+1 strain
Clones like it warm and very humid.. i cut the long leaves, so its easier for them to concentrate in the Roots. Give your Girls a tansparent dome ( half of a Plasticbottle) and put them on a warm place with light
likes 3
By continuing to use the website or clicking Accept you consent to our cookies and personal data policy. For details please see Privacy Policy
Accept
Second Grow - Aero - AlphaKronik F2
Follow
7Indoor
Room Type
ScrOG
weeks 6-20
Defoliation
weeks 6-7, 9-10
LST
weeks 6-7
Topping
weeks 6-7
Grow Conditions
Week 17
Flowering
66.04
cm
inch
Height
12 hrs
Light Schedule
11+ conditions after
Login
Grow Technique Usage
ScrOG
Technique
Commented by
ThatsMyPurse5 years ago
3/30/2020 - Last week I really pushed the upper limits of PPM and feeding. I made the decision to lower it. The high values seemed detrimental now, buds were showing some odd foxtail tips and leaves were looking burnt. Backing way off for the next two weeks while the AlphaKronik finishes. Likely that pics are going to look very different soon, the Blackjack I don't talk about much looks ripe at the tips, waiting for the rest of the cola to catch up and then she's coming down. Since lowering the nutrients, the Alphakronik is started to give off more of its fuel-driven stench. This harvest could end up a little lighter, with smaller buds overall, but the quality will more than make up for that.
I popped some seeds on Friday last week, three of four have popped, with one potential dud. This close to harvest means I'll have a little time to do some system maintenance and re-design while these mothers grow out a little.
Stuck at home this week, I'm looking at getting a couple oz of trim from another grower and doing a dry ice run maybe taking that to the press. Just kill my boredom.
likes
4Similar Diaries
6 weeks
First Soil Grow - Black Muffin F1 / Quicklato Sherbet - FEMINIZEDLegendaryseedthumb
2 strains22 minutes ago · 2 comments
Grow Questions
ThatsMyPursestarted grow question 5 years ago
Any way to speed up clone rooting? Have treated the stem portion with butyric acid. About a week in and my clones have not rooted.
Solved
Techniques. Defoliation
like
Grey_Wolfanswered grow question 5 years ago
@ThatsMyPurse yes I find it works a lot quicker if you provide the optimum temp and humidity so I use a heat mat with a heat controller set at 23c inside a germination/humidity box with clear plastic lid and then I reguarly mist the inside with water from a spray bottle .
ThatsMyPursestarted grow question 5 years ago
How to maximize terpene production? I'm growing a strain that is supposed to be super stinky, and I so desperately want to get the full potential from this Chemdog cross. What does the plant need for producing terpenes and thiols? (My setup requires fully dissolved nutrients.)
Solved
Feeding. Schedule
like
OutForRealanswered grow question 5 years ago
-You can use additives like molasses and many others.
-You can play with the spectrum as they are spectrums that helps to have better veg and others to have better flo
-You can apply a dark period at the end of flowering.
-You try to reach the best values possible for your environment parameter.
-You need to have a stable genetic because cross can lean on the mother side or on the father side so if one smell good and the other not then you'll have to make a selection.
-You need to know when to harvest ( my cheese was at a perfect terpenes level when the trichomes were cloudy but an average smell when harvested with amber trichomes) , the harvest widow is important.
ThatsMyPursestarted grow question 5 years ago
Started cutting today. Hung 1 plant in big chunks, left lower buds on.
Should I dry everything together? -or- Should I trim lower buds and make bubble ASAP?
Solved
Other. Harvest - Drying
Other. Harvest - Curing
1 like
Epokwananswered grow question 5 years ago
Those buds look amazing! Great grow :)
I usually take my trim and freeze it fresh. When I'm ready to make hash, having the material already frozen will help the trichomes fall off. Perhaps freeze the trim from the first batch and join it with the second when it's ready?
Comments
Show by Week
Sort by
popularity
popularity
newest
oldest
Mrs_Larimarcommentedweek 15 years ago
ThatsMyPursecommented5 years ago
@Mrs_Larimar, Thanks for the information. I've pulled them from the system back into a cloning tray and added a little heating pad under the tray. It's definitely high humidity in there, flooded some of the grooves in the tray to make sure of that. Going to wait until I see roots before moving them this time-- if they make it, but I've seen clones take longer to root.
Thank you again, love this community!
like 1
CRiSPrGrowcommentedweek 15 years ago
great diary here, learning loads ! 🚀
likes 2
MiPotFarmcommentedweek 135 years ago
Looking good! Is your carbon filter ventless?? I need to get one setup
like 1
MiPotFarmcommented5 years ago
@ThatsMyPurse, we’ve been growing in it all winter lol! But we currently have 5 in full bloom and the rest are young ! We got a perfect rotation to keep it full between all stages of life! But the smell is starting to take over lol that’s why I’m interested in getting a filter system! But I’m gonna check into it and probably just do something like you said just hole cut what size I need in the door and just vent it out into the bigger room to keep the smell down thanks! 🙏
like
ThatsMyPursecommented5 years ago
@MiPotFarm, Ah, not sure if you are planning on doing your complete grow in the closet, but you won't have much need for a filter during Vegetation. I grow out my mothers for cloning in my closet and just leave the door cracked with a fan running. If you need to drill/cut a hole, doors can be pretty cheap. There's always Home Depot & Lowe's, but you could also check for a larger resale shop. One resale shop in my area has TONS of doors for super cheap. Just a suggestion
like 1
MiPotFarmcommented5 years ago
@ThatsMyPurse, yea I guess I should of been more descriptive! I was wondering if it was running out to fresh air to vent like through the wall or if you were just venting it out of the grow room into another? I ask because I’m putting one in my closet grow I’m using but I don’t want to vent it to the outside through my wall because I’m adding a grow room in my garage to be more permanent and don’t want to be putting holes in my house lol! So you said your venting yours into a bigger area I think you still did answer my question! Thanks
like
Load more (1)
Denzulcommentedweek 205 years ago
Oh baby are those some gorgouse looking buds. So beautiful. Spectacular work growmie. Keep doing what it is you've been doing and may the ganja garden gods give you good fortunes until the end
like 1
Denzulcommented5 years ago
@ThatsMyPurse, that's why I am here. None of my local friends grow so this is the only place to share my passion with other like minded folks.
