Week five all the plants are doing great. They all grew think upwards of 10 inches this week. Had a little problem with leafhoppers bought me seed meal and name seed oil hopefully that will fix leap poppers problem. All the girls are doing a great fifth week in soil excited to see next week..

same as last week nothing to special just growing healthy on her bat poo feed coming up nicely I think other people might see differently but that's small grow space C4Matic and friends .

Easy grow. Sold no fuss strain. Big buds. This is probably my favourite strain for consumption. Very head high but powerful. One of the few strains that has absolutely 0 after effects. No hangover. No stupids. The larff and shake made excellent coconut oil for Nanaimo bars.

She's looking good, onto flush then high dose Pk then half nutrients then onto regular

hängt oft ab, verträgt die Hitze nicht so gut, wie die Oreoz

Strawberry Banana was chopped at 17 weeks and dried for 12 days..104 grams on the scale which is roughly 3.7 oz…Pretty awesome for one plant I think! She took me a few hours to trim and let me tell you I was so impatient to jar her up during the drying process. She smells super piney idk that I would say I get any fruity aroma but dank regardless! Her appearance does lack a little due to my burning her with nutes at week 10..kinda mad at myself for that but she still has plenty of bag appeal. I just know she could’ve been frostier! Got a good amount of kief from the trim as well. Overall my best plant from my first grow. She has taught me so much and I’ll never forget her!

Gracias al equipo de Seedsman Marshydro XpertNutrients y Trolmaster sin ellos esto no sería posible. 💐🍁 Tangerine Snow F1 Fast: Esta gran cepa es un cruce de cuatro vías 75% sativa de (Boost x Tangelo) con (Lavender x Power Plant). Este híbrido Fast F1 proviene de la genética Cali y cuenta con excelentes terpenos cítricos, alta producción de resina para extractos, altos niveles de THC, muy buenos rendimientos y excelente resistencia al moho. Tangerine Snow F1 Fast se puede cultivar tanto en interior como en exterior. Los tiempos de floración en interiores son de entre 8 y 10 semanas, mientras que el tiempo de cosecha en las latitudes del norte es en septiembre, mientras que en el hemisferio sur los productores cosecharán durante marzo. Las regiones climáticas recomendadas son cálidas, secas, húmedas y cálidas. Se trata de plantas altas, semiramificadas, que superan los 200cm y que presentan un alto vigor con muy buena uniformidad. Al igual que muchas otras variedades con fuerte dominancia sativa, Tangerine Snow F1 Fast ofrece una excelente resistencia al moho, así como a las plagas y enfermedades de las plantas. La combinación de terpenos cítricos y mucha resina la convierten en una cepa de muy buen extracto, cuyo método de "lavado" produce muy buenos rendimientos de hachís. El perfil de terpenos cítricos recuerda a las mandarinas y mandarinas y también tiene notas dulces. La producción de THC ha sido verificada en laboratorio en un fuerte 24%, mientras que el CBD es bajo. El efecto es edificante y energizante, perfecto para usar durante el día y las primeras horas de la noche. 🌻🚀 Consigue aqui tus semillas: 💡TS-3000 + TS-1000: se usaran dos de las lámparas de la serie TS de Marshydro, para cubrir todas las necesidades de las plantas durante el ciclo de cultivo, uso las dos lámparas en floracion para llegar a toda la carpa de 1.50 x 1.50 x 1.80. https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 💻 Trolmaster Tent-X TCS-1 como controlador de luz, optimiza tu cultivo con la última tecnología del mercado, desde donde puedes controlar todos los parametros. https://www.trolmaster.com/Products/Details/TCS-1 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 📆 Semana 6: Buena semana, ha habido sol agradable y buenas temperaturas, empieza q tomar fuerza. Se puede apreciar su aroma tangie. Mantengo las dosis de nutrientes a 1/3 de lo recomendada por el fabricante al estar en suelo virgen ☘️🌲🌳.

