictures, if I have time I'll take some decent ones! So, the above Super Skunk is developing normally again. The Calcium/Magnesium issue is much milder than last week, so I don't have to worry anymore. The upward growth has completely stopped, now the flower is just focusing on resin production and fattening up, and I really like its smell. Skunks have always been my favorites, and it seems like that will remain the case. It's growing in a small space (there are 2-3 crispy leaves on top), so I thought it was better to put the Chinese LEDs back in, the Mars-hydro ts600 was too strong for it. Since then, it's thriving and fattening up again. I'm predicting about 25-30 days for it, in the next week or two it will still get the same nutrients, and in the last two weeks, it will get the T.A. Finalpart (Ripen)... 💪✌️
2 likes
7 comments
Share
10
Week 10. Flowering3y ago
45 cm
Height
20 hrs
Light Schedule
28 °C
Day Air Temp
6.4
pH
Strong
Smell
30 %
Air Humidity
25 °C
Solution Temp
21 °C
Substrate Temp
23 °C
Night Air Temp
5.5 l
Pot Size
1 l
Watering Volume
15 cm
Lamp Distance
Nutrients 3
CANNA PK 13/14
1 mll
Alga Bloom
2 mll
Advanced Silica
0.1 mll
BlackAttack420 It's starting to come together, girl. I can't provide fresh pictures right now, I uploaded some from 2-3 days ago. Since then, the Super Skunk has shed a few leaves and reacted well to it. The trichomes are starting to cloud up and thicken. And of course, the buds are forming and getting fatter. Today is day 65, and I'll let it live for another 20 days. Next week, the Ripen treatment (Terra Aquatica Final Flash) starts, which I'll use for 15 days. After that, it'll only be watered with plain stagnant tap water. I'm slowly reaching my goal, and I'm gonna get so high. I'm going to take some massive hits, just let it dry. 😅 But there's still time until then...✌️
1 like
comments
Share
11
Week 11. Flowering3y ago
45 cm
Height
20 hrs
Light Schedule
27 °C
Day Air Temp
6.4
pH
Strong
Smell
30 %
Air Humidity
25 °C
Solution Temp
21 °C
Substrate Temp
23 °C
Night Air Temp
5.5 l
Pot Size
1 l
Watering Volume
15 cm
Lamp Distance
Nutrients 2
FinalPart
2.5 mll
Advanced Silica
0.1 mll
BlackAttack420 70 days for my old girl. Unbelievable, but it's really just days away from total high. The Skunk is healthy and puffing up quite well, the resin is being produced, I have no complaints. Speaking of resin, the amber-colored trichomes have appeared, most of the resin is still milky/cloudy. I'll be harvesting in 10-15 days… 💪✌️
likes
comments
Share
8 comments
Sort by
popularity
popularity
newest
oldest
BlackAttack420 commented3y ago
@SensiSeeds,
Dear Sensi! I also grow an Alpine Delight Automatic (I grew it for my wife) next to the Super Skunk. What is the best aspect for harvesting? I mean resin color, hair color, etc... are the same considerations true for it as any other normal strain? I would like to present the best/most effective flowers to the partner of my life. Thank you for reading, and thank you in advance for your answer!
likes
takecua commentedweek 93y ago
Brother
It looks good. The fact that your leaves burned isn't because of that hydro marsh; that light is one of the best... I think you haven't placed the pots at an adequate distance. Give it at least 35 centimeters and guide yourself by the temperature at the tips of the buds between 23 and 25 degrees in vegetation and 24 - 26 or 27 max in flowering... what I do is stick a thin stick into the pot that reaches the top of the plant and put the sensor of the thermo-hygrometer at the tip of the stick with tape... if, for example, the light is 1 meter from the plant and the temperature at the tips of the plants shows 21, then I bring the light closer and keep testing until I find the height that gives me the right temperature at the tops... always respecting the initial distance limit... and if it's the other way around, where you have the light 1 meter away and the temperature at the tops shows 27 degrees, then you leave them as far away as you can and add more ventilation and extraction 🙌🏽💚💚💚🙌🏽
likes
BlackAttack420 commented3y ago
@takecua, First of all, thank you very much for the advice! The Mars-Hydro Ts600 is a great light, that wasn't the problem. But what you tried to refer to, the distance between the Led and the flower. The size of the box is 74x36x65cm. Of this, the flower pot takes 25 centimeters, and the LED takes 10 centimeters. I'll admit like a man, I didn't think I'd be able to grow the girl so big! 😁 I looked less of myself and of genetics, this is a surprise to me. 😅 I learned a lot, the next round will start in a bigger box. I remember, under the Ts600 it was also 33.5 degrees C... 3 flowers are growing in the garden because I can't get enough, they are hard to fit. I made their lives miserable with several types of training, grateful plants! Thanks again for trying to help!
like 1
takecua commentedweek 93y ago
I'm now going to buy a quantum board LED Samsung LM 301H 3500k 660 IRUV BLUE 150w for a cabinet that's 50cm x 50cm x 1 meter high. They're the best LEDs at the best price. If you want, I can send you the link; they're from AliExpress. Cheers and good luck with the indoor grow! 🙌🏽💚💚💚🙌🏽
likes
BlackAttack420 commented3y ago
@takecua, Thank you, colleague, but I would like to test the Ts600 in the next round, I received it as a gift. For some reason I really trust this led. 💪✌️
likes
takecua commentedweek 93y ago
I also recommend some YouTube channels where you will learn a lot; they are my teachers.
DA FUNK
Mr. Sour 420 growing
PROFESSOR AUTOFLOWER
BUBBLEPONICS KING
I've learned from them. And thanks to them, I get very good quality productions... I'm sure you know some of them, and if not, I hope it helps you and share.
Long live marijuana! Greetings from the north of Africa, south of Spain 🇪🇸 🙌🏼💚💚💚🙌🏼
likes
BlackAttack420 commented3y ago
@takecua, Oh Man! Grateful thanks! Tomorrow night will be a perfect relaxation for me. English is not my strong point, but it's great for tomorrow night's program! I have to watch it several times to see it perfectly, I have time because I have settled in for a long life! peace Bro.
likes
Enjoying this diary? Follow for more updates!
Prefer the old Diary view?
Go back to the old Diary view