Chat
RecommendedRecommended

Indoor Juicy Pussie auto (cheap setup)

1
41
34
543
a year ago
Follow
1
DIY piping with some foil sheets
Indoor
Room Type
LST
weeks 3-8, 11
Defoliation
weeks 3-6, 8-12
Soil
Grow medium
Perlite
Grow medium
Vermiculite
Grow medium
25 l
Pot Size
Grow Conditions
Week 2
Vegetation
8
cm
inch
Height
18 hrs
Light Schedule
11+ conditions after
Login
Nutrients
ml/l
ml/gal
tsp/gal
Grow Boost
3 ml/l
Commented by
kardel kardel
a year ago
D8 - Mistake were made again, I watering her in the morning and pour too much at her root and wash a soil down. Comeback later her trunk cannot stand tall, I put a stake to help her ups and hour later fill pot with a 50/50 peatmoss/perlite. Hope a case is close Just get a temp sensor today, my environment is nothing close to ideal. I only can provide more humidity, tryna bring it up maybe use humidifier later if required After try to push up humid but only reach 70-75%, at first i put the light off during day to prevent heat but cannot control it much more so i switch to turn off at night to give her full sleep with cooler temp D9, at first I willing to deal with hot at my grow room but it really hard. I reposition my tent down to first floor which is living space, I work at home so AC will turn on during days. Temp might reach 30°C. Switch to 18/6. I have 2 little furry friends, That why i dont want to grow down here but sigh, will pick they hair out when it ready to taste 😅 Last checking temp stay around 30°C but humidity drop down to 50-55 D10 - first day of normal light routine . Off at 22.00 On at 4.00 she a bit slow due to recovered from heats but looking good day by day The most first moment that i most waiting for is when you comeback to see plant in the morning she emerg new leaves like crazy is so satisfy and i think it nearly coming D11 - last night i was wish by raining here and rainy season is coming, humidity greatly increase to 85 at sleep time. Hope when she into late flowering a weather is more dry. She grow happier than yesterday, no sign of problem for now Her trunk thickening more and almost out of seedling stage ? D12 - She full recovering at 4th node I guess? Also still on 3 fingers and hope for next nod became more mature. Some clue at node about to branch soon stem look almost ready? Any advice with my thought will be great! Come back late night a plant saw some light stress i pull a panel ups a bit D13 - She more recovered. Patient wait for new branches emerg as for finish seedling stage, give light feed D14 - She seem responsive well with what I feed her, a lot develop on her trunk and look solid today also branch start to thrive. A little sign of overwatering at new foliage look droopy at bottom finger maybe cause by ramp up dosage from 500ml to 1000ml. And yey she develop her new fan leaves to 5 finger is a good thing note: pH pen just arrive and I measuring my water is a much off (far to alkaline around 7.3 tap water) and my pH down will be coming in couple days so she take a pH 7.3 tap water from start and on her day13 i fed her with pH 7 with 1/4 dosage off nutes mixed. End of weeks 2 I done everything can do for now, She seem happy while getting greener. Hope she grow well. Will start LST next week and considering about sCrog
Similar Diaries
RQS Strawberry Cough
4 weeks
RQS Strawberry CoughJayDoobie
Strawberry Cough
2 minutes ago · 2 comments
Help a brotha out. First grow ever.
4 weeks
Help a brotha out. First grow ever. FLOGROWNDIARIES
Sour Diesel Autoflower
2 years ago · 8 comments
Delicious
4 weeks
Delicious Odin1984
+1 strain
2 years ago
Gorilla Zkittlez Fem x4
16 weeks
Gorilla Zkittlez Fem x4Trrip
Gorilla Zkittlez
2 years ago · 6 comments
AutoCreeper - Super Sativa Seed Club.