Bueno familia ya finalizamos con el proyecto de las Runtz de seedstockers, son una cepa bestial. La verdad que el secado muy bien 9 días en Malla y a los botes, 40% humedad y 21 grados es la temperatura ambiental que han tenido en el secado, aparte deshumidificador enchufado 24 horas al día. En resumen la cepa es muy fácil de cultivar, el germinado se me resistió igual es complicado el germinado pero el resto es simple resistente fácil de alimentar pienso que es rápida los tricomas ya estaban hechos y se me hecho el tiempo encima. Por lo demás de miedo os la recomiendo. Gracias a Seedstockers, Agrobeta y Mars hydro, sin ellos este proyecto no sería igual 🙏. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Buenos humos 💨💨💨

This plant is a beast I finally got the nutrients down and got rid of the light color growth it was having the plant would have been great to have a clone it is definitely something worth growing again

I changed the reservoir and set the pH to around 5.3 and reduced the nutrients by 5ml/g. I just realized I've been adding far far fewer nutrients than I thought. I've been using 30ml in a 5 gal bucket (probably 4.5g volume) but I should be using 30ml/g so 4x as much. I'm going to leave it for now but I should probably start adding more nutrients. I took the wires I was using for LST off the bucket so it isn't stressed during flower and so it's easier to change the water. I'm taking off fan leaves that are blocking bud sites if I can't tuck them away. It grew a crazy amount today, so many little pistils came out. It's an exciting time. July 10 she thirsty. I added half a gallon of water and a full 30ml of each nutrient. That should bring us close to half the recommended nutes. I'll probably change the full res out and give 3/4 nutes sometime this week and go up to full strength next weekend if everything looks OK. https://www.remonutrients.com/calculator/ I just looked at my chart again and I think I was right the first time. I just added more nutrients for no reason. I added another half gallon of water and checked ppm and pH. Ppm is 1050, pH is 5.8. Gonna keep an eye on it through the day and see what happens. 305pm pH 5.8 ppm 1200 July 11 pH 5.8 ppm 1300. I'll add some plain water after the res goes down a bit more. Looks like the plant isn't using all the available nutes and is probably leaching some. She looks good though. Loads of vertical growth over the past week, now really going hard making bud sites. I'm going to see how this nute situation goes before doing any major defoliation or pruning. Leaf temp was 29 on the central cola so I turned up the fans and raised the light a bit. July 12 ppm down to 1200, pH still 5.8. Looks like it's going to be ok. July 13 ppm 1300 pH 6.2. I dropped an entire oscillating fan on my plant today. I broke 4 stems almost clean off. 3 appear to be surviving through duct tape and wire. The biggest one appears to be a casualty. I'm pissed. But the cabinet is coming together. Once it's perfect this kind of thing won't happen. I salvaged a piece of plywood yesterday and hand sawed the whole thing to fit as a door.

Sie ist noch nicht ganz bereit fürs toppen, aber ich schneid ihr trotzdem die Haare.

Day 120 Mon PH 5.9 EC 0.4 PPM// DLI 6h 27.3 PPFD/ 1270 Water 18c Day 121 Tue PH 6.0 EC 0.4 PPM// DLI 6h 27.3 PPFD/ 1270 Water 18c Day 122 Wed Add water PH 6.0 EC 0.5/0.3 PPM// DLI 6h 27.3 PPFD/ 1270 Water 18c Day 124 Add water PH 6.0 EC 0.4/0.2 PPM// DLI 6h 27.3 PPFD/ 1270 Water 18c Day 126 Sun PH 6.0 EC 0.2 PPM// DLI 6h 27.3 PPFD/ 1270 Water 18c

The weeks continue to progress smoothly. They are beginning to show the "fall fading" on the fan leaves. I have been feeding them 3 liters a piece, 1nute/2plain ph'd to 6.6 watering cycle.