like 1
ThatsMyPursecommented5 years ago
@Denzul, Thanks for the encouragement! I've really enjoyed growing these girls and I'm very happy with them. It's really nice getting these comments, I don't know any growers where I live to pal around with.
Gonna start chopping after a quick meal!
like 1
Ferenccommentedweek 175 years ago
Really cool mate @ThatsMyPurse
like 1
Ferenccommented5 years ago
@ThatsMyPurse, Thanks mate! Well, I have got limitation so if I had better circumstances I would go crazy trust me ! :) Apreciate mate! 😇🤗
like
ThatsMyPursecommented5 years ago
@Ferenc, Thanks for checking it out! I looked at your grows and it looks like you really know what you're doing!
like 1
MadeInGermanycommentedweek 135 years ago
looks great :-) I also just run an aero grow 👍
like 1
MadeInGermanycommented5 years ago
@ThatsMyPurse, Hi I pretty much poured out all the fertilizer :-) in the end he became Canna. every now and then I grow with a different fertilizer but rarely. at canna, the values remain very stable, especially in aerophonic :-)
like 1
ThatsMyPursecommented5 years ago
@MadeInGermany, Awesome! Thanks for checking mine out. How are you liking the Canna line of nutrients? I've only used GHE, but I like to try different formulations.
Great looking plants!
like 1
Resin_Randycommentedweek 125 years ago
Awesome job🍀👌🏼
like 1
Resin_Randycommented5 years ago
@ThatsMyPurse, indeed they does
like
ThatsMyPursecommented5 years ago
@@Resin_Randy, Thanks for checking it out. Still in disbelief that it works, loving this current grow. Genetics make a BIG DIFFERENCE!
like 1
Ferenccommentedweek 185 years ago
Lovely colourful:) @ThatsMyPurse
like 1
ThatsMyPursecommented5 years ago
@Ferenc, Thanks again! They look much better int he photos. IRL, the foliage is making me nervous that these won't ripen in time! I'm sure it will be fine though. Have a great day!
like
smoking_hills9commentedweek 125 years ago
Fist time seeing some one growing aero. Well done man👍 plants looks amazing 🤩
like 1
ThatsMyPursecommented5 years ago
@smoking_hills9, Thanks for checking it out. It was a dream project when I was younger, but too risky/illegal to attempt. I'm glad I got around to it, and I'm still surprised it actually works.
like 1
Wachsemiliancommentedweek 25 years ago
ur set up looks fantastic dude ...the roots speak for themselve...good job😎👍🙏
like 1
ThatsMyPursecommented5 years ago
@Wachsemilian,Thank you! Good to see you stopping by again. Your grows look amazing, I gotta get on your level with the pics.
like
Wachsemiliancommentedweek 15 years ago
good luck with ur grow😎👍
like 1
ThatsMyPursecommented5 years ago
@Wachsemilian, I got too eager and set myself back. D'oh!
Pulled the clones from their little chamber too early and now it's been two weeks. I put them back in the lidded flat for high humidity two days ago. They are just starting to get rooted... or at least they are still alive. Not sure if they'll take. Input would be appreciated from a pro!?
like 1
MadeInGermanycommentedweek 25 years ago
Beautifull 😍😍😍
like 1
Sataxcommentedweek 202 months ago
Good job mate, aero its the best way to grow!
like
joeymackcommentedweek 25 years ago
where can i find the sprayer heads and the drainage pump?
like
joeymackcommented5 years ago
@ThatsMyPurse, thank you appreciate the help, i have the same pump as well but i wasnt really happy with the droplet size(the same sprayers you started with) so im looking for better sprayers! thank you again i really appreciate the help.
like
ThatsMyPursecommented5 years ago
@joeymack, I ordered everything for the aeroponics project on amazon; the lights were ordered on alibaba.
All research for the main pump points to the Aquatech 8800-- it is used for pressurized R/O water systems and NSF rated. The pumps I'm using for draining the bins are some inexpensive 9V arduino pumps I found on amazon. The nozzles are poultry misters, but they were hard to find inexpensive fittings that contained no brass. If you aren't as obsessive about droplet size, the barbed style ones from Mist King are more convenient to work with -- just jam them into the end of your compatible tubing.
Good luck, have fun, be safe! (Maybe the other way around)
like
Sataxcommentedweek 202 years ago
Aeroponic its so nice, i finish my first grow with aero and its just wooooo, you cant make mistakes…..
like