Pineapple Express Auto by Seed Supplier

3
2
2
6h ago
Start at 1 Week
G
Germination
15h ago
Nutrients 1
Alfa Boost
1 mll
PsicoOne My last Pineapple Express from Seed Supplier was really delicious. After just over a month of curing, the buds developed a really lovely flavor. It was also really smooth on the throat when smoked—no scratching or anything like that; it was actually quite soothing. So it was time to try the second seed from the sample pack and order another 20 seeds. I store my seeds in the fridge in an airtight container with Oxy-Guard, which is supposed to absorb moisture. As soon as I take a seed out, I put it straight into the prepared solution, a mix of 1 L of water and 1 ml of Alfa Boost. I let the mixture sit for a little while after mixing so it can reach room temperature before I pop in the seed, which has just come out of the fridge. I leave the seed in the solution for 36 hours, then soak a coco pellet in the same solution. I squeeze the pellet out a little so it isn’t too wet, then place the already-cracked seed in it. The whole thing then goes into my DIY mini greenhouse (an empty tea tin) and into a warm spot—which is, of course, my tent at around 25°C. After another 2.5 days, the little one had already popped up; it was obviously in a hurry. The whole process took just 4 days.
2 likes
1 comment
Share
Used method
Peat Pellet
Germination Method
1
Week 1. Vegetation
6h ago
5.5 cm
Height
18 hrs
Light Schedule
25 °C
Day Air Temp
6.4
pH
200 PPM
TDS
60 %
Air Humidity
20 °C
Solution Temp
22 °C
Substrate Temp
20 °C
Night Air Temp
20 liters
Pot Size
0.14 liters
Watering Volume
127 cm
Lamp Distance
550 PPM
CO₂ Level
Nutrients 8
Bactrex - Bio Tabs
Bactrex
1 mll
Mycotrex - Bio Tabs
Mycotrex
1 mll
Organic Fertiliser Tablets - Bio Tabs
Organic Fertiliser Tablets
1 mll
PsicoOne I’d like to mention once again that for the amounts of fertilizer or other additives I use, please refer to my text. GrowDiaries is missing the option to enter amounts in grams or pieces, so I always only use ml/l in the display above. For the CO² reading, I used the lowest value of 550 PPM. That’s how much I have in the tent even when the windows in my apartment are wide open for ventilation. Otherwise, the CO² level usually fluctuates between 600 and 800 PPM. For the substrate, I use 20L of Light Mix, which I mix with 2L of BioBizz worm humus. I then add 20g of Dynomyco, 100g of Startrex, and 60g of Silicium Flash to this 22L substrate mix. Once everything is mixed well, I fill a 20L Airpot with it. As I fill it, I press the soil against the outer wall of the Airpot so it reaches the small indentations along the sides and no extra air pockets form. I do this from the bottom up. Once the pot is a little over 1/3 full, I press the soil down a bit more firmly so that the pot is 1/3 full after pressing. Then I keep filling it, making sure to press the soil against the sides again. Once the pot is almost full, I press down very lightly. I fill the rest of the pot very loosely and don’t fill it completely. Finally, I leave a hollow about 10cm deep and wide, fill it with plain Light Mix with no extras, and keep it loose. I deliberately made the hollow close to the edge so I can train her more easily with LST later. Day 1 - I’m leaving the little one in her greenhouse for another day. Day 2 - After filling the pot as described above, I make another small hole in the plain Light Mix, big enough for the coco pellet. I sprinkle a little Mycotrex over the hole and the pellet with the root, then carefully plant it. I water it in with a mix of 1L water, 5ml Orgatrex, and 1g Bactrex (pH 6.4). Day 5 - Today I tried the Bio Tabs Boom Boom Spray on the little one. It wasn’t really part of my plan, since I usually only use it from the middle of week 2 or 3, after I’ve pruned and trained the plant for the first time. But I had just finished one, so I thought I’d give it a try. Looking back, though, I think you can skip it at this stage. Day 7 - Nothing to do so far except the regular measurements at the end of the week. She’s 5.5cm tall and 127cm from the lamp. The Spider Farmer SE-3000 is running at 100%, and the plant is getting about 200 PPFD. Since I can’t keep the humidity at an optimal level, I’m keeping the plant under a dome to compensate a little, so I can’t measure the actual PPFD underneath it. But I think it should be fine.
1 like
1 comment
Share
Used techniques
Transplantation
Technique

Login

2 comments
Sort by
popularity
popularity
newest
oldest
squalino
squalino commentedweek 010h ago
Here we go, good luck ❤️
PsicoOne
PsicoOne commented6h ago
@squalino, thank you.
Enjoying this diary? Follow for more updates!
Prefer the old Diary view?
Go back to the old Diary view