7/28/19 --Super happy to see the plants doing this well. Ive found that every other day feeding is the best for these specific plants. Im a big proponent of only watering the plant when it signals it is ready for watering. The least possible amount of induced stress for these plants is the goal for me. Cheese seemed to be totally unaware of the FIM that was done on it, as it showed not even 1 sign of stress post FIM. Cream cookies is another story, she's quite sensitive to absolutely everything--including watering. I am super happy to see that the last fan leave on the 5th node has 9 leaves--a really good sign that the plant is doing extremely well. The more leave nodes on each leave the healthier than plant. There are zero signs of nutrient burn at all. It was difficult at first to see if the slight bending of the leaves was due to nutrient burn, but I later figured out that the leaves were pressing against the side of their pot and as a result bending--wasnt nutrient burn. Ive been varying the pH widely each week--with the attempt to be as random as possible. I want to make as many nutrients available to the plant as absolutely possible. I really am loving the Advanced Nutrients Sensi line. Im growing in coco but I bought the nutrient mix not designed for coco with the understanding there might be some potassium issues down the road. But otherwise as a chemist by profession, when I heard about the pH perfect line I was rightly skeptical. It will balance your solution to the correct pH range (5.6-6) IF you start with dead neutral pH 7.00±0.05 water with no dissolved salts (distilled water). the distilled water I've been buying (from Walmart) clocks in on the pH meter at around 7.6-8.6 which will cause the pH perfect technology to neutralize some of the dissolved ionic species and bring the pH well below safe range for cannabis. Ive found that if you pH the distilled water to 7.00--add your Ca/Mg/Fe, THEN add the pH perfect technology the range will be much more suitable. It was kind of annoying since my pH down is so much more concentrated than my pH up. Me problems I know but still annoying. --One of my amazing collages at work is going to water both babies today with Week 4 nutrient solution even though we are technically in week 5. My vacation has prevented me from mixing the solution to feed. --This vacation has brought so many new automation ideas to coco coir growing. Ive been developing a hypothesis that involves what I call the "level of droop age" and its correlation to plant thirst. It began when I was growing in soil and needed a better way of telling when to feed the plants instead of a fixed schedule, which seemed to be giving way too much water to the plants. ---Ive developed a "droop scale" which can be directly correlated to plant thirst. Ive also found that very happy plants that do not want water will go through a natural droop cycle as night approaches. I take this as the plants time to grow out its root system (happens at night). By the morning the leaves are pointing up in what I call "leaves up loving life" ---So the scale I've developed is kind of arbitrary but it does a really good job imo if you become very familiar with your plants. ---The scale ranges from -10 (the most droop in the leaves every observed) to +10 (the most extreme leaves up loving life ever observed). the scale is out of 10 not 20. ---lets say that you watered your plants today, and their leaves were at a -7/10 droop (what when I water my plants). If you water them you should observe no increase in droop--in other words after watering the droop should only improve not regress. If the droop increases after watering your plants wanted a little more time before their feed--so alter your droop scale until you find the level of droop that when feed causes only an increase in the droop. 6 hours after watering you plant droop should be >+1/10. The next day you should see your plants at least at +5/10 droop. ---Merging this scale with automation is going to be difficult as ill have to use an open source machine learning AI to learn when the plants droop is sufficient enough to justify a watering. I hope to set up the system to be automated or manually operated over the cloud. ---Using a Raspberry pi and an Arduino as well as a whole set of motor control boards and sensor boards I hope to put together an integrated system that can detect when the leave droop reaches critical levels using a camera, and feed accordingly. Ive been all over the internet and all automated grow projects rely on soil moisture sensors which only penetrate <4 inches into the substrate. This doesn't cut it for me as the root ball of the plant is way below that 4 inches of the sensor, yielding readings which