9 weeks
AutoCreeper - Super Sativa Seed Club. Sup3rNov4
Auto Creeper
2 years ago · 2 comments
M33 lava flow
17 weeks
M33 lava flowEauderay
Lava Freeze
2 years ago · 4 comments
420FastBud
5 weeks
420FastBudOdin1984
+2 strains
2 years ago · 4 comments
Second indoor grow
21 weeks
Second indoor growmcochran1998
+1 strain
2 years ago · 3 comments
Grow Questions
kardel
kardelstarted grow question a year ago
Im on day4 for my third time start growing and without temp&humidity kit for the growth (including monitor item) The last two was on the same setup but not as hot as now (over 32-35°c) so i havnt encounter that issue and dont know if my plant is doing ok Best regard
Solved
Plant. Other
Setup. Lighting
like
Terp1
Terp1answered grow question a year ago
Die aufgestellten Zacken an den Blatträndern signalisieren dir, dass die Pflanze zu viel Licht bekommt. Viel zu viel für so ein kleines Baby. Hänge das Licht höher oder dimme es. Wenn deine Temperatur über 30°C hat, dann versuche die Luftfeuchtigkeit auf ein Maximum zu bringen. Hänge am Besten nasse Handtücher mit ins Zelt, das hilft gut. Viel Erfolg und happy gardening 💪😎
kardel
kardelstarted grow question a year ago
Hi im newb this is 3rd times growing I keep daily update to see if I growing in efficiency way Still lack of almost need but try to do what I can do, pH pen coming 1 do i setup right wet towel 2 trunk 1.5mm d10 3 is 450 ppdf good for now node1&2 is mistake & improp germination
Solved
Other. General questions
Setup. Ventilation
like
Terp1
Terp1answered grow question a year ago
Topping bei Autoflowers funktioniert schon. Sogar Main-Lining. Ich mache ML gerade selbst an einer Apricot Automatic von FastBuds und diese sieht fantastisch aus! Das Ding ist halt, die Pflanzen müssen in einem absolut tadellosen Zustand sein, um die Ernte nicht zu gefährden. Und das sind die Meisten eben nicht. Die Grower nehmen ihre sie absolut schwachen, schon gestressten, überwässerten und unterversorgten Pflanzen und setzen diese dann noch den Stress des toppens aus. Das ist das Problem. Nicht, dass man Automatics nicht toppen darf. Das ist pauschal einfach nicht richtig. Ich habe für das Toppen sogar eine fast stressfreie Technik, die sogar ohne Schere oder Messer auskommt. 😎
kardel
kardelstarted grow question a year ago
Hi GD, want to make sure I'd give her microdose nutes? Already give her 1/10 what the bottle . This is d13 morning soil is reusage She take a lot of stress at her first week so 2 bottom node look cringy, do they gonna have a good branch or better lollipop they next week? TIA
Solved
Setup. Strain - Autoflowering
Feeding. Schedule
like
GreenHarvest_Official
GreenHarvest_Officialanswered grow question a year ago
Lollipopping is something you do much later in your grow, right before flowering. I think you are talking about Mainlining. With regards to the feeding I think you can start watering + feeding a bit more. In this stage I like giving it a rest period of around 4 days maybe even more between each watering but your plant needs a but more feed because the leaves should be a bit darker. Good luck with the rest of your grow
kardel
kardelstarted grow question a year ago
Hi. She is 26 days old, heats stress stun week 1 I do agressive defo and tie her top node down continuing I try to attemp same concept as mainlining, this 2 day from last defo, do you think this is recovering good enough? Was planing to lst new branch and lollipop next week. TIA
Solved
Setup. Strain - Autoflowering
Techniques. LST
Techniques. Defoliation
like
Stork
Storkanswered grow question a year ago
Bad idea to do that to an auto. My motto is do not touch Auto in veg or very little if it must and then in flower 2-4 weeks you can do slowly lollipop 🍭 btw I will say don't do anything right now
kardel
kardelstarted grow question a year ago
Hi this for my correctness. normally I see new growth look like this I call preflower, but pistil still develop and no hair (should come soon) it on her 33 days old from sprout I looking for last day of major training and let her grow after 1-2 weeks from preflower TIA again guys
Solved
Other. General questions
Setup. Strain - Autoflowering
Techniques. LST
like
SkunkleDamo
SkunkleDamoanswered grow question a year ago
Yes I would say it's in preflower. I usually say that when all the tips go a lime greenish colour is end of week one End of week 2 pistils are showing End of week 3 and the flowers will be like a button shape. Hope this helps
kardel
kardelstarted grow question a year ago
I heard too much heats may cause slow develop. and I training this girl aggressively. My normal timeline in past 2 growth should be week 2 or 3 blooming now. She got heats stunt at her first week, stable condition is 30degree celcious with around 45-60% RH. watering with pH 6.5
Solved
Plant. Other
1 like
Stork
Storkanswered grow question a year ago
Well your EC is good your humidity is not bad and your temperature also is not that bad, in my experience if you stress auto too much she will start Flower way too early anyway the longer veg the better yield my Bruce banner auto-start to Flower at week 7 you plant look good I don't see any problem you are panicking 😎 now let her grow do not cut any leaves wait 1-2 week then if nothing happen you can switch manually 🍻
kardel
kardelstarted grow question a year ago
Hi guys. Finally my girl bloom here on day62. Pistil shown since around week5. How long and how height this gonna be? Afraid of potential size. If she go tall what time to do a safe supercropping? And from this how long she been flowering week count? Thanks in advance
Solved
Setup. Strain - Autoflowering
1 like
Sciolistic_Steve
Sciolistic_Steveanswered grow question a year ago
Based on current week, you are at least 7-10 days into flower phase. You've got tufts of pistils on terminal nodes. you probably have 3-4 more weeks of vege growth remaining as it continues to transition. This can vary quite a bit based on plant. autoflowers are not aliens. they act the same way as photoperiods do except for the trigger to bloom. they want the same ratio of nutes, too. the whole perception that they are different in many ways is nonsense. it's just marijuana plant. Here's what is odd. This plant took a long time to enter flower phase. did you change light schedule or still on a long day / short night cycle? if you changed the cycle, stick with the long night.. if not, no worries. few autos take that long to switch over to flower. some are bred for this trait, because it does improve potential yield. if you had to change light schedule to move things along, it's a photoperiod and the breeder fucked up somehow. if not, it's just an XL auto with a long vege period.
