Chat
RecommendedRecommended

Glookies

Approved by Barney's Farm
10
89
13
1835
a year ago
Follow
10
Indoor
Room Type
LST
weeks 5
Topping
weeks 5
Defoliation
weeks 5
Coco Coir
Grow medium
Perlite
Grow medium
Castings
Grow medium
18.927 l
Pot Size
Grow Conditions
Week 11
Flowering
30.48
cm
inch
Height
12 hrs
Light Schedule
8+ conditions after
Login
Nutrients
ml/l
ml/gal
tsp/gal
Commented by
WoEsWar WoEsWar
a year ago
10/14-10/20 10/14: After lowering the temperature in the tent about 5 degrees, the leaf tip burn has stopped. This is the second time I believe I have successfully controlled the Grow Dots release rate with temperature adjustments (maybe--more experiments are needed, but it sure seems like it gives you a great amount of flexibility). The tent is crowded, but the temp/RH/VPD have been perfect (see image). Branches seem too spindly. I'm worried that the buds aren't going to fatten up enough. We'll see. Lots of time left. Still hand watering (1/2gal per day per plant) 10/16: The lower fan leaves on one plant are yellowing a lot (the left side, or "bigger" plant with the larger light). They also happen to be below the largest buds. The largest buds also happen to be closest to the light. After reading around a bit, here's what I think happened: The parts of the plant closest to the light were getting too much light, which caused the fan leaves to yellow and start to die. The DLI was close to 60 for those parts of the plant, which is WAY too high. I turned it down, and now it's around 45 for the big buds, and 35-40 for the remainder of the plant. I wish there was a way to move the larger buds further away from the light, but there's not because of space limitations. I still have some concern about the size of the buds. I think I'm going to end up with a whole bunch of apricot-sized buds and no big kahunas. It doesn't seem like it will be the yield I hoped for, and I am no sure why. A common comment in the Glookies diaries I've seen is that the yield was below expectation. Lots of time left--maybe they'll fatten up a lot. 10/16 (again): I had a little extra time today so I built a DIY CO2 generator. See video. There's some chance it will overflow and/or explode and spray yeast and sugar all over the place. I plan to watch carefully. The pump and heat mat are on a timer so that they're only going when the lights are on. 10/20: Last day of this week. I turned down the light and the leaves stopped yellowing. So, problem solved. The plants look as good as any other Glookies diary I see on here for this far along. I am using every available inch of this tent. I've been as careful as I can about keeping things spaced for airflow. Daytime temps: 78F; nighttime: 67F. Humidity staying steady at 55. I didn't water yesterday because the bags felt too wet on the bottom. The pot bases are bone dry today, so I should be good to water again tomorrow. I hit them with Recharge day before yesterday.
Similar Diaries
Anesia
5 weeks
AnesiaMorrTyy420
+1 strain
a minute ago
Living Soil - LST & ScrOG
12 weeks
Living Soil - LST & ScrOG Oldwied
+1 strain
2 minutes ago · 3 comments
Royal Haze Auto & Hyperion F1
8 weeks
Royal Haze Auto & Hyperion F1 Keimenmann
+1 strain
2 years ago · 10 comments
Critical RQS
12 weeks
Critical RQSBEACHBUDZ757
Critical
2 years ago · 16 comments
GHS Jack Herer LSO & Cronk nutrients
7 weeks
GHS Jack Herer LSO & Cronk nutrientsWILFY
Jack Herer
2 years ago · 2 comments
First Harvest Time/DIY Automated Grow
8 weeks
First Harvest Time/DIY Automated GrowWoodsonCult
Pineapple Breeze
a year ago · 11 comments
Colombian Gold cross Critical Bilbo Auto
4 weeks
Colombian Gold cross Critical Bilbo Autothe420dude
Colombian Gold cross Critical Bilbo Auto
2 years ago · 3 comments
Grow Questions
WoEsWar
WoEsWarstarted grow question a year ago
Does anyone see any problems with the CO2 supplementation station I made (see video in Week 11 of this journal)? I'm going to watch carefully for overflows. Curious if it's enough to make a difference.
Open
Setup. Other
1 like
Answer
MinnesotaMarijuana
MinnesotaMarijuanaanswered grow question a year ago
Beware that distributors will typically only exchange their own tanks. They won't exchange tanks you bought on Amazon or something.
like
Complain
MinnesotaMarijuana
MinnesotaMarijuanaanswered grow question a year ago
My experience with CO2 reactors in aquariums have not been very good. It is usually inconsistent and not worth the trouble. The only time I achieved good results were after I got a small tank and diffused it into the water using a regulator and air stone. There is a little bit of an up front investment for the tank and regulator, a 5 or 10 lb tank isn't very expensive. When they are empty you swap them out for a full one, refills are pretty cheap. You can get them from a welding supply store like Airgas or LInde. They need a specific regulator (most Argon and CO2/Argon mixture tanks use a regulator with a male connector, C02 regulators use a female and need a plastic washer that fits inside the fitting. Gas distributors give the washers out for free and usually have a little dish full of them at the counter). Lots of people use CO2 for flux core welding and in beer taps.
like
Complain
Sciolistic_Steve
Sciolistic_Steveanswered grow question a year ago
For a smallish room and a few months, you need something like 30lbs of sugar to boost into the 1000-1300 range. size of room matters. rate of co2 released from the reaction of yeast and sugar can be used to determine a good guesstimate of PPM added to the space. you know the moles release per time increment then convert to ppm with the space involved. the more tightly sealed the area is th emore accurate the math will be -- also the less often you open it up etc. this is easily calculated with a few google searches. i'll leave that to you. it doesn't have to be an unknown or guess... if you don't want it to be.
like
Complain
WoEsWar
WoEsWarstarted grow question a year ago
I read online that if you mix silica with other nutrients it decreases nutrient bioavailability. However, the directions on the side of the bottle of GH ArmorSi recommend mixing the silica and nutrients together. Who's right?
Open
Feeding. Other
like
Answer
SkunkleDamo
SkunkleDamoanswered grow question a year ago
You can but always add the silica first and mix well
like
Complain
Team_Ballsfor
Team_Ballsforanswered grow question a year ago
that was written before i saw any other response.. if it stepped on someone's toes it was a generalized statement only.
like
Complain
Team_Ballsfor
Team_Ballsforanswered grow question a year ago
Plants need very little silica. Regardless of what AN instructs, i'd do some research for more educated answers than you'd get from the peanut gallery. AN has a habit of being a greedy little punk bitch manufacturer... splitting things into 10+ products when you could mix it into 2 or 3 safely. There's no need for 12 bottles of various fertilizers and supplements.. that's just greedy/predatory business practices. looks like soil typically contains 14-40 ppm out in the wild.. that doesn't mean it is optimal, but will correlate well, i bet. Using vermiculite can add available silica to your substrate, too
like
Complain
Comments
Login