only pertain to the top layer of soil, which just so happens to dry out the fastest. ---Im going to keep my grows at 2 plants each from no on--and I plan to make an automated system for both plants which can control watering to both plants individually. Im currently trying to figure out the best way to track volume of water dispensed. A flow meter with a know diameter tubing and a known diaphragm pump rate seems to introduce all sorts of inaccuracies into the mix. I think im going to design an automated measuring system that uses an ultrasonic distance sensor coupled with a camera and AI to fill up a the hopper to the desired volume of nutrient solution. ---I have all the hardware listed but im a complete dumbass when it comes to coding. My profession is chemistry, coding goes right over my head. I have an immense respect for coders as I honestly have no idea how you guys do it. Its like learning 15 different languages at once and using them all together. Blows my the ability of our society. The wide range of skills. Love it. ---If anybody would like to help me code this project it would be greatly appreciated. 7/30/19 -Cream Cookies is doing extremely well. FIM was a great idea. 4 new main cola sites came out of the FIM which im very happy about. The undergrowth also has caught up to the canopy. the canopy has a plethora of bud sites. Defoliation done to increase light to bottom branches. Largest fan leaves towards the canopy removed. FIM'ed leaves that opened up also trimmed, allowing more light to penetrate to those small bud sites. --Ive counted sites where main colas can form. Very happy with this HST I decided to do. --LST done and branches separated from each other so they can receive ample light. Thinking of adding supplementary 40W flowering bulbs for flowering. -Cheese FIM didn't work as intended but it did break the symmetry of the plant. One of the first branches has grown higher than the canopy and I had to tie it down using LST. Did some defoliation and going to do some LST later. --Some light stress spots on Cheese, makes sense since I wasn't physically at my apartment to raise the lamp. Before raising the lamp the plants were 14 inches from the light which is way too close. The closest it should be is 17 inches. Raised the lamp to 18 inches and spots are subsiding. --Being overly cautious ive increased the dose of Ca/Mg/Fe to 4 mL/gal incase spots are actually a Ca/Mg/Fe deficiency from explosive growth. 7/31/19 -Cream Cookies is showing beautiful pre flowers. Still recovering from light stress. Looks very similar to nutrient burn but only present in tip most growth suggesting light burn. 14 inches was way too close-vacation problems lmfao -defoliation done on both cheese and cream cookies to expose bud sites -LST done on both cheese and cream cookies to bring bud sites into the light -both plants fed 400 mL Week 5 nutrient solution-when I mix next weeks nutrient solution im going to reduce the concentration to 12mL/gal w/ 3mL/gal Ca/Mg/Fe. --I want to precent any nutrient burn plus plants are slightly stressed from defoliation and light burn from my vacation. -lamp raised to 19 inches to help aid in stress relief -plants are responding in a weird way to the watering. Not in a bad way-but in a different way--larger lower leaves are not drooping like in the past its just the much newer growth is drooping. Makes sense since newer growth has less developed support system. Makes me feel much better about my watering schedule. --Clawing which I suspected was due to light stress is getting better-especially after a feeding. 8/1/19 --Calcium deficiency just barely showing on midlevel fan leaves. Good thing calcium is a mobile nutrient. Going to readjust the nutrient solution ph to be 6.2-6.3. Been accidentally locking out calcium. --Defoliation done on both plants to expose more bud sites and to thin out the thick canopy so light can penetrate below. The hope is to defoliate correctly. If done right I won't have to lollipop. --Cheese has no preflowers yet--still in veg --Cream cookies looks like it started flowering. 2 preflowers were spotted earlier in the week. Surprised to see how fast the plant moved into flowering. Going to be feeding it with flower nutrients starting week 6. --Going to continue feeding cheese with veg solution until preflowers are observed.

Alaskan Purple auto has sprouted, and is getting acclimated. She is under the Medical Grow Mini Sun 2. 🤞🏻for a killer plant for the contest. Thank you Medic Grow, and Seedsman. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

I had a busy week moving the plants into NFT once roots started to show, put them into a tent give them a fan. Freebie seed shown slow recovery but decided to use it anyway.