kardel
kardelstarted grow question a year ago
my plant is 14 weeks old from sprout. she develop slow-rate at her seedling and early veg. I train her almost every two day. she start fattening and in a few weeks i guess ? at least 2 weeks. and she getting mold ! get rid of that buds and branches and hope it not spread.
Open
Buds. Other
Other. Mold
Setup. Strain - Autoflowering
like
Answer
AsNoriu
AsNoriuanswered grow question a year ago
like
Complain
Mr_Weeds_Autos
Mr_Weeds_Autosanswered grow question a year ago
I had an Original Skunk Auto go for 18 weeks, the longest ever. It did turn out ok though. Smart that you got rid of the mold hopefully she finishes up in the next couple of weeks. Good Luck Growmie.
like
Complain
Comments
Login

Show by Week
Sort by
popularity
popularity
newest
oldest
Chucky324
Chucky324week 4
Hello. I saw your question about RH and wanted to give my answer I thought the one you picked was poor. Plants have a hard time breathing (transpiring) under 35% RH same with over 70% RH. I can walk into a grow room and smell if it's too moist. I read a study awhile ago that said white powdery mildew starts around 70* f and 65% RH. In veg try to not be over 60% RH and in flowering keep it above 45% rh to 55% RH. Hope that helps. Chuck.
Terp1
Terp1
@kardel, das was Chucky sagt, ist nur die halbe Wahrheit. Es geht hauptsächlich und IMMER um VPD. Du musst Temperatur und Luftfeuchtigkeit gezielt einsetzen (regulieren) um der Pflanze immer den bestmöglichen VPD zu geben. Ist die Temperatur zu hoch (aber du kannst diese nicht mehr senken) und dein VPD sinkt deswegen zu stark, MUSST du die Luftfeuchtigkeit erhöhen. Notfalls eben auch in der Blüte mal über 60%. Richtig ist aber auch, dass man die RH in der Blüte <= 55% halten soll! Deswegen sollte man am Besten die Temperatur entsprechend nach unten regulieren können, um den richtigen VPD zu haben. 💪😎
kardel
kardel
@Chucky324,thank you man. I tryna keep them around 65% too since i feel it too moise and soil dry out too slow. And humidifier make tent cooler so i dont need maximum RH. Thank for responding man. Let the girl paid off and will see and improve next time❤️
Herbie101
Herbie101week 9
Great diary so far! Keep up the good work dude!🌱🌞🍀
Herbie101
Herbie101
@kardel, Life happens, but great when you find the time to do some updates🤙
kardel
kardel
@Herbie101, Thanks! Try to keep updating but way more busy lately😬
BudBoutique
BudBoutiqueweek 10
well done buddy - might be a but hungry <3
kardel
kardel
@BudBoutique, Thanks bro! She live in reuse soil so might be from that less nutrient.