Show by Week
Sort by
popularity
popularity
newest
oldest
Grow_for_Happiness
Grow_for_Happinessweek 2
That's a great use for those bases, I'm gonna have to try that next run. Am interested to see how they work for you, I tried with soil and was not great success, but I'm pretty certain it was mostly because my substrate was not nearly airy enough. Cheers!
BudBoutique
BudBoutiqueweek 12
great work buddy - looks similar to mine a bit haha 💚
Alice_in_Wonderland
Alice_in_Wonderlandweek 5
Here’s to hoping plant #2 fixes herself with the adjustments - good luck!!
GoldenFinger
GoldenFingerweek 0
Viel Glück buddy 💪 , viel Spaß beim Wachsen von 🌱
DoughHead
DoughHeadweek 11
I am in need of a watering system. The bluemat is appealing but scares me that it keeps it wet. What about mold, pests, gnats? It scares me. I grow in coco and always allow a dryback so the roots push to find water. Although I've been advised to not do this and to keep them soaked daily. This person swears by it and with 90 diaries on here and a YouTube his result verify his claims. What's your thoughts on the bluemat? Would you prefer a normal water system with a pump and it drain to waste? Thats another thing I'm used to runoff daily and checking the ppms. Do you do this with bluemats? They seem convient but I've not seen massive harvest with them yet although I've truly not looked hard enough yet. I've spent little time searching about them. Any advice is appreciated growmie. Good luck, and keep us posted on the co2. I'm also interested In something similar! ✌️
DoughHead
DoughHead
@WoEsWar, something like that is exactly what i was thinking of doing. To do enough for 10 plants in 2x 4x4s it was nearing or over $300 for that I could get floraflexs automatic watering with the bases that allow for drainage. I might just do that. Unfortunately they sell the kit for only pairs of 2 and 3. For example kit for 4. Kit for 6. Kit for 9. I need one for 5. Guess I could modify one. I'm going to have to set down and design a system that allows for runoff. Idk how to check runoff for individual plants in a system like this. To my knowledge it all runs together into one big tray for runoff.
WoEsWar
WoEsWar
@@DoughHead, I've had the best results with coco/perlite plus "high frequency fertigation" (https://www.cocoforcannabis.com/). However, it's a pain in the ass to hand water multiple times a day. The pot bases + blumats were my attempt to reduce how much work I had to do (that along with the Grow Dots, which have been fine so far). This is my first grow with them. I thought that in combination they would keep a whole 5-gal moist. So far, it has been a combination of being a little too wet or a little too dry. I haven't been able to get them to work together as well as I'd hoped. The problem is that as the plant grows, it changes and its water needs change. I think Grow Dots + hand watering is the way I'll go next time. If I have to go out of town, I would feel confident using the pot bases or the Blumats. They're good to have around. If I was designing from the ground up and had the room to do it, I'd try an automatic watering system like this: https://www.cocoforcannabis.com/guide-to-automatic-watering-systems-for-indoor-cannabis/
Lemonhazelover
Lemonhazeloverweek 15
She looks very happy with your gardener's hand🧑‍🌾 Happy growing and good luck buddy ☘️
BerrySweetHigh
BerrySweetHighweek 14
Beautiful pictures! 💚
Marshydrots1000
Marshydrots1000week 13
Look good !
Herbie101
Herbie101week 12
These glookies are looking tasty buddy! Good luck for the rest of the run 🌱🌞🍀
DoughHead
DoughHeadweek 11
BTW if this is your very first grow then bro you nailed it. Fr! You spent the time doing research, have a wonderful setup and are definitely putting the effort it. Congratulations your harvest is going to be fire! If not your first grow, still Congratulations on the killer looking ladies bro.
420DeepGrow
420DeepGrowweek 16
Que pinta 😋, enhorabuena 💣💎