Terp1
Terp1week 9
Ein wenig hell die Dame aber die schaut richtig gut aus. 💪😎
Terp1
Terp1
@kardel, ich habe die kompletten Triebe bis hin zum Hauptstamm abgeschnitten. War aber egal... der Schimmel kam, wo auch immer er wollte. Insgesamt waren es (geschätzt am restlichen Ertrag) schon ca. 40 Gramm, die ich dabei entfernen musste. 😐 Halte die Luftfeuchtigkeit dringend bei <=50% und stelle einen zusätzlichen Ventilator auf. Die Pflanze muss sich im Wind IMMER bewegen. (aber nicht zu stark) Viel Glück Bro 😎
kardel
kardel
@Terp1,hey bro. I also got Mold 💩. how much did you remove from your watermelon last crop ? and did same branches buds got more infected? part of learning again 😑 thanks for help brother 🙏
kardel
kardel
@Terp1,thanks bro! I was struggling at this stage before. Try to make sure she ok 😇 Yo and after daily monitoring today she appear more color on pistil. Amaze me since this is first healthy flower I grow and first not green weed to me 😆. Your advise safe this girl a lot!🙏
Load more (8)
Terp1
Terp1week 3
Das LST gefällt mir sehr gut. Wirklich gute Arbeit mein Freund. 💪😎
Terp1
Terp1
@kardel, ich habe dir nicht ganz die Wahrheit erzählt. 😅 Die allerersten beiden Triebe, also die an den Blättern mit nur einem Glied / Finger herauskommen... Diese schneide ich IMMER ab 😎
kardel
kardel
@Terp1,Thank alot man! My previous grow was quite a bit not fattening and i keep all branches, That why I always have this question in my head. it might be because of low amount of water that i watering (only 2 liter per 2days, 5gal pot) and no pH measure that times. will let her grow then 🙏
Terp1
Terp1
@kardel, da ist nichts zu viel mein Growmie. 😎 Lass sie sich dehnen und entscheide danach. Ich fange nach dem Dehnen immer an die Triebe einfach mit Drähten und am Zelt befestigten Schnüren auseinander zu binden. Das kann man im letzten Update ein wenig erkennen. Solange man dafür genug Platz im Zelt hat, sind es niemals zu viele Shoots. 💪 Die Top der höchsten Triebe binde ich während der Dehnung auch immer nach unten.
Load more (3)
Terp1
Terp1week 0
Kleiner Tip: auch wenn es sehr beliebt ist, aber lasse das Papiertuch bei der Keimung das nächste Mal einfach weg. Dann gibt es solche Probleme mit den Wurzeln, wie bei #2, in Zukunft auch nicht mehr. Ich hatte mir meine letzte Gorilla auch mit dem Papiertuch kaputt gemacht. Einfach 24h einweichen und dann rein in den Blumentopf. Fertig 😎
Terp1
Terp1
@kardel, ich finde du gehst den richtigen Weg. Das Meiste lernt man aber beim Machen. Heißt, das funktioniert nur, wenn du das Gelernte auch gleich umsetzen kannst und du die Erfolge siehst. Das Wichtigste für den Start ist auf jeden Fall ein gutes Substrat. Ich selbst nutze einen Mix aus 60% Light-Mix (BioBizz), 30% Coco (BioBizz) und 10% Wormcastings (auch von Biobizz). Damit hat die Pflanze schon mal einen guten Start. Dann kommt die Bewässerung (Qualität des Wassers, PH-Wert und dein Gießverhalten sind hier wichtig). Gibts genug Infos im Netz zu. Wenn du spezielle Fragen hast, stelle sie mir einfach (am besten per PN). Ich versuche sie dir dann nach bestem Wissen und Gewissen zu beantworten. 💪😎 ps: Ja. Fuchsschwanz wird auch durch zu viel Hitze verursacht. Kann aber eigentlich durch jede Art von großem Stress kommen. In der Regel, ist es aber die Hitze.
kardel
kardel
@Terp1, Thanks man, i still try more and more method & setup for the growth session Im to far from afford whole system btw, last crop i got only about 20-30g per plant autos and photo was died by heat (it above 38°c that time) and every grow is going to have foxtail (lack of fertirized and too hot i guess?) I try to understand the process before putting more stuff so maybe i have to learning on how to feed and monitoring the plant first Funny story i lost one seed during germination in soil and cannot find it so i got a trauma from that🤣
Terp1
Terp1week 16
Da ist doch ordentlich was runter gekommen. 👌Glückwunsch
kardel
kardel
@Terp1, 💪 you're the one who's influent this growth haha
espaniabudz
espaniabudzweek 15
can’t wait for the smoke review 💚🍃
kardel
kardel
@espaniabudz, I cut back and dry buds that not has mold(after inspected 0mold spread). after dry she got little 'sweetness' smell like fresh blueberry, smoking right now lol. not have effect much, will give a full review after this dry and cure is